Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Revolvers > S&W Revolvers: 1961 to 1980
o

Notices

S&W Revolvers: 1961 to 1980 3-Screw PINNED Barrel SWING-OUT Cylinder Hand Ejectors WITH Model Numbers


Reply
 
Thread Tools Display Modes
  #1  
Old 06-20-2011, 11:27 AM
A320graham's Avatar
A320graham A320graham is offline
Member
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Aug 2010
Location: Sunny SW Florida
Posts: 146
Likes: 3
Liked 4 Times in 4 Posts
Default S&W 28-2

Found a S&W 28-2 for sale, $449 with Pachmayr grips no box.
Please tell me what to look for on the pistol before I buy it.
And what is Pinned and Recessed?
Thanks
Me.
Reply With Quote
  #2  
Old 06-20-2011, 12:19 PM
oldgun oldgun is offline
Member
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Dec 2010
Posts: 26
Likes: 0
Liked 0 Times in 0 Posts
Default

Pinned means the barrel is pinned at the frame to keep it from turning loose. It is not done these days. You can see the pin just above the barrel on the frame. If you do a search on the forum, you'll find lots of information about it.

Recessed means the cartridges fit flush with the back of the cylinder. If you look at it, you'll see what I mean. This also is no longer done. It allowed for tighter tolerance at the barrel/cylinder interface.

As far as what to look for, primarily you want a tight lock-up when you put it in single action mode, little to no end-play on the cylinder, no signs of significant dents, marks, etc., which would indicate dropping or other abuse. Again, you can look up what end-play and lock-up mean on this forum. Others have described them in detail in earlier posts.

Typical model 28-2, if used, would show signs of wear from holster, etc., but number of round counts can be hard to determine. You want it to be clean and tight. The price would be ok on one that is. I'm sure you'll get some other responses. This is a great forum for S&W revolvers.

Hope that helps.

Oldgun
Reply With Quote
  #3  
Old 06-20-2011, 12:20 PM
fyimo's Avatar
fyimo fyimo is offline
Member
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Jan 2009
Location: Arkansas
Posts: 18,773
Likes: 6,048
Liked 5,762 Times in 1,992 Posts
Talking

Well a pinned barrel means there is a pin that protudes above the barrel in the top of the frame and recessed means the cylinders are counter bored so that the whole bullet case including the rim fits inside the chamber. On a non recessed cylinder the case rims sit outside the chamber and are against the cylinder face and can be seen when you look at the revolver when the cylinder is closed.

Check the side pay by gently turning the cylinder in the revolver when the cylinder is closed and some is normal but a lot is not. Also check this when the hammer is cocked because that is when lockup is critical.

Someone else can discuss end play but it's basically the cylinder moves up and down instead of in a rotational movement when closed.

Picture of a revolver with pinned barrel
Reply With Quote
  #4  
Old 06-20-2011, 01:20 PM
A320graham's Avatar
A320graham A320graham is offline
Member
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Aug 2010
Location: Sunny SW Florida
Posts: 146
Likes: 3
Liked 4 Times in 4 Posts
Default 28-2

Thanks Guys.
I see what it means.
Of course now I have seen a 29-3 6" barrel.
In good condition it is $100 more.
No box or paperwork.
So which one.
Reply With Quote
  #5  
Old 06-20-2011, 03:28 PM
sw282's Avatar
sw282 sw282 is offline
Member
 
Join Date: Jun 2009
Location: CSRA
Posts: 2,125
Likes: 869
Liked 1,629 Times in 779 Posts
Default

si--------

Last edited by sw282; 07-02-2011 at 04:11 PM.
Reply With Quote
  #6  
Old 06-20-2011, 11:06 PM
Davwingman's Avatar
Davwingman Davwingman is offline
US Veteran
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Mar 2007
Posts: 936
Likes: 9,932
Liked 1,800 Times in 329 Posts
Default

I think he means which one first.
Reply With Quote
  #7  
Old 06-20-2011, 11:09 PM
samandglove1's Avatar
samandglove1 samandglove1 is offline
Member
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Jul 2010
Location: Massachusetts
Posts: 1,327
Likes: 939
Liked 1,437 Times in 362 Posts
Default

Everyone should have at least one HP.
Reply With Quote
  #8  
Old 06-21-2011, 03:03 AM
JP@AK's Avatar
JP@AK JP@AK is offline
US Veteran
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Mar 2011
Location: Palmer, Alaska
Posts: 14,479
Likes: 5,113
Liked 18,984 Times in 6,864 Posts
Default

