Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Revolvers > S&W Revolvers: 1961 to 1980
o

Notices

S&W Revolvers: 1961 to 1980 3-Screw PINNED Barrel SWING-OUT Cylinder Hand Ejectors WITH Model Numbers


Reply
 
Thread Tools Display Modes
  #1  
Old 03-26-2011, 03:12 PM
redlevel's Avatar
redlevel redlevel is offline
Member
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Jan 2004
Location: GA
Posts: 5,699
Likes: 8,045
Liked 12,731 Times in 2,419 Posts
Default Run of the Mill Model 10--How Much?

How much is a Model 10 worth today? Nothing special, lets say, just a 3-screw pinned-barrel, 4" Model 10. Maybe a little wear on the end of the barrel, and the usual handling marks, slight dings on the grips, etc. I'm not talking about police trade-ins, just good, everyday, no rust, no pitting, no abnormal wear guns. I say $275 OTD. That would figure to $250 plus GA tax, or $275 f/f private sale. I figure that's up about $100 from what I could buy them for about 6-8 years ago.

I figure the earlier the gun, the higher the value, given the same condition. I would be willing to pay a tad more for an earlier dash-number gun. Also, it appears to me that 2" barrels bring a little more. I believe, practically speaking (not according to any "book value", most of which I think list "a slight premium" for nickel guns), a very nice nickel plated original gun will bring $75 more than a comparable blued gun. I put a nickel 10-5 on lay-away for $350 plus tax at the same time I bought the 10 no-dash for $275 plus tax. There is no way I would give that for a blued Model 10.

These guns, along with the Model 28s, are an interesting phenomenon. Nice S&W Model 19s, 29s, 27s, 57s, 58s, etc have always brought good money. Up until about 10 years ago though, Model 10s and Model 28s were "hard stock" on a dealer's shelves. They were so common, I guess, that no one wanted them. Now, I almost never see a Model 28 at my dealer, and there are people waiting for Model 10s. I am lucky (unlucky?) enough that the main gun guy at the NAPA is one of my best and oldest friends, and he always calls me immediately when a Smith he thinks will interest me comes in. It seems like there has been an abnormal number of pretty nice Model 10s traded in in the last few weeks, and it is about to break me.

Are my figures close? Do you think these guns will be worth $100 more in the next 8-10 years? To what do you attribute the seemingly sudden interest in this most common species of .38 special?
__________________
Georgia On My Mind
Reply With Quote
  #2  
Old 03-26-2011, 03:28 PM
RussellD RussellD is offline
Member
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Jun 2009
Location: America
Posts: 1,562
Likes: 17
Liked 775 Times in 378 Posts
Default

The days of the bargain priced Model 10's are slowly coming to an end. As the number of private security companies trade ins slowly fade from the market..you only see a few private sale model 10's here and there.

At this point I believe your estimates are spot on if even a tad low. I believe the economy is flushing out a few deals here and there..but the supply is not what it once was. Example-J&G and Summit Gun Broker have not had a stock of used model 10's in the past few months.

If I see one in good clean shape for less than $275 I am probably reaching for my wallet.
__________________
The American dream is alive
Reply With Quote
  #3  
Old 03-26-2011, 03:28 PM
gkitch gkitch is offline
SWCA Member
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Feb 2006
Location: Charleston SC
Posts: 1,521
Likes: 3,791
Liked 1,844 Times in 469 Posts
Default

I think you nailed it.
S&W made millions of these guns over the years and sold them all over the world. They are good guns to have but still common enough on the used market to remain affordable. $250-$300 is the fair retail price for a representative example.
Reply With Quote
  #4  
Old 03-26-2011, 04:12 PM
canoeguy canoeguy is online now
US Veteran
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Dec 2005
Location: Far Southwest Virginia
Posts: 1,620
Likes: 512
Liked 3,783 Times in 474 Posts
Default

I started collecting police agency marked Model 10's/M&P's about six years ago, $250 was my price "Goal", some I paid a little more for....

Before I knew it, I had over 25 police marked M&P's! I have traded or sold over half of them since to fund other collecting goals, but $250 seemed to be the going price for a while there.

Haven't seen any for $250 for a while now, $300-$350 seems to be the rate now, at least in my neck of the woods (Virginia).

