Smith & Wesson Forum

Go Back   Smith & Wesson Forum > >


Reply
 
Thread Tools Display Modes
  #1  
Old 04-16-2018, 11:11 PM
Kollector03 Kollector03 is offline
Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Feb 2013
Location: Minnesota
Posts: 27
Likes: 6
Liked 39 Times in 9 Posts
Default 1954 Pre-28 Highway Patrolman

Smith & Wesson 1954 Pre 28 Highway Patrolman .357 Magnum revolver. First year production. Serial number S 116835 and matches on frame, inside ejector rod housing, and cylinder. Nice honest vintage 5-screw N-Frame revolver that shows some nice holster wear and patina from duty usage. Grips and trigger shoe are not original.

I recently traded into this revolver, but soon discovered that this is more of a collector piece than a field carry or a daily shooter.
Attached Thumbnails
1954 Pre-28 Highway Patrolman-p1710302-jpg   1954 Pre-28 Highway Patrolman-p1710312-jpg  
Reply With Quote
  #2  
Old 04-16-2018, 11:55 PM
mh51 mh51 is offline
Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Aug 2012
Posts: 129
Likes: 366
Liked 88 Times in 47 Posts
Default

No offense, but the condition and originality aren't really what collectors are looking for. I'd carry it, shoot it, and enjoy one of S&W's pistols from
a great era.
Mike
Reply With Quote
The Following 6 Users Like Post:
  #3  
Old 04-17-2018, 12:12 AM
DWalt's Avatar
DWalt DWalt is offline
Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Dec 2009
Location: South Texas
Posts: 21,639
Likes: 2
Liked 12,411 Times in 6,997 Posts
Default

Agree it is best described as a shooter. Franzite plastic grips are far from original and the cylinder shows substantial wear, somewhat more so than the frame and barrel. I don't know how to explain that if that cylinder SN matches to the frame.

I show a SN on my list that is very close to S116835 which shipped in 9/54, so it is a first year of production. The first HP was SN S103500.
Reply With Quote
  #4  
Old 04-17-2018, 06:02 AM
TTSH's Avatar
TTSH TTSH is online now
Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Dec 2013
Location: MA
Posts: 5,429
Likes: 9,850
Liked 5,378 Times in 2,738 Posts
Default

I'd call that a perfect candidate for a premium refinishing job and new grips, but I am not one of those folks who worries about losing collector value so much as simply pleasing myself.
Reply With Quote
The Following User Likes This Post:
  #5  
Old 04-17-2018, 08:31 AM
Art Doc's Avatar
Art Doc Art Doc is online now
Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Jul 2002
Location: The kidney of Dixie.
Posts: 8,829
Likes: 36
Liked 8,580 Times in 2,224 Posts
Default

Refinishing definitely destroys value.

Not a rare collectible. Use it and enjoy it.

Here's mine about 412 digits earlier than yours (S116413) Shipped 9/3/54 to a hardware store in Seattle. Shows some holster wear but does still wear its original stocks.

__________________
Life is short. Art is long.
Reply With Quote
The Following 4 Users Like Post:
  #6  
Old 04-17-2018, 11:17 AM
DWalt's Avatar
DWalt DWalt is offline
Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Dec 2009
Location: South Texas
Posts: 21,639
Likes: 2
Liked 12,411 Times in 6,997 Posts
Default

If there is anyone in your immediate area who blues guns, you might see what he would charge to just blue the cylinder only. You could clean it up by hand yourself using #800 or finer sandpaper before bluing. The HPs had a matte finish when they left the factory anyway so a high polish is unnecessary. Bead blasting with fine media would also work OK. While correct stocks would be somewhat costly, you should be able to find some more presentable N-frame grips (not necessarily factory) at a reasonable price by keeping an eye on eBay listings.
Reply With Quote
  #7  
Old 04-17-2018, 11:38 AM
Swissfan Swissfan is offline
Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Sep 2013
Location: Kentucky
Posts: 31
Likes: 0
Liked 57 Times in 19 Posts
Default 1954 Pre-28 Highway Patrolman

