|
|
|
02-15-2018, 10:55 PM
|
|
Member
|
|
|
Join Date: Feb 2018
Posts: 125
Likes: 11
Liked 776 Times in 72 Posts
|
|
K22 - 1952 model restore project - final pics added - and a couple of range pics
Hello all,
I inherited this from my father , who had another from the early 60s , but this one he bought just a few years ago. It had a rough reblue and some pitting under the finish.
So I thought this would be good candidate for restore since the original finish was already kinda messed up .
I believe the gun was hot dipped without even taking off the rear sight and consequently the plungers and springs were solid rust and impossible to remove with out damage so I need some rear sight parts which I believe I can get from Brownells .
I also need a barrel pin . The old gun seems to be cleaning up well , I was able to get the pitting out with careful work by hand . ( No buffers in this shop.) Slow rust blue on the agenda once everything is corrected and fit .
If anyone knows where I could get a pin I would appreciate the help . If not I could make one out a gauge pin , it is around .069- .
It has been since the 80s that I have spent much time with the s & w revolvers , a new trigger return spring that is not so heavy is maybe something that I would consider , where would you guys suggest a spring kit / upgrade?
Thanks for looking .
KR
Last edited by John1125; 03-22-2018 at 08:57 PM.
|
The Following 35 Users Like Post:
|
ameridaddy, bigmoose, BillyMagg, Bobbysixkiller, boykinlp, CajunBass, cgt4570, Collects, contender85, damienph, Eddie Southgate, Frank46, Hondo44, Indynick, Jdavis, Jebus35745, jmace57, JSR III, kennethg, kobsw, long colt frazier, lscocoa, Muley Gil, PNY UP, Raystown, S&WsRsweet, series guy, Tadeus67, Usmc5811, Valmet, VNK971, vonn, Wiregrassguy, wundudnee, wx7b |
02-16-2018, 07:49 AM
|
Member
|
|
|
Join Date: Apr 2009
Location: East Central Florida
Posts: 1,935
Likes: 4,776
Liked 4,289 Times in 1,198 Posts
|
|
Try S&W
A few years ago I needed to replace a front sight pin on one of my older Model 29-2s, so I thought it might be worth contacting S&W's Service Dept. A sight pin arrived in the mail a few days later...no charge! Might be worth a try. Good luck.
|
The Following 2 Users Like Post:
|
|
02-16-2018, 08:17 AM
|
|
US Veteran
|
|
|
Join Date: Feb 2003
Location: Homerville, Ohio
Posts: 5,407
Likes: 28,681
Liked 9,263 Times in 2,384 Posts
|
|
It's easy enough to make a barrel pin from either a letter drill bit or a pin gauge, or try Gun Parts Inc. Just round off the ends like an original one.
For a lighter trigger return spring check with Wolff Gunsprings in PA.
Very nice job on polishing the gun and cylinder. Keep us informed as the project progresses.
|
The Following User Likes This Post:
|
|
02-16-2018, 08:24 AM
|
Member
|
|
|
Join Date: May 2017
Location: TTown Alabama ,Roll Tide
Posts: 1,652
Likes: 9,772
Liked 2,220 Times in 1,031 Posts
|
|
Second on wolf springs they make a good product. That is going to be a good looker when you get done hope you will continue to keep us updated on progress. And of course at the end we will want a range report .you know how we are lol.
|
02-16-2018, 09:27 AM
|
|
SWCA Member
|
|
|
Join Date: Jun 2004
Location: Mount Carmel, TN USA
Posts: 3,171
Likes: 1,628
Liked 3,178 Times in 933 Posts
|
|
Numrich has the barrel pins. I just bought a few spares from them. Can't wait to see the finished product. I've rust blued a couple shotgun barrels, but haven't tried it on a Smith yet. I have a rough 1917 frame project on my bench I've been working the pits out of. I might try it on that one.
