|
|
07-04-2014, 10:14 PM
|
Member
|
|
|
Join Date: Jul 2012
Posts: 164
Likes: 2
Liked 70 Times in 21 Posts
|
|
What wadcutters?
What S&W revolvers and semi-autos are chambered to accept true wadcutter type bullets?
|
07-04-2014, 10:21 PM
|
Member
|
|
|
Join Date: Jun 2014
Location: Bainbridge GA
Posts: 1,200
Likes: 1,632
Liked 606 Times in 385 Posts
|
|
The M52 is a wadcutter target pistol. Most calibers of revolvers can use wadcutters.
|
07-04-2014, 10:38 PM
|
Banned
|
|
|
Join Date: Jul 2013
Location: PA
Posts: 2,081
Likes: 3,653
Liked 2,255 Times in 750 Posts
|
|
The question should be which revolver can only shoot (flush)wascutters and the answer is the model 52. There probably are more but I don't know which. Any .38 or .357 caliber revolver can fire wadcutters.
Last edited by MrTrolleyguy; 07-04-2014 at 10:40 PM.
|
07-05-2014, 06:43 AM
|
Member
|
|
|
Join Date: Jul 2010
Location: Central VA
Posts: 8,660
Likes: 1,571
Liked 9,429 Times in 4,226 Posts
|
|
Twenty five years or so ago a couple of custom gunsmiths were building competition revolvers with shortened cylinders and elongated barrel tenons so that only wadcutters could be fired in them. The theory was that the bullet had no freebore... it was still in the case within the cylinder as it was entering the forcing cone, so it aligned perfectly with the bore. I'm not aware of any factory built revolver from S&W so designed.
Otherwise, we are back to semi-autos, of which there is only one, the exquisite Model 52. But that has already been mentioned.
Froggie
|
The Following User Likes This Post:
|
|
07-05-2014, 10:38 AM
|
Member
|
|
|
Join Date: Jul 2012
Posts: 164
Likes: 2
Liked 70 Times in 21 Posts
|
|
Very interesting replies. Of course I knew about the 52. It's on the top of my list of next guns to buy. What I was having difficulty in determining was 1) are there any more eligible semi-auto wadcutters? and 2) what revolvers if any are capable of shooting wadcutters?
As for semi-autos I understand that S&W only made the 52. Correct? I understand that the other manufacturers are divided between the European .32s and the Colt .38 Special. Correct?
As for revolvers I now understand that ALL are capable of shooting wadcutters. Correct? That would make sense if the charge didn't exceed the gun's limitations. Interesting comment on free bore and the idea of limiting it for wadcutters.
I've been target shooting with a bullseye group lately, which is the reason for asking these questions about wadcutters. You can't help but be impressed with the holes they make on paper. It's been interesting discovering the guns used in the sport. The 22lr has obviously received the bulk of attention and refinement. The designs offered are astounding and interesting. On the other end of that spectrum is the tried and true 1911, which seems to dominate .45 caliber. I still can't understand why there isn't development similar to the .22lr. I realize there are many creative tweaks to the 1911 but I've seen nothing in comparison to the .22lr. I also don't understand why the ubiquitous 9mm is almost totally ignored in centerfire, an event where the 1911 .45 ACP also dominates. And why in this same event .32 isn't more common, at least here in this country.
|
07-05-2014, 10:49 AM
|
|
Member
|
|
|
Join Date: Nov 2008
Posts: 1,307
Likes: 23
Liked 613 Times in 244 Posts
|
|
The .45 rules the centerfire portion of bullseye for several reasons. You only need two guns to shoot the entire 2700 match since the .45 can be used for the centerfire portion and .45 portion. So you only need to own, maintain and become proficient with two guns; the .45 and the .22. Second, the .45 makes a bigger hole and this is more likely to be touching the next highest scoring ring.
|
The Following 2 Users Like Post:
|
|
07-05-2014, 10:57 AM
|
|
US Veteran
|
|
|
Join Date: Feb 2009
Location: SE Mich - O/S Detroit
Posts: 3,159
Likes: 2,026
Liked 2,801 Times in 1,017 Posts
|
|
Quote:
Originally Posted by Beeser
...