Quote:
Originally Posted by A320graham View Post
So which one.
Hello
This is really a question only you can answer, but let me give you a couple things to think about.
Both the guns you are looking at are N frame Smiths. These are wonderful and very durable revolvers. But one is chambered for the .357 Magnum and the other for the .44 Magnum.
Both have the advantage of allowing you to shoot lighter loads. In the case of the Highway Patrolman you can shoot .38 Specials; in the case of the Model 29, you can shoot .44 Specials. That means you can practice with rounds that are much easier on your hand and more conducive to accurate shooting while you get to know your gun. But the price of ammo may be a factor. .38s will cost you less money and will be easier to locate than .44 Specials. Unless you are a handloader, this can add up over time.
When it comes to full house magnum loads, the same is true. .357 Magnums are going to be less expensive than .44 Magnums. They are also going to be easier to shoot. If you are a novice shooter, I really think you'd be better off with the Highway Patrolman as a starter gun. My first centerfire revolver was a Highway Patrolman and I have never regretted that acquisition. I've bought several more of them since that time and they are still among my favorite handguns. (They were also first guns for two of my sons!)
As someone has suggested, this will probably not be the end of the line for you. You can always (and probably will) acquire another Smith down the road. So there is plenty of time for a .44 to take its place alongside your .357.
Good luck - and let us know what you decide to do.
JP
Reply With Quote
  #9  
Old 06-21-2011, 03:06 AM
JP@AK's Avatar
JP@AK JP@AK is offline
US Veteran
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Mar 2011
Location: Palmer, Alaska
Posts: 14,479
Likes: 5,113
Liked 18,984 Times in 6,864 Posts
Default

By the way - in case it matters to you - the 29-3 is not a p&r gun. The Model 28-2 is.
JP
Reply With Quote
  #10  
Old 06-21-2011, 03:17 AM
JP@AK's Avatar
JP@AK JP@AK is offline
US Veteran
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Mar 2011
Location: Palmer, Alaska
Posts: 14,479
Likes: 5,113
Liked 18,984 Times in 6,864 Posts
Default

For the fun of it, here's a Model 28-2 Highway Patrolman. This particular example is a 1972 vintage gun with a 6" barrel.
JP
Attached Images
File Type: jpg Model 28-2 6 comp.jpg (91.6 KB, 284 views)
Reply With Quote
  #11  
Old 06-21-2011, 07:01 AM
CajunBass's Avatar
CajunBass CajunBass is offline
Member
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Mar 2010
Location: North Chesterfield, Va.
Posts: 6,260
Likes: 8,751
Liked 13,218 Times in 3,271 Posts
Default

And here's my 4" barrel 28-2 from 1978.



It looks like serious business to me.

This is a K-frame Model 15, but it may give you an idea of a non recessed gun. Note the difference in the gap between the back of the cylinder and the recoil shield.

__________________
John 3:16 .

Last edited by CajunBass; 06-21-2011 at 07:05 AM.
Reply With Quote
  #12  
Old 06-21-2011, 07:08 AM
Maximumbob54's Avatar
Maximumbob54 Maximumbob54 is offline
Member
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Oct 2010
Posts: 7,202
Likes: 9,079
Liked 1,921 Times in 1,043 Posts
Default

You will punch yourself in the face later if you pass up that Highway Patrolman. You better snatch that bad boy up fast. They are starting to go for rediculous money. 29's are everywhere since so many people shoot them once, cry their hand hurts, and then strade them in. And a 29-3 isn't nearly as collectable as a 28-2. I would do a straight trade any day of the week on my 29-3 for a like condition 28-2. Heck, that 29-3 may still be in need of the endurance package upgrade. I know mine is and I don't shoot anything hot in it to make sure it doesn't start shooting loose on me. GO GET THAT 28-2!!!!
Reply With Quote
  #13  
Old 06-21-2011, 09:34 AM
jimmyjoe's Avatar
jimmyjoe jimmyjoe is offline
Member
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Oct 2003
Location: San Antonio, Texas, USA
Posts: 838
Likes: 9
Liked 414 Times in 82 Posts
Default

I would be looking at the 28-2. Cheaper to shoot. 38/357
Reply With Quote
  #14  
Old 06-21-2011, 11:14 AM
A320graham's Avatar
A320graham A320graham is offline
Member
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Aug 2010
Location: Sunny SW Florida
Posts: 146
Likes: 3
Liked 4 Times in 4 Posts
Question 28-2

:
Don't know what to do!!
Today is the day.
Hang on.... Endurance Package Upgrade!!
Does the 28-2 require one of those?

