|
|
03-31-2017, 05:53 PM
|
|
Member
|
|
|
Join Date: Jan 2014
Location: Bakersville NC
Posts: 402
Likes: 279
Liked 703 Times in 162 Posts
|
|
Model of 1950 target .44 special
I'm looking at a 1955 pre 24. It is in pretty good shape 90% or so. Target stocks (small football) and numbered box. The box is actually a model of 1926 box, I figured they found one and of course used up inventory. The gun has a factory letter. Sorry no pics but it has a little muzzle wear and high edge cylinder wear, no pitting or scratches. Stocks are pretty darn good with sharp checkering, probably the nicest set I've seen. My questions are how rare are these, and approximate value?
|
The Following 3 Users Like Post:
|
|
03-31-2017, 06:02 PM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,251
Likes: 11,929
Liked 20,598 Times in 8,583 Posts
|
|
Quote:
Originally Posted by Dillyp
Stocks are pretty darn good with sharp checkering, probably the nicest set I've seen. My questions are how rare are these, and approximate value?
|
Stocks are not rare but worth ~$250.
If you mean the package, also not rare but desirable. Model stamped 24s are scarce/rare.
Hard to guess value w/o seeing it or knowing the barrel length, but $1200 to $2000 for 6 1/2", and certainly more for any other barrel length if factory.
How much is being asked for it?
Are the tools and paper with it?
__________________
Jim
S&WCA #819
Last edited by Hondo44; 03-31-2017 at 06:04 PM.
|
The Following 3 Users Like Post:
|
|
03-31-2017, 06:41 PM
|
|
US Veteran
|
|
|
Join Date: Mar 2012
Location: E. Washington State
Posts: 5,497
Likes: 1,325
Liked 10,601 Times in 3,231 Posts
|
|
I have one I had cut down to 5".
picture uploader
It was a target model but I have other 44's for target shooting.
S/N S14745X Shipped December, 1955
Paid $850 a few years ago on GB.
__________________
Only difference Fool/Mule-ears
Last edited by STCM(SW); 03-31-2017 at 10:17 PM.
Reason: add
|
The Following 14 Users Like Post:
|
beagleye, bgrafsr, bruce5781, CajunBass, DGT, Fish827, Frank46, Gunhacker, Hunter Keith, Kinman, Muley Gil, ParadiseRoad, Texas Star, Wiregrassguy |
03-31-2017, 06:55 PM
|
|
Member
|
|
|
Join Date: Mar 2007
Location: ALBUQUERQUE, NM
Posts: 13,893
Likes: 8,098
Liked 25,425 Times in 8,550 Posts
|
|
Pictures when you can.
I have a 6.5 inch one at about 95% but don't have a pic on this iPad.
Mine is S147xxx
__________________
NRA LIFE MEMBER
Last edited by THE PILGRIM; 03-31-2017 at 06:58 PM.
|
03-31-2017, 07:29 PM
|
|
Member
|
|
|
Join Date: Jan 2014
Location: Bakersville NC
Posts: 402
Likes: 279
Liked 703 Times in 162 Posts
|
|
It's a 6.5". No tools or helpful hints
|
The Following 2 Users Like Post:
|
|
03-31-2017, 09:20 PM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,251
Likes: 11,929
Liked 20,598 Times in 8,583 Posts
|
|
S146567 July 1956 with the scarce stocks, no relief. 95 - 99%, Bright blue. Paid $1250.
What are they asking?
__________________
Jim
S&WCA #819
Last edited by Hondo44; 01-06-2019 at 01:11 PM.
|
The Following 22 Users Like Post:
|
bananaman, bgrafsr, bruce5781, CajunBass, delta-419, DGT, Doug627, Fish827, Frank46, H Richard, Indynick, Jim NNN, Kinman, LEO918, MCorps0311, mtgianni, Muley Gil, oysterer, ParadiseRoad, S&W Oldtimer, stroker, zipty6 |
03-31-2017, 09:38 PM
|
|
Member
|
|
|
Join Date: Jan 2014
Location: Bakersville NC
Posts: 402
Likes: 279
Liked 703 Times in 162 Posts
|
|
Asking 1200 firm.