As for semi-autos I understand that S&W only made the 52. Correct? I understand that the other manufacturers are divided between the European .32s and the Colt .38 Special. Correct?...
|
Colt produced a 1911 in the late 1960's, early 1970's, chambered for the .38 Special wad cutter. There weren't a lot produced, but I've seen them, held them, and drooled all over them. They're still for sale, but expect to pay over $1.5k for one, even in so-so shape.
There was also a .38 AMU (Army Marksmanship Unit) round, for which Colt and S&W made semiautomatic pistols. Those are even more rare.
|
07-05-2014, 10:59 AM
|
Member
|
|
|
Join Date: Dec 2010
Location: Dallas
Posts: 701
Likes: 3
Liked 356 Times in 212 Posts
|
|
Colt also made a 38 wadcutter semi auto. It was a 1911 model chambered for that round. I don't know the time frame when they were made but I'm guessing they overlapped with the 52. Don't know which one came first but shouldn't be too hard to figure out.
|
07-05-2014, 11:00 AM
|
|
Member
|
|
|
Join Date: May 2008
Location: Washington State
Posts: 7,475
Likes: 14,587
Liked 9,314 Times in 3,723 Posts
|
|
As a general rule, revolvers can chamber pretty much any bullet shape that is not too long for the cylinder. And most if not all WC loads are pretty mild, as they do not need a lot of velocity to achieve the target shooting mission.
__________________
NHI, 10-8.
|
The Following User Likes This Post:
|
|
07-05-2014, 11:12 AM
|
|
US Veteran
|
|
|
Join Date: Sep 2006
Location: Occupied Colorado
Posts: 922
Likes: 45
Liked 753 Times in 344 Posts
|
|
Semi-wadcutters will make the same nice round hole, but the tapered nose will feed in a lot of semi-autos.
__________________
Fight socialism. Never stop.
|
07-05-2014, 11:35 AM
|
Member
|
|
|
Join Date: Aug 2003
Location: Michigan
Posts: 57
Likes: 11
Liked 16 Times in 9 Posts
|
|
I have a .38 Special Colt Mark III Gold Cup chambered for .38 flush-seated wadcutters. Great fun to shoot. Differs from the usual 1911 in that it's a blow-back, not short recoil action.
Bill
|
The Following User Likes This Post:
|
|
07-05-2014, 11:48 AM
|
|
US Veteran
|
|
|
Join Date: Aug 2006
Location: West Central IL
Posts: 22,808
Likes: 18,558
Liked 22,427 Times in 8,278 Posts
|
|
All revolvers of .38 Special caliber can chamber and shoot 38 WC ammo, as it is shorter than any other 38 Special ammo. As mentioned, there are some custom revolvers that are the opposite, you can shoot "only" 38 WC as RN or SWC would be too long. Factory issue S&W will all chamber WC ammo.
__________________
H Richard
SWCA1967 SWHF244
|
07-05-2014, 11:59 AM
|
Member
|
|
|
Join Date: Jul 2012
Posts: 164
Likes: 2
Liked 70 Times in 21 Posts
|
|
I've seen a couple of Colt 1911s chambered for .38 Special. Are they all, unlike the S&W 52, capable of also firing wadcutters? Also, is the Colt Mark III Gold Cup that member Bill A mentioned typical of all Colt 1911s in that they are of the blow-back design?
