|
|
|
08-29-2018, 06:36 PM
|
Member
|
|
|
Join Date: Apr 2012
Location: Idaho
Posts: 52
Likes: 0
Liked 55 Times in 22 Posts
|
|
Jim, my triple lock #15055 does not have any British proofs. It has numbers 6419 on the crane and frame. Thanks, JMtoolman.
|
The Following User Likes This Post:
|
|
08-29-2018, 06:51 PM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,248
Likes: 11,903
Liked 20,594 Times in 8,582 Posts
|
|
Thx JM!
Ah hah, I didn't think it would. I believe you have a very special 455 TL.
Because that serial # is not in any of the Brit contract WWI service revolver serial # ranges and since it doesn't have any Brit acceptance, proof, or import/export stamps.
I believe it must be a "44 Special Hand Ejector - 1st Model" for these reasons:
1. likely it was special ordered new from S&W with a 455 Mk II chambering,
2. no brit stamps,
3. marked 455 on barrel (the Brit TLs were not marked),
4. and numbered in the 44 serial # range. That would make it one of around 100 and very scarce.
I would definitely get an Historical Letter for that one to confirm!
The only other possibility is that it's a #3B version in my post #178 but as you'll see it's serial # is over 2000 #s higher than any known in that range. And it was sold on the com'l market, not shipped to England.
__________________
Jim
S&WCA #819
Last edited by Hondo44; 08-29-2018 at 06:57 PM.
|
08-29-2018, 09:10 PM
|
Member
|
|
|
Join Date: Jan 2003
Location: Taylor Mi USA
Posts: 142
Likes: 14
Liked 17 Times in 12 Posts
|
|
I have a 2nd Model marked 455 on left side of the barrel> The S/N is 8343 as marked on the butt grip and on the frame next to the crane. The crane is also marked with this number in 2 places. The barrel and cylinder are marked 54795, so I'm not sure which is the correct S/N! There is a defaced proof on the knuckle above the grip, and the backstrap is marked RCMP 97
|
08-29-2018, 10:54 PM
|
|
SWCA Member
|
|
|
Join Date: Sep 2006
Location: Henderson,Nevada
Posts: 2,624
Likes: 1,874
Liked 9,106 Times in 1,288 Posts
|
|
According to "Arms & accoutrements of the Mounted Police, 1873-1973: The first one hundred years" the RCMP did not buy S&W revolvers in 455 caliber, they bought Colt New Services until WW2.
I would question the RCMP markings on the above mentioned gun.
__________________
SWCA 1932 SWHF 135
|
The Following User Likes This Post:
|
|
08-29-2018, 11:48 PM
|
|
SWCA Member Absent Comrade
|
|
|
Join Date: May 2006
Location: South Florida, USA
Posts: 3,577
Likes: 7,970
Liked 4,671 Times in 1,606 Posts
|
|
Quote:
Originally Posted by Toyman
According to "Arms & accoutrements of the Mounted Police, 1873-1973: The first one hundred years" the RCMP did not buy S&W revolvers in 455 caliber, they bought Colt New Services until WW2.
I would question the RCMP markings on the above mentioned gun.
|
There were many with British and / or Canadian proofs in .455. Were those only for the military. I have a New Service in .455 I guess I should mortgage my house to get a letter from Colt on it.
__________________
ANTIQUESMITHS
LM1300 SWHF425
|
08-30-2018, 12:15 AM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,248
Likes: 11,903
Liked 20,594 Times in 8,582 Posts
|
|
Quote:
Originally Posted by wiley
I have a 2nd Model marked 455 on left side of the barrel> The S/N is 8343 as marked on the butt grip and on the frame next to the crane. The crane is also marked with this number in 2 places. The barrel and cylinder are marked 54795, so I'm not sure which is the correct S/N! There is a defaced proof on the knuckle above the grip, and the backstrap is marked RCMP 97
|
Thank you. The # on the butt is strange to be matching the assembly #s in the yoke. Could we get a photo of that?
Likely if the butt # was removed and later restamped, the wrong # was used which is not uncommon. The serial # is 54795.