__________________
Chris
SWCA #2243 SWHF #292
|
The Following User Likes This Post:
|
|
02-16-2018, 10:22 AM
|
|
Member
|
|
|
Join Date: Feb 2018
Posts: 125
Likes: 11
Liked 776 Times in 72 Posts
|
|
Quote:
Originally Posted by cgt4570
Numrich has the barrel pins. I just bought a few spares from them. Can't wait to see the finished product. I've rust blued a couple shotgun barrels, but haven't tried it on a Smith yet. I have a rough 1917 frame project on my bench I've been working the pits out of. I might try it on that one.
|
Thanks , I did a search and found the pins, they were not listed in the schematics .
I like rust bluing , here's an old colt that I did :
|
The Following 32 Users Like Post:
|
992B, ameridaddy, arjay, bgrafsr, bigmoose, BillyMagg, boykinlp, damienph, Dr Charlie, Eddie Southgate, Frank46, H Richard, Igiveup, Jdavis, jmace57, jrm53, lscocoa, mh51, Muley Gil, Ole Joe Clark, Ozark Marine, S&WsRsweet, SD95B, series guy, tjpopkin, turnerriver, Usmc5811, vonn, weatherby, Wiregrassguy, wundudnee, wx7b |
02-16-2018, 10:25 AM
|
|
SWCA Member
|
|
|
Join Date: Apr 2009
Location: Salmon, Idaho
Posts: 3,270
Likes: 4,141
Liked 9,512 Times in 1,465 Posts
|
|
Looks like it's coming along nicely, I have often wanted to do that with a couple of my S&W's that have issues. I have taken some completely apart but not to the extent you have gone.
Look forward to future updates!!
__________________
Tom Graham SWCA #2303
|
The Following User Likes This Post:
|
|
02-16-2018, 10:26 AM
|
|
SWCA Member
|
|
|
Join Date: Apr 2009
Location: Salmon, Idaho
Posts: 3,270
Likes: 4,141
Liked 9,512 Times in 1,465 Posts
|
|
As for gun parts, check with LEE's they have lots of small parts still available and will probably have what you need.
Lee's Gun Parts
Good luck,
__________________
Tom Graham SWCA #2303
|
The Following User Likes This Post:
|
|
02-16-2018, 12:28 PM
|
|
US Veteran
|
|
|
Join Date: Aug 2006
Location: West Central IL
Posts: 22,809
Likes: 18,563
Liked 22,431 Times in 8,279 Posts
|
|
I'd recommend a 14 lb rebound spring for a nicer trigger pull. Rear sight replacement kit with screw and nut, and springs and detente for both windage and elevation S&W and/or possible Brownells for new parts, inexpensive. Looks like a really nice job so far.
__________________
H Richard
SWCA1967 SWHF244
|
The Following User Likes This Post:
|
|
02-16-2018, 12:49 PM
|
|
SWCA Member
|
|
|
Join Date: Apr 2008
Location: South Carolina
Posts: 7,255
Likes: 18,664
Liked 11,131 Times in 3,313 Posts
|
|
Quote:
Originally Posted by John1125
Thanks , I did a search and found the pins, they were not listed in the schematics .
I like rust bluing , here's an old colt that I did :
|
John,
Very impressive job you did! How long does it take to do the rust bluing?
Larry
__________________
Miss My Buddy crsides!!
|
The Following User Likes This Post:
|
|
02-16-2018, 01:52 PM
|
|
Member
|
|
|
Join Date: Feb 2018
Posts: 125
Likes: 11
Liked 776 Times in 72 Posts
|
|
That one was 7 cycles. The cycle of rust boil then carding takes from 3-12 hours depending on temp and humidity in the rust box and alloy of steel.
