|
|
|
06-12-2018, 06:12 PM
|
|
US Veteran
|
|
|
Join Date: Feb 2017
Location: Missouri
Posts: 2,929
Likes: 3,902
Liked 6,802 Times in 1,851 Posts
|
|
Triple lock resque-update
I'm not sure why I even did this, soft spot in my heart or my head? Just bought a old and tired triple lock on GB. It was sort of mislisted as a 1926 model in the main description. Poor old thing has seen many a hard mile. I couldn't even tell if it left the factory as a nickel finish or not. If ever I've seen a triple lock that needed a full restoration this may be it. I'll probably have it lettered before I make any decisions on how to proceed with it. Now guys don't cringe to much when you look at the pictures.
https://www.gunbroker.com/Item/773443939
Last edited by andy52; 06-16-2018 at 12:38 PM.
|
The Following 32 Users Like Post:
|
6518John, bmcgilvray, cgt4570, DGT, ditrina, eb07, Green Frog, Hondo44, Hunter Keith, ki5mc, LEO918, Mike Q., moosedog, mtgianni, Muley Gil, M_conrad_0311, NovaJoe, P.W.Herman, quinn, RobertJ., S&W Oldtimer, S&WsRsweet, S42N8, series guy, Shark Bait, shouldazagged, Skysoldier, snowman.45, Thinnes, usmc2427765, vonn, Wiregrassguy |
06-12-2018, 06:27 PM
|
|
US Veteran
|
|
|
Join Date: Oct 2013
Location: Central Montana
Posts: 13,718
Likes: 12,858
Liked 39,483 Times in 10,050 Posts
|
|
Ya, it looks like it was rode hard and put away wet. But, if it still functions ok it will probably shoot fine. I don't think it was redone, hammer, trigger and cam plate all case hardened. Led a life already, but still a triple lock and a cool gun to have if the price was right.
|
The Following 4 Users Like Post:
|
|
06-12-2018, 06:30 PM
|
SWCA Member
|
|
|
Join Date: Mar 2011
Posts: 3,842
Likes: 3,260
Liked 7,111 Times in 1,896 Posts
|
|
I don't think this is too bad...depending on what you have in it. If you don't mind me asking, what do you have in it as this determined if you did well or not. Clearly buffed and renickeled, but it does have an original 5" barrel, which is uncommon. I know the barrel has not been cut as the markings on the barrel reflect a true 5" barrel and not one shortened from 6 1/2".
I would get a proper set of N frame grips with medallions that reflect the condition of this gun. Should cost you (well) under $100. I did this to one I own almost identical to yours except with an original 4" barrel and it greatly improved the appearance. Given that you cannot harm mine, and this is the case with yours, and mine has a short(er) barrel, this is my concealed carry piece.
|
The Following 3 Users Like Post:
|
|
06-12-2018, 06:32 PM
|
|
US Veteran
|
|
|
Join Date: Feb 2017
Location: Missouri
Posts: 2,929
Likes: 3,902
Liked 6,802 Times in 1,851 Posts
|
|
Quote:
Originally Posted by steelslaver
Ya, it looks like it was rode hard and put away wet. But, if it still functions ok it will probably shoot fine. I don't think it was redone, hammer, trigger and cam plate all case hardened. Led a life already, but still a triple lock and a cool gun to have if the price was right.
|
Yes it's still a triple lock and best I can tell it dates to about 1911. The price was just about what I could get if I sold it for parts at just a little over 700, but really I'm thinking about bringing it back from the dead.
|
The Following 4 Users Like Post:
|
|
06-12-2018, 06:34 PM
|
SWCA Member
|
|
|
Join Date: Mar 2011
Posts: 3,842
Likes: 3,260
Liked 7,111 Times in 1,896 Posts
|
|
Similar Triple Lock with original 4" barrel
And here is mine...for comparison.