It can be confirmed in 3 other locations:
3. Yoke - on rear face only visible thru a chamber with a flashlight
4. Extractor star - backside
6. Right stock only - on back; penciled om this vintage and stock material.
__________________
Jim
S&WCA #819
|
The Following User Likes This Post:
|
|
08-30-2018, 12:20 AM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,248
Likes: 11,903
Liked 20,594 Times in 8,582 Posts
|
|
In 1873 the North West Mounted Police (NWMP) was created. The .450 Adams revolver was the original sidearm, ex- British Army guns, shipped over “packed in a valise” (a reference to why so many were found damaged upon arrival from England and not useable. Period photos show Adams in a cross-draw leather belt holster. I'm not aware that the Colt SAA was ever used by the NWMP.)
1904 'Royal' was bestowed upon the NWMP and they became the RNWMP. The Colt New Service was 1st ordered, and they were chambered in .455 Eley & re-ordered 3 more times thru 1914.
1918 they switched to the .45 Colt chambered NS. This is the period that 724 S&W “455 Mk II Hand Ejector - 2nd Models” chambered in 45 Colt were ordered by the RNWMP. No serial # list known, Pg 203 H of S&W. But a # range has been reported*.
1920 RNWMP merged w/the Dominion Police Force to become a Canadian wide force, the Royal Canadian Mounted Police (RCMP).
1920 thru 1942 45 Colt NS revolvers were re-ordered exclusively except for 1932 when the last batch of 455 Eleys (MK II) was ordered. To solve the issue of two different cartridges, all 45 Colt chambered guns were moved to eastern Canada and all 455 Eleys to west of Thunder Bay in Northwest Ontario.
1954 all .45 caliber revolvers were retired and the S&W .38 Spl Military and Police (Pre mod 10) was adopted (thought to be 5 ½” barrels).
1964 retired .45 caliber revolvers were first offered to Force members for $12 ea. Then the remainder were sold to the general public.
Revolvers were usually stamped with variations of the RCMP letters. Of the 3,195 Colt NS revolvers, only 2800 were actually stamped with an issue number. Mostly MP marked Colt New Service revolvers have been observed.
*Most of the 724 are in the 70K range, though there are some earlier... in the 40K range... that didn't go to Canada. #74301 is one that did, a Canadian-shipped .455 HE 2nd Mod. in .45 Colt.
Post #13 has an interesting story of one here:
RCMP .455 SECOND MODEL
Forum member Jim Fisher has one in the 40K range that was found a few years back; there are 14 others mfg. (if my recall is correct) at the same time.
_______________
__________________
Jim
S&WCA #819
Last edited by Hondo44; 08-30-2018 at 01:47 AM.
|
The Following User Likes This Post:
|
|
08-30-2018, 01:11 AM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,248
Likes: 11,903
Liked 20,594 Times in 8,582 Posts
|
|
Quote:
Originally Posted by Toyman
According to "Arms & accoutrements of the Mounted Police, 1873-1973: The first one hundred years" the RCMP did not buy S&W revolvers in 455 caliber, they bought Colt New Services until WW2.
I would question the RCMP markings on the above mentioned gun.
|
I do too! In particular because the known marking is just MP with an issue #.
The RCMP did not buy 455s. But The Canadian military bought 14,500 .455 2nd Models [H of S&W, pg. 203].
Canadian military shipments of 14,500:
-1500 Shipped after Aug. 1915
-850 Shipped thru December 24th, 1915
-150 Shipped thru March 31st, 1916
-6,000 Shipped thru July 22nd, 1916
-6000 Shipped February 10, 1917
At least 1 shipped July 29th, 1916, see post #10: .455 Hand Ejector 45 Colt
__________________
Jim
S&WCA #819
|
The Following User Likes This Post:
|
|
08-30-2018, 07:51 PM
|
Member
|
|
|
Join Date: Jan 2003
Location: Taylor Mi USA
Posts: 142
Likes: 14
Liked 17 Times in 12 Posts
|
|
Quote:
Originally Posted by Hondo44
Thank you. The # on the butt is strange to be matching the assembly #s in the yoke. Could we get a photo of that?
Likely if the butt # was removed and later restamped, the wrong # was used which is not uncommon. The serial # is 54795.
It can be confirmed in 3 other locations:
3. Yoke - on rear face only visible thru a chamber with a flashlight
4. Extractor star - backside
6. Right stock only - on back; penciled om this vintage and stock material.
|
Not best pics, and I couldn't figure a way to shoot rear face of crane, which has the same #8345. Same with rear face of extractor, it is #54795.