|
The Following User Likes This Post:
|
|
03-31-2017, 10:14 PM
|
|
Member
|
|
|
Join Date: Jan 2014
Location: Bakersville NC
Posts: 402
Likes: 279
Liked 703 Times in 162 Posts
|
|
Here is a pic
|
The Following 14 Users Like Post:
|
bgrafsr, bill skebeck, CajunBass, cndrdk, D Brown, Fish827, Frank46, Hunter Keith, Jim NNN, Kinman, LEO918, Muley Gil, THE PILGRIM, Wiregrassguy |
03-31-2017, 10:29 PM
|
|
SWCA Member
|
|
|
Join Date: Aug 2010
Location: Death Valley, AZ
Posts: 2,813
Likes: 14,040
Liked 9,012 Times in 1,404 Posts
|
|
I have two high condition Pre Model 24s with 6 1/2" barrels and bought them within three or four months of each other in 2014. One is matte finish, at $1400 and the other is gloss finish at $950. The book says there is a premium for gloss finish - go figure.
__________________
Living a dream - S&WCA #2364
|
The Following User Likes This Post:
|
|
03-31-2017, 10:39 PM
|
SWCA Member
|
|
|
Join Date: Feb 2003
Location: Michigan
Posts: 7,874
Likes: 11,845
Liked 13,848 Times in 3,364 Posts
|
|
For $1200, I'd buy it. Looks nice, and with the box is a bonus.
How many more do you think you'll run into?
|
The Following 7 Users Like Post:
|
|
03-31-2017, 11:03 PM
|
|
SWCA Member
|
|
|
Join Date: Jun 2013
Location: Kentucky
Posts: 484
Likes: 1,518
Liked 2,911 Times in 236 Posts
|
|
Quote:
Originally Posted by moosedog
For $1200, I'd buy it. Looks nice, and with the box is a bonus.
How many more do you think you'll run into?
|
I agree completely.
__________________
Paul
SWCA #2864
|
The Following User Likes This Post:
|
|
03-31-2017, 11:25 PM
|
Banned
|
|
|
Join Date: May 2007
Location: Montana
Posts: 2,142
Likes: 2,064
Liked 3,137 Times in 644 Posts
|
|
Me too!......
|
04-01-2017, 01:23 AM
|
SWCA Member Absent Comrade
|
|
|
Join Date: Nov 2002
Location: SLC, Utah
Posts: 5,060
Likes: 739
Liked 3,275 Times in 1,282 Posts
|
|
S&W made 5,050 .44 1950 Targets and Model 24s between 1950 and 1966. They sure aren't growing on trees.
|
The Following User Likes This Post:
|
|
04-01-2017, 01:31 AM
|
|
Member
|
|
|
Join Date: Nov 2013
Location: Spokane, WA
Posts: 13,524
Likes: 1,184
Liked 18,473 Times in 7,310 Posts
|
|
Mine was cut to 4-1/2", and has a little more wear than you are describing, but on the other hand it came with a pretty decent set of Cokes....
|
The Following 14 Users Like Post:
|
19leben, bgrafsr, bruce5781, CajunBass, DGT, GunarSailors, Hunter Keith, Kinman, les.b, MCorps0311, S&W Fan, STCM(SW), THE PILGRIM, Wiregrassguy |
04-01-2017, 10:56 AM
|
|
Member
|
|
|
Join Date: Jan 2014
Location: Bakersville NC
Posts: 402
Likes: 279
Liked 703 Times in 162 Posts
|
|
What about the model of 1926 box? Did they make gold model of 1950 box? I've seen early blue boxes with an end label printed "model of 1950" but haven't seen a gold box. This one doesn't have a label, but is numbered to the gun.
|
04-03-2017, 08:27 AM
|
|
Member
|
|
|
Join Date: Jan 2014
Location: Bakersville NC
Posts: 402
Likes: 279
Liked 703 Times in 162 Posts
|
|
test post sorry
Last edited by Dillyp; 04-03-2017 at 08:30 AM.
|
04-03-2017, 08:40 AM
|
|
Moderator
|
|
|
Join Date: Dec 2002
Location: Indiana, USA
Posts: 9,408
Likes: 1,323
Liked 30,540 Times in 4,375 Posts
|
|
Some of the Model of 1926 boxes had a sticker indicating the 1950 Model. See photo below. I don't focus my collection on 44 Specials, but I don't remember seeing a gold box for a 1950 44 Target.