|
The Following 14 Users Like Post:
|
andy52, Hunter Keith, Jack Flash, ki5mc, LEO918, Old Corp, S&WsRsweet, series guy, shouldazagged, snowman.45, Thinnes, TripleLock, vonn, Wiregrassguy |
06-12-2018, 06:38 PM
|
|
US Veteran
|
|
|
Join Date: Feb 2017
Location: Missouri
Posts: 2,929
Likes: 3,902
Liked 6,802 Times in 1,851 Posts
|
|
Quote:
Originally Posted by mrcvs
And here is mine...for comparison.
|
your's is just slightly better then the one I just bought, but as it has been said it's still a triple lock.
|
The Following User Likes This Post:
|
|
06-12-2018, 06:40 PM
|
SWCA Member
|
|
|
Join Date: Mar 2011
Posts: 3,842
Likes: 3,260
Liked 7,111 Times in 1,896 Posts
|
|
Quote:
Originally Posted by andy52
The price was just about what I could get if I sold it for parts at just a little over 700...
|
That's a reasonable price for what yours is, and about what mine ran me a few years ago. Also, I saw a similar one sell in this range at an auction in March, but that one had a standard 6 1/2" barrel.
|
The Following User Likes This Post:
|
|
06-12-2018, 06:57 PM
|
Member
|
|
|
Join Date: Dec 2008
Location: Northern California
Posts: 6,660
Likes: 3,307
Liked 17,199 Times in 2,910 Posts
|
|
I really like this gun as is, except I’d slap some sambar stags on it I have. I’d love to encounter something like that locally.
|
The Following 5 Users Like Post:
|
|
06-12-2018, 07:00 PM
|
Member
|
|
|
Join Date: Mar 2015
Posts: 3,183
Likes: 9,014
Liked 9,908 Times in 2,006 Posts
|
|
Nice save. That could be a fun project gun.
|
The Following 3 Users Like Post:
|
|
06-12-2018, 07:03 PM
|
|
Member
|
|
|
Join Date: Apr 2011
Location: Twin Cites, Minnesota
Posts: 5,154
Likes: 10,997
Liked 10,886 Times in 3,282 Posts
|
|
I wouldn't touch it; it's perfect the way it is.
|
The Following 6 Users Like Post:
|
|
06-12-2018, 07:23 PM
|
|
US Veteran
|
|
|
Join Date: Feb 2017
Location: Missouri
Posts: 2,929
Likes: 3,902
Liked 6,802 Times in 1,851 Posts
|
|
Quote:
Originally Posted by Shark Bait
Nice save. That could be a fun project gun.
|
This would be the soft place in my heart, if the gun letters to 1911 that would be the birth year of my grandmother, if a letter confirms that I'll send it to Fords for a full restoration and it will have a place of honor in my home. The trigger and hammer might have to go to Turnbulls because I don't think Fords does case hardening.
Last edited by andy52; 06-12-2018 at 07:24 PM.
|
The Following 3 Users Like Post:
|
|
06-12-2018, 07:33 PM
|
SWCA Member
|
|
|
Join Date: Jul 2017
Location: Iowa
Posts: 450
Likes: 9,950
Liked 1,718 Times in 247 Posts
|
|
Andy I want you to feel very bad and guilty about outbidding me on this gun.Shame on you
Nah, just kidding. But I was the under bidder. Well done on your part. Glad it went to a good home. My grail gun remains a TL.
__________________
Illegitimi non carborundum
|
The Following 6 Users Like Post:
|
|
06-12-2018, 08:30 PM
|
|
US Veteran
|
|
|
Join Date: Apr 2003
Location: East of Stick Marsh, Fla.
Posts: 9,565
Likes: 5,011
Liked 21,365 Times in 6,449 Posts
|
|
One day at the local gun shop they were talking about this old Smith they'd gotten in in a box sale from an estate. They thought it was a Triple Lock, as soon as I saw it I took it from the gunsmith. Turned it over and realized it was a Colt. Then I realized it was in .45 Colt and then read the butt and saw it was a Model 1909 U.S.Army. Needless to say I did not let go of it. Was disappointed it was not a Triple Lock, but not by much.
By the way I'd have bought that TL too. Congrats and good luck. Let us know what the letter says.