I believe the #8345 number on the frame is the s/n because of location. Regards,
Wiley
|
The Following User Likes This Post:
|
|
08-30-2018, 08:32 PM
|
Member
|
|
|
Join Date: Jan 2003
Location: Taylor Mi USA
Posts: 142
Likes: 14
Liked 17 Times in 12 Posts
|
|
Quote:
Originally Posted by Hondo44
Thank you. The # on the butt is strange to be matching the assembly #s in the yoke. Could we get a photo of that?
Likely if the butt # was removed and later restamped, the wrong # was used which is not uncommon. The serial # is 54795.
It can be confirmed in 3 other locations:
3. Yoke - on rear face only visible thru a chamber with a flashlight
4. Extractor star - backside
6. Right stock only - on back; penciled om this vintage and stock material.
|
Not best pics, and I couldn't figure a way to shoot rear face of crane, which has the same #8345. Same with rear face of extractor, it is #54795.
I believe the #8345 number on the frame is the s/n because of location. Regards,
Wiley
|
08-30-2018, 08:54 PM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,248
Likes: 11,903
Liked 20,594 Times in 8,582 Posts
|
|
Quote:
Originally Posted by wiley
Not best pics, and I couldn't figure a way to shoot rear face of crane, which has the same #8345. Same with rear face of extractor, it is #54795.
I believe the #8345 number on the frame is the s/n because of location. Regards,
Wiley
|
Well that was easy. The butt photo says it all, no more mystery.
The first mistake was using the assembly # to restamp the butt and a little crooked from a factory stamping.
The 2nd and worst mistake was; the # is stamped upside down and on the wrong side of the lanyard swivel! A lead pipe cinch it's been restamped!
3rd mistake was also stamping the 8345 on the yoke face.
Until 1942 serial #s on the butt read right side up with muzzle to the right.
After that they read correctly with muzzle to the left like yours.
The face of the yoke is restamped as well. The gun may also or may not have a replaced barrel, cyl/extractor star, and yoke, not original to the gun.
If original to the frame, the side plate will have the 8345 assembly # on the inside.
Can you find a penciled # on the inside of right grip with good light and magnification? That may have the frame's original serial #. At least it'll tell you if barrel and cyl are original.
__________________
Jim
S&WCA #819
Last edited by Hondo44; 08-30-2018 at 09:21 PM.
|
The Following User Likes This Post:
|
|
08-30-2018, 11:17 PM
|
Member
|
|
|
Join Date: Jan 2003
Location: Taylor Mi USA
Posts: 142
Likes: 14
Liked 17 Times in 12 Posts
|
|
The #8345 does appear in the recess for the hand. LH grip doesn't show much, it's split on the back side and has had sanding done for what ever purpose. Same with the right grip, although there is an 03 stamped in it next to the screw hole. I tend to suppose that it is a Canadian gun, even though the mark is mostly obliterated, and that it was rebuilt with a new barrel, extractor and cylinder.
|
The Following User Likes This Post:
|
|
09-12-2018, 06:18 PM
|
SWCA Member
|
|
|
Join Date: Aug 2009
Location: Virginia
Posts: 1,179
Likes: 1,050
Liked 2,543 Times in 462 Posts
|
|
Here is a .44spl TL, but with a .455 connection. The letter mentions a group of .455s from 1910, which I presume would be commercial, but your database shows nothing in that s/n range. I have asked SWHF for any info on the group and will pass on any results.
Bob
Last edited by red9; 09-12-2018 at 06:20 PM.
|
The Following 3 Users Like Post:
|
|
09-13-2018, 07:10 AM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,248
Likes: 11,903
Liked 20,594 Times in 8,582 Posts
|
|
Thank you Bob,
That's a very special 44 TL Military Target -1st Model, factory chambered for the 455 Mk II/Webley cartridge as confirmed in the letter.
The unusual target sight arrangement is well known albeit not common on the TL. They're often referred to as Bisley, (England) Match revolvers. The target sights are specifically to meet a Bisley Match rule, which disallowed fully adjustable rear target sights, and I'm a bit disappointed that this was not mentioned in this particular letter.
What is the date on the letter, as it reads like an older letter?
Because of it's semi-target configuration, very early shipping date, and shipping destination, it clearly has no relationship to the British military contract revolver orders which came about 4 years later.
The "military" part of the military target description refers only to S&Ws official name for this model with fixed sights: "44 Military Model of 1908".