Bill
|
The Following 13 Users Like Post:
|
bgrafsr, bill skebeck, bracebeemer, bruce5781, CajunBass, DB404, Dillyp, H Richard, Hunter Keith, Jim NNN, les.b, THE PILGRIM, Wiregrassguy |
04-04-2017, 10:02 AM
|
|
Member
|
|
|
Join Date: Jan 2014
Location: Bakersville NC
Posts: 402
Likes: 279
Liked 703 Times in 162 Posts
|
|
Quote:
Originally Posted by Doc44
Some of the Model of 1926 boxes had a sticker indicating the 1950 Model. See photo below. I don't focus my collection on 44 Specials, but I don't remember seeing a gold box for a 1950 44 Target.
Bill
|
thanks. ive concluded in my research that a printed label was used. No label is present on this one, but that's not saying much as the box is rougher than a night in jail.
|
04-04-2017, 03:27 PM
|
|
US Veteran
|
|
|
Join Date: Feb 2003
Location: Homerville, Ohio
Posts: 5,407
Likes: 28,681
Liked 9,263 Times in 2,384 Posts
|
|
S144281, all matching. Shipped April 1955. Approx. 98%. Paid $1400.00 in 2010.
Last edited by bgrafsr; 04-04-2017 at 03:30 PM.
|
The Following 6 Users Like Post:
|
|
04-04-2017, 04:46 PM
|
|
Member
|
|
|
Join Date: Jul 2010
Location: Spokantucky
Posts: 4,132
Likes: 10,415
Liked 6,948 Times in 2,355 Posts
|
|
I would be all over that one, they ain't getting any cheaper. If your just looking at it as a speculation I still don't think you would get hurt at that price, if you like S&W revolvers JUMP! I keep waiting for the so called market to flood with all the old guys unloading their collections similar to what your experiencing, you'll kick yourself if you pass that one up...I guarantee it.
|
The Following 3 Users Like Post:
|
|
05-30-2017, 06:01 PM
|
Member
|
|
|
Join Date: May 2012
Location: Big Sky Country
Posts: 74
Likes: 204
Liked 84 Times in 38 Posts
|
|
I inherited my dad's 1950 Target (6.5", Coke bottle grips, gold box with tools and vapor barrier paper). Stickers saying 1950 Target covered the places on the gold box saying 1926 Target. One has fallen off, and after looking at the back of it, I'm guessing they were glued on with a water base glue, which gradually "fossilizes" and come loose. BTW, below the front sight on the rub are several pin prick spots of rust. I'd always assumed Dad got some blood on it from a blacktail deer, until I noticed the same type of rust spots on two other 6.5" 1950 targets; one was for sale at Capital Sports in Helena four or five years ago, and the other was advertised on one of the Internet gun auction sites a couple of years ago. I'm speculating that rust is the result of a factory sight installation problem (soldering flux? Who knows?).
|
The Following 2 Users Like Post:
|
|
05-30-2017, 07:25 PM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,251
Likes: 11,929
Liked 20,598 Times in 8,583 Posts
|
|
DB404,
You're exactly right. In that period it's well known that S&W had a problem of not leaving the guns in the neutralizing solution long enough after bluing. The barrel was blued with sight installed. Eventually bluing salts leached out and caused the rusting spots. Smith replaced many barrels at the time. That's the bad news.
The good news is, it won't get any worse after all these years. Soak in Kroil to remove rust spots. Assist with OOOO brass wool, (not steel wool).
__________________
Jim
S&WCA #819
|
The Following 3 Users Like Post:
|
|
05-30-2017, 07:45 PM
|
US Veteran
|
|
|
Join Date: Feb 2005
Location: The SW Va Blue Ridge
Posts: 17,545
Likes: 89,875
Liked 24,933 Times in 8,534 Posts
|
|
Welcome to the Forum, DB404.
You have a great revolver as the subject of your first post.
__________________
John 3:16
WAR EAGLE!