__________________
USMC 69-93 Combat Pistol Inst.
|
The Following 2 Users Like Post:
|
|
06-12-2018, 08:36 PM
|
|
Moderator
|
|
|
Join Date: Jun 2007
Posts: 26,910
Likes: 991
Liked 19,039 Times in 9,314 Posts
|
|
I'd give a thorough cleaning/lubrication internally, control any rust/nastiness on the finish, wax and then take it to the range before deciding on any further work. You may find you like it "as is". Enjoy!
__________________
Alan
SWCA LM 2023, SWHF 220
|
The Following 6 Users Like Post:
|
|
06-12-2018, 09:05 PM
|
|
SWCA Member
|
|
|
Join Date: May 2005
Location: Michigan
Posts: 9,320
Likes: 34,027
Liked 10,993 Times in 3,961 Posts
|
|
When nickel looks bad, it really looks bad. Normally, I am against refinishing such an old revolver, but I can see why you want to. As a first step, you should replace the plastic faux stag stocks. That alone will improve its appearance a lot.
The seller did misidentify it as a Model 1926, but at least he did know it's a TL (as he clearly states in the description). So he sold it knowing (more or less) what it is. You got a good buy.
__________________
You're shy a few manners.
|
The Following 3 Users Like Post:
|
|
06-12-2018, 09:15 PM
|
|
SWCA Member
|
|
|
Join Date: Jun 2000
Location: Massachusetts USA
Posts: 9,596
Likes: 3,711
Liked 8,951 Times in 3,558 Posts
|
|
I agree. Give it a good cleaning and then a coat of wax. There are safe queens and then there are guns that have been there and done that. I like the gun just the way it is and "pretty" will probably not make it shoot any better.
In my book any N frame S&W that is not a boat anchor is already worth $500 IMHO, add the fact that it's a triple lock and $755 is not a bad price. If it turns out that it was once owned by someone special then it's a bargain.
__________________
James Redfield
LM #497
|
The Following 3 Users Like Post:
|
|
06-12-2018, 09:41 PM
|
|
Member
|
|
|
Join Date: Apr 2011
Location: Twin Cites, Minnesota
Posts: 5,154
Likes: 10,997
Liked 10,886 Times in 3,282 Posts
|
|
It is a shame when people get an old gun like this and then try to turn it into a fishing lure. No old gun that is in unmolested condition should be refinished. JMHO.
|
The Following User Likes This Post:
|
|
06-12-2018, 09:47 PM
|
SWCA Member
|
|
|
Join Date: Apr 2011
Location: Northern Middle Tennessee
Posts: 2,915
Likes: 3,428
Liked 4,120 Times in 1,462 Posts
|
|
I don't think it has been refinished. A day or two of cleaning then polishing with Flitz or Mothers Mag will do wonders for that one . I would not refinish that one.
Last edited by merl67; 06-12-2018 at 10:34 PM.
|
The Following User Likes This Post:
|
|
06-12-2018, 10:04 PM
|
US Veteran
|
|
|
Join Date: Feb 2005
Location: The SW Va Blue Ridge
Posts: 17,546
Likes: 89,884
Liked 24,937 Times in 8,536 Posts
|
|
Nice old TL.
Looking at the side plate fit, I would say it has been refinished.
andy52, look inside of the barrel shroud at the serial number. If there is a "B" prefix to the SN, it shipped from the factory with a blue finish.
__________________
John 3:16
WAR EAGLE!
|
The Following 2 Users Like Post:
|
|
06-12-2018, 10:21 PM
|
|
Member
|
|
|
Join Date: Feb 2010
Location: Northeast Alabama
Posts: 1,273
Likes: 2,812
Liked 1,926 Times in 710 Posts
|
|
It is just me, but after a trip to the range and confirming that all interior was ok and not only functioning properly with good or great accuracy, this old gal would go off to Fords in Crystal River for a refinish. I love the restored to new look on these old guns, way better than leaving it "as is". I think, I am holding a gun in my hand that looked like this 100 years ago. I love the restorer look sometimes
|
The Following User Likes This Post:
|
|
06-12-2018, 10:22 PM
|
|
Member
|
|
|
Join Date: Feb 2011
Location: PRNJ
Posts: 6,747
Likes: 477
Liked 16,754 Times in 3,311 Posts
|
|
Unlike Registered Magnums, Triple Locks seem to be available in a wide range of condition, with prices to match.