Think about what is available on the new market now, $400 won't buy you any quality pistol or revolver. I look at my own personal protection revolvers, a 2" Model 64, a 4" Model 64 and a Model 36 Chiefs Special, none of them available for any price new, yet only $250 used.
Reply With Quote
  #5  
Old 03-26-2011, 05:29 PM
stantheman86 stantheman86 is offline
US Veteran
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Jan 2010
Posts: 2,468
Likes: 6
Liked 473 Times in 236 Posts
Default



Depends on what you want, I got this M&P for $300 recently. I was able to get it with my C&R, too, double bonus.......the thought of legally being able to get S&W's shipped right to my door makes me warm and fuzzy all over



I traded a beat up Swedish Mauser and about $100 in "boot" for this 10-8. Came out to maybe $200, since the Swede Mauser was so beat people were balking at my $200 asking price, so it was probably worth about $100.



Got this old PD marked M&P for about $350, probably the lowest you'll see any 5" round butt M&P. To some people, these are still just "old obsolete revolvers" and they want to sell them to fund some other purchase for a plastic gun or an AR-15.......and I am here to help them fund those "black guns", by giving them fair prices for their old, beat up wheelguns



The sudden interest in them is because people are being scared away from the "cool" stuff like 27's and 29's by rising prices, and going for the "common" Model 10's and 64's because there are more of them out there. And then the prices on these start rising. I used to see tables of security trade in Model 10's at gun shows in the late 90's-early 2000's, sometimes they were even mixed in with Taurus 82's and all of them were priced at $150..imagine that, a time when used Taurus and S&W service revolvers were priced the same.......and some people were buying the Taurus' over the Smiths.........it wasn't too long ago the Model 10 wasn't held in high regard, they were just "old cop guns" people would buy to throw in the tackle box.....now like everything else they are "collectible". I also used to see Model 28's for a lot less, too, that was only a few years ago. They were "poor man's 27's", now 28's are getting up to $500 for holster worn 6" guns.

The economy and gas prices are driving people to take "that old revolver" out and sell it, sometimes they just don't want them. I don't see holster worn, or reblued M&P's ever being worth a "premium", the fixed sight .38's like 10's and 64's will never bring anywhere near what high condition Registered Magnums, 14's, 29's etc. bring.

Real hard core S&W collectors do not tend to collect Model 10's, they will always be "plain vanilla" to them, it's the 27's and pre-29's with matching Coke grips that they will be fighting over. The Model 10 will always be the mediocre looking girl at the bar at 2am that everyone hits on when all the hot girls are gone.......which is fine, I was always the kinda guy who hits on the average looking ones first.......

If you like Model 10's, start buying them now, so in 10 years when everyone's like "remember the days of $300 Model 10's" when they are $600 guns by then, you'll already have 20 of them.

Last edited by stantheman86; 03-26-2011 at 05:38 PM.
Reply With Quote
  #6  
Old 03-26-2011, 05:30 PM
roaddog28's Avatar
roaddog28 roaddog28 is offline
Member
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Feb 2009
Location: Escondido, CA
Posts: 1,147
Likes: 185
Liked 214 Times in 72 Posts
Default

Hi,
In my neck of the woods model 10s and M&Ps have really gone up in value. I bought the current dash number two years ago brand new for $334 out the door from a surplus store going out of business. Last year I bought a M&P pre-10 4 inch without a box but over 95% condition for $399 out the door. Two weeks ago I saw a model 10-5 with the box for $575 plus fees in a gun shop. So even though the model 10 is not rare they are commanding high prices compared to even two years ago.


Regards,
Howard

Last edited by roaddog28; 03-26-2011 at 05:35 PM.
Reply With Quote
  #7  
Old 03-26-2011, 05:41 PM
stantheman86 stantheman86 is offline
US Veteran
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Jan 2010
Posts: 2,468
Likes: 6
Liked 473 Times in 236 Posts
Default

I noticed 64's are overall cheaper than Model 10's now, it used to be the other way around......

I saw a guy with about 10 security trade in 64-3's at a gun show for $300, and he only sold a few of them. But a Model 10-8 went for $400 at another table.
Reply With Quote
  #8  
Old 03-26-2011, 05:56 PM
GF's Avatar
GF GF is offline
SWCA Member
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Jan 2006
Location: Southern Indiana
Posts: 4,634
Likes: 2,805
Liked 4,156 Times in 1,126 Posts
Default

Hard to add anything to Stantheman86's well thought out and well written post.
I'll add that a high condition gun, even a model 10 will bring a premium on price.
But with a common model, a smaller one.