You're correct, I have no other examples from this group of revolvers that shipped together, but I do have a category "0", to which yours has been added, for all other 44 TL revolvers factory chambered in 455, prior to or during British military orders, but not known to be within the BSR 44 or 455 military serial # ranges that shipped under the contract.
I suspect this group of military target models were ordered by Robinson for US target shooters to compete at Bisley, or possibly by a British team. Although if for English shooters, any that made it across the 'big pond' would likely show Civilian acceptance/proof marks. Yours apparently never left the USA shores, however, except perhaps in a US competitor's shooting bag.
That's not to say that none of these were scooped up by the British Purchasing Commission (as they did myriad US firearms) to eventually end up in the WW I conflict whether on the battlefield or with the English home guard.
__________________
Jim
S&WCA #819
Last edited by Hondo44; 09-13-2018 at 07:13 AM.
|
The Following User Likes This Post:
|
|
09-13-2018, 08:54 AM
|
SWCA Member
|
|
|
Join Date: Aug 2009
Location: Virginia
Posts: 1,179
Likes: 1,050
Liked 2,543 Times in 462 Posts
|
|
Jim,
This gun is in caliber .44Spl (not marked on the barrel, but verified). I posted in this thread because of the .455 association in the letter. No British proofs on the frame; the cylinder is a replacement. Possibly an American competitor at Bisley? The letter is from 2000. I hope SWHF has more information available than Roy did at that time.
Bob
|
The Following User Likes This Post:
|
|
09-13-2018, 11:49 PM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,248
Likes: 11,903
Liked 20,594 Times in 8,582 Posts
|
|
Hi Bob,
Hmmm, well if not serial numbered on the barrel obviously it's not original along with the cylinder, so I agree they've been replaced, but not by the factory. The revolver most likely was in 455. Yes, possibly an American Bisley competitor that knew the 44 Spl inherent accuracy advantage over the 455.
As stated in the letter, the caliber was not indicated on the shipping record/invoice, so the original caliber will not likely come from Roy. But when the 2000 letter you have was written, I didn't get the impression Roy was told that the barrel and cyl were 44 with no or none matching numbers. So a new letter might be interesting given that knowledge and the 18 years of additional knowledge Roy has obtained.
I too hope the SWHF may have more info, but I'm not encouraged because the archives aren't digitized for all years. And they'd only have info on work the factory did, and we know the barrel and cyl are 44 with no or none matching numbers which confirms it was not done at the factory. But worth a try because if nothing is found, it won't cost you anything.
Robinson's old records if they still exist may be the best source of your revolver's original configuration or changes if Robinson was tasked with getting that work done for a customer, at a local gunsmith they used.
By the way, that .44 7 1/2" barrel is a scarce one!
__________________
Jim
S&WCA #819
Last edited by Hondo44; 09-13-2018 at 11:51 PM.
|
The Following User Likes This Post:
|
|
09-14-2018, 08:15 AM
|
SWCA Member
|
|
|
Join Date: Aug 2009
Location: Virginia
Posts: 1,179
Likes: 1,050
Liked 2,543 Times in 462 Posts
|
|
Jim,
The barrel is not caliber marked, which is unusual (unheard of?) for a .44spl. But it is serial numbered to the butt, and fired .44spl bullets show no slippage as they would if fired from an oversized barrel. I hope SWHF has further info on this and the .455s from the same group.
Bob
|
The Following User Likes This Post:
|
|
09-14-2018, 12:42 PM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,248
Likes: 11,903
Liked 20,594 Times in 8,582 Posts
|
|
Sorry, I mis-understood about the barrel being serial numbered. That's good, so just the cyl doesn't match.
And yes, very unusual for a 44 barrel not to be caliber marked.
__________________
Jim
S&WCA #819
|
The Following User Likes This Post:
|
|
09-14-2018, 01:18 PM
|
SWCA Member
|
|
|
Join Date: Aug 2009
Location: Virginia
Posts: 1,179
Likes: 1,050
Liked 2,543 Times in 462 Posts
|
|
Jim,
Just found something else, unfortunately with no serial numbers. This came from the notes of the person I bought mine from. It is from Larry/dbwesson to Joe Miller on the old forum. Someone who has a copy of his survivors database may be able to provide s/n.
|
The Following User Likes This Post:
|
|
09-14-2018, 03:05 PM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,248
Likes: 11,903
Liked 20,594 Times in 8,582 Posts
|
|
Very interesting.