Sent from my iPhone using Tapatalk
__________________
GVF Investments
Kingman , Ks
|
The Following User Likes This Post:
|
|
02-16-2018, 01:54 PM
|
|
Member
|
|
|
Join Date: Feb 2018
Posts: 125
Likes: 11
Liked 776 Times in 72 Posts
|
|
It’s called slow rust bluing for reason you don’t wanna have too much on your dance card for about three days
Sent from my iPhone using Tapatalk
__________________
GVF Investments
Kingman , Ks
|
The Following 2 Users Like Post:
|
|
02-16-2018, 11:57 PM
|
Banned
|
|
|
Join Date: May 2007
Location: Montana
Posts: 2,142
Likes: 2,064
Liked 3,137 Times in 644 Posts
|
|
Nice~~~lets see the after photos.
|
The Following User Likes This Post:
|
|
02-25-2018, 09:39 AM
|
|
Member
|
|
|
Join Date: Feb 2018
Posts: 125
Likes: 11
Liked 776 Times in 72 Posts
|
|
Just a pic of the progress so far. 7 cycles on the small parts and side plate and this picture shows the frame/barrel with 3 cycles .
Coming along very well. Looks to be darkening up good.
Thanks for looking ,
Kirk
|
The Following 12 Users Like Post:
|
arjay, BillyMagg, D1911, Frank46, Jebus35745, lscocoa, mscook, Ngtdog, Ole Joe Clark, S&WsRsweet, vonn, Wiregrassguy |
02-25-2018, 10:29 AM
|
|
US Veteran
|
|
|
Join Date: Nov 2009
Location: Michigan Western UP
Posts: 12,977
Likes: 3,048
Liked 14,371 Times in 5,477 Posts
|
|
Great work so far. I have rust blued for many years and helped others with their projects. The most important part of the process is to not rush to completion. S&W has many different steel characteristics on their guns, with some heat tempered to different levels than others. The key is to not to rush the completion. In time, all parts will show the same level of deep black/blue and it often takes me 20 cycles or more to achieve the depth and uniformity across the parts. Winter is not the best time to rust blue, since humidity is needed, the more the better. Don't quit too soon. Watch the cylinder and sideplate, since they are the two hardened parts that take the longest to get the color to match the rest of the gun.
Only oiling the finish will give you a look at the final appearance and you do not want to do that until you are certain everything is complete. Apply only a light coat of oil to the exterior surfaces at first, then inspect closely. If you get to that final part of the project and see a difference in finishes, strip the oil and continue to apply the solution. I am sure that K-22 will look very nice and good luck with getting your father's revolver back to the heirloom you want for the future family generations to enjoy.
__________________
Gary
SWCA 2515
|
The Following 2 Users Like Post:
|
|
02-25-2018, 10:41 AM
|
|
Member
|
|
|
Join Date: Feb 2018
Posts: 125
Likes: 11
Liked 776 Times in 72 Posts
|
|
Thanks for the encouragement,I do have a rust box and can control the temp and humidity which speeds things up. I agree there are various levels of hardness and different alloys of metal. I also have had to start over or continue with more cycles.
Kirk
Sent from my iPhone using Tapatalk
__________________
GVF Investments
Kingman , Ks
|
The Following User Likes This Post:
|
|
03-01-2018, 10:22 PM
|
|
Member
|
|
|
Join Date: Feb 2018
Posts: 125
Likes: 11
Liked 776 Times in 72 Posts
|
|
Just a quick pic to update you guys . I showed a black glove for color reference . I have the gun hanging up this evening oiled up and will complete the reassembly in the next couple of days or so and get some final pics posted .
I like what I am seeing so far. This was 8 cycles on the frame/barrel and 12 on the side plate and cylinder and yoke .
Kirk
|
The Following 15 Users Like Post:
|
ameridaddy, arjay, bgrafsr, BillyMagg, damienph, Eddie Southgate, FifthWheel, Frank46, Jdavis, jmace57, lscocoa, Ngtdog, S&WsRsweet, vonn, Wiregrassguy |
03-02-2018, 12:34 AM
|
|
US Veteran
|
|
|
Join Date: Dec 2004
Location: Connecticut Yankee
Posts: 2,380
Likes: 744
Liked 3,575 Times in 789 Posts
|
|
You sure do know how to make an entrance sir. Don't be surprised if people start requesting your services.