M&P's are starting to get some attention and a higher price too.

GF
Reply With Quote
  #9  
Old 03-26-2011, 07:46 PM
wnr700 wnr700 is offline
Member
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Dec 2009
Posts: 355
Likes: 0
Liked 15 Times in 12 Posts
Default

My local pawn shop has fantastic prices.

I have picked up a wonderful Model 64 DAO for $250.

Currently they have a good looking Model 10-5 with original grips asking... $295

If I didn't have other needs and wants, it would have come home with me.
Reply With Quote
  #10  
Old 03-26-2011, 09:36 PM
stantheman86 stantheman86 is offline
US Veteran
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Jan 2010
Posts: 2,468
Likes: 6
Liked 473 Times in 236 Posts
Default

M&P's are also getting more attention, people are starting to appreciate their classic lines and old police history. Older gentleman are "nostalgic" for days when Officer Freindly had a 6" S&W M&P in a flap holster on a Sam Browne belt, held up by a shoulder strap........and drove around in a '40 Ford with a gumball machine siren on top. The M&P's have a lot of history behind them and collectors are starting to see this.....these were guns made back in an era when the .38 Special service revolver was still king, and shooting them single action with a one-hand hold at bullseye targets was the way target shooting was done.

Prices on ALL the old Smiths is going up........the more plastic junk people look at, the more Glocks and XD's we are inundated with at gun shows, the more those old .38's from the 1900's-1950's start to look like gold........wait until there's a mainstream movie with big movie stars featuring old DA wheelguns and prices will double.....I'm sure "Public Enemies" helped move some old Colts after a few gun guys watched it and had the urge for some Police Positives, Official Police .38's and .38 Super 1911's. The guy at Gander Mt. said after 3:10 to Yuma came out guys were coming in looking for Italian repro Peacemakers and Schofields......I guess the point to my rambling is the market is wierd, people will suddenly want things for different reasons and other things will drop in value for no apparent reason. I'm starting to see prices on S&W's actually surpass Colts, GunBroker is littered with $2-300 Police Postives in .38 Special,.38 S&W and .32 Long that have relisted over and over, but try finding a Model 10 or M&P for that low.

Last edited by stantheman86; 03-26-2011 at 09:40 PM.
Reply With Quote
  #11  
Old 03-26-2011, 09:51 PM
sqhead sqhead is offline
US Veteran
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Jan 2010
Location: east central fla.
Posts: 1,194
Likes: 319
Liked 373 Times in 200 Posts
Default

just a few days ago i hit a local gun shop and found a model 10-8,but the kicker was it was a 3 in. barrel ,round butt w/ mint s&w banana grips,no box or anything,it was marked 287.00,so i snatched it up.Is a 3 in round butt a little more rare?the blueing was near perfect.
Reply With Quote
  #12  
Old 03-26-2011, 10:26 PM
stantheman86 stantheman86 is offline
US Veteran
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Jan 2010
Posts: 2,468
Likes: 6
Liked 473 Times in 236 Posts
Default

3" M10's are highly sought after, you did great for that price

I think the 3" square butts are much less common, I believe most were RB's but I could be wrong.
Reply With Quote
  #13  
Old 03-26-2011, 10:59 PM
Badkarma 1's Avatar
Badkarma 1 Badkarma 1 is offline
US Veteran
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Oct 2010
Location: East St. Louis, Il.
Posts: 1,698
Likes: 3,592
Liked 617 Times in 343 Posts
Default

My own take mirrors stanthemans, especially how blued and nickle model 10s and even 13s are commanding more money than their stainless brothers. I can still find used 64s for about $300 at the local gun shows, and the recent batch of 64 snubs are between $300 and $350 depending on condition.
I myself just got a 10-10 for $350 and it had been reblued yet was otherwise perfect. And my old 10-7 set me back $200 it was a wreck, but I revived it. I intend to add a 64 to the collection soon too. Dale
__________________
"Long live the S&W 3rd. Gen.!"
Reply With Quote
  #14  
Old 03-27-2011, 01:54 PM
ColbyBruce ColbyBruce is offline
Member
 
Join Date: Nov 2007
Location: Atlanta, GA
Posts: 7,854
Likes: 3,767
Liked 11,624 Times in 3,642 Posts
Default

Red level, I offered to take you shopping, LOL!!

