Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Revolvers > S&W Hand Ejectors: 1896 to 1961
o

Notices

S&W Hand Ejectors: 1896 to 1961 All 5-Screw & Vintage 4-Screw SWING-OUT Cylinder REVOLVERS, and the 35 Autos and 32 Autos


Reply
 
Thread Tools Display Modes
  #1  
Old 09-08-2009, 01:48 PM
SWBigBang SWBigBang is offline
Member
Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel?  
Join Date: Aug 2009
Location: Central Florida
Posts: 331
Likes: 0
Liked 14 Times in 8 Posts
Default Model 29 6 1/2 inch or 8 3/8 inch barrel?

I have been looking mostly at the traditional Clint East style Model 29 with the 6 1/2 barrel but have been noticing some very sharp looking ones with the 8 3/8 inch barrel with very attractive prices to match and finding it hard to decide which to choose.

Unless someone is going to offer a two for one sale I am going to have to choose only one and a very big gun show is coming to town in two weeks.

What are the pros/cons between the 6 1/2 inch barrel compared to the 8 3/8 inch barrel?

I am seeing the 8 3/8 barreled 29s going for a bit less than the 6 1/2 so am assuming the 6 1/2 is more desirable amount collectors.

This item would only be used sparingly with mild magnum loads mostly at distances of 10-50 yards max (maybe 100 yards on very rare occasions).
Reply With Quote
  #2  
Old 09-08-2009, 02:14 PM
DCWilson's Avatar
DCWilson DCWilson is offline
SWCA Member
Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel?  
Join Date: Dec 2007
Location: Orange County, CA
Posts: 13,993
Likes: 4,998
Liked 7,681 Times in 2,618 Posts
Default

In general, more shooters like the 6 1/2 inch barrel on these big guns, and that was the original length for the first .44 magnum; it was also the standard length for the postwar N-frames of any caliber. The 8 3/8 models were eventually offered because there was a market for them among hunters and long range target shooters in the late '50s/early '60s. I happen to think long tubes are extremely cool, but I acknowledge they make for a big and ungainly gun. I have both a Pre-27 and a Model 57 no dash with the long barrels and love them both. But if I were going to pick up an early .44 Magnum, I think I would go for the 6 1/2 inch barrel.

And don't forget there are some four-inch barrels to be found among the early .44 Magnums, though they are uncommon. A lot of .44 Magnum shooters will tell you that a four-inch barrel is all you need for accuracy at any reasonable distance.

Whichever one you get, you are bound to like it. But if you want to play it safe and pick one up that you could turn around quickly in a financial emergency, the 6 1/2 would be a little more marketable.

Two cents worth from me, and worth every penny you paid for it.
__________________
David Wilson
Reply With Quote
The Following User Likes This Post:
  #3  
Old 09-08-2009, 06:35 PM
M29since14 M29since14 is offline
SWCA Member
Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel?  
Join Date: Jul 2005
Location: Indiana
Posts: 11,907
Likes: 10,039
Liked 10,047 Times in 4,758 Posts
Default

Addressing the pros and cons, the obvious things that come to mind seem to work out just as one might expect. The 8-inch gun is awkward, to me. I have trouble shooting the guns as well as the shorter ones, probably a matter of forearm strength. The weight difference is not great, but at arms length, the extra ounces do seem to add up quickly.

If your vision is not the greatest, the extra distance between front and rear sight might not be helpful to you. It isn't for me.

The good thing is the 8-inch gun is by far the mildest of the three, in terms of recoil. I have never heard anyone complain much about the recoil of an 8-inch 29.

None of the drawbacks are pronounced, and the long guns are fun to toy around with. On the other hand, 6.5-inch guns are not hard to come by, and if that is what you really want, why not spend the few extra bucks and get the right one?