Last edited by Muley Gil; 05-30-2017 at 07:53 PM.
|
10-22-2018, 05:03 PM
|
Member
|
|
|
Join Date: May 2012
Location: Big Sky Country
Posts: 74
Likes: 204
Liked 84 Times in 38 Posts
|
|
Thanks, gentlemen. It is a great handgun. Dad used it and a Colt Officers Model Match .22 LR for NRA Bullseye competition; he also used it in the woods when working remotely as a timber cruiser and logging engineer. Carried it in a full flap holster to protect it from inclement weather and from getting bumped into trees, boulders and such. It still looks darn near like new. His every day woods load was made up of home cast Elmer Keith's 250 grain semi-wadcutter (that Elmer had designed for Lyman back in the 1920s, mold 429421 with the square lube groove) over 7.5 grains Unique with a standard large pistol primer. The bullets were cast from lead salvaged from discarded logging truck batteries, with tin added. It is quite accurate, even to long range; I witnessed him keeping most of a cylinder full (after figuring out the hold-over with a couple of shots) on a roughly 6' diameter granite boulder at a paced 400+ yards one time in Oregon's Blue Mountains. His paces were pretty accurate, as he was running section lines and timber sale boundaries all of the time on his job. He commented that his grandfather, who'd lead wagon trains from St Louis out to the west coast, told him that the old time cavalry troopers could shoot the horse from under adversaries at similar ranges with their .45 Colt 1873s.
Last edited by DB404; 10-22-2018 at 05:07 PM.
|
The Following 3 Users Like Post:
|
|
10-22-2018, 05:27 PM
|
US Veteran
|
|
|
Join Date: Feb 2005
Location: The SW Va Blue Ridge
Posts: 17,545
Likes: 89,875
Liked 24,933 Times in 8,534 Posts
|
|
Welcome back, DB404. Thanks for the back story on your .44 Target. A whole bunch of us .44 Special lovers also use Elmer's semi-wadcutter over 7.5 grains of Unique. It is usually referred to the Skeeter (Skelton) load, as Old Skeet used it more often than Elmer's hunting load of his SWC over 17.5 grains of 2400 (new solid head cases as opposed to using 18.5 grains in the older balloon head cases).
Do have your Dad's Colt .22 as well?
You do know that you are allowed to post more often than every 18 months!!!!!
__________________
John 3:16
WAR EAGLE!
Last edited by Muley Gil; 10-22-2018 at 07:44 PM.
|
The Following 3 Users Like Post:
|
|
10-22-2018, 06:47 PM
|
Member
|
|
|
Join Date: May 2012
Location: Big Sky Country
Posts: 74
Likes: 204
Liked 84 Times in 38 Posts
|
|
Thanks for your kind words. Life has a funny way of interfering with fun stuff, hence the break in posting. Yup, I have both revolvers, in their original boxes, with tools and papers. The Colt has the factory target as well. When Dad was in his early 60s I gave him a 6" 19-? with red ramp insert front sight for a birthday present which he carried in preference to the 1950 Target, as it was lighter and just as accurate (his words).
|
The Following 2 Users Like Post:
|
|
10-22-2018, 07:42 PM
|
SWCA Member
|
|
|
Join Date: Apr 2007
Location: North Alabama
Posts: 318
Likes: 42
Liked 328 Times in 65 Posts
|
|
Muley you might want to double check that load, I think that was 17.5 grains of 2400 .
|
10-22-2018, 07:46 PM
|
US Veteran
|
|
|
Join Date: Feb 2005
Location: The SW Va Blue Ridge
Posts: 17,545
Likes: 89,875
Liked 24,933 Times in 8,534 Posts
|
|
Quote:
Originally Posted by Nimrod44
Muley you might want to double check that load, I think that was 17.5 grains of 2400 .
|
THANKS! I corrected it.
That was my second episode of mentally passing gas tonight. I don't think I'll post anymore this evening.
__________________
John 3:16
WAR EAGLE!
|
The Following 3 Users Like Post:
|
|
10-23-2018, 11:20 PM
|
|
SWCA Member
|
|
|
Join Date: Dec 2002
Location: Illinois...via Arizona
Posts: 1,087
Likes: 660
Liked 2,034 Times in 222 Posts
|
|
Bill, I thought that Roy said that 1950 .44 Target were in burgundy boxes...
|
01-03-2019, 01:25 PM
|
Member
|
|
|
Join Date: May 2012
Location: Big Sky Country
Posts: 74
Likes: 204
Liked 84 Times in 38 Posts
|
|
I'm wondering if one of you all who has a copy of The Standard Catalog of Smith and Wesson could look up the manufacture date for S42822? I'm guessing 1952 or 3. Thanks!
Dave
|
The Following User Likes This Post:
|
|
01-03-2019, 01:44 PM
|
|
US Veteran
|
|
|
Join Date: Feb 2017
Location: Missouri
Posts: 2,929
Likes: 3,902
Liked 6,802 Times in 1,851 Posts
|
|
Quote:
Originally Posted by DB404
I'm wondering if one of you all who has a copy of The Standard Catalog of Smith and Wesson could look up the manufacture date for S42822? I'm guessing 1952 or 3. Thanks!