Last edited by A320graham; 06-21-2011 at 11:19 AM. Reason: typo
Reply With Quote
  #15  
Old 06-21-2011, 11:27 AM
oldgun oldgun is offline
Member
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Dec 2010
Posts: 26
Likes: 0
Liked 0 Times in 0 Posts
Default

Quote:
Originally Posted by A320graham View Post
:
Don't know what to do!!
Today is the day.
Hang on.... Endurance Package Upgrade!!
Does the 28-2 require one of those?
Probably not. The 28-2 is my recommendation, if it's still available at that price. By the way, I've recently acquired a 28-2, and it is a mighty fine shooter.
Reply With Quote
  #16  
Old 06-21-2011, 11:33 AM
A320graham's Avatar
A320graham A320graham is offline
Member
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Aug 2010
Location: Sunny SW Florida
Posts: 146
Likes: 3
Liked 4 Times in 4 Posts
Default 28-2

Just read up on the EPU.
Suppose the 28-2 looks favourite.
Noticed the 29 has a nice visual front and rear sight.
Any method for the 28? besides white out.
Reply With Quote
  #17  
Old 06-21-2011, 12:00 PM
alde's Avatar
alde alde is offline
Member
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Apr 2005
Location: Western WA
Posts: 3,165
Likes: 3,819
Liked 3,347 Times in 1,395 Posts
Default

I got my first 4" 28-2 a couple of weeks ago and shot it for the first time Sunday. What a fantastic shooter it is. I have a couple of 629's (stainless 29's) and they spend most of the time in the safe. The 28-2 is way more fun to shoot and is super accurate. I would go for the 28-2.

As far as the sights go, the rear blade can be changed for a white outline and the front sight can be colored orange to look like the front sight on the 29. Most people use nail polish or hobby paint. They can be touched up as needed and work very well. I have it on the front sight of my 28-2.
__________________
AL
Pax Per Potens
Reply With Quote
  #18  
Old 06-21-2011, 01:55 PM
JP@AK's Avatar
JP@AK JP@AK is offline
US Veteran
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Mar 2011
Location: Palmer, Alaska
Posts: 14,479
Likes: 5,113
Liked 18,984 Times in 6,864 Posts
Default

Quote:
Originally Posted by A320graham View Post
Any method for the 28? besides white out.
Yes. Red or Yellow (your preference) nail polish. It endures and is easily removed the same way our wives remove it from their nails - chemicals in a bottle!
Cheers.
JP
Reply With Quote
  #19  
Old 06-21-2011, 01:57 PM
JP@AK's Avatar
JP@AK JP@AK is offline
US Veteran
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Mar 2011
Location: Palmer, Alaska
Posts: 14,479
Likes: 5,113
Liked 18,984 Times in 6,864 Posts
Default

Quote:
Originally Posted by A320graham View Post
Suppose the 28-2 looks favourite.
You won't be sorry.
JP
Reply With Quote
  #20  
Old 06-21-2011, 04:52 PM
Ironhand Ironhand is offline
Member
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Feb 2011
Posts: 550
Likes: 5
Liked 75 Times in 50 Posts
Default







Another nudge in the right direction. This is my '66-67 28-2.
Reply With Quote
  #21  
Old 06-21-2011, 04:56 PM
Fishslayer Fishslayer is offline
US Veteran
Absent Comrade
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Jan 2010
Location: San Diego, PRK
Posts: 9,238
Likes: 11,531
Liked 11,249 Times in 3,916 Posts
Default

28-2 was my second wheelgun & first (but not last) S&W. Be warned. You may be starting a $eriou$ addiction.

If you get the 28-2 I seriously doubt you'll be sorry.
Reply With Quote
  #22  
Old 06-24-2011, 09:42 AM
A320graham's Avatar
A320graham A320graham is offline
Member
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Aug 2010
Location: Sunny SW Florida
Posts: 146
Likes: 3
Liked 4 Times in 4 Posts
Default 28-2

She's mine.
The 28-2 that is,
More than I thought $500 out the door I misread the tag D'OH.
Oh well
Photo's soon had to put it on layaway due unexpected car repair.

But here is a photo of her 1st cousin


Last edited by A320graham; 06-24-2011 at 10:09 AM. Reason: typo
Reply With Quote
  #23  
Old 06-24-2011, 12:22 PM
jlab73's Avatar
jlab73 jlab73 is offline
Member
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Jun 2011
Location: akron ,ohio
Posts: 1
Likes: 0
Liked 0 Times in 0 Posts
Default 28-2 great shooting gun

my 28-2 shoot like a champ every time it was worth every dime ,

Last edited by jlab73; 06-24-2011 at 12:29 PM.
Reply With Quote
  #24  
Old 07-02-2011, 09:28 PM
A320graham's Avatar
A320graham A320graham is offline
Member
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Aug 2010
Location: Sunny SW Florida
Posts: 146
Likes: 3
Liked 4 Times in 4 Posts
Unhappy 28-2

Picked up the Highwayman today at 10 AM had it broken by 1130AM.
Took it apart as per the AGI video cleaned it and put it 95% back together when the Hammer Sear Spring escaped into the living room.
It's still AWOL now.
Will phone S&W on Tuesday for another one.