I agree, shoot it like it was meant. I shoot mine, serial S115235.

http://smith-wessonforum.com/attachm...9&d=1486149366
Reply With Quote
The Following User Likes This Post:
  #8  
Old 04-17-2018, 11:48 AM
Minorcan Minorcan is offline
Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Apr 2018
Location: Georgia
Posts: 32
Likes: 1
Liked 37 Times in 17 Posts
Default

I woldn’t blue part of it as it would be more of a mismatch than now. It would also add costs and not improve its value or shootability. I would just enjoy shooting it.
Reply With Quote
The Following 2 Users Like Post:
  #9  
Old 04-17-2018, 11:50 AM
CajunBass's Avatar
CajunBass CajunBass is offline
Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Mar 2010
Location: North Chesterfield, Va.
Posts: 4,274
Likes: 3,432
Liked 6,446 Times in 1,784 Posts
Default

Quote:
Originally Posted by TTSH View Post
I'd call that a perfect candidate for a premium refinishing job and new grips, but I am not one of those folks who worries about losing collector value so much as simply pleasing myself.
I agree. I've often wondered how you destroy any collectors value, if it has no collectors value in the first place.

I might not refinish it (I'm too cheap to do that), but I'd darn sure shoot it.
__________________
John 3:16 .
Reply With Quote
The Following 3 Users Like Post:
  #10  
Old 04-17-2018, 11:51 AM
6actual's Avatar
6actual 6actual is offline
US Veteran
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Nov 2011
Location: Stuart, Fla
Posts: 412
Likes: 807
Liked 441 Times in 183 Posts
Default

Keep in mind you can spend money to "pretty" it up but it wont increase its value one dime. Its a fine pistol as it is, shoot and enjoy it. Some of my favorite shooting revolvers are the beaters like my old M10, M64 and a speed six that I don't have to worry about getting wet in the field or dings and scratches
__________________
It is the Indian not the arrow

Last edited by 6actual; 04-17-2018 at 11:55 AM.
Reply With Quote
The Following 2 Users Like Post:
  #11  
Old 04-17-2018, 11:57 AM
BAM-BAM BAM-BAM is online now
Member
 
Join Date: Oct 2005
Location: Western Pa.
Posts: 8,841
Likes: 175
Liked 10,095 Times in 4,780 Posts
Default

Wonder if an earlier owner used something on the cylinder to clean powder off...... or just ????????

While the bluing is worn...... no sign of rust or pitting.

I'd spend $120 for a set of real (Executioner) Stags and make that my woods carry in a nice Bianchi 111 Cyclone cross-draw!

Edit: good candidate for hard chrome!

Last edited by BAM-BAM; 04-17-2018 at 01:06 PM.
Reply With Quote
  #12  
Old 04-17-2018, 12:14 PM
2ffat's Avatar
2ffat 2ffat is offline
Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Apr 2016
Location: Southside Virginia
Posts: 163
Likes: 414
Liked 160 Times in 89 Posts
Default

The old Highway Patrolmen just beg to be shot. Don't worry about the collector's value. Shoot it.
Reply With Quote
  #13  
Old 04-17-2018, 12:54 PM
RobertJ.'s Avatar
RobertJ. RobertJ. is offline
Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Mar 2010
Location: Seaside, Oregon
Posts: 3,162
Likes: 4,461
Liked 4,626 Times in 1,557 Posts
Default

Quote:
Originally Posted by 6actual View Post
Keep in mind you can spend money to "pretty" it up but it wont increase its value one dime.
When it comes to dollar value, this is completely true.

However, dollar value isn't always consistent with personal value. I have guns that I value personally far above their dollar value.

If it increases the owner's enjoyment of it, then it's an increase in value for the owner, just not "dollar value".