If you are buying a gun both to shoot and to "collect," the only ones I know of that are of any particular interest are the ones made shortly after the barrel length was first introduced. But remember, the long barrel attracted quite a bit of interest and some guns were rebarrelled, so buying an early one requires a little expertise to be sure you are buying an original gun, not one returned for service.
Reply With Quote
  #4  
Old 09-08-2009, 07:51 PM
SWBigBang SWBigBang is offline
Member
Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel?  
Join Date: Aug 2009
Location: Central Florida
Posts: 331
Likes: 0
Liked 14 Times in 8 Posts
Default

Thanks for some very insightful information.
Reply With Quote
  #5  
Old 09-08-2009, 07:52 PM
jrm53 jrm53 is offline
Member
Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel?  
Join Date: Feb 2009
Location: Rogers Arkansas
Posts: 1,864
Likes: 4,785
Liked 1,085 Times in 468 Posts
Default

I have both, a 629 with 6" barrel, and a blue 8 3/8" 29 I like the longer barrel better for the extra length between the sights. The first 29 I ever shot was a 6.5 length barrel and it was like baby bears bed it was " Just Right" Jeff
Reply With Quote
  #6  
Old 09-08-2009, 08:32 PM
Vulcan Bob's Avatar
Vulcan Bob Vulcan Bob is offline
Member
Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel?  
Join Date: Mar 2009
Location: central pa
Posts: 5,336
Likes: 2,745
Liked 2,492 Times in 1,182 Posts
Default

I would go with the 6 1/2 incher. The long tubes are cool but if you want to sell it down the road the shorter tube's will sell faster. I do have a 27-2 and a 57 in the 8 3/8 incher's, they shoot well but they are a bit akward to lug around!
__________________
Stay safe people!
Reply With Quote
  #7  
Old 09-09-2009, 12:16 AM
310Pilot 310Pilot is offline
Member
Model 29   6 1/2 inch or 8 3/8 inch barrel?  
Join Date: Mar 2008
Location: Arizona
Posts: 889
Likes: 57
Liked 340 Times in 164 Posts
Default

My 29-2 (1974 issue) had a 6/5" barrel. It was very well balanced, extremely accurate, and carried well, especially in a shoulder rig. I used to shoot it a lot, and it was very accurate to something over 100 yards (that will vary with the shooter). I really loved that gun, carried it for years - sadly, it was amongst a large number of guns stolen about 10-12 years ago, none of which was recovered. Overall, I would recommend the 6.5" barrel on a 29 (it is also, IMHO, the most aesthetically pleasing version of the 29). That being said, I bought an 8 3/8" 27-2 a year or two ago, and the longer barrel has really grown on me. Great accuracy, and pretty nice aesthetics. The only drawback is that it is a bit awkward to carry; however, I haven't really had any problems with it in a belt holster, and there is no real difference between handling the barrel lengths if you use a good shoulder rig. I still plan to buy a 6.5" 29-2 one of these days to fill the vacancy in my old one's presentation case; however, I am seriously thinking of getting one in 8 3/8", also. BTW, back in the '70s (when nobody, including dealers, could obtain 29s in any barrel length without an act of God), the most highly sought after (and rarest) barrel length was 8 3/8", even after Dirty Harry came out. Almost nobody wanted a 4" 29 back then, interesting how things change.
Reply With Quote
The Following User Likes This Post:
  #8  
Old 09-09-2009, 12:30 AM
GM4spd GM4spd is offline
Member
Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel?  
Join Date: Jun 2009
Location: SOCAL
Posts: 706
Likes: 192
Liked 841 Times in 210 Posts
Default

All good reasons for the 6-1/2" but when I shoot full house
loads,I prefer the longer barrel because it does dampen the
recoil. I like the longer sight radius and I think it looks great
but I don't carry it,either. I really like 44Magnum full house,factory ammo ACCURACY--it's tops for me. Pete


Last edited by GM4spd; 09-19-2009 at 05:06 PM.
Reply With Quote
  #9  
Old 09-09-2009, 08:33 AM
SWBigBang SWBigBang is offline
Member
Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel?  
Join Date: Aug 2009
Location: Central Florida
Posts: 331
Likes: 0
Liked 14 Times in 8 Posts
Default

Thanks again for all the good information.
Reply With Quote
  #10  
Old 09-09-2009, 09:10 AM
fyimo's Avatar
fyimo fyimo is offline
Member
Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel?  
Join Date: Jan 2009
Location: Arkansas
Posts: 18,773
Likes: 6,048
Liked 5,762 Times in 1,992 Posts
Talking

On Model 29's I have a 6.5 inch barrel and (2) with 6 inch barrels. I can talk about the longer tube because I have a 629 with 8 3/8 inch barrel which is the same gun in stainless. I also like long tube guns very much with the 8 3/8 inch barrel as I have a 27-2, 14-4, 17-4 in the 8 3/8 barrel length. On the model 29/629 I prefer the shorter barrel lengths of 6.5 or 6 inch better because I think they balance better in the hand and the 6.5 inch barrel still gives you a great sight radius and sight picture.
Reply With Quote
  #11  
Old 09-09-2009, 09:27 AM
29aholic 29aholic is offline
Banned
Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel?  
Join Date: Oct 2008
Location: Bolivar, MO
Posts: 6,360
Likes: 3,558
Liked 3,241 Times in 1,099 Posts
Default 6.5"