Happy 4th from a Limey!!
Reply With Quote
  #25  
Old 07-03-2011, 06:36 PM
toddimusnimski's Avatar
toddimusnimski toddimusnimski is offline
Member
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Mar 2009
Location: Western WA
Posts: 1,016
Likes: 586
Liked 741 Times in 354 Posts
Default

Mostly you won't need to go to that level of disassembly for cleaning. More than a few of us have buggered-up sideplate screws from that. Plus, you're less likely to lose parts! Good thing S&W has good customer service.

Look up the Washington Arms Collectors online and try to make one of their monthly gunshows at the Puyallup fairgrounds. It's a big show with lots of Smiths.

Todd

Last edited by toddimusnimski; 07-04-2011 at 11:44 AM. Reason: aded info
Reply With Quote
  #26  
Old 07-03-2011, 07:46 PM
MAG-NUM's Avatar
MAG-NUM MAG-NUM is offline
Member
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Feb 2010
Location: Western PA
Posts: 600
Likes: 1,833
Liked 809 Times in 114 Posts
Default

I would have to agree with JP and say that I have a lot more fun shooting .38's than I do the .44 mags and they are cheaper to shoot. I say go with the HP to start. Bob
Reply With Quote
  #27  
Old 07-03-2011, 11:02 PM
JCS&W's Avatar
JCS&W JCS&W is offline
US Veteran
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Jan 2011
Location: Jonesboro, GA
Posts: 2,198
Likes: 1,769
Liked 1,581 Times in 447 Posts
Default

In my humble opinion, you made the correct choice by choosing the M28-2. Great weapon and getting ridiculously expensive. Here is my 4" 1969 version. There will be other Smiths in your house!

Reply With Quote
  #28  
Old 07-03-2011, 11:46 PM
rhetlaw rhetlaw is offline
Member
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Mar 2011
Location: NE PA
Posts: 186
Likes: 29
Liked 4 Times in 4 Posts
Default

Graham, so glad you decided to pick up the 28-2. My 28,4", no dash was my latest purchase. One thing I love about the S&W's is there high polish blue finish. Although this revolver does not have the finish I like, there is something about it that I love. It feels just perfect in my hand. At the range I do put .357's through it, but I also put .38 specials through it as a cost saving method. I know you're going to love it.
Reply With Quote
  #29  
Old 07-04-2011, 11:49 AM
A320graham's Avatar
A320graham A320graham is offline
Member
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Aug 2010
Location: Sunny SW Florida
Posts: 146
Likes: 3
Liked 4 Times in 4 Posts
Default 28-2

Here she is I found the sear spring yesterday afternoon and put it back together.
Nice or What!!!!




Last edited by A320graham; 07-04-2011 at 11:51 AM. Reason: yes
Reply With Quote
  #30  
Old 07-05-2011, 07:18 PM
sheldon wade's Avatar
sheldon wade sheldon wade is offline
Member
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Mar 2005
Location: pensacola florida
Posts: 101
Likes: 9
Liked 117 Times in 30 Posts
Default my model 28-2

i picked this one up at the pensacola, florida gunshow on the 25th of june in the original box for $400.00 out the door. she shoots like a dream and has been taken over by the mrs. she's happy and so am i. it is a 28-2
bhk308
__________________
9-11-01 lest we forget amen
Reply With Quote
  #31  
Old 07-05-2011, 10:49 PM
JCS&W's Avatar
JCS&W JCS&W is offline
US Veteran
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Jan 2011
Location: Jonesboro, GA
Posts: 2,198
Likes: 1,769
Liked 1,581 Times in 447 Posts
Default

Beautiful A320, just beautiful! Congrats on the purchase!
Reply With Quote
  #32  
Old 07-07-2011, 12:10 AM
WVfishguy's Avatar
WVfishguy WVfishguy is offline
Member
S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2 S&W 28-2  
Join Date: Aug 2008
Posts: 445
Likes: 12
Liked 47 Times in 17 Posts
Default

Welcome to the U.S., A320graham!
You have just purchased one of the finest weapons ever produced. If you take care of it, it will outlive you. It's great that you have the original grip.
However, I'd stop taking the side plate off. It's not really a good idea.

Your next step should loading your own ammo. It would be great if you could find someone with experience to help you get started.
Loading you own ammo increases the fun of hand gun shooting ten-fold, especially with the .357; this round has 101 variations, and you can shoot everything from 110 to 190 grain loads, jacketed or lead bullets, and so on. It's really a lot of fun.
__________________
NRA Lifetime Member
Reply With Quote
Reply

Tags
357 magnum, 44 magnum, 629, endurance, highway patrolman, k-frame, lock, m28, model 15, model 28, model 29, pachmayr, patrolman, recessed, s&w, sideplate, sig arms

Thread Tools
Display Modes

Posting Rules
Forum Jump

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 10:20 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)