Since your gun was shipped almost 2 years later, it could very well have been an extra one of those earlier frames (also called an 'over-run' frame) with the 'military target' sight, i.e., Bisley Match sight, but assembled as a 44.
Roy's letter does indicate the sights are factory in his letter above. And even states it was manufactured in a group of 455 guns, but he didn't say it shipped with them. I think his assumption that yours was a 455 was based on that, but an incorrect assumption since yours is an original 44, or factory converted to 44 2 years later when an order came in for a Bisley sighted 44 Spl.
How about some close up photos of the rear sight; top and side view?
__________________
Jim
S&WCA #819
Last edited by Hondo44; 09-15-2018 at 09:09 AM.
Reason: Added info
|
The Following User Likes This Post:
|
|
09-14-2018, 04:43 PM
|
|
Member
|
|
|
Join Date: Nov 2007
Location: Anniston AL
Posts: 146
Likes: 35
Liked 91 Times in 21 Posts
|
|
I have a mark I Triple Lock 455 Roll marked on left side of barrel Smith & Wesson 455 serial # 12902. No British proof marks.
I also have a Mark II HE with British proof marks roll marked on left side of Barrel Smith & Wesson 455. Serial #43429 it has been converted to 45 ACP.
|
09-14-2018, 06:13 PM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,248
Likes: 11,903
Liked 20,594 Times in 8,582 Posts
|
|
Thank you.
Your TL sold commercially to Shapleigh Hardware on December 29, 1917
__________________
Jim
S&WCA #819
|
The Following User Likes This Post:
|
|
11-12-2018, 02:53 AM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,248
Likes: 11,903
Liked 20,594 Times in 8,582 Posts
|
|
See post #1 for the latest databank update.
__________________
Jim
S&WCA #819
Last edited by Hondo44; 06-19-2023 at 08:20 PM.
|
The Following 6 Users Like Post:
|
|
11-12-2018, 12:54 PM
|
|
SWCA Member
|
|
|
Join Date: Sep 2006
Location: Henderson,Nevada
Posts: 2,624
Likes: 1,874
Liked 9,106 Times in 1,288 Posts
|
|
__________________
SWCA 1932 SWHF 135
Last edited by Toyman; 11-12-2018 at 12:55 PM.
|
The Following 4 Users Like Post:
|
|
11-12-2018, 03:10 PM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,248
Likes: 11,903
Liked 20,594 Times in 8,582 Posts
|
|
Dang Terry,
That's one fine gun and one fine 'package'!
Congrats!
__________________
Jim
S&WCA #819
|
The Following User Likes This Post:
|
|
11-13-2018, 12:07 PM
|
Member
|
|
|
Join Date: Apr 2012
Location: Idaho
Posts: 52
Likes: 0
Liked 55 Times in 22 Posts
|
|
Jim, I received my reply for #15055 triple lock, .455 cal. It is one of the 160 units shipped to Shapleigh Hardware on Dec. 29th, 1917. This date is neat to me for that is only four months after my father was born! He passed away at 93 years old a few years back. It was one of the 160 contract revolvers built for the English Government, but not delivered. They were sold out of inventory to meet the demand for large caliber revolvers at the beginning of WW1. If you wish some photos of the revolver, with the help of my wife I can probably send some off to you. Best regards, JM
Last edited by JMtoolman; 11-13-2018 at 12:10 PM.
|
11-14-2018, 07:43 AM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,248
Likes: 11,903
Liked 20,594 Times in 8,582 Posts
|
|
Quote:
Originally Posted by JMtoolman
Jim, I received my reply for #15055 triple lock, .455 cal. It is one of the 160 units shipped to Shapleigh Hardware on Dec. 29th, 1917. This date is neat to me for that is only four months after my father was born! He passed away at 93 years old a few years back. It was one of the 160 contract revolvers built for the English Government, but not delivered. They were sold out of inventory to meet the demand for large caliber revolvers at the beginning of WW1. If you wish some photos of the revolver, with the help of my wife I can probably send some off to you. Best regards, JM
|
Awesome! Thx very much and congrats! Not many of those confirmed. I added it to the updated study info post above.
__________________
Jim
S&WCA #819
|
01-21-2019, 02:22 PM
|
|
SWCA Member
|
|
|
Join Date: May 2018
Location: Outer Uzbekistan
Posts: 4,667
Likes: 8,581
Liked 11,686 Times in 3,060 Posts
|
|
Second Model, S/N 36804 roll stamped 'Smith & Wesson .455' on LHS of barrel.