Last edited by RobertJ.; 04-17-2018 at 01:33 PM.
Reply With Quote
The Following 3 Users Like Post:
  #14  
Old 04-17-2018, 02:06 PM
iPac's Avatar
iPac iPac is online now
Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Mar 2015
Posts: 1,119
Likes: 1,542
Liked 1,268 Times in 543 Posts
Default

I'd leave it just the way it is, a fantastic example of hand labor craftsmanship.

If you refinished it, you would risk losing those oh so flat frame & sideplate sides, and all the other dang near perfectly polished areas. They did them right back then. Pre-war2 then the '50s were another time in manufacturing and it would be a shame to take that away from examples.

I think that gun looks phenomenal just the way it is. Go run some magnum through it, built like a tank.

Last edited by iPac; 04-17-2018 at 02:09 PM.
Reply With Quote
The Following 2 Users Like Post:
  #15  
Old 04-17-2018, 03:24 PM
S&WIowegan S&WIowegan is offline
US Veteran
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: May 2004
Location: Iowa
Posts: 3,020
Likes: 7,393
Liked 2,066 Times in 1,076 Posts
Thumbs up

Get rid of the trigger shoe which is really just for single action target shooting. It's a real detriment for double action work.

If you have the cylinder refinished(which is purely your business) be sure and tell the bluer you need black, not blue. S&W made 27s blue and 28s black.
__________________
Bob.
SWCA 1821
Reply With Quote
  #16  
Old 04-17-2018, 05:11 PM
DWalt's Avatar
DWalt DWalt is offline
Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Dec 2009
Location: South Texas
Posts: 21,639
Likes: 2
Liked 12,411 Times in 6,997 Posts
Default

The only finish difference between the HP(M28) and the .357 Mag(M27) is that the latter has mirror polished metal prior to bluing, the M28 does not. The reason for my suggestion of bluing the cylinder only is to avoid rounding of corners and messing up the sharpness of markings and sideplate of the frame which does not look that bad. I don't think the blued cylinder will be that badly mismatched with the frame afterward and at worst will look much better than it does now. Alternatively, the entire gun could be given the beadblast treatment (using very fine media) and then hot blued. I have done that on numerous guns and it looks very good.
Reply With Quote
  #17  
Old 04-17-2018, 06:06 PM
Jack Flash's Avatar
Jack Flash Jack Flash is offline
SWCA Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: May 2005
Location: Michigan
Posts: 6,887
Likes: 15,850
Liked 5,880 Times in 2,257 Posts
Default

If you really are unhappy with what you have, sell it and buy one that is in the condition you desire. Calculate what it will cost to partially / completely reblue it at a reputable shop. Don't forget to add in shipping both ways if the shop is not local. You may be able to find one with an acceptable finish for less.
__________________
Splittin’ hairs, aint ya Boss?
Reply With Quote
The Following 3 Users Like Post:
  #18  
Old 04-18-2018, 03:26 PM
Kollector03 Kollector03 is offline
Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Feb 2013
Location: Minnesota
Posts: 27
Likes: 6
Liked 39 Times in 9 Posts
Default

i like the look of this vintage smith and have no plan to refinish it if i keep it. i traded into it and my preference for a field .357 would be a 4 inch K- frame.

Last edited by Kollector03; 04-19-2018 at 12:44 AM.
Reply With Quote
The Following 2 Users Like Post:
  #19  
Old 04-18-2018, 09:09 PM
Eddie Southgate's Avatar
Eddie Southgate Eddie Southgate is offline
Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Sep 2016
Location: Southern Middle Tennessee
Posts: 606
Likes: 1,413
Liked 634 Times in 296 Posts
Default

If it were mine I'd leave it like it is except the fake stags . I would carry it and shoot the hell out of it .