Paul
__________________
"NUTS"
|
The Following User Likes This Post:
|
|
03-02-2018, 12:56 AM
|
Member
|
|
|
Join Date: Feb 2009
Location: CA
Posts: 1,530
Likes: 792
Liked 679 Times in 437 Posts
|
|
Looks really nice. Look forward to seeing the end results.
|
The Following User Likes This Post:
|
|
03-02-2018, 01:13 AM
|
SWCA Member
|
|
|
Join Date: Feb 2006
Location: Pikeville, Tennessee
Posts: 6,073
Likes: 924
Liked 9,969 Times in 3,664 Posts
|
|
First and foremost, my compliments--------you do good work!!
Second, the only spring kit I've used/know anything about is that provided by Jerry Miculek (BANG, Inc.). It is merely excellent---and contains both the mainspring and the rebound slide spring. (And as one who ignored his instructions because I have no need for such instructions, I am uniquely qualified to recommend that they be followed to the letter. You get to start over otherwise.)
Ralph Tremaine
Last edited by rct269; 03-02-2018 at 01:18 AM.
|
The Following 2 Users Like Post:
|
|
03-02-2018, 01:07 PM
|
Member
|
|
|
Join Date: Jun 2001
Location: Florence, Alabama, USA
Posts: 2,349
Likes: 40
Liked 1,398 Times in 774 Posts
|
|
Rimfires need a harder whack. A review of the Wilson spring set reports misfires in a 617. A little less rebound spring might be all you can do.
|
03-03-2018, 07:09 PM
|
|
Member
|
|
|
Join Date: Feb 2018
Posts: 125
Likes: 11
Liked 776 Times in 72 Posts
|
|
|
The Following 67 Users Like Post:
|
2152hq, 230grfmj, 357magster, 625-7, 6518John, 6actual, 992B, ameridaddy, arjay, bgrafsr, bigmoose, boykinlp, CajunBass, Chevelle69, Collects, damienph, Dave from Pa, delta-419, Dennis, Dieseltech56, DocB, Dr Charlie, Eddie Southgate, FifthWheel, george_lehr, gunnails, H Richard, hiconesmith, Iggy, Indynick, Jebus35745, jhde69, jmace57, JohnRippert, jrm53, Kurusu, LedFowl, lscocoa, lunger, merl67, mod29, Model52guy, moosedog, mscook, MSgt G, Ngtdog, nuguy, okiegtrider, OldChief, Old_Cop, perryhd, R.J. in Phoenix, rkwood, RoadVirus, Ronbo, Roper1628, S&WsRsweet, Tadeus67, THREEDFLYER, tndrfttom, trashy, TTSH, Valmet, vonn, Wiregrassguy, wundudnee, wx7b |
03-03-2018, 07:22 PM
|
|
US Veteran
|
|
|
Join Date: Jul 2013
Location: Southwest Iowa
Posts: 10,867
Likes: 2,688
Liked 18,970 Times in 5,589 Posts
|
|
Beautiful work. Great job.
__________________
Mike
S&WCA #3065
|
03-03-2018, 08:00 PM
|
Member
|
|
|
Join Date: Nov 2006
Location: Montana
Posts: 5,164
Likes: 3,441
Liked 6,258 Times in 2,063 Posts
|
|
Just fabulous in ALL regards....A true craftsman !
Randy
|
03-03-2018, 08:11 PM
|
|
Member
|
|
|
Join Date: Jul 2013
Location: Mexico
Posts: 379
Likes: 4,067
Liked 509 Times in 197 Posts
|
|
Beautiful! The project came out great, congratulations!