Crossed pennants on yoke, stamp on butt. No other markings.
Last edited by delcrossv; 01-21-2019 at 02:23 PM.
|
01-21-2019, 05:02 PM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,248
Likes: 11,903
Liked 20,594 Times in 8,582 Posts
|
|
Quote:
Originally Posted by delcrossv
Second Model, S/N 36804 roll stamped 'Smith & Wesson .455' on LHS of barrel.
Crossed pennants on yoke, stamp on butt. No other markings.
|
Thx, that one shipped in a group Jan 6, 1916.
__________________
Jim
S&WCA #819
|
01-22-2019, 10:22 AM
|
Member
|
|
|
Join Date: Nov 2011
Location: IL
Posts: 1,706
Likes: 693
Liked 2,845 Times in 579 Posts
|
|
I recently picked up serial number 489 and the barrel lacks a caliber roll mark.
If am missing any info let me know!
|
The Following User Likes This Post:
|
|
01-22-2019, 03:06 PM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,248
Likes: 11,903
Liked 20,594 Times in 8,582 Posts
|
|
Quote:
Originally Posted by younggun22
I recently picked up serial number 489 and the barrel lacks a caliber roll mark.
If am missing any info let me know!
|
Thank you, it's the 3rd lowest s/n in my database.
It's a version 2 Triple Lock:
2. “.455 Mark II HE - 1st Model TL” in the new .455 British serial # range 1 to ~5800 [H of S&W pg. 201] assembled 1914-15. Thus creating 63 duplicate serial #s with the 666 1st version in #1. above in the “.44 HE 1st Model TL” .455 conversion serial number range.
__________________
Jim
S&WCA #819
|
The Following User Likes This Post:
|
|
10-30-2019, 04:44 PM
|
Member
|
|
|
Join Date: Jul 2012
Location: Landenberg, Pa.
Posts: 19
Likes: 7
Liked 6 Times in 4 Posts
|
|
I have a .455 Hand Ejector MK.II #16872 that was shipped to Remington Arms on Sept. 23, 1915. It has no caliber roll marking but does exhibit the usual Enfield inspector's mark on the rear L/S frame plus the crossed pennant mark on the barrel re-enforce, same side.
The gun was given to me by a late friend in England who sent it over here to avoid surrendering it to his government in 1998.
|
The Following 3 Users Like Post:
|
|
10-30-2019, 09:02 PM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,248
Likes: 11,903
Liked 20,594 Times in 8,582 Posts
|
|
See post #1 for the latest databank update.
__________________
Jim
S&WCA #819
Last edited by Hondo44; 06-19-2023 at 08:22 PM.
|
The Following 8 Users Like Post:
|
|
10-31-2019, 09:02 AM
|
US Veteran
|
|
|
Join Date: Feb 2009
Location: Ozarks of Missouri
Posts: 3,329
Likes: 3,009
Liked 2,922 Times in 992 Posts
|
|
.455 Mk II s/n 41893
Jim,
Thanks for your efforts . . . please include in your study data the following .455 Mk II s/n 41893 that shipped February 3, 1916 to Remington UMC for the British Government. It does not have a factory caliber stamp but is stamped on the left side of the barrel .45 COLT by whoever did the caliber conversion.
Russ
|
The Following 2 Users Like Post:
|
|
10-31-2019, 11:34 AM
|
US Veteran
|
|
|
Join Date: Feb 2005
Location: The SW Va Blue Ridge
Posts: 17,524
Likes: 89,687
Liked 24,881 Times in 8,519 Posts
|
|
Whoever did the stamping on linde's .455 to .45 Colt conversion did a very good job. The letters are pretty close to what S&W did with their roll stamp. Most look like they were done by a blind monkey with palsy. Please note that I didn't say a GORILLA.
__________________
John 3:16
WAR EAGLE!
|
The Following 3 Users Like Post:
|
|
10-31-2019, 11:55 AM
|
|
SWCA Member
|
|
|
Join Date: Dec 2007
Location: Orange County, CA
Posts: 13,995
Likes: 5,005
Liked 7,699 Times in 2,623 Posts
|
|
Jim, thank you for the updated roster in post #233.
In case you'd like to add a note, .455 TL no. 358 has been converted to .45 Colt in the thoughtful manner that allows it to shoot the .455 round as well.