Dave
|
I'm not near my book at the moment but that ser# would be earlier than 1952. My.45 Model 1950 serial S94109 dates to May 1952 according to Mr. Jinks.
|
01-03-2019, 02:11 PM
|
US Veteran
|
|
|
Join Date: Feb 2005
Location: The SW Va Blue Ridge
Posts: 17,545
Likes: 89,875
Liked 24,933 Times in 8,534 Posts
|
|
Quote:
Originally Posted by DB404
I'm wondering if one of you all who has a copy of The Standard Catalog of Smith and Wesson could look up the manufacture date for S42822? I'm guessing 1952 or 3. Thanks!
Dave
|
You're either missing a digit or reading the SN wrong, which is easy to do. Post WW II N frame serial numbers started in the S75xxx range. It might be easier to read on the rear of the cylinder.
__________________
John 3:16
WAR EAGLE!
Last edited by Muley Gil; 01-03-2019 at 02:16 PM.
|
The Following 2 Users Like Post:
|
|
01-03-2019, 02:14 PM
|
|
US Veteran
|
|
|
Join Date: Feb 2017
Location: Missouri
Posts: 2,929
Likes: 3,902
Liked 6,802 Times in 1,851 Posts
|
|
Quote:
Originally Posted by DB404
I'm wondering if one of you all who has a copy of The Standard Catalog of Smith and Wesson could look up the manufacture date for S42822? I'm guessing 1952 or 3. Thanks!
Dave
|
Are you sure you have that number copied correctly? The number is below the range of the S serial prefix.
|
The Following User Likes This Post:
|
|
01-03-2019, 03:11 PM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,251
Likes: 11,929
Liked 20,598 Times in 8,583 Posts
|
|
Quote:
Originally Posted by DB404
I'm wondering if one of you all who has a copy of The Standard Catalog of Smith and Wesson could look up the manufacture date for S42822? I'm guessing 1952 or 3. Thanks!
Dave
|
Dave,
It appears you've left out the 1st numerical digit which would be a 1. That would indicate that it's from the 2nd half of 1956.
__________________
Jim
S&WCA #819
|
01-03-2019, 03:40 PM
|
Member
|
|
|
Join Date: Jul 2010
Location: Central VA
Posts: 8,660
Likes: 1,571
Liked 9,429 Times in 4,226 Posts
|
|
Quote:
Originally Posted by Muley Gil
Welcome back, DB404. Thanks for the back story on your .44 Target. A whole bunch of us .44 Special lovers also use Elmer's semi-wadcutter over 7.5 grains of Unique. It is usually referred to the Skeeter (Skelton) load, as Old Skeet used it more often than Elmer's hunting load of his SWC over 17.5 grains of 2400 (new solid head cases as opposed to using 18.5 grains in the older balloon head cases).
Do have your Dad's Colt .22 as well?
You do know that you are allowed to post more often than every 18 months!!!!!
|
MG,
Is that Unique load for balloon headcases as well? It sounds a bit stout to me... I’d be more likely to use that charge and bullet in a Mag case and drop back a grain in the Spl. Maybe I’m being a wuss, but I like Unique for mild target loads.
Froggie
|
01-03-2019, 04:04 PM
|
|
Moderator
|
|
|
Join Date: Dec 2002
Location: Indiana, USA
Posts: 9,408
Likes: 1,323
Liked 30,540 Times in 4,375 Posts
|
|
A serial number of S142822 would most likely date the revolver to the second half of 1955 to sometime in 1956.
Bill
Last edited by Doc44; 01-03-2019 at 04:06 PM.
|
01-03-2019, 04:13 PM
|
Member
|
|
|
Join Date: May 2012
Location: Big Sky Country
Posts: 74
Likes: 204
Liked 84 Times in 38 Posts
|
|
Thanks for the replies and yup, I was viewing it wrong. The serial # on back of cylinder is 134212.