__________________
"lets be careful out there"
|
03-03-2018, 08:53 PM
|
US Veteran
|
|
|
Join Date: Nov 2005
Location: SW Oregon
Posts: 91
Likes: 785
Liked 80 Times in 36 Posts
|
|
Some sort of game call?
Beautiful work.
|
03-03-2018, 09:11 PM
|
Member
|
|
|
Join Date: Jul 2005
Location: Cedaredge Co.
Posts: 2,298
Likes: 11
Liked 2,764 Times in 984 Posts
|
|
Very nice looking and I would say some sort of duck call.
|
The Following User Likes This Post:
|
|
03-03-2018, 09:25 PM
|
Member
|
|
|
Join Date: Feb 2014
Location: Detroit Area
Posts: 250
Likes: 648
Liked 103 Times in 70 Posts
|
|
Wow, just wow.
Is the finish hard, or does it scratch easily?
|
The Following User Likes This Post:
|
|
03-03-2018, 10:19 PM
|
|
SWCA Member
|
|
|
Join Date: Apr 2009
Location: Salmon, Idaho
Posts: 3,270
Likes: 4,141
Liked 9,512 Times in 1,465 Posts
|
|
Well done!
I just sent my M-48 off to the "Blues Brothers" here in Prescott Valley for a refinish. The frame was flecking badly but the barrel/cylinder were in perfect shape.....go figure!
__________________
Tom Graham SWCA #2303
|
The Following User Likes This Post:
|
|
03-04-2018, 07:54 AM
|
Member
|
|
|
Join Date: May 2017
Location: TTown Alabama ,Roll Tide
Posts: 1,652
Likes: 9,772
Liked 2,220 Times in 1,031 Posts
|
|
That came out great man you really showed off . Thanks for keeping us updated .
|
The Following User Likes This Post:
|
|
03-04-2018, 08:17 PM
|
Member
|
|
|
Join Date: Feb 2009
Location: CA
Posts: 1,530
Likes: 792
Liked 679 Times in 437 Posts
|
|
Turned out very nice, thanks for showing us.
|
The Following User Likes This Post:
|
|
03-04-2018, 10:47 PM
|
SWCA Member
|
|
|
Join Date: Apr 2011
Location: Northern Middle Tennessee
Posts: 2,915
Likes: 3,428
Liked 4,120 Times in 1,462 Posts
|
|
Beautiful work sir I would love to give that a try, I might have to find me an older finished challenged revolver like a Rossi or Taurus to practice on.
|
The Following User Likes This Post:
|
|
03-04-2018, 11:17 PM
|
Member
|
|
|
Join Date: Jun 2012
Location: Central Obamastan
Posts: 1,056
Likes: 16,791
Liked 803 Times in 419 Posts
|
|
Spy Eye Liner
Quote:
Originally Posted by Marshal tom
Very nice looking and I would say some sort of duck call.
|
Naw! that's Mata Hari's tube of eyeliner!
|
The Following User Likes This Post:
|
|
03-05-2018, 08:13 AM
|
|
Member
|
|
|
Join Date: Feb 2018
Posts: 125
Likes: 11
Liked 776 Times in 72 Posts
|
|
Thank you gentlemen for all the kind words.
The prop is an oiler that was in the buttstock of a G43 that the wife's uncle brought home from Germany in 1945 . The rifle was brand new in the crate when they found them.
The oiler has not seen daylight in over 70 years. It is made of bakalite and spring loaded but was never filled with oil .
Oh and that is his hat too , from England circa 1942 .
Kirk
|
The Following 2 Users Like Post:
|
|
03-05-2018, 12:59 PM
|
Member
|
|
|
Join Date: Apr 2016
Posts: 1,464
Likes: 3,979
Liked 2,918 Times in 803 Posts
|
|
Great job, looks professional to me! When you finish the rear sight let us know how it shoots. I'm sure it will be dead on.
|
03-05-2018, 06:21 PM
|
|
SWCA Member
|
|
|
Join Date: Jun 2000
Location: Massachusetts USA
Posts: 9,597
Likes: 3,713
Liked 8,952 Times in 3,558 Posts
|
|
Very nice and you obviously have the patience of Job.