Eddie
__________________
Grumpy Old Man With a Gun
Reply With Quote
  #20  
Old 04-18-2018, 09:20 PM
TTSH's Avatar
TTSH TTSH is online now
Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Dec 2013
Location: MA
Posts: 5,429
Likes: 9,850
Liked 5,378 Times in 2,738 Posts
Default

I'd just like to know how it got that way. The rest of the gun looks great. Why or how would the cylinder lose all of its bluing like that?

I'm thinking replacement cylinder maybe?
Reply With Quote
  #21  
Old 04-18-2018, 09:42 PM
rgm36 rgm36 is offline
Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Feb 2011
Location: Fond du Lac WI
Posts: 756
Likes: 15
Liked 1,016 Times in 213 Posts
Default

Except for the cylinder, it looks fairly nice!

I agree that you would never get the cylinder to match well if you re-blue just it.

So - if it were mine - I would leave the rest and "Nickel" the cylinder to make a pinto out of it

That would make it quite a conversation piece that would look unique.

Nice gun - carry it proud.

Last edited by rgm36; 04-18-2018 at 09:44 PM.
Reply With Quote
The Following User Likes This Post:
  #22  
Old 04-18-2018, 10:48 PM
Derosa's Avatar
Derosa Derosa is offline
Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Dec 2009
Location: Texas
Posts: 524
Likes: 464
Liked 379 Times in 187 Posts
Default

Have a local smith do a trigger job - or Mr. Smith - Hand polish it. Smooth it. Send to Armaloy in TX. Satin finish inside & out. You will have a firearm for the ages.
Reply With Quote
  #23  
Old 04-18-2018, 11:20 PM
Kingspoke's Avatar
Kingspoke Kingspoke is offline
Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Feb 2017
Location: Kommiefornia
Posts: 338
Likes: 167
Liked 598 Times in 153 Posts
Default

Quote:
Originally Posted by Swissfan View Post
I agree, shoot it like it was meant. I shoot mine, serial S115235.

http://smith-wessonforum.com/attachm...9&d=1486149366
Very nice overall and I love those unrelieved diamond targets! Looks great!
Reply With Quote
  #24  
Old 04-19-2018, 12:45 AM
Kollector03 Kollector03 is offline
Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Feb 2013
Location: Minnesota
Posts: 27
Likes: 6
Liked 39 Times in 9 Posts
Default

Quote:
Originally Posted by TTSH View Post
I'd just like to know how it got that way. The rest of the gun looks great. Why or how would the cylinder lose all of its bluing like that?

I'm thinking replacement cylinder maybe?
cylinder serial matches, so its original.
Reply With Quote
The Following User Likes This Post:
  #25  
Old 04-19-2018, 04:19 AM
TTSH's Avatar
TTSH TTSH is online now
Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Dec 2013
Location: MA
Posts: 5,429
Likes: 9,850
Liked 5,378 Times in 2,738 Posts
Default

Quote:
Originally Posted by Kollector03 View Post
cylinder serial matches, so its original.
Well, so much for my speculation. Deepens the mystery even further. In all my long sorry years, I've not seen that happen to a revolver.
Reply With Quote
  #26  
Old 04-19-2018, 05:38 AM
bananaman's Avatar
bananaman bananaman is offline
Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Sep 2009
Location: Toledo, Ohio
Posts: 5,742
Likes: 3,678
Liked 3,704 Times in 1,837 Posts
Default

I wouldn't mind having 1 like it! A "shooter" of course. The grips/ stocks are not to my liking (doesn't matter). I have a 6" 28 no dash from 1960. Congratulations on your trade. Bob
Attached Thumbnails
1954 Pre-28 Highway Patrolman-28-0-004-jpg   1954 Pre-28 Highway Patrolman-28-0-008-jpg  
Reply With Quote
  #27  
Old 04-19-2018, 07:23 AM
6actual's Avatar
6actual 6actual is offline
US Veteran
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Nov 2011
Location: Stuart, Fla
Posts: 412
Likes: 807
Liked 441 Times in 183 Posts
Default