__________________
David Wilson
|
The Following 3 Users Like Post:
|
|
11-01-2019, 02:17 AM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,248
Likes: 11,903
Liked 20,594 Times in 8,582 Posts
|
|
Quote:
Originally Posted by linde
Jim,
Thanks for your efforts . . . please include in your study data the following .455 Mk II s/n 41893 that shipped February 3, 1916 to Remington UMC for the British Government. It does not have a factory caliber stamp but is stamped on the left side of the barrel .45 COLT by whoever did the caliber conversion.
Russ
|
Yes it's there in group 3. It surely was marked 455 because it's in the middle of the period when they all were. It looks like it was removed, the nice 45 Colt stamp added and then cold blued which has worn off.
__________________
Jim
S&WCA #819
|
The Following User Likes This Post:
|
|
11-01-2019, 02:38 AM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,248
Likes: 11,903
Liked 20,594 Times in 8,582 Posts
|
|
Quote:
Originally Posted by younggun22
I recently picked up serial number 489 and the barrel lacks a caliber roll mark.
If am missing any info let me know!
|
Thank you! It's on the list probably by a previous owner.
__________________
Jim
S&WCA #819
|
12-01-2019, 11:45 AM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,248
Likes: 11,903
Liked 20,594 Times in 8,582 Posts
|
|
Quote:
Originally Posted by DCWilson
Jim, thank you for the updated roster in post #233.
In case you'd like to add a note, .455 TL no. 358 has been converted to .45 Colt in the thoughtful manner that allows it to shoot the .455 round as well.
|
David, that info has been added including in post #233.
Thank you,
__________________
Jim
S&WCA #819
|
The Following 2 Users Like Post:
|
|
01-20-2020, 11:21 AM
|
Member
|
|
|
Join Date: Jan 2020
Location: Pacific NW
Posts: 3
Likes: 0
Liked 1 Time in 1 Post
|
|
Mk II HE SN 5907
This should help you pin down the early end of your third category of .455 Hand Ejector. SN 5907, caliber .455 Colt/Eley/Webley Mk I but no caliber marking; crossed pennants on left frame ahead of cylinder and on back of cylinder, small broad arrow and British proof on left side of knuckle. Finish is mostly gone to brown, but great mechanics and bore.
--DJ
|
The Following User Likes This Post:
|
|
02-03-2020, 07:36 PM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,248
Likes: 11,903
Liked 20,594 Times in 8,582 Posts
|
|
Quote:
Originally Posted by BP Dave
This should help you pin down the early end of your third category of .455 Hand Ejector. SN 5907, caliber .455 Colt/Eley/Webley Mk I but no caliber marking; crossed pennants on left frame ahead of cylinder and on back of cylinder, small broad arrow and British proof on left side of knuckle. Finish is mostly gone to brown, but great mechanics and bore.
--DJ
|
Yes that's the earliest so far in the 3rd category.
Thank you.
__________________
Jim
S&WCA #819
|
05-10-2020, 04:39 PM
|
|
Member
|
|
|
Join Date: Apr 2006
Location: Southern Illinois
Posts: 782
Likes: 648
Liked 229 Times in 81 Posts
|
|
I finally joined your ranks folks with what would be Category 3. Ist Model Triple Lock #12740. Marked Smith & Wesson .455. on left side of barrel. Factory letter puts it as one of the Shapleigh Hardware guns. No visible numbers on inside of grip panels.
__________________
Always bet on stupidity.
Last edited by Deacon KC; 05-10-2020 at 04:40 PM.
|
The Following User Likes This Post:
|
|
05-10-2020, 04:54 PM
|
|
Member
|
|
|
Join Date: May 2018
Posts: 231
Likes: 4,947
Liked 152 Times in 81 Posts
|
|
Mine is # 5253, british proofs, 6 1/2", Lanyard.No cal marking. Shipped 1 1915. JIM
__________________
S&WHF # 602
Last edited by 22/32 JDF; 05-10-2020 at 04:56 PM.
|
05-10-2020, 04:59 PM
|
|
Member
|
|
|
Join Date: Jul 2012
Location: Richmond, Virginia
Posts: 4,028
Likes: 3,242
Liked 3,855 Times in 1,965 Posts
|
|
Glad to see this thread get kicked back up into my feed. Arguably my favorite thread going here on the forum.