This circumstance makes a Triple Lock accessible to many, who like me, do not see a Registered Magnum in either their safe or their future.
__________________
Buy American
Vote Responsibly
|
The Following 5 Users Like Post:
|
|
06-12-2018, 10:53 PM
|
SWCA Member
|
|
|
Join Date: Apr 2015
Location: Texas
Posts: 1,311
Likes: 1,638
Liked 3,802 Times in 881 Posts
|
|
Nice save! I saw that one on GB and almost started bidding myself.
__________________
Life NRA, Life TSRA, C&R FFL
|
The Following User Likes This Post:
|
|
06-12-2018, 11:03 PM
|
Banned
|
|
|
Join Date: May 2007
Location: Montana
Posts: 2,142
Likes: 2,064
Liked 3,137 Times in 644 Posts
|
|
If that had been original blue it would just be a brown gun. I don't think its been refinished, I'll bet when cleaned inside that sideplate will sit flush. I don't see other indications(?)
Grips are difficult to find, and expensive.
I'd think twice before sending it to Fords, what they did to a Colt once posted here would keep me from EVER sending anything to them. A righteous hand-polish and professional rust blue could make it a very nice revolver.
I don't think you got hurt too badly, and i'm normally the skeptic.
|
The Following 2 Users Like Post:
|
|
06-12-2018, 11:26 PM
|
Absent Comrade
|
|
|
Join Date: Feb 2013
Location: Louisville, KY, USA
Posts: 19,336
Likes: 53,737
Liked 38,387 Times in 11,802 Posts
|
|
That's a clear case of Stage 3 character, and I love it.
I'd clean it up and say, "Old buddy, you've come home. Let's go shooting and swap some yarns."
__________________
Oh well, what the hell.
|
The Following User Likes This Post:
|
|
06-12-2018, 11:45 PM
|
Member
|
|
|
Join Date: May 2010
Location: The Steel City
Posts: 2,158
Likes: 6,838
Liked 4,405 Times in 1,409 Posts
|
|
I think you may have misread the definition of "rode hard and put away wet". Mine is # 8221 from 1913 and shoots great. Actually 105 years old last Sunday.
Last edited by series guy; 06-12-2018 at 11:49 PM.
|
The Following 12 Users Like Post:
|
andy52, Hunter Keith, Jack Flash, LEO918, Muley Gil, shouldazagged, The Gila Bender, Thinnes, TripleLock, usmc2427765, vonn, Wiregrassguy |
06-12-2018, 11:52 PM
|
|
Member
|
|
|
Join Date: Mar 2008
Posts: 5,543
Likes: 667
Liked 6,774 Times in 1,312 Posts
|
|
I had one like that once, mine was made in 1917 according to when I had it lettered. It had a bit of endshake, but it shot decently and I kept the loads mild. I had thought about having it redone, but I decided to leave it be. It was .44 Special. I hated to sell it but when the bills come due I had to part with it, and a few others I wish I still had.
__________________
Vaya con Dios
|
The Following 16 Users Like Post:
|
andy52, Hunter Keith, Jack Flash, ki5mc, LEO918, mtgianni, Muley Gil, series guy, shouldazagged, snowman.45, Thinnes, TripleLock, usmc2427765, vonn, Wiregrassguy, Wyatt Burp |
06-13-2018, 02:11 AM
|
|
SWCA Member Absent Comrade
|
|
|
Join Date: Aug 2015
Location: Foothills (Phoenix), AZ
Posts: 624
Likes: 256
Liked 1,229 Times in 338 Posts
|
|
Quote:
Originally Posted by andy52
.....I'll send it to Fords for a full restoration and it will have a place of honor in my home. The trigger and hammer might have to go to Turnbulls because I don't think Fords does case hardening.
|
Ford's does a case color, of sorts, I had a trigger done by them recently. Were I you, I would defer and have it done elsewhere. You can do a very good job of it yourself with Oxpho-blue cream, a Q-Tip and some practice.
