Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Revolvers > S&W Hand Ejectors: 1896 to 1961
o

Notices

S&W Hand Ejectors: 1896 to 1961 All 5-Screw & Vintage 4-Screw SWING-OUT Cylinder REVOLVERS, and the 35 Autos and 32 Autos


Reply
 
Thread Tools Display Modes
  #1  
Old 06-18-2017, 04:28 PM
Sig_Lover Sig_Lover is offline
Member
S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying  
Join Date: Nov 2015
Posts: 18
Likes: 18
Liked 30 Times in 7 Posts
Default S&W Victory Help identifying

Several years ago I purchaced many victory model pistols. One cought my eye. it origionaly had NO finish. has several coats of paint. mostly black but there is some red under on the barrel. markings on the gun itself are lost to the paint. SN on But is V 114. the frame markings with cylinder open apear to be V 114 ? butt are blocked by the paint.
Can any one give me some information of this gun. history, mfg date, value, etc.
Any and All information will be appreciated.
Pictues included.
Attached Images
File Type: jpg V144a.jpg (106.4 KB, 72 views)
File Type: jpg V144b.jpg (120.0 KB, 61 views)
File Type: jpg V144c.jpg (48.0 KB, 72 views)
File Type: jpg V144d.jpg (58.2 KB, 63 views)
File Type: jpg V144e.jpg (74.2 KB, 57 views)
Reply With Quote
  #2  
Old 06-18-2017, 04:35 PM
gunnails's Avatar
gunnails gunnails is offline
Member
S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying  
Join Date: Nov 2013
Location: Portland OR
Posts: 969
Likes: 1,658
Liked 1,203 Times in 427 Posts
Default

What caliber and barrell length?
Reply With Quote
  #3  
Old 06-18-2017, 04:42 PM
DWalt's Avatar
DWalt DWalt is offline
Member
S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying  
Join Date: Dec 2009
Location: South Texas & San Antonio
Posts: 33,480
Likes: 236
Liked 28,942 Times in 14,013 Posts
Default

That gun shipped August 11, 1942 - it has been mentioned previously in this forum. It is a British Service Revolver (BSR) Victory, .38 S&W caliber. The black paint could be Suncorite, a paint sometimes used by the British for gun finishing and refinishing. In that condition its value would not be high, maybe $300-$400.

Last edited by DWalt; 06-18-2017 at 04:44 PM.
Reply With Quote
  #4  
Old 06-18-2017, 04:44 PM
murphydog's Avatar
murphydog murphydog is offline
Moderator
S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying  
Join Date: Jun 2007
Posts: 26,782
Likes: 936
Liked 18,876 Times in 9,241 Posts
Default

If the right barrel (can't see the stampings clearly, and due to the paint maybe you can't either ) is marked ".38 S & W CTG" and stamped with the same serial number on the barrel flat near the ejector rod, it is a very early British/Commonwealth Victory Model from 1942. The U.S. version of this model used the .38 Special; if one of these chambers fully it was modified to do so, a common post-war alteration.

It originally had a Parkerized or similar finish, and the British often refinished them with black paint. There was a recent thread here about "Suncorite", which may be the material used. It would obviously be worth more with original finish but is interesting due to the SN.

It is interesting to have such a low SN, as the U.S. was turning out VMs for our forces as quickly as possible and I would think guns for export would have taken a back seat. There is a running thread here for Victory Model database information and posting there will get you connected to some real experts. Hope this is helpful.
__________________
Alan
SWCA LM 2023, SWHF 220
Reply With Quote
  #5  
Old 06-18-2017, 04:45 PM
Absalom's Avatar
Absalom Absalom is offline
SWCA Member
Absent Comrade
S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying  
Join Date: Jan 2014
Location: Oregon
Posts: 12,834
Likes: 10,103
Liked 27,995 Times in 8,452 Posts
Default

It's obviously a British Service Model. The black paint as well as white painted numbers as inventory or unit markings of some sort are relatively common on Enfield revolvers from the same era, but not seen that often applied to BSR's.

Attached an example from my picture collection (unknown web source).
Attached Images
File Type: jpg IMG_4858.JPG (241.6 KB, 35 views)
Reply With Quote
The Following User Likes This Post:
  #6  
Old 06-18-2017, 04:47 PM
DWalt's Avatar
DWalt DWalt is offline
Member
S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying  
Join Date: Dec 2009
Location: South Texas & San Antonio
Posts: 33,480
Likes: 236
Liked 28,942 Times in 14,013 Posts
Default

A very high percentage of the early Victories (but just how high I do not know) were BSRs in .38 S&W.
Reply With Quote
  #7  
Old 06-19-2017, 12:16 AM
JP@AK's Avatar
JP@AK JP@AK is offline
US Veteran
S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying  
Join Date: Mar 2011
Location: Palmer, Alaska
Posts: 14,478
Likes: 5,112
Liked 18,983 Times in 6,863 Posts
Default

Quote:
Originally Posted by murphydog View Post
It is interesting to have such a low SN, as the U.S. was turning out VMs for our forces as quickly as possible and I would think guns for export would have taken a back seat.
Boy, Alan, I don't know. Remember that S&W owed the Brits a ton of money for the up-front payment they got for a light infantry rifle they never produced. They negotiated a deal whereby they would pay off the debt by delivering revolvers. I don't know if this was squared up by April, 1942, or not, but I doubt they were reluctant to keep delivering the BSR to the UK.