__________________
Some Might Say.
|
05-10-2020, 05:35 PM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,248
Likes: 11,903
Liked 20,594 Times in 8,582 Posts
|
|
Quote:
Originally Posted by Deacon KC
I finally joined your ranks folks with what would be Category 3. Ist Model Triple Lock #12740. Marked Smith & Wesson .455. on left side of barrel. Factory letter puts it as one of the Shapleigh Hardware guns.
|
Thank you! That is actually a Category 4. 1st Model TL. And lived its entire life in the USA as a 'civilian'!
__________________
Jim
S&WCA #819
Last edited by Hondo44; 05-10-2020 at 05:41 PM.
|
The Following User Likes This Post:
|
|
05-10-2020, 05:39 PM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,248
Likes: 11,903
Liked 20,594 Times in 8,582 Posts
|
|
Quote:
Originally Posted by 22/32 JDF
Mine is # 5253, british proofs, 6 1/2", Lanyard.No cal marking. Shipped 1 1915. JIM
|
Thank you!
__________________
Jim
S&WCA #819
|
The Following User Likes This Post:
|
|
05-10-2020, 08:21 PM
|
|
Member
|
|
|
Join Date: Nov 2009
Location: Argentina
Posts: 268
Likes: 2,439
Liked 425 Times in 143 Posts
|
|
Quote:
Originally Posted by Hondo44
netex,
Thx for the additional info on your #3424 which indicates it's a Triple Lock, 455 HE - 1st Model, it's a very interesting example.
It having the front sight regulated for 100 yards has resulted in the very high POI at 50 feet as you are aware. It would have shot to point of aim at that range in factory configuration. A previous owner has certainly made changes for their specific needs.
1. Does the barrel have a shroud under the barrel for the Extractor rod? And does it still have a functioning third lock at the front of the yoke? If so, I'm very curious about where a # 10,001 triple Lock barrel in 45 caliber came from!
Triple lock photos:
Photos by Driftwood Johnson
Photos by Driftwood Johnson
2. The cyl was converted to 45 Colt in a very professional manner, still allowing the use of the original 455 cartridges. Does the cyl retain the #3424 serial # matching the gun?
3. Since the serial is removed from the butt, where else on the gun do you find the # 3424?
4. The grips are interesting to say the least and another question is how are they held on the grip frame w/o a center screw?
|
Very didactic, clear and neat photographs!!! Thank you for sharing this pictures, this is a very good discussion on "rare" triple lock S&W revolvers!!!!....
RR
__________________
"Off we go..."
|
The Following 3 Users Like Post:
|
|
05-11-2020, 04:41 PM
|
SWCA Member
|
|
|
Join Date: Feb 2003
Location: Michigan
Posts: 7,863
Likes: 11,830
Liked 13,811 Times in 3,357 Posts
|
|
This is the only Triple Lock I own. A British Contract gun serial number 4178 which was issued to Capt. Leonard Francis Cass of the 7th Royal Sussex Regiment, British Army. He was killed by a sniper at Festubert France on on 12-13-15.
|
The Following 4 Users Like Post:
|
|
05-11-2020, 09:01 PM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,248
Likes: 11,903
Liked 20,594 Times in 8,582 Posts
|
|
moosedog,
Wow that's a stunner! Good documentation too. I'd love to know where it went from 12-13-15 and how it returned stateside.
It has no proof stamps normally required for export thru official channels depending on when it came back across the big pond.
Likely by unofficial means which is cool because it's not all stamped up. Just enough marks to show where it was issued and trace to whom.
Thx for sharing your 455 with us and contributing to the research!
__________________
Jim
S&WCA #819
Last edited by Hondo44; 05-11-2020 at 10:46 PM.
|
The Following User Likes This Post:
|
|
05-27-2020, 09:32 AM
|
|
Member
|
|
|
Join Date: Jan 2011
Location: Florida
Posts: 135
Likes: 349
Liked 255 Times in 54 Posts
|
|
Jim,
You can add 1055 to the list of category number 2.
It has no barrel caliber markings. It has 2 Brit proof's similar to moosedogs gun shown in above posting.
It has been converted to 45 long colt along the way.
Thank you for all the hard work and contribution to this forum!
Adam
__________________
Adam-12
Last edited by Adam Baker; 06-03-2020 at 06:03 PM.
|
The Following User Likes This Post:
|
|
|
|
Posting Rules
|
|
|
|
|