__________________
Jeb
Last edited by jebstuart; 06-13-2018 at 10:04 AM.
|
The Following 3 Users Like Post:
|
|
06-13-2018, 06:57 AM
|
SWCA Member
|
|
|
Join Date: Mar 2011
Posts: 3,842
Likes: 3,260
Liked 7,111 Times in 1,896 Posts
|
|
Refinished vs not?
Obviously, as others have suggested, if there's a B within the shroud, this Triple Lock was originally blued, so this would be a later renickel. If an N is present, then not so easy.
That which suggests original finish:
Middle lock insert in frame not renickeled. Often this is missed when refinishing (e.g., bluing or nickel inaccurately applied to this piece.
Most markings fairly crisp.
Side plate appears to generally fit well, although seam more evident than I would expect, but this could just be pattern of wear.
Where screws are located, no dishing beneath heads.
No obvious rounded edges.
That which suggests refinish:
Reference to side plate, perhaps not from pattern of wear but from refinish.
On side plate the word "TRADE" appears to be exceptionally weak and seems to contain nickel. Suggests buffing and renickeling.
All markings on side plate appear weaker than expected. Could be wear, an optical illusion, or evidence of refinish.
Wear pattern to nickel finish more typical of refinish and wear vs wear to original pattern. This is, by no means, foolproof. I don't know how to explain it, but, in my experience, renickeled guns wear differently from wear pattern exhibited by original nickel finish.
Left side of trigger appears to contain nickel. This would not be historically correct. Right side does not; could be just an optical illusion.
It would be much easier to determine if I had the gun in hand, but I believe that this one is not refinished as most discrepancies are likely explained By photographic technique or optical illusion.
Last edited by mrcvs; 06-13-2018 at 07:01 AM.
|
The Following 3 Users Like Post:
|
|
06-13-2018, 07:15 AM
|
|
US Veteran
|
|
|
Join Date: Oct 2013
Location: Central Montana
Posts: 13,718
Likes: 12,858
Liked 39,483 Times in 10,050 Posts
|
|
It looks to me like the side plate is not completely seated for some reason.
Refinish? Either go for the whole meal deal or leave it alone, but ditch the plastic grips. If your going to use it as a wall hanger of times gone by, clean it up well wax it, stick some better grips on it and let it talk.
|
The Following 2 Users Like Post:
|
|
06-13-2018, 07:18 AM
|
Member
|
|
|
Join Date: Apr 2009
Location: East Central Florida
Posts: 1,933
Likes: 4,769
Liked 4,283 Times in 1,196 Posts
|
|
It's a keeper...just as it is
It's a nice, fully-functional early Triplelock...one that many of us would love to own and shoot. She may not be the purtiest girl at the dance, but I'll bet she'll show you a good time! As a majority of the Forum members have recommended, first give it a good cleaning and polish and see how she turns out. If you decide that you are still unhappy with it, you have a couple of choices- you could sell it to one of us, or send it out for a re-finish. It's your revolver and your decision, but I'll bet that you give it a good polishing and you'll keep it.
|
The Following 2 Users Like Post:
|
|
06-13-2018, 07:34 AM
|
SWCA Member
|
|
|
Join Date: Mar 2011
Posts: 3,842
Likes: 3,260
Liked 7,111 Times in 1,896 Posts
|
|
I would suggest that until you have determined without a shadow of doubt that this has already been refinished before, that you refrain from refinishing again. If previously refinished, another refinish can do no further harm. However, if this is the original finish--my opinion is that a revolver even with little original finish is ALWAYS preferable to a refinish.
|
The Following 3 Users Like Post:
|
|
06-13-2018, 07:39 AM
|
|
US Veteran
|
|
|
Join Date: Apr 2003
Location: East of Stick Marsh, Fla.
