Smith & Wesson Forum

Go Back   Smith & Wesson Forum > >


Reply
 
Thread Tools Display Modes
  #1  
Old 06-13-2017, 10:04 AM
Driftwood Johnson Driftwood Johnson is offline
SWCA Member
An Interesting Old Triple Lock  
Join Date: Oct 2003
Location: Massachusetts, USA
Posts: 682
Likes: 0
Liked 528 Times in 129 Posts
Default An Interesting Old Triple Lock

Howdy

I picked up this old Triple Lock last week. Yes, saying 'old' Triple Lock is somewhat redundant, but this one has such a low Serial Number, 19X, that I think it was made in the beginning of the run in 1908. Almost no finish anywhere, the metal is mostly weathered to a 'battleship gray' color. Plenty of wear on the grips, which I suspect are original. I have not taken it apart yet, but all the numbered parts match. There is a star next to the SN indicating it went back to the factory for something, and under the left grip it is stamped 7.16 indicating it went back to the factory in July of 1916.

Anyway, I liked the gun, and I got it for a very low price for a Triple Lock.









But here's the interesting part. Rather than being marked 44 S&W SPECIAL CTG, like every 44 Special Smith I have, including two Triple Locks, the barrel is simply marked 44 S&W CTG. I had not noticed this at first, and was a bit perturbed when I did. I checked, and 44 Special ammunition chambers correctly in it, 44-40 does not, too wide. So I'm thinking maybe in the beginning S&W had not gotten around to stamping SPECIAL on the early guns. I suppose it could have been a 44 Russian, and the chambers opened up for 44 Sp, but I would have thought the marking would reflect that. I see no evidence in the chambers of them having been lengthened from 44 Russian length to 44 Special length.

Anybody ever seen anything like this on an old Triple Lock?





Despite the wear on the finish, the chambers and bore are nice and clean with almost no wear. I took it to the range on Sunday and fired a box of mild 44 Special reloads through it. It performed like a champ and is still very accurate.
Reply With Quote
The Following 92 Users Like Post:
-db-, 1977cutcher, 475OKH, 992B, amazingflapjack, arjay, Arm, BARgunner, Barrie, batman4706, beagleye, bengal fan, bigolddave, bigwheelzip, Bill Bates, bill skebeck, Bodiebadman, BornToLooze, boykinlp, browningcollector, bruce5781, Chuck24, codenamedave, Combat, CScott, damienph, DCWilson, delta-419, DGT, donadler, dot6, Doublegunner, Eddie Southgate, firemanhank, FPrice, goatsnguns, GunarSailors, H P Bushrod, Hoosier45, Hunter Keith, j38, jebstuart, jimwilkes, JohnRippert, jt3, K Frame Keith, ki5mc, Kinman, Kurac, LaVistaBill, LEO918, M E Morrison, Messer, Mike, SC Hunter, mojave30cal, moosedog, mrcvs, Muley Gil, Nasty Ned, nmxcop, Old Corp, opoefc, PerryLane, policerevolvercollector, quinn, ralph7, Ranger514, rbrbrb6, Richard Simmons, richcory, Russell Cottle, RWP123, S&WIowegan, S42N8, SailDesign, sandspur6, series guy, Shark Bait, sholsclaw, singleshot1, steelslaver, Sverre, SVT28, The Gila Bender, THE PILGRIM, THREEDFLYER, Tom K, tops, TripleLock, tug700, Widetrack, Wiregrassguy
  #2  
Old 06-13-2017, 10:15 AM
murphydog's Avatar
murphydog murphydog is offline
SWCA Member
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: Jun 2007
Posts: 16,146
Likes: 26
Liked 5,526 Times in 3,447 Posts
Default

Cool gun. Looks like there is some blue left where the barrel threads in and just behind the recoil shield - hope the seller called it "honest wear" .