Of course, by mid-March they were also producing .38 Special revolvers under the Navy contract (signed on March 2), so production had to be humming along pretty quickly.
__________________
Jack
SWCA #2475, SWHF #318
Reply With Quote
The Following User Likes This Post:
  #8  
Old 06-19-2017, 01:20 AM
Absalom's Avatar
Absalom Absalom is offline
SWCA Member
Absent Comrade
S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying  
Join Date: Jan 2014
Location: Oregon
Posts: 12,834
Likes: 10,103
Liked 27,995 Times in 8,452 Posts
Default

Quote:
Originally Posted by JP@AK View Post
...... I don't know if this was squared up by April, 1942, or not, but I doubt they were reluctant to keep delivering the BSR to the UK.
......
Keep in mind that by that date all BSR's were produced for Lend-lease, which for practical purposes meant that as far as the factory was concerned, any revolver they were producing (except for DSC guns) was for the US Government, in either version. Uncle Sam paid the tab. And S&W delivered the BSR's not to the UK, but to Army Ordnance at Hartford; very nitpicky, I know , but I'm just mentioning it to illustrate my point that the decision what was produced likely did not depend in any way on the factory's preferences or priorities.

They delivered what they could produce, based on what the government contracts called for. And that was that .

Last edited by Absalom; 06-19-2017 at 01:30 AM.
Reply With Quote
  #9  
Old 06-19-2017, 12:57 PM
JP@AK's Avatar
JP@AK JP@AK is offline
US Veteran
S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying  
Join Date: Mar 2011
Location: Palmer, Alaska
Posts: 14,478
Likes: 5,112
Liked 18,983 Times in 6,863 Posts
Default

Sure. If lend/lease guns were coming out in the fall of '41, that would mean the S&W debt to England must have been paid off by sometime that summer. Since the L/L Act passed in early 1941, the delay in L/L BSRs would be due to finishing up the guns purchased by the UK. Makes sense to me.
__________________
Jack
SWCA #2475, SWHF #318
Reply With Quote
  #10  
Old 06-19-2017, 07:12 PM
DWalt's Avatar
DWalt DWalt is offline
Member
S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying  
Join Date: Dec 2009
Location: South Texas & San Antonio
Posts: 33,480
Likes: 236
Liked 28,942 Times in 14,013 Posts
Default

For sure, some late 1941 pre-Victory BSRs in the mid-8xxxxx SN range had the "UNITED STATES PROPERTY" topstrap stamping. And I would assume that would make them Lend-Lease revolvers. It may even be possible that some unstamped revolvers may have gone out under the L-L program.

I think the S&W debt to the British under the ill-fated light rifle program was about $1 Million, which was refunded in revolvers. I have no idea as to what the agreed-upon price for a single revolver was for that transaction, but probably not far from $25. So it would have taken maybe 40,000 revolvers to satisfy the debt. That number could have easily been produced during the first few months of 1941, before the L-L Act passed. Maybe someone else knows more about that.
Reply With Quote
  #11  
Old 06-19-2017, 08:46 PM
Absalom's Avatar
Absalom Absalom is offline
SWCA Member
Absent Comrade
S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying  
Join Date: Jan 2014
Location: Oregon
Posts: 12,834
Likes: 10,103
Liked 27,995 Times in 8,452 Posts
Default

Quote:
Originally Posted by DWalt View Post
....... I have no idea as to what the agreed-upon price for a single revolver was for that transaction, but probably not far from $25. So it would have taken maybe 40,000 revolvers to satisfy the debt. That number could have easily been produced during the first few months of 1941, before the L-L Act passed. Maybe someone else knows more about that.
Your estimate is about right. There are no prices on any BSR letters I've seen, but according to my letter for 910507, a .38 Spl. 4-incher, from Jan 27, 1942, the DSC was billed $23.79 per gun. Price calculations for the BSR likely were comparable.
Reply With Quote
  #12  
Old 06-23-2017, 04:09 PM
Sig_Lover Sig_Lover is offline
Member
S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying S&W Victory Help identifying  
Join Date: Nov 2015
Posts: 18
Likes: 18
Liked 30 Times in 7 Posts
Default

Thanks. paid 39.00 for it so I came out all right.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help identifying a Pre-Victory Model Bast70 S&W Hand Ejectors: 1896 to 1961 6 01-08-2017 07:12 PM
Assistance identifying Victory .38 Special dawgbone62 S&W Hand Ejectors: 1896 to 1961 4 06-15-2015 11:08 PM
Need help identifying a victory 38 markboc68 S&W Hand Ejectors: 1896 to 1961 9 04-23-2014 12:40 PM
Help identifying a S&W pistol - Pre Victory? mamitchell19 S&W Hand Ejectors: 1896 to 1961 3 06-27-2012 02:55 PM
Help Identifying new Victory freightdog S&W Hand Ejectors: 1896 to 1961 6 06-07-2008 06:47 AM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 04:57 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)