My $120.00 10-7. The SB stocks have a huge chunk missing on the left corner, so I put the Pachmayr's on it for now. My nephew wanted a handgun of his own, so we went with this one.


Last edited by ColbyBruce; 03-27-2011 at 02:12 PM.
Reply With Quote
  #15  
Old 03-27-2011, 02:19 PM
ronnie gore ronnie gore is offline
Member
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Sep 2007
Location: newnan,ga
Posts: 991
Likes: 13
Liked 508 Times in 188 Posts
Default model 10s

yes it is hard to believe how much the 28s and the 10s are now. i recently bought a pre model 10 made in 1953 and paid more than i thought i would ever pay for one of these guns, but you have got to consider there will never be anymore of them. i paid $395.00 for this one, after i got it home i was glad i did, the grips are numbered to the gun also.
also are you shopping at Bo Barrow's place.
Attached Images
File Type: jpg 000_0613.jpg (83.6 KB, 211 views)
File Type: jpg 000_0614.jpg (81.3 KB, 194 views)
File Type: jpg 000_0615.jpg (59.4 KB, 143 views)

Last edited by ronnie gore; 03-27-2011 at 02:24 PM.
Reply With Quote
The Following User Likes This Post:
  #16  
Old 03-27-2011, 02:20 PM
Pointblank2U's Avatar
Pointblank2U Pointblank2U is offline
US Veteran
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Jun 2005
Location: Ohio
Posts: 641
Likes: 51
Liked 1,175 Times in 318 Posts
Default

I guess it depends what you want and how bad you want it. I paid $525 for this, but it's kind of rare, was in nice shape and I really wanted it:

__________________
Loyalty Above All.. but Honor
Reply With Quote
The Following User Likes This Post:
  #17  
Old 03-27-2011, 02:48 PM
ColbyBruce ColbyBruce is offline
Member
 
Join Date: Nov 2007
Location: Atlanta, GA
Posts: 7,854
Likes: 3,767
Liked 11,624 Times in 3,642 Posts
Default

Ronnie, I shop at the place near my work I have told you about. Here is my 1953 pre-#18 .22 revolver.
Reply With Quote
  #18  
Old 03-27-2011, 02:55 PM
stantheman86 stantheman86 is offline
US Veteran
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Jan 2010
Posts: 2,468
Likes: 6
Liked 473 Times in 236 Posts
Default

The fact is there are more "collectors" now and no more older S&W's being made........supply and demand, for the nicer "collectible" guns at least.

Condition is EVERYthing, condition collectors want NIB Smiths with all the toys and papers. The 10's are not rare and never will be, especially the later models from the 70's onward. Heavily used and holster worn examples won't ever have the "premium" prices.

I saw a reblued 6.5" 27 at a gun show for $450 and it was still there when I left. If I had some extra cash I would have bought it as a shooter, but there's an example of a gun "collector's" won't go for and that's a little high for the average guy looking for an older revolver. Which is the reason the $2-300 Model 10's are getting scarce, lots of people who are "kinda into guns" just want "one of those old S&W's" to play around with,so they are sucking up the 10's and 64's because you can get one without breaking the bank. Dealers see this and start creeping the prices up, they know if they price a security trade in 10 at $400 someone will eventually buy it.

I saw the same thing after the "Saving Private Ryan - Band of Brothers- Call of Duty 3" phenomenon of 7-8 years ago. Garands and M1 Carbines doubled in price pretty much overnight because everyone decided they wanted "a WWII rifle" and was willing to pay a high price to get one.
Reply With Quote
  #19  
Old 03-27-2011, 03:14 PM
bigmoose's Avatar
bigmoose bigmoose is offline
Member
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Apr 2010
Location: Central New York State
Posts: 1,616
Likes: 3,459
Liked 2,104 Times in 629 Posts
Default Why do I like the Model 10?