|
07-05-2014, 12:30 PM
|
Member
|
|
|
Join Date: Oct 2005
Location: Pensacola,FL
Posts: 1,720
Likes: 4,198
Liked 999 Times in 536 Posts
|
|
The Colt factory 1911 in 38 special is not accurate enough for Bullseye . Master Pistolsmiths such as the late Jim Clark , John Giles & others made 38 special conversions on the 1911 platform & can be competitive . Factory target auto's like the S&W 52 & Sig P240 in 38 can also be accurate enough . Many Euro target pistols in 32 S&W Long can also be used , but do to being designed for 25 meter Int'l shooting really need a faster twist barrel for 50yd accuracy . All the above are designed to only shoot full wadcutter rounds . If you're serious about Bullseye get the best 22 you can afford & a 1911 45acp reworked by a dedicated Bullseye 'smith . Master them before you go off on tangents like 38 or 32 .
|
The Following User Likes This Post:
|
|
07-05-2014, 01:02 PM
|
Member
|
|
|
Join Date: Aug 2003
Location: Michigan
Posts: 57
Likes: 11
Liked 16 Times in 9 Posts
|
|
Quote:
Originally Posted by Beeser
I've seen a couple of Colt 1911s chambered for .38 Special. Are they all, unlike the S&W 52, capable of also firing wadcutters? Also, is the Colt Mark III Gold Cup that member Bill A mentioned typical of all Colt 1911s in that they are of the blow-back design?
|
Yes, they are all blow-back and they will only chamber flush-seated wadcutters. As far as bullseye CF is concerned, you will wax most of the .45 guys if you are shooting the indoor match (50 foot) with either a .38 auto like the 52 or Clark conversion or .38 Gold Cup, or, better yet, a .32. Of course you will have to suffer the humiliation of shooting a "wimp gun" (.38 WC), or "super wimp gun" (.32 S&W Long WC).
Bill
Last edited by Bill A; 07-05-2014 at 01:06 PM.
|
07-05-2014, 01:27 PM
|
Member
|
|
|
Join Date: May 2004
Location: Iowa
Posts: 4,106
Likes: 14,444
Liked 3,763 Times in 1,784 Posts
|
|
The .32 wadcutter revolvers in the US suffer from making a small hole in Bullseye shooting. Larger diameter bullets like .38 WC and 45s are much more helpful in cutting the higher scoring ring. That's probably why S&W K32 Masterpieces are so few in number.
I own a Colt .38 Mid-range semi-auto the just refuses to feed full wadcutter ammo.....guess that's why previous owners sold it.
__________________
Bob.
SWCA 1821
|
07-05-2014, 01:45 PM
|
Absent Comrade
|
|
|
Join Date: Jan 2011
Location: Planet earth
Posts: 13,869
Likes: 2,079
Liked 13,354 Times in 5,549 Posts
|
|
Does the 38 super also shoot wad cutters?
|
07-05-2014, 02:54 PM
|
Member
|
|
|
Join Date: Aug 2003
Location: Michigan
Posts: 57
Likes: 11
Liked 16 Times in 9 Posts
|
|
Quote:
Originally Posted by S&WIowegan
The .32 wadcutter revolvers in the US suffer from making a small hole in Bullseye shooting. Larger diameter bullets like .38 WC and 45s are much more helpful in cutting the higher scoring ring. That's probably why S&W K32 Masterpieces are so few in number.
I own a Colt .38 Mid-range semi-auto the just refuses to feed full wadcutter ammo.....guess that's why previous owners sold it.
|
I disagree; the lighter recoil of the .32 more than makes up for the smaller holes.
IMO the unpopularity of the K32 had nothing to do with bullseye; most "target" revolvers, i.e., those with adjustable sights, are bought for general use, and the .32 S&W Long is not a versatile cartridge, unlike the .38.
You should have seen me wipe the place up with my Unique DES 32 in my indoor CF league when I shot against those guys making big holes with their .45's!
Sorry to hear about your Colt .38 problems. I have never, and I mean never, had a malfunction with mine. You might want to check the springs.
Regards,
Bill
|
The Following 2 Users Like Post:
|
|
07-05-2014, 03:27 PM
|
|
Member
|
|
|
Join Date: May 2003
Posts: 471
Likes: 222
Liked 550 Times in 210 Posts
|
|
Quote:
Originally Posted by BigBill
Does the 38 super also shoot wad cutters?
|
If you are talking about auto pistols, my educated guess is yes--for the first shot, then the rest of the rounds would jam.