Posts: 9,565
Likes: 5,011
Liked 21,365 Times in 6,449 Posts
|
|
Quote:
Originally Posted by mrcvs
I would suggest that until you have determined without a shadow of doubt that this has already been refinished before, that you refrain from refinishing again. If previously refinished, another refinish can do no further harm. However, if this is the original finish--my opinion is that a revolver even with little original finish is ALWAYS preferable to a refinish.
|
Bottom line is refinish or not is up to the owner. Only ever had one gun I thought seriously about refinishing. A Colt SAA made in 1878, it was toasted. In the end it was going to cost about $6K from Turnbull. I could not afford that so I sold it to someone who could.
__________________
USMC 69-93 Combat Pistol Inst.
|
The Following 2 Users Like Post:
|
|
06-13-2018, 09:22 AM
|
|
SWCA Member
|
|
|
Join Date: Aug 2010
Location: Death Valley, AZ
Posts: 2,813
Likes: 14,041
Liked 9,015 Times in 1,404 Posts
|
|
Here's #6971, a recent rescue of mine...
__________________
Living a dream - S&WCA #2364
|
The Following 13 Users Like Post:
|
andy52, delta-419, dr. mordo, Hugh WW, Jack Flash, ki5mc, M. Hutchinson, Muley Gil, series guy, snowman.45, Thinnes, TripleLock, Wiregrassguy |
06-13-2018, 10:51 AM
|
SWCA Member
|
|
|
Join Date: Dec 2006
Location: NW Florida
Posts: 2,243
Likes: 6,360
Liked 3,414 Times in 583 Posts
|
|
Triple Locks
That one was on my GB watch list, really glad it was won by a Forum Member. I don't think it has been refinished, the cylinder stop stud does not look polished. Usually a dead "give away" to over polishing for a refinish. It looks as factory installed. As said, look in the barrel shroud for an N or B or no letter at all. No letter is a sign that it left the factory as nickel. I now have a number of TLs and I shoot "cowboy" loads with lead bullets in all of my old timers. Google, Georgia Arms for ammo. You will enjoy the way she shoots.
|
The Following 3 Users Like Post:
|
|
06-13-2018, 11:28 AM
|
|
US Veteran
|
|
|
Join Date: Feb 2017
Location: Missouri
Posts: 2,929
Likes: 3,902
Liked 6,802 Times in 1,851 Posts
|
|
Quote:
Originally Posted by Thinnes
Andy I want you to feel very bad and guilty about outbidding me on this gun.Shame on you
Nah, just kidding. But I was the under bidder. Well done on your part. Glad it went to a good home. My grail gun remains a TL.
|
If you had bid above 775 I would have folded I couldn't have justified much more than that.
|
The Following 2 Users Like Post:
|
|
06-13-2018, 11:35 AM
|
|
US Veteran
|
|
|
Join Date: Feb 2017
Location: Missouri
Posts: 2,929
Likes: 3,902
Liked 6,802 Times in 1,851 Posts
|
|
Just as soon as I get the TL I'll give it some serious TLC and take some pictures for all to see. The grips definitely have to go so I'll start looking for some while I wait.
|
The Following User Likes This Post:
|
|
06-13-2018, 11:40 AM
|
|
US Veteran
|
|
|
Join Date: Feb 2017
Location: Missouri
Posts: 2,929
Likes: 3,902
Liked 6,802 Times in 1,851 Posts
|
|
Quote:
Originally Posted by AJ
Bottom line is refinish or not is up to the owner. Only ever had one gun I thought seriously about refinishing. A Colt SAA made in 1878, it was toasted. In the end it was going to cost about $6K from Turnbull. I could not afford that so I sold it to someone who could.
|
There's no way I would spend 6k to have this TL restored, I might go a additional 1000 to 1200 if I even decide to do it.
If the job were done right I'd still only have 1755 or so invested
which would be acceptable.
|
The Following 2 Users Like Post:
|
|
06-13-2018, 11:57 AM
|
Member
|
|
|
Join Date: Feb 2007
Location: SW MT
Posts: 6,738
Likes: 10,516
Liked 6,034 Times in 2,972 Posts
|
|
Get a good fitting pair of worn grips and scratch E. Keith on it and you are good to go. Seriously, it is a great gun that I hope shoots well for you.