My own $.02 I prefer the 6.5" for looks and shooting. I am with Art, I believe they are better balance in both appearance and handling.
Reply With Quote
  #12  
Old 09-09-2009, 02:07 PM
44wheelman 44wheelman is offline
Member
Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel?  
Join Date: Feb 2006
Posts: 1,520
Likes: 313
Liked 777 Times in 390 Posts
Default

If you're going to buy at a gun show, I would wait & see what the sellers have to offer. Go check the completed auction on AA/GB to get a good idea of how much they are selling for.

Yes there is more demand for the shorter bbl, and they are slightly more practical; but, if you are on the fence about it, I wouldn't let the extra 1 7/8" become a deal breaker. I'd rather have a good deal on an 8 3/8 that was in excellent cond. than an average deal on a 6.5" in good condition.
Reply With Quote
The Following User Likes This Post:
  #13  
Old 09-09-2009, 02:55 PM
SWBigBang SWBigBang is offline
Member
Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel?  
Join Date: Aug 2009
Location: Central Florida
Posts: 331
Likes: 0
Liked 14 Times in 8 Posts
Default

Quote:
Originally Posted by 44wheelman View Post
If you're going to buy at a gun show, I would wait & see what the sellers have to offer. Go check the completed auction on AA/GB to get a good idea of how much they are selling for.

Yes there is more demand for the shorter bbl, and they are slightly more practical; but, if you are on the fence about it, I wouldn't let the extra 1 7/8" become a deal breaker. I'd rather have a good deal on an 8 3/8 that was in excellent cond. than an average deal on a 6.5" in good condition.
I actually did this for both and am ready for the show about 10 days away.

This is excellent advice because when you search on "Completed Auctions" you will find a HUGE difference between "asking" price and "selling" price and that goes for items in mint condition with and without box and papers.

In fact, if you do the search on Completed Auctions and order by "Highest Price" you will see numerous auctions re-listed without any bids on the high end. I was happy to see the majority of items sold in mint condition with box and papers for between $700 and $800 and mint ones with no box or papers for around $600.
Reply With Quote
The Following User Likes This Post:
  #14  
Old 09-09-2009, 03:38 PM
fyimo's Avatar
fyimo fyimo is offline
Member
Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel?  
Join Date: Jan 2009
Location: Arkansas
Posts: 18,773
Likes: 6,048
Liked 5,762 Times in 1,992 Posts
Talking

There are a lot of guns on GB that just sit there with very high prices and never sell. It doesn't cost them anything to post them and just hope that some guy comes along and pays them way to much for the gun. I bought my Model 29-2 with 6.5 inch barrel that was in 96% condition with presentation case from a forum member for $650. I had to send the presentation case to Joe to have it redone but it was still worth it.
Reply With Quote
  #15  
Old 09-09-2009, 08:31 PM
SWBigBang SWBigBang is offline
Member
Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel?  
Join Date: Aug 2009
Location: Central Florida
Posts: 331
Likes: 0
Liked 14 Times in 8 Posts
Default

Quote:
Originally Posted by fyimo View Post
...I bought my Model 29-2 with 6.5 inch barrel that was in 96% condition with presentation case from a forum member for $650.
Was that fairly recent or a long time ago?
Reply With Quote
  #16  
Old 09-19-2009, 04:39 PM
SWBigBang SWBigBang is offline
Member
Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel?  
Join Date: Aug 2009
Location: Central Florida
Posts: 331
Likes: 0
Liked 14 Times in 8 Posts
Default

Attended the show and got to handle the 8 inch barrel and thought it was GREAT.

Unfortunately no 6 1/2 inch available for comparison.

Now, it will probably go down to price and condition as to which i will gravitate to.
Reply With Quote
  #17  
Old 09-19-2009, 06:06 PM
wraco wraco is offline
Member
Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel?  
Join Date: Mar 2008
Location: Vancouver Island
Posts: 655
Likes: 293
Liked 190 Times in 77 Posts
Default

It's too bad you can't buy both and money left over for a 4". I like them all. The "Dirty Harry Special", the 6 1/2, I think, is the the best looking one of them all. Nothing wrong with the long nose either.