I can't recall seeing another one this early with this caliber/chambering stamping, but you know someone here probably has. Agree the stocks are probably original; proper style and worn proportionally to the gun. Enjoy!
__________________
Alan
SWCA 2023, SWHF 220
Reply With Quote
The Following 2 Users Like Post:
  #3  
Old 06-13-2017, 10:17 AM
Hoosier45's Avatar
Hoosier45 Hoosier45 is offline
SWCA Member
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: Jun 2011
Location: Nashville TN
Posts: 325
Likes: 192
Liked 486 Times in 116 Posts
Default

Great acquisition and thanks for posting. Good question that I don't know the answer to? Seems logical to me that the marking could be different because it is such an early item. Are there any other odd markings on the grip frame other than the rework date? Like an "o", caliber stamp? Surprised if it was refinished that quickly by the original owner, but obviously we can't really tell at this point.
Reply With Quote
  #4  
Old 06-13-2017, 10:39 AM
Shark Bait's Avatar
Shark Bait Shark Bait is offline
US Veteran
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: Mar 2015
Location: New Mexico
Posts: 1,024
Likes: 1,707
Liked 2,196 Times in 516 Posts
Default

I would be thrilled to find one like that. Very nice!
Reply With Quote
  #5  
Old 06-13-2017, 11:26 AM
Dave T Dave T is offline
Member
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: Nov 2002
Location: Mesa, Arizona
Posts: 2,359
Likes: 500
Liked 1,318 Times in 427 Posts
Default

What a delightful find! Congratulations.

Dave
__________________
RSVN '69-'71
PCSD (Ret)
Reply With Quote
  #6  
Old 06-13-2017, 11:53 AM
History Guy History Guy is offline
Member
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: Jun 2017
Posts: 1
Likes: 0
Liked 3 Times in 1 Post
Default I have one

I have the same markings on my Triple Lock with a serial number of 100.
Reply With Quote
The Following 3 Users Like Post:
  #7  
Old 06-13-2017, 11:53 AM
mojave30cal's Avatar
mojave30cal mojave30cal is offline
Member
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: Apr 2013
Location: Las Vegas, Nevada
Posts: 1,311
Likes: 2,259
Liked 1,916 Times in 590 Posts
Default

Wow! It has a lot of "character".
Reply With Quote
The Following User Likes This Post:
  #8  
Old 06-13-2017, 12:10 PM
Old_Cop Old_Cop is offline
Member
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: Jan 2011
Location: Crawford County PA
Posts: 152
Likes: 165
Liked 167 Times in 75 Posts
Default

Character, honest wear, well loved, whatever, I'd be happy to have it. Been around guns for nearly 50 years and have rarely seen one, never held one.
__________________
Made it, Ma! Top of the world!
Reply With Quote
  #9  
Old 06-13-2017, 01:33 PM
opoefc opoefc is offline
US Veteran
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: Apr 2003
Location: Southern California, USA
Posts: 8,401
Likes: 1,418
Liked 2,620 Times in 1,362 Posts
Default

Early T-Locks in .44 Special caliber will have the ".44 S&W" stamp, as I believe the factory had not yet made a die stamp for the .44 Special marking. ( Remember, T-Locks were first produced to be .45 S&W Special caliber, for the 1906 Army trials, so until the trials did not result in S&W winning, the factory was thinking .45 for T-Locks, so why make a .44 cal die) ) Other early T-Locks w/o any barrel caliber stamps will be other than .44 S&W Special calibers, such as .45 S&W Special, and sometimes .44 WCF ( .44-40), etc. When the .44 S&W Special stamp was starting to be used is not known to me, however I have a NM#3 DA, ser. # 0, that has it's barrel stamped ".44 S&W Special" although the cylinder is chambered for .44 S&W Russian rounds. It was probably used to test the new Special die. Ed.