Not everything needs to be a barbecue pistol, working/field guns with personality and history have a lot of appeal to me and many others. I actually prefer shooter grade on pistols that have a job other than sitting in my safe
__________________
It is the Indian not the arrow
Reply With Quote
The Following User Likes This Post:
  #28  
Old 04-19-2018, 10:58 AM
Nightowl's Avatar
Nightowl Nightowl is offline
SWCA Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Apr 2004
Location: Warrensburg, MO USA
Posts: 3,989
Likes: 750
Liked 1,368 Times in 808 Posts
Default

I have an old 6 1/2 .357 Magnum made in that era that has a similar looking cylinder. The rest of the gun looks different, but it is not as faded as this one here. The action feels like it has never been used!

I used to think it had been refinished, but it shows no tell tale signs, so I guess it was something in the bluing process, steel mix or something that went wrong. I'm using it as is. :-)
__________________
Richard Gillespie
Reply With Quote
  #29  
Old 04-19-2018, 12:34 PM
Kollector03 Kollector03 is offline
Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Feb 2013
Location: Minnesota
Posts: 27
Likes: 6
Liked 39 Times in 9 Posts
Default

Quote:
Originally Posted by TTSH View Post
Well, so much for my speculation. Deepens the mystery even further. In all my long sorry years, I've not seen that happen to a revolver.
i think the cylinder got worn by an ill fitting holster with a very abrasive lining.
Reply With Quote
  #30  
Old 04-19-2018, 12:36 PM
Kollector03 Kollector03 is offline
Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Feb 2013
Location: Minnesota
Posts: 27
Likes: 6
Liked 39 Times in 9 Posts
Default

Quote:
Originally Posted by bananaman View Post
I wouldn't mind having 1 like it! A "shooter" of course. The grips/ stocks are not to my liking (doesn't matter). I have a 6" 28 no dash from 1960. Congratulations on your trade. Bob
the grips are going for sure. i think i may warm up to it with some different stocks on it,
Reply With Quote
  #31  
Old 04-19-2018, 03:39 PM
DWalt's Avatar
DWalt DWalt is offline
Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Dec 2009
Location: South Texas
Posts: 21,639
Likes: 2
Liked 12,411 Times in 6,997 Posts
Default

Don't throw the Franzite grips away. They were fairly popular in the 1950s-60s and some still like them, especially N-frames. You might get $20-$25 if you list them on eBay.
Reply With Quote
The Following User Likes This Post:
  #32  
Old 04-19-2018, 04:48 PM
bananaman's Avatar
bananaman bananaman is offline
Member
1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman 1954 Pre-28 Highway Patrolman  
Join Date: Sep 2009
Location: Toledo, Ohio
Posts: 5,742
Likes: 3,678
Liked 3,704 Times in 1,837 Posts
Default

Quote:
Originally Posted by Kollector03 View Post
the grips are going for sure. i think i may warm up to it with some different stocks on it,
You are right about different stocks changing attitude.
These stocks were on my no dash for years. They feel great to me. Bob
Attached Thumbnails
1954 Pre-28 Highway Patrolman-six-inch-028-jpg   1954 Pre-28 Highway Patrolman-six-inch-033-jpg  
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
WTS/WTT Various Firearms Kollector03 GUNS - For Sale or Trade 0 04-16-2018 09:02 PM
1954 Highway Patrolman GA 1911 S&W Hand Ejectors: 1896 to 1961 36 03-26-2018 10:22 PM
A 1954 Highway Patrolman for only $85! 357magster S&W Hand Ejectors: 1896 to 1961 16 09-23-2016 10:51 PM
1954 Highway Patrolman C-bus S&W Hand Ejectors: 1896 to 1961 16 05-30-2014 08:11 PM
1954 Highway Patrolman Value? blujax01 S&W Hand Ejectors: 1896 to 1961 26 03-21-2014 06:02 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 01:17 PM.


© S-W Forum, LLC 2000-2015
Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)