Rod
Reply With Quote
  #18  
Old 09-19-2009, 06:13 PM
shawn mccarver shawn mccarver is offline
SWCA Member
Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel?  
Join Date: Aug 2005
Posts: 7,907
Likes: 3,513
Liked 6,728 Times in 2,620 Posts
Default

Quote:
Originally Posted by SWBigBang View Post
This item would only be used sparingly with mild magnum loads
A "mild magnum load" - wow. We have sure come a long way.
Reply With Quote
  #19  
Old 09-20-2009, 10:04 PM
Beaver Beaver is offline
Member
Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel?  
Join Date: Jul 2007
Location: Central Oregon
Posts: 600
Likes: 0
Liked 13 Times in 8 Posts
Unhappy

I own a 29-2 nickel 6 1/2 and a blued 29-3 8 3/8. I have been shooting both a lot lately because I'm working hard on my Revolver marksmanship. I'm getting pretty deadly at 50 yds with the 8 3/8 barrel from a solid rest. The 6 1/2 would be easier to wear w/ a holster. When I'm hunting varmints/pigs etc. I usually carry the pistol, holstered in my hand, because I hate belts around my not so slim waist. I can shoot the longer barrel better. I can pack the shorter barrel easier. I usually head out the door w/ the 8 3/8s so I don't scratch the nickel on the 6 1/2. The only pig I've shot so far was with a custom 29 in 45 Colt w/ a 5 inch barrel. So, go figure. This response probably doesn't help you very much. If I could only have one 44 Mag it would be a 6 inch barrel. Dread the thought.
__________________
beaver

Last edited by Beaver; 09-20-2009 at 10:07 PM.
Reply With Quote
  #20  
Old 03-30-2012, 11:14 AM
colkid's Avatar
colkid colkid is offline
Member
Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel?  
Join Date: Apr 2009
Location: Colorado
Posts: 175
Likes: 734
Liked 140 Times in 81 Posts
Default

[QUOTE=SWBigBang;1088217]

Unless someone is going to offer a two for one sale I am going to have to choose only one and a very big gun show is coming to town in two weeks.

Buy the one you like now, and then buy the other 2 or 3 later. Not enough money? are you still eating?? LOL these guns have gone up in value and will probably continue to go up.
I bought a Lew Horton in 3" for about $350, approx. ten years ago.
Worth a lot more now.
Reply With Quote
  #21  
Old 03-30-2012, 12:12 PM
madmikeb's Avatar
madmikeb madmikeb is online now
SWCA Member
Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel?  
Join Date: Jul 2010
Location: Midcoast Maine
Posts: 1,560
Likes: 1,983
Liked 2,164 Times in 592 Posts
Default

I've got some of each and I wouldn't want to have to choose between the two lengths, they both have their place. But these days I think I prefer 4 or 5 inch for short barrels and love the 8-3/8 barrels. The 6" are a good compromise but I rarely buy any of that length these days.
Reply With Quote
  #22  
Old 03-30-2012, 02:26 PM
Bill Bates's Avatar
Bill Bates Bill Bates is offline
Member
 
Join Date: Mar 2008
Location: Utah
Posts: 2,004
Likes: 4,545
Liked 7,558 Times in 1,441 Posts
Default

I've owned a 4", 5",6", several 6 1/2" and two 8 3/8" 29s.

The 8 3/8" are nice to shoot but a pain to pack, even my 8 3/8" shoulder holster with its belt loop. I'm a short 5'8" and the shoulder holster goes well down my thigh. I can't see myself owning another 8 3/8 inch N frame.

For packing the 6 1/2" are fine and, for me, they still are not bad to shoot. It was popular with good reason.

The 5" is pure perfection. It packs well on my belt and it is pleasant to shoot. I'm surprised the 5 inch length wasn't the standard.