Last edited by opoefc; 06-13-2017 at 01:42 PM.
Reply With Quote
The Following 7 Users Like Post:
  #10  
Old 06-13-2017, 01:35 PM
SDH SDH is offline
SWCA Member
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: May 2007
Location: Montana
Posts: 1,662
Likes: 852
Liked 1,608 Times in 365 Posts
Default

My t-lock Target #902, shipped in 1908 is "Special" marked.
Reply With Quote
  #11  
Old 06-13-2017, 03:25 PM
series guy series guy is offline
Member
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: May 2010
Location: The Steel City
Posts: 529
Likes: 675
Liked 703 Times in 258 Posts
Default

That is just perfect as is. Nice score!
Reply With Quote
  #12  
Old 06-13-2017, 05:09 PM
codenamedave's Avatar
codenamedave codenamedave is offline
Member
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: Nov 2016
Location: South of Jefferson
Posts: 283
Likes: 231
Liked 574 Times in 178 Posts
Default

Quote:
Originally Posted by series guy View Post
That is just perfect as is. Nice score!
Hear, hear!

Me encanta. While I understand the investment angle, and can appreciate flawless museum pieces, I'd much rather have a worn gun that I could enjoy shooting once in a while without worrying about scratching it and ruining my retirement plans.

And just thinking about what the country was like in 1908, and what this old well-used gun has been through, makes it more interesting to me than a museum piece.
__________________
TEAM DNF
Reply With Quote
The Following 6 Users Like Post:
  #13  
Old 06-13-2017, 10:06 PM
Hondo44 Hondo44 is offline
SWCA Member
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: Oct 2007
Location: California
Posts: 10,879
Likes: 2,817
Liked 6,060 Times in 2,923 Posts
Default

Thatís a wonderful TL and one with lots of ďexperienceĒ yet unabused! Itís not only special because of the low number but also because itís entirely original, thatís rare in itself!

The early barrel rollmark is a neat feature and only seen on pretty low numbered TLs. Iíve seen several under 1500 that already have the ĎSPECIALí added. Someday weíll pin it down.

Another very early feature is a 4 screw frame like the early K frames. Does yours have the trigger guard screw? Weíll pin that one down as well but thatís also only very early TLs.

The stocks are the correct vintage and highly likely original. They are included in the seven TL serial # locations so you can verify it.
Back side of right stock penciled vertically near the back strap. Recognize the # is over 100 years old so magnification, bright sun light, and an attitude that it is there are a must!
__________________
Jim
S&WCA #819

Last edited by Hondo44; 06-13-2017 at 10:08 PM.
Reply With Quote
The Following 5 Users Like Post:
  #14  
Old 06-13-2017, 11:19 PM
Driftwood Johnson Driftwood Johnson is offline
SWCA Member
An Interesting Old Triple Lock  
Join Date: Oct 2003
Location: Massachusetts, USA
Posts: 682
Likes: 0
Liked 528 Times in 129 Posts
Default

Howdy All, thanks for the replies.

Particularly the replies about the caliber stamping.

Ed: Never heard that before about Triple Locks being submitted to the Army chambered for 45 S&W. 45 Schofield?

There is very little blue left on the gun, only in the normal protected areas; cylinder flutes, sight groove on the top strap, directly behind the recoil shield on both sides, cylinder yoke, and a few other places. Don't know as I would characterize it as 'honest holster wear', because I can see some light scratches that look like they were made from sandpaper. But for a 110 year old revolver there is no trace of pitting anywhere.

Hondo44: Yes, it has the screw in front of the trigger guard. Sorry, I looked in very good light, but I can see no trace of a number anywhere on the grips.

This revolver came from the collection of a local collector. His guns have been going for auction for a while now. It seems I share much of his taste in guns, I have several of his guns in my collection. Including the #2 Old Army Tip up in the antiques section that was modified to fire 22 Long Rifle.

I have a refinished Target Model that Roy told me shipped in November of '08 that does have the 44 S&W SPECIAL marking on the barrel. I would post a photo, but photobucket is being a real pain in the butt right now.