Because it fits my hand perfectly, points easily, shoots wonderfully, looks great, and doesn't cost a ton of money. Plus the .38 Special is just an all around great caliber. I had a mint 28 Highway Patrolman, but man was that piece heavy. Sold it (cheap, who would have known?) to a good friend years ago and never regretted it. We all have our likes and dislikes, luckily S&W has made a wide variety of guns to satisfy most of us. Anyways, I picked up this mint 10 for $312 plus tax recently...it is one of my favorites to shoot...and I believe nice model 10's will be in demand in the not too distant future.
Cap
Attached Images
File Type: jpg Model19 001.jpg (118.7 KB, 153 views)
Reply With Quote
  #20  
Old 03-27-2011, 05:24 PM
wheelgun28's Avatar
wheelgun28 wheelgun28 is offline
Member
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Jan 2009
Location: SW CT
Posts: 2,419
Likes: 2,535
Liked 3,024 Times in 950 Posts
Default

I think with affordable guns prices vary across the country.

I have picked up some very nice 10s and paid good money for them. Like a 10-8 SB 4" HB with two piece box, docs and tools. I paid $400 for it, once polished up its almost perfect.

I also bought a 10-5 SB 4" taper barrel very traditional looking M10. It has a mark on on side of the barrel, quite small but noticeable. The rest of the blue is drop dead gorgeous one of the nicest I have. I paid $350, perhaps a bit to much, but its a nice piece and I am glad to have it even if I feel I paid $50 or $75 to much for it.

I also bought a M64 SB 4" DAO NY-1 gun. Most of the original frost finish is gone worn off or polished but looks really nice. It had Pachmayer grips that show use. I paid $200 or $250 for it, nice gun shows well and makes for a great conversations. I think it was a steal for the price. Oh it was traded in to the dealer by the original PO that carried it.

I dont mind paying a little bit more for something that I like and want. It will (hopefully) balance out over time. I dont intend to flip them or sell them soon so buy it now. Its better than say Enron stock or buying a new car.
Reply With Quote
  #21  
Old 09-30-2015, 02:41 PM
ISCS Yoda's Avatar
ISCS Yoda ISCS Yoda is offline
US Veteran
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Feb 2013
Location: Dallas, Texas
Posts: 8,386
Likes: 2,475
Liked 13,044 Times in 4,531 Posts
Default

These threads need to connect!!!

Is $550.00 the magic number for Model 10s?
Reply With Quote
  #22  
Old 09-30-2015, 03:18 PM
K-framer K-framer is offline
Member
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Dec 2011
Location: Eastern US
Posts: 374
Likes: 1
Liked 315 Times in 123 Posts
Default

I just recently sold a 3" HB/ RB Model 10-8 for $475.....and the finish was not perfect.

Of course, the 3" guns do command a premium.

But, my experience is that prices are all over the place - at least they are around here.
Reply With Quote
  #23  
Old 09-30-2015, 05:38 PM
pharmer's Avatar
pharmer pharmer is online now
Member
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Mar 2002
Location: Santo las nubes, Florida
Posts: 8,965
Likes: 9,178
Liked 14,618 Times in 4,680 Posts
Default

Quote:
Originally Posted by redlevel View Post
Do you think these guns will be worth $100 more in the next 8-10 years?
Can't fault your numbers except for this. In 8-10 years any cash I have today will have been gone 8-10 years. Even if I overpay, 40 years from now I'll still have the gun. Of course I'll have been dead for at least 20 years so the discussion becomes moot at that point. Last Model 10 I bought was this 10-11 maybe 8 years ago. Paid $350+ tax and call in for $377 total. Joe
__________________
Wisdom chases me; I'm faster
Reply With Quote
The Following 2 Users Like Post:
  #24  
Old 10-01-2015, 08:45 AM
Pointshoot Pointshoot is offline
Member
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Nov 2002
Location: WA state
Posts: 220
Likes: 212
Liked 124 Times in 71 Posts
Default

I guess it all comes down to what region you're in. I don't see many old K frames in my area that are in decent shape or bargain priced. I bought some armor car company model 64 and model 10 trade-ins a couple years ago and paid $250-275 for each of them. (When no one could find any 9mm around, I thought it would be a very good idea to have a few more 38 Special wheel-guns). I don't see those kind of prices on guns in comparable shape today. (I haven't been looking hard since I have what I need already, though.)
I also remember how cheap 28s were. You saw them in the LGSs all the time, and they usually just stayed in the glass case. Not a lot of customer interest.

Last edited by Pointshoot; 10-01-2015 at 08:48 AM.
Reply With Quote
  #25  
Old 10-01-2015, 09:42 AM
gkitch gkitch is offline
SWCA Member
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Feb 2006
Location: Charleston SC
Posts: 1,521
Likes: 3,791
Liked 1,844 Times in 469 Posts
Default

As a collectible, the M&P/Model 10s are interesting as they are historically significant and made in so many variations over the years that one could almost never track them all down. Even if one desires to collect a much smaller subset (i.e. 10-2, nickel only) it would be a collector's challenge.