__________________
James Redfield
LM #497
|
03-22-2018, 09:01 PM
|
|
Member
|
|
|
Join Date: Feb 2018
Posts: 125
Likes: 11
Liked 776 Times in 72 Posts
|
|
It was 6 inch day at the range .
The old K22 shot excellent .
Kirk
|
The Following 6 Users Like Post:
|
|
03-22-2018, 09:28 PM
|
|
US Veteran
|
|
|
Join Date: Jul 2013
Location: Southwest Iowa
Posts: 10,867
Likes: 2,688
Liked 18,970 Times in 5,589 Posts
|
|
A great ending to a work of love.
__________________
Mike
S&WCA #3065
|
03-22-2018, 10:58 PM
|
|
US Veteran
|
|
|
Join Date: Dec 2004
Location: Connecticut Yankee
Posts: 2,380
Likes: 744
Liked 3,575 Times in 789 Posts
|
|
That is sure pretty spiffy. My kinda guy. Sows ear to silk purse. Hard work and patience. Kudos.
DW
__________________
"NUTS"
|
The Following User Likes This Post:
|
|
03-22-2018, 11:08 PM
|
SWCA Member
|
|
|
Join Date: Aug 2012
Location: central Texas
Posts: 1,134
Likes: 2,782
Liked 1,291 Times in 637 Posts
|
|
Just pure skill and patience. Fantastic work!
Mike
|
03-23-2018, 08:34 AM
|
Member
|
|
|
Join Date: Jul 2010
Location: Central VA
Posts: 8,660
Likes: 1,571
Liked 9,429 Times in 4,226 Posts
|
|
Making it pretty probably didn’t make it shoot any better, but shooting that well sure makes it pretty in my mind’s eye! This was an excellent project and the outcome was outstanding. Congratulations!
Froggie
|
03-23-2018, 09:24 AM
|
|
SWCA Member
|
|
|
Join Date: Jun 2005
Location: big sky country montana
Posts: 1,332
Likes: 720
Liked 6,411 Times in 545 Posts
|
|
Hi
I did my first one last summer at SDH Class if you want to do this kind of work you need to go to SDH,s class he has one very year.
There is a thread on the fourm with pictures of the 1917 I did in class.
Jim Fisher LM1491
|
03-23-2018, 09:33 AM
|
|
SWCA Member
|
|
|
Join Date: Jun 2000
Location: Massachusetts USA
Posts: 9,597
Likes: 3,713
Liked 8,952 Times in 3,558 Posts
|
|
As I said before great job. My only comment is that I think that you need to find some period stocks to complete it. According to the charts, your gun would have shipped in 1952 and therefore the stocks would have diamonds around the screw escutcheon. Your stocks without a diamond would be from post 1968.
Small detail on a beautiful restoration job however, after doing all of that caring work, I believe it needs age appropriate shoes.
__________________
James Redfield
LM #497
|
03-23-2018, 11:41 AM
|
|
SWCA Member
|
|
|
Join Date: Jul 2004
Location: upper corner lower alabam
Posts: 2,519
Likes: 0
Liked 5,302 Times in 1,516 Posts
|
|
Beautiful work!! Obvious it was a labor of love. I really like the front sight too. Is that a Keith type long range or just deep serrations?
__________________
PTLAPTA!
|
03-23-2018, 07:24 PM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,251
Likes: 11,929
Liked 20,598 Times in 8,583 Posts
|
|
Beautiful, the polish is the secret. Looks just like a post war, pre ~1955 factory satin blue. What was the final grit finish you ended with?