__________________
Front sight and squeeze
|
The Following 4 Users Like Post:
|
|
06-13-2018, 12:15 PM
|
Member
|
|
|
Join Date: Sep 2009
Location: Georgia
Posts: 2,685
Likes: 2,473
Liked 5,898 Times in 1,224 Posts
|
|
I was in that that auction for a minute as well until my TL got jealous & accused me of cheating on her..... I backed off to keep her happy.
Glad you got it!!! Enjoy!!
Another vote to leave it "as is" and spend the money on ammo and a LETTER!!!
Last edited by policerevolvercollector; 06-13-2018 at 12:16 PM.
|
The Following 9 Users Like Post:
|
|
06-13-2018, 01:30 PM
|
Member
|
|
|
Join Date: Jul 2010
Location: Central VA
Posts: 8,660
Likes: 1,571
Liked 9,429 Times in 4,226 Posts
|
|
Nice snag! If it were mine, I’d find the most hand-worn set of stags I could get and while I was waiting for them I would give the gun a real good rub down with Flitz or Mother’s Mag Polish and call it good. If the end shake were a problem, stainless shims are available from Brownell’s.
If I just absolutely couldn’t stand it in the cosmetic condition it’s in, I’d probably commit a total sacrilege and upgrade it to a target model while refinishing it, maybe a King’s Target conversion if I could find the proper parts.
Froggie
|
The Following 2 Users Like Post:
|
|
06-13-2018, 01:45 PM
|
|
US Veteran
|
|
|
Join Date: Mar 2011
Location: Indiana
Posts: 196
Likes: 624
Liked 769 Times in 137 Posts
|
|
I was also looking at that one but have over indulged lately so I let it pass. I'd give it a good cleaning, change the grips, and let it be what it is. My .02
|
The Following 2 Users Like Post:
|
|
06-13-2018, 01:52 PM
|
Member
|
|
|
Join Date: Sep 2004
Location: Wyoming
Posts: 3,259
Likes: 1,224
Liked 2,526 Times in 1,043 Posts
|
|
I paid too much for a 4" TL from a well known auction site some years back. Exterior was not too bad but mechanically it was too far gone and bore was bad. "Buyer beware" is no joke...
A very talented friend of mine offered to hand polish and blue the gun as closely to original as possible and did an amazing job. So now I have a nice 4" non-shooting display TL, rescued from the scrap heap. It IS very pretty.
But I sure am snakebit when it comes to auctions! Never again.
|
The Following 2 Users Like Post:
|
|
06-13-2018, 10:32 PM
|
|
Member
|
|
|
Join Date: Feb 2011
Location: PRNJ
Posts: 6,747
Likes: 477
Liked 16,754 Times in 3,311 Posts
|
|
Quote:
It's your revolver and your decision,
|
First World Problem
__________________
Buy American
Vote Responsibly
|
The Following User Likes This Post:
|
|
06-16-2018, 12:51 PM
|
|
US Veteran
|
|
|
Join Date: Feb 2017
Location: Missouri
Posts: 2,929
Likes: 3,902
Liked 6,802 Times in 1,851 Posts
|
|
Picked up the TL today it's extremely dirty so next it gets a good cleaning. The best I can tell it hasn't been refinished there's no B stamped on it anywhere. The roll marks are pretty clear considering it's age and condition. Here's a few pics and the last one is rather interesting. While inspecting the gun I noticed some additional stamps on the butt right below the serial number, it appears to be ODIN ALEX VA. what that means I have no idea.
|
The Following 7 Users Like Post:
|
|
06-16-2018, 01:11 PM
|
SWCA Member
|
|
|
Join Date: Dec 2006
Location: NW Florida
Posts: 2,243
Likes: 6,360
Liked 3,414 Times in 583 Posts
|
|
ODIN Stamp
Could it be an import stamp? Sure looks like!
|
The Following User Likes This Post:
|
|
06-16-2018, 01:41 PM
|
|
SWCA Member Absent Comrade
|
|
|
Join Date: Aug 2015
Location: Foothills (Phoenix), AZ
Posts: 624
Likes: 256
Liked 1,229 Times in 338 Posts
|
|
Quote:
Originally Posted by andy52
While inspecting the gun I noticed some additional stamps on the butt right below the serial number, it appears to be ODIN ALEX VA. what that means I have no idea.
|
Odin was/is a firearms importer in Alexandria, VA, not unlike Interarms (also in Alexandria). I know they were there as late as the very early 80's. I worked in D.C. and stopped by both spots periodically to dig through stuff. It was usually pretty tough going - much rust and arsenal wood repair, but a gem could be found sometimes.