Last edited by Driftwood Johnson; 06-13-2017 at 11:30 PM.
Reply With Quote
  #15  
Old 06-13-2017, 11:32 PM
SVT28 SVT28 is online now
Member
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: Jul 2013
Posts: 385
Likes: 623
Liked 1,119 Times in 205 Posts
Default

Ahhhhh

If only I could find a set of those correct non medallion dished grips.... I'm jealous, an all original low serial Triple Lock with the early rollmark to boot. Nice score

SVT28
Reply With Quote
  #16  
Old 06-13-2017, 11:41 PM
Hondo44 Hondo44 is offline
SWCA Member
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: Oct 2007
Location: California
Posts: 10,879
Likes: 2,817
Liked 6,060 Times in 2,923 Posts
Default

Quote:
Originally Posted by Driftwood Johnson View Post
Ed: Never heard that before about Triple Locks being submitted to the Army chambered for 45 S&W. 45 Schofield?
THE VERY FIRST PROTOTYPE TRIPLE LOCKS WERE CHAMBERED IN THE 45 S&W SPECIAL

The .45 S&W Special began life as the .45 Frankford or "Cal. .45 Ball, Model of 1906" developed in late 1905 by Frankford Arsenal for use in testing revolvers submitted for the Army trials that began in 1906. The case was rimmed, 0.923" in length, and was loaded with a 230-grain cupro-nickel jacketed round-nose bullet over 7.2 grains of Bullseye smokeless powder. The muzzle velocity was 800 fps. S&W had high hopes for a lucrative military contract, but it wasn't to be. As is well known, the military chose the Model 1911 Colt 45 Semi Auto Pistol and its ne 45 ACP round.

In 1908 or 1909 [S&W] seriously considered introducing a model that was to be called the "45 Special." This cartridge was designed for use in what became the 44 Hand Ejector 1st Model [New Century] or Triple Lock. The cartridge was a revolver cartridge developed for military use at the Frankford Arsenal. Smith's anticipation of their 45 Spl (45 FA) chambered TLs for military and commercial success caused them to order a large quantity of boxes. So when their gun/cartridge was not adopted by the Army, it was never commercially sold. They were stuck with a huge pile of boxes labeled 45 Special inside the cover and on the end label.

As we all know, S&W never threw anything anyway. Therefore when the British came thru with a huge contract for 455 Mk II chambered Hand Ejector service revolvers for WW I, guess where the boxes went? Yep, British contract guns were packed in them and shipped across the big pond!

These boxes are usually found with a new 455 label glued over the 45 Spl end label. I can picture the British armorers unpacking the ~ 79,000+ 455 contract revolvers and once inspected, stamped, and issued to the military, a huge pile of these boxes stacked in the trash!

The boxes:
455 SN# 53541 Shipped June 9, 1916 in a 45 Special box from 1908 w/pasted over end label.

__________________
Jim
S&WCA #819
Reply With Quote
  #17  
Old 06-14-2017, 02:49 PM
alwaysoutdoors alwaysoutdoors is offline
Member
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: Feb 2010
Location: The South
Posts: 732
Likes: 168
Liked 560 Times in 257 Posts
Default

I have one with serial number 10xx and it has special on the barrel. It's 44 spl.
Reply With Quote
The Following User Likes This Post:
  #18  
Old 06-14-2017, 10:34 PM
Driftwood Johnson Driftwood Johnson is offline
SWCA Member
An Interesting Old Triple Lock  
Join Date: Oct 2003
Location: Massachusetts, USA
Posts: 682
Likes: 0
Liked 528 Times in 129 Posts
Default

Ed:

Thanks for that terrific information.
Reply With Quote
  #19  
Old 06-15-2017, 05:59 PM
M14sRock M14sRock is offline
Member
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: Nov 2010
Posts: 19
Likes: 14
Liked 6 Times in 5 Posts
Default

I love an old gun with honest wear. This one is beautiful!
Reply With Quote
The Following User Likes This Post:
  #20  
Old 06-15-2017, 08:55 PM
S.B.'s Avatar
S.B. S.B. is offline
Member
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: Feb 2003
Location: Central Illinois
Posts: 937
Likes: 25
Liked 254 Times in 140 Posts
Default