__________________
Jim
S&WCA #819
|
The Following User Likes This Post:
|
|
03-23-2018, 07:48 PM
|
|
Member
|
|
|
Join Date: Feb 2018
Posts: 125
Likes: 11
Liked 776 Times in 72 Posts
|
|
Quote:
Originally Posted by S&W ucla
Beautiful work!! Obvious it was a labor of love. I really like the front sight too. Is that a Keith type long range or just deep serrations?
|
Good eye ! The front sight was dinged pretty good so I took my 25 lpi checkering file and reworked the front sight . It looks OK to my eyes . I figured I was working with what I had .
Kirk
|
03-23-2018, 07:54 PM
|
|
Member
|
|
|
Join Date: Feb 2018
Posts: 125
Likes: 11
Liked 776 Times in 72 Posts
|
|
Quote:
Originally Posted by Hondo44
Beautiful, the polish is the secret. Looks just like a post war, pre ~1955 factory satin blue. What was the final grit finish you ended with?
|
I ended up at 320 grit for the most part . Then went with a slow rust blue , I used brownells slow rust solution . It etched a bit more than I would have liked on the flats . So the satin finish look.
Kirk
|
03-23-2018, 08:11 PM
|
|
Member
|
|
|
Join Date: Feb 2018
Posts: 125
Likes: 11
Liked 776 Times in 72 Posts
|
|
Quote:
Originally Posted by JSR III
As I said before great job. My only comment is that I think that you need to find some period stocks to complete it. According to the charts, your gun would have shipped in 1952 and therefore the stocks would have diamonds around the screw escutcheon. Your stocks without a diamond would be from post 1968.
Small detail on a beautiful restoration job however, after doing all of that caring work, I believe it needs age appropriate shoes.
|
Thanks , I do believe that would be a good idea to replace the stocks with period correct . I thought that the stocks were replacement . Like I said when I started this pistol was pretty rough and thankfully nobody buffed this one beyond recognition.
I have one more issue or question for you guys , the ejector rod has quite a bit of run out , so do I replace it (right hand thread not all that available ) or get a yoke/ ejector rod jig to straighten things out . I'm not opposed to buying tools for a good cause and have a few others that could use a tune up also.
The gun has a position or two where its harder than the others to cock so I'm thinking the ejector rod being bent maybe having an impact . Maybe I need to check the yoke alignment also?
Its not a huge problem but one I would like to address at some point and unsure how to proceed .
Thanks ,
Kirk
|
03-23-2018, 08:32 PM
|
SWCA Member
|
|
|
Join Date: Oct 2007
Location: California
Posts: 19,251
Likes: 11,929
Liked 20,598 Times in 8,583 Posts
|
|
Kirk,
Yoke miss-alignment will be felt on all 6 cycles of the hammer. I believe you're right on the ext rod since you can see the run out.
Remove the rod and roll it on a flat surface like a piece of glass, a table saw surface, etc. They're not that hard to straighten with a rawhide, plastic or lead hammer.
FYI for future reference, S&W serrations on sights and barrel ribs are 40 LPI.
__________________
Jim
S&WCA #819
|
03-23-2018, 09:04 PM
|
|
Member
|
|
|
Join Date: Feb 2018
Posts: 125
Likes: 11
Liked 776 Times in 72 Posts
|
|
Quote:
Originally Posted by Hondo44
Kirk,
Yoke miss-alignment will be felt on all 6 cycles of the hammer. I believe you're right on the ext rod since you can see the run out.
Remove the rod and roll it on a flat surface like a piece of glass, a table saw surface, etc. They're not that hard to straighten with a rawhide, plastic or lead hammer.
FYI for future reference, S&W serrations on sights and barrel ribs are 40 LPI.
|
Thank you Jim , I was sure that the front sight serrations were not correct , but I'm the kinda guy that uses what he has sometimes without much thought since the sight was in bad shape anyway so not much to loose .
I'll work more on the rod like you said , I made a feeble attempt at straightening it , more dedicated try this weekend.
Kirk
|
|
|
Posting Rules
|
|
|
|
|