So for me 5, 6 or 6 1/2 inches is the way to go.
__________________
Bill Bates
Reply With Quote
The Following User Likes This Post:
  #23  
Old 03-30-2012, 02:43 PM
Harry_Callahan's Avatar
Harry_Callahan Harry_Callahan is offline
Member
Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel?  
Join Date: Mar 2012
Location: Turin, Italy
Posts: 210
Likes: 68
Liked 66 Times in 31 Posts
Default

6 1/2 = Harry Callahan
8 3/8 = Travis Bickle

__________________
Smith, and Wesson, and Me!
Reply With Quote
  #24  
Old 03-30-2012, 02:58 PM
David LaPell's Avatar
David LaPell David LaPell is offline
Member
Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel?  
Join Date: Mar 2008
Posts: 5,543
Likes: 667
Liked 6,771 Times in 1,312 Posts
Default

I know where there is a 10 inch 29-3 if you are into real artillery. It's pretty reasonable too. I thought out buying it myself and having the barrel trimmed down to 5-inches.
__________________
Vaya con Dios
Reply With Quote
  #25  
Old 03-30-2012, 03:58 PM
SWBigBang SWBigBang is offline
Member
Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel?  
Join Date: Aug 2009
Location: Central Florida
Posts: 331
Likes: 0
Liked 14 Times in 8 Posts
Default

Wow, who resurrected this old thread.

I never was able to obtain one for a good price, but still continue to keep an eye opened at the gun shows.

One day I may come across one for a good price. Whether it be a 6 or 8 inch, I may pick it up depending upon condition.
Reply With Quote
  #26  
Old 03-30-2012, 05:30 PM
Willeys Willeys is offline
Member
Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel?  
Join Date: Apr 2011
Location: North Carolina
Posts: 166
Likes: 1
Liked 77 Times in 31 Posts
Default

I owned and used a Mod 29-2, 8 3/8 inch for over 40 years. The longer barrels helps reduce recoil and provides a better sight picture. On the other hand, due to its length, it is hard to carry. I solved that problem with a cross draw holster. The 6 1/2 inch barrel is better balanced, easier to carry and fun to shoot, but does result in a little more recoil.

If I were looking for a Mod 29-2 and I am, I would want a 4 inch for occasional shooting. Then I would load the magnum brass with 44 special loads.
Reply With Quote
  #27  
Old 03-30-2012, 07:27 PM
thedane thedane is offline
Member
Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel? Model 29   6 1/2 inch or 8 3/8 inch barrel?  
Join Date: Nov 2009
Posts: 277
Likes: 0
Liked 48 Times in 10 Posts
Default

Years ago I had a 4" and 8 3/8". The 4" recoil seemed pretty brutal at the time. So, I sold it. The 8 3/8" will help with the recoil. In the last few years, I've picked up a 4" and 6.5". The 4" doesn't seem too bad to me anymore and I like to shoot it the best.

I would look out for a good deal. I don't think you can go wrong with any barrel length. There are pros and cons for each.

After you pick one, if you decide you don't like it, sell it and get another.

It's not like a marriage...
Reply With Quote
  #28  
Old 01-22-2014, 02:23 PM
SensorGhost SensorGhost is offline
Member
 
Join Date: Mar 2008
Location: America\'s Heartland
Posts: 3
Likes: 0
Liked 3 Times in 3 Posts
Default

I love my 6 1/2" barrelled Model 29-2, which I like to refer to as simply "Callahan". It's a fabulous shooter, and looks great doing it!
Attached Images
File Type: jpg Im000714.jpg (104.3 KB, 150 views)
__________________
"Well, we're not gonna just let you walk outta here...Smith & Wesson and me."
Reply With Quote
The Following User Likes This Post:
Reply

Tags
44 magnum, 629, 650, colt, lew horton, marksmanship, model 29, model 57, postwar, presentation

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Please Close - S&W 4 Inch 22LR Barrel & S&W 4 Inch 38 S&W Special Barrel OldK22 Accessories/Misc - For Sale or Trade 0 11-22-2015 10:21 PM
Any reason not to rebarrel a 4-inch 686 with a 3-inch barrel? jeffrey S&W Revolvers: 1980 to the Present 13 01-14-2014 08:53 PM
Aside from barrel length are the 629 2.5 inch and 3 inch identical in size? LSUDVM S&W Revolvers: 1980 to the Present 4 01-05-2014 03:26 AM
Model 29 four inch vs. six inch barrel. davidenorth S&W Revolvers: 1980 to the Present 33 10-13-2012 06:51 PM
!!3 INCH 357 MAG BARREL AND CYLINDER!!SIG 226 10 RD 17,617 6 INCH 22 CAL.TOOL KIT twomoons Accessories/Misc - For Sale or Trade 14 11-27-2010 02:01 AM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 08:47 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)