Re 7.5 Unique with 250 gr Keith 429421 - its my understanding its gone out of favor with loading manual companies these days, but I will say I shot thousands of it through a Colt New Frontier with fine accuracy and no problems of any sort. The Lyman #45 from 1973 goes up to 8.0 grains of Unique with #429421. In solid head cases. IIRC, Elmer used to suggest 18.5 grains of 2400 in balloon head cases, and to drop that charge to 17.5 in solid head cases. The Lyman book cited above goes up to 17.7 grains of 2400 under the 429421. I shot a lot of the 17.5 load out of the New Frontier and it was powerful and accurate, chronographing about 1250 fps. Recoil was less with that load in the New Frontier than with the typical .44 magnum revolvers.
Last edited by DB404; 01-03-2019 at 04:28 PM.
Reason: gramar
|
01-03-2019, 04:27 PM
|
US Veteran
|
|
|
Join Date: Feb 2005
Location: The SW Va Blue Ridge
Posts: 17,545
Likes: 89,875
Liked 24,933 Times in 8,534 Posts
|
|
Quote:
Originally Posted by Green Frog
MG,
Is that Unique load for balloon headcases as well? It sounds a bit stout to me... I’d be more likely to use that charge and bullet in a Mag case and drop back a grain in the Spl. Maybe I’m being a wuss, but I like Unique for mild target loads.
Froggie
|
7.5 grains of Unique, topped by a 245 grain Keith semi wadcutter, in solid head cases, has been a recommended medium load for the .44 Special for well over 50 years.
6.5 grains of Unique with the same bullet is also a good milder load.
__________________
John 3:16
WAR EAGLE!
|
The Following User Likes This Post:
|
|
01-03-2019, 06:46 PM
|
|
Moderator
|
|
|
Join Date: Dec 2002
Location: Indiana, USA
Posts: 9,408
Likes: 1,323
Liked 30,540 Times in 4,375 Posts
|
|
S134212 would date to the first six months of 1955.
Bill
|
The Following 2 Users Like Post:
|
|
01-03-2019, 07:17 PM
|
|
SWCA Member Absent Comrade
|
|
|
Join Date: Jul 2002
Location: The kidney of Dixie.
Posts: 10,509
Likes: 49
Liked 13,410 Times in 3,290 Posts
|
|
Older thread but I missed it until today. Apparently S&W made a lot of 1950 44s in the 1955 or so period numbered between S140000 and S146000.
I have two, S140775 and S143776. When you quickly glance at the serials they may appear consecutive but they are actually 3,000 apart. The earlier one shipped April 26, 1955 (exactly one week after I was born) to Shapleigh Hardware in St. Louis and the other shipped August 8, 1955 to Woodward & Wright in New Orleans. One is bright blue and the other matte (S143776 is matte).
I bought them in 2005. A dealer (member here) had them in his flier. I had long wanted a 1950 so I called. The cut one was $950 and the (apparently) replacement one was $1050. I think these prices were high at the time especially given their modified condition but I wanted one. So bought the cheaper of the two. When my wife came in I explained and she said "Why didn't you buy both of them?" I admit I couldn't come up with a really good reason so I called the dealer back and bought the second one. Story was the pair had been together with the same owner since 1970. They came with numbered Magnas. I picked up some period Targets.
Both left S&W with 6.5" barrels. One was cut to 5" at some point and the other appears to have a 5" replacement barrel installed (S140775 is obviously cut). The former has the serial on it and the latter has no serial making me think it was sold as a replacement part. Any other ideas? They both have RR/WO sights and I assume they were added at the time the guns were modified. They also have wide, smooth triggers.
They shoot pretty good.
__________________
No life story has happy end.
Last edited by Art Doc; 01-03-2019 at 07:20 PM.
|
The Following 3 Users Like Post:
|
|
01-03-2019, 07:58 PM
|
Member
|
|
|
Join Date: May 2012
Location: Big Sky Country
Posts: 74
Likes: 204
Liked 84 Times in 38 Posts
|
|
Thanks, Bill. Greatly appreciated.
I doubt this thought would make SWAG category, but I wonder if the surge in production Art Doc speculated about had to do with the Model 29 knocking at the stable door, and Smith trying to move older parts inventory.
|
01-03-2019, 08:28 PM
|
SWCA Member
|
|
|
Join Date: Feb 2006
Location: Pikeville, Tennessee
Posts: 6,070
Likes: 923
Liked 9,964 Times in 3,661 Posts
|
|
Mine (S141071) was shipped September 9, 1955 (bright blue, 3rd Model box w/sticker), target grips).
Ralph Tremaine
|
|
Posting Rules
|
|
|
|
|