The other side of the coin is that these guns remain desirable to shooters. A solid, reliable 38 Special is a good thing to have around and there are very limited options in the new-gun market. Even though there are millions of well-used K-frame 38s out there there are also millions of practical buyers as long as the prices remain sensible.
Reply With Quote
  #26  
Old 10-01-2015, 09:53 AM
K-framer K-framer is offline
Member
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Dec 2011
Location: Eastern US
Posts: 374
Likes: 1
Liked 315 Times in 123 Posts
Default

This thread brings to mind an interesting (and I think important) point. There is NO value to any particular gun - or any other object - than that which a particular individual, at a particular time, is willing to pay for that object. We all know this - but I think it bears repeating.

Case in point: My recently sold model 10-8. Far from pristine, but mechanically excellent, no box, etc. Yet, someone was willing to pay me $475 for it, plus around $70 in shipping costs. The 10-8 is a 3" - which many (including myself) hold in very high esteem. I myself, a few weeks ago, paid $500 to an individual for a 3" HB/ RB model 64, in excellent condition (but with no box, etc.). Why ? I WANTED it - because 3" HB/RB's are my favorite configuration - and the model 64 is my favorite model.

Since I like the 3" model 64's so much, I likely would have paid more, if necessary.

So, what is the REAL value of those two guns ? I was surprised that anyone would give me $475 for my 10-8 - I would NOT have paid that much for it. Yet, for the same gun, except in stainless, I happily shelled out $500....and would have paid a bit more to get it. So, it could be said that the value of those two guns was just what was paid, by the two individuals involved, on that specific day.

On another day, with other individuals, however, the selling prices might well be very different.

There is a certain model 15, in about 90% condition, sitting in a gun case at an LGS nearby to me, priced at $399. Some people on another thread have said that they would "tear their pockets" while rushing to get their wallets out, in order to get that gun. While I don't by any means think that the model 15 is overpriced, I would much rather have my $500 model 64 than that one.

The point of all this being, we can attempt to keep track of price trends on things like these fine revolvers that we prize so much, as if the prices actually make sense, or follow some rules. But, they don't. That is why prices I see are literally all over the place. So, in essence, threads like this really don't nail down anything. Prices for things like these fluctuate, by the day and hour. That's just the way it is. It's not scientific and the "normal" rules of economics don't always apply.

So, how much is a "run of the mill" model 10 worth today ? Just exactly what someone is willing to pay for it - nothing more, nothing less.

Last edited by K-framer; 10-01-2015 at 09:57 AM.
Reply With Quote
The Following User Likes This Post:
  #27  
Old 10-01-2015, 10:08 AM
Pointshoot Pointshoot is offline
Member
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Nov 2002
Location: WA state
Posts: 220
Likes: 212
Liked 124 Times in 71 Posts
Default

Well, I think we're trying to get a sense of what an 'average' price might be. That is, what the vast majority of people would be willing to pay. I know a gunshop in a neighborhood where lots of high tech software companies are located. That LGS charges above list price for their guns. Their customer base doesn't care (it seems). They make lots of money, so an extra $100 or two doesn't register and they want what they want Now.
Now those guns may be worth above list price to them, but they sure aren't worth that to the vast majority of gun buyers.
Reply With Quote
  #28  
Old 10-01-2015, 11:16 AM
K-framer K-framer is offline
Member
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Dec 2011
Location: Eastern US
Posts: 374
Likes: 1
Liked 315 Times in 123 Posts
Default

"Average price" really only applies to new products, being sold for the first time. New guns, just as new cars, toasters, etc., can be tracked that way. But, used guns, like the classic S&W revolvers, especially the older ones we all seem to favor, are a different matter.

I understand the desire to gain a sense of what the market is doing, as regards prices. It's natural that we all would like to have such information. I am just saying that it is not always possible to nail this down, due to the vagaries of the market.