Very nice!!!!
Steve
Reply With Quote
  #21  
Old 06-16-2017, 02:57 AM
Hondo44 Hondo44 is offline
SWCA Member
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: Oct 2007
Location: California
Posts: 10,879
Likes: 2,817
Liked 6,060 Times in 2,923 Posts
Default

Quote:
Originally Posted by alwaysoutdoors View Post
I have one with serial number 10xx and it has special on the barrel. It's 44 spl.
Thx for the new data point!
__________________
Jim
S&WCA #819
Reply With Quote
  #22  
Old 06-16-2017, 06:32 AM
H P Bushrod H P Bushrod is offline
Member
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: Jul 2007
Location: Maryville, TN
Posts: 423
Likes: 397
Liked 30 Times in 23 Posts
Thumbs up

Still looking forward to the day I run across a triple lock for sale that's in the budget. I've been a fan of those revolvers from the first time I saw one back in the late '70's. Thanks for sharing the pics of that historic revolver. Enjoy!
Reply With Quote
  #23  
Old 06-16-2017, 08:37 AM
steelslaver's Avatar
steelslaver steelslaver is offline
US Veteran
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: Oct 2013
Location: Central Montana
Posts: 3,364
Likes: 1,071
Liked 5,601 Times in 1,906 Posts
Default

Keep looking and one might well come your way. I am always checking out pawn shops, gun shops and estate sales. One day I walked into a pawn shop and saw a old S&W marked as a 1917. But, it had an ejector shroud! Happy day for me, it was a decent 455 triple lock, wearing 1917 grips and missing the lanyard loop. It became mine for $725, found the correct era grips, installed a lanyard loop from a project 1917 and I have a triple lock. It had been reamed and counter sunk to 45 colt, done so it will still fire 455 rounds. Not all original, but then 45 colt is my favorite. revolver round.

Last edited by steelslaver; 06-16-2017 at 08:39 AM.
Reply With Quote
The Following 6 Users Like Post:
  #24  
Old 06-16-2017, 09:04 AM
dpast32 dpast32 is offline
Member
An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: Oct 2004
Location: Southern New England
Posts: 82
Likes: 5
Liked 35 Times in 23 Posts
Default

Excellent find !! You simply MUST get a Factory letter for it, it just may reveal some really interesting facts. Well worth the added investment, IMHO?

Best, dpast32
Reply With Quote
The Following User Likes This Post:
  #25  
Old 06-16-2017, 10:19 AM
Stirling's Avatar
Stirling Stirling is online now
Member
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: Jan 2012
Location: Cape Town, South Africa
Posts: 719
Likes: 236
Liked 356 Times in 245 Posts
Default

It is great seeing these old revolvers. The Triple Lock is such high water mark for revolvers. I am amazed that they can be found in decent condition and sometimes very good condition. They change my view on older revolvers. I wish I could get to put a cyclinder through a Triple Lock one day.
Reply With Quote
  #26  
Old 06-16-2017, 10:35 AM
SixgunStrumpet's Avatar
SixgunStrumpet SixgunStrumpet is offline
SWCA Member
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: Apr 2012
Location: Seattle Area
Posts: 1,463
Likes: 765
Liked 4,548 Times in 762 Posts
Default

Doesn't get much better to me. There's something really special about a gun that was used for what it was built for, and has survived all this time, only to come to you for a good price.

I find when I pay the right price for a gun I just like it more. And its a lot easier to pay the right price of a gun that looks like it has a little honest wear on it

Very nice buy, I'm jealous.
Reply With Quote
  #27  
Old 06-18-2017, 12:47 AM
rbrbrb6's Avatar
rbrbrb6 rbrbrb6 is offline
Member
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: Nov 2012
Posts: 324
Likes: 120
Liked 904 Times in 168 Posts
Default

I have that guns twin brother that was "made an hour before" yours with S#146 and it has the exact same barrel markings. I spent the dollars to get the letter just for grins and giggles.