But now then, that implies that your TL left the U.S. at some point and imported back. You may assume that the country from which it was imported back, did not require proof, if you see no proof mark's. British, Canadian, Australian (all likely places) would have required a pass through a proof house. I would be thinking about a letter now.
__________________
Jeb
Last edited by jebstuart; 06-16-2018 at 01:45 PM.
|
The Following User Likes This Post:
|
|
06-16-2018, 01:42 PM
|
|
US Veteran
|
|
|
Join Date: Feb 2017
Location: Missouri
Posts: 2,929
Likes: 3,902
Liked 6,802 Times in 1,851 Posts
|
|
Quote:
Originally Posted by delta-419
Could it be an import stamp? Sure looks like!
|
I think you are correct, I just did some research on Odin Alex VA. There were importers of mainly Mexican guns confiscated in the 70s gun ban down there. Now I really know I have to have this TL lettered to see where it was shipped to. I suppose it could have crossed the border back in the day or maybe some cowboy sold it for "whatever" hint, hint in a border town.
|
The Following User Likes This Post:
|
|
06-16-2018, 01:54 PM
|
|
SWCA Member Absent Comrade
|
|
|
Join Date: Aug 2015
Location: Foothills (Phoenix), AZ
Posts: 624
Likes: 256
Liked 1,229 Times in 338 Posts
|
|
Quote:
Originally Posted by andy52
I think you are correct, I just did some research on Odin Alex VA. There were importers of mainly Mexican guns confiscated in the 70s gun ban down there. Now I really know I have to have this TL lettered to see where it was shipped to. I suppose it could have crossed the border back in the day or maybe some cowboy sold it for "whatever" hint, hint in a border town.
|
That makes sense to me, and explains the lack of proof marks. Having lived in a boarder state for almost 30 years, I have, at times, conducted a stiff trade with Mexico myself.
__________________
Jeb
Last edited by jebstuart; 06-16-2018 at 02:00 PM.
|
The Following User Likes This Post:
|
|
06-16-2018, 02:15 PM
|
Banned
|
|
|
Join Date: May 2007
Location: Montana
Posts: 2,142
Likes: 2,064
Liked 3,137 Times in 644 Posts
|
|
I don't think I would do a thing to that revolver except clean it. Old is old, original is original and character comes from both together. A letter could be enlightening, maybe??
|
The Following 3 Users Like Post:
|
|
06-16-2018, 02:43 PM
|
SWCA Member
|
|
|
Join Date: Mar 2011
Posts: 3,842
Likes: 3,260
Liked 7,111 Times in 1,896 Posts
|
|
Quote:
Originally Posted by SDH
I don't think I would do a thing to that revolver except clean it. Old is old, original is original and character comes from both together. A letter could be enlightening, maybe??
|
Agreed! I am fairly certain this one is not refinished, and it looks like the nickel should on a well used specimen. The "TRADE" as located on the sideplate appears a little weak, but all other markings, especially the barrel markings, are quite crisp. So I suggest that the "TRADE" might be a little weak compared to other examples, but not because of previous polishing and refinishing.
Clean it and apply Renaissance wax. That's it! Because this has an unusual and original 5" barrel, it should be left as is, original. Of course, this would be the case if this had a standard barrel length, but the case for maintaining originality is enhanced due to the scarcity of Triple Lock revolvers with original 5" barrels.
Please post your letter once received.
|
The Following 3 Users Like Post:
|
|
|
|
Posting Rules
|
|
|
|
|