I've reloaded many rounds of Super .38, but have never contemplated using wadcutter bullets--nor do I ever intend to do so. My first thought was that the bullet might bulge the case, which could impede smooth chambering. If that were not an issue, I'd anticipate frequent jams--perhaps every round--unless a skilled pistolsmith throated the pistol to feed the blunt bullet--assuming that's even possible. If someone has successfully used wadcutter bullets in a Super .38 auto, I hope they respond.
If I wanted to shoot target loads in a Super 38, I'd use bullets designed to feed in a self-loading pistol, light powder charges, and perhaps a reduced power recoil spring.
I suppose wadcutter bullets might be loaded in Super .38 brass for use in revolvers--I know the .357 will chamber the Super .38 round. I see absolutely no point in doing this; I only mention it because Big Bill didn't specify pistol or revolver.
Last edited by El Biblioitecario; 07-06-2014 at 12:00 PM.
|
07-05-2014, 04:45 PM
|
Member
|
|
|
Join Date: Jul 2012
Posts: 164
Likes: 2
Liked 70 Times in 21 Posts
|
|
Quote:
Originally Posted by boatbum101
....If you're serious about Bullseye get the best 22 you can afford & a 1911 45acp reworked by a dedicated Bullseye 'smith . Master them before you go off on tangents like 38 or 32 .
|
Makes a lot of sense in many respects and I believe good advice. However, my enjoyment in Bullseye is not limited to the results on the score card. I also get a kick out of the learning process, acquiring new guns and trying something new. I've purchased 2- Model 41s and a Pardini SP for my 22.r efforts. I'm convinced that all of them are capable of shooting better than my current capabilities but it doesn't prevent me from looking at other 22lr pistols. There's just too many interesting designs out there to ignore. I'm somewhat convinced that in the hands of an accomplished shooter a properly configured 1911 chambered in .45 ACP is just as accurate as any of the lesser caliber pistols. And it makes sense to use this type of pistol for two of the Bullseye legs. However, I find it more interesting and maybe challenging to explore other pistol designs. As I said before, it amazes me that centerfire and .45 have settled so deeply in the 1911 platform.
|
The Following User Likes This Post:
|
|
07-07-2014, 01:11 PM
|
Member
|
|
|
Join Date: Oct 2005
Location: Pensacola,FL
Posts: 1,720
Likes: 4,198
Liked 999 Times in 536 Posts
|
|
If you want to use the same for all 3 legs shoot a 22 conversion ( Marvel , Advantage Arms , Kart , Dworvak or Nelson ) on a 1911 lower . Set trigger up the same as your 45 wadgun ie 3 1/2 lbs . Your 22 scores will suffer at first , but once you have decent trigger control it'll help your 45 scores tremendously . Think about it same grip , same trigger , same sights , same weight etc etc . It aint all about the scorecard neither . Worry about solid execution of the fundamentals . Score will take care of itself . Once you shoot Master scores then you can play around as you know what makes a good shot . I too agree there's many interesting pistol out there . I've a weakness for High Standard 106 - 107's made in Hamden , Ct .
|
The Following User Likes This Post:
|
|
|
Posting Rules
|
|
|
|
Similar Threads
|
Thread |
Thread Starter |
Forum |
Replies |
Last Post |
44 Wadcutters
|
Drm50 |
Reloading |
25 |
11-27-2016 09:47 AM |
.38 wadcutters in a .357
|
wader4 |
S&W Revolvers: 1980 to the Present |
20 |
01-06-2015 01:44 AM |
Wadcutters
|
tommy F |
Reloading |
13 |
02-08-2012 01:48 PM |
Wadcutters
|
ncbengal |
Reloading |
13 |
08-24-2011 03:13 PM |
45 wadcutters
|
marc257 |
Reloading |
12 |
05-19-2010 10:42 PM |
|