Reply With Quote
The Following 4 Users Like Post:
  #28  
Old 06-19-2017, 09:02 PM
iskra iskra is offline
Member
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: Oct 2011
Location: Oceanside, California
Posts: 263
Likes: 3
Liked 224 Times in 110 Posts
Default

Just to add my 'Triple Target', SN 10xx, shown below (& previously displayed/discussed on this Forum). Immediate relevance: Grips, trigger guard hole and "Special"; all in evidence. Interestingly or perhaps of concern, my TL Hand Ejector SN 137xx also shows the 'guard hole'!!! Faintly discernible in my file photos, unknown if visible in Forum pix rendition. Perhaps those trigger guard screws throughout production??? ...Or only on "Executive" models, destined for such as the Kaiser and Elvis!
TLs a certain 'quality aura' all their own!
My take
Attached Thumbnails
An Interesting Old Triple Lock-74-1u-jpg   An Interesting Old Triple Lock-73-6-jpg  
Reply With Quote
The Following 2 Users Like Post:
  #29  
Old 06-19-2017, 09:31 PM
Hondo44 Hondo44 is offline
SWCA Member
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: Oct 2007
Location: California
Posts: 10,879
Likes: 2,817
Liked 6,060 Times in 2,923 Posts
Default

Only the earliest couple hundred TLs are 4 screws, the rest have five screws including the trigger guard screw.
__________________
Jim
S&WCA #819
Reply With Quote
  #30  
Old 06-19-2017, 09:48 PM
hsguy hsguy is offline
SWCA Member
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: May 2002
Location: Suburban Chicago
Posts: 3,398
Likes: 106
Liked 1,447 Times in 399 Posts
Default

My Triple Lock 373 has the same markings, thanks for the thread, never notice it before.

__________________
John. SWCA #1586
Reply With Quote
The Following 3 Users Like Post:
  #31  
Old 06-19-2017, 10:05 PM
Hondo44 Hondo44 is offline
SWCA Member
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: Oct 2007
Location: California
Posts: 10,879
Likes: 2,817
Liked 6,060 Times in 2,923 Posts
Default

Quote:
Originally Posted by hsguy View Post
My Triple Lock 373 has the same markings, thanks for the thread, never notice it before.

Beautiful!

Does it have a trigger guard screw?
__________________
Jim
S&WCA #819
Reply With Quote
  #32  
Old 06-20-2017, 01:25 PM
hsguy hsguy is offline
SWCA Member
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: May 2002
Location: Suburban Chicago
Posts: 3,398
Likes: 106
Liked 1,447 Times in 399 Posts
Default

Jim, it does have the trigger guard screw.
__________________
John. SWCA #1586
Reply With Quote
  #33  
Old 06-20-2017, 07:25 PM
Hondo44 Hondo44 is offline
SWCA Member
An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock An Interesting Old Triple Lock  
Join Date: Oct 2007
Location: California
Posts: 10,879
Likes: 2,817
Liked 6,060 Times in 2,923 Posts
Default

Quote:
Originally Posted by hsguy View Post
Jim, it does have the trigger guard screw.
Thank you.
__________________
Jim
S&WCA #819
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Increasingly more Interesting Triple Lock *update* SixgunStrumpet S&W Hand Ejectors: 1896 to 1961 66 12-10-2014 06:36 PM
Triple Digit Triple Lock (Bandwidth Warning!) DCWilson S&W Hand Ejectors: 1896 to 1961 38 10-10-2012 10:29 AM
Interesting Triple Lock... bettis1 S&W Hand Ejectors: 1896 to 1961 16 07-03-2012 07:50 PM
Picked up an interesting shooter-grade Triple Lock today PICS ADDED Teddydog S&W Hand Ejectors: 1896 to 1961 16 07-12-2011 04:49 PM
An Interesting 1915 Nickel Triple Lock tipoc S&W Hand Ejectors: 1896 to 1961 10 11-06-2009 12:42 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 03:00 AM.


© S-W Forum, LLC 2000-2015
Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)