We can all brag about getting a "great deal" on a great gun.....or paying "a bit too much", but not caring because we really wanted that particular gun. Those price numbers are outliers, as regards statistics. Folding ALL prices paid into an "average" only skews the results. A more valid comparison would be to throw out the highs and lows, then average the remainder. But, who is going to put that much effort into such analysis ? Besides, a great many transactions of this type are conducted on the "private" market, with the results not knowable by the rest of us. So, there is NO way to have a full picture, from which we can derive an "average" price. Therefore, any such "average" values postulated in a thread like this are really only guesswork.

That's all I am saying.

Nevertheless, the desire for such information will not go away, so speculation on this matter will continue forever. I don't blame anyone, it interests me, too. I was just attempting to make a clarification.

Enough said.

Last edited by K-framer; 10-01-2015 at 11:22 AM.
Reply With Quote
  #29  
Old 10-01-2015, 11:32 AM
Pointshoot Pointshoot is offline
Member
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Nov 2002
Location: WA state
Posts: 220
Likes: 212
Liked 124 Times in 71 Posts
Default

If 'average price' only applied to new products, there wouldn't be car blue books and various other such guides. Pawn shops and gun shops also have a good idea what they can buy & sell used items for. Yes, there are outlier buyers and sellers. Some guys will pay a lot more for something than most. Some will list something far higher than what most will pay (see that on GB all the time). If those two meet, both will be satisfied. Its far more likely that the ad will get no replies for a very long time.

Example - If the average price in a given area is $ x for a gun in y condition and you paid 50% more than that, you may be satisfied, but you still didn't get a good deal. And by the way, there have been times when I paid more for a gun than I should have. I'd been looking a long time and didnt want to spend the time & effort looking further. Other times, the gun just looked so darn 'purdy' that I had to have it !
I've paid a premium above the existing market for top condition guns. And actually, over time that has worked out well with rising prices.

P.S. - there are statistical methods for accounting for outliers.

Last edited by Pointshoot; 10-01-2015 at 11:48 AM.
Reply With Quote
  #30  
Old 10-02-2015, 01:56 AM
Frank46 Frank46 is offline
US Veteran
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Sep 2010
Location: New Iberia, Louisiana
Posts: 4,588
Likes: 25,427
Liked 3,380 Times in 1,736 Posts
Default

I've always wanted a nice model 10. had a NYC target permit and a gold Cup but gave it up when I moved onto long island. When I moved to Louisiana nice model 10's were about as plentiful as rocking horse apples. i had to go back to NYC and was able to get a copy of my friend's FFL. After all the legal BS was taken care of I went to a shop where over the years I had done a lot of buying and selling. Asked if they had any used model 10's. Stupid question as the owner pulled out a large cardboard box full of them. I started pulling them out one by one putting them on the counter. Found one that was a cut above the rest. Cost me $100 plus shipping to my FFL. After I came home my FFL buddy called and said your revolver came in. Did the paperwork and the old girl was mine. So 3000 miles or so and $100 and I had a nice model 10. Locks up tight and is nicely accurate with 158 grain lead round nosed ammo. Frank
Reply With Quote
  #31  
Old 10-02-2015, 02:42 PM
blujax01's Avatar
blujax01 blujax01 is offline
Member
Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much? Run of the Mill Model 10--How Much?  
Join Date: Aug 2010
Location: C-Bus
Posts: 6,335
Likes: 4,311
Liked 4,916 Times in 2,086 Posts
Default

Looking through a gun selling web site and filtering to Buy-It-Now, you have to get through the beaters at $250-$275, and the police trade in marked with a rack number at $300-$350 to get to the run of the mill 80% finish left starting at $375.

But, as others have said, they're worth exactly what you're willing to pay, no more nor less.
Reply With Quote
Reply

Tags
1911, bullseye, coke bottle grips, highway patrolman, model 10, model 10-5, model 28, pachmayr, patrolman, pre-10, round butt, swedish mauser, taurus, wwii

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
info on a 39-2 9 mill rattitude Smith & Wesson Semi-Auto Pistols 3 02-13-2016 10:35 PM
I'm not much for the rumor mill but... kozmic The Lounge 49 04-02-2013 01:04 AM
More Grist for the Grips Mill bushmaster1313 S&W Revolvers: 1961 to 1980 9 05-02-2011 08:00 PM
So I got a new to me Mill or Mill/drill tallpaul S&W-Smithing 19 07-29-2010 08:13 AM
Questions regarding a mill and a lathe.... RightWinger S&W-Smithing 16 01-03-2010 12:33 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 09:20 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)