Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Revolvers > S&W Revolvers: 1961 to 1980
o

Notices

S&W Revolvers: 1961 to 1980 3-Screw PINNED Barrel SWING-OUT Cylinder Hand Ejectors WITH Model Numbers


Reply
 
Thread Tools Display Modes
  #1  
Old 12-11-2016, 01:16 PM
shinbone shinbone is offline
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Dec 2015
Posts: 131
Likes: 5
Liked 225 Times in 63 Posts
Default M66 - which engineering # for the best shooter?

I am looking for a .357 magnum revolver to carry while I am hunting. The gun would be carried in addition to the rifle or shotgun I would be hunting with, i.e. a lot of carry and a little bit of shooting, which steers me away from the N-frame guns from this application. I've got a bunch of 686 models with half-lug 4" barrels that I like, but . . . I want a 6" barrel gun and I strongly dislike the full underlug the 6" 686's always seem to have. This seems to be leading me to a M66 as my only option. I would love to have a 686 6" with half-lug barrel, but, sadly, I don't think S&W has ever made such a gun. Also, for aesthetic reasons, I am not interested in any models with the internal lock when a non-IL version is available.

For a M66 for shooting (i.e. not collecting), which engineering change is the best shooter model of M66?

TIA

--shinbone

Last edited by shinbone; 12-11-2016 at 03:20 PM.
Reply With Quote
  #2  
Old 12-11-2016, 01:34 PM
srsmyth's Avatar
srsmyth srsmyth is offline
SWCA Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Feb 2010
Location: Minnesota
Posts: 838
Likes: 1,518
Liked 535 Times in 260 Posts
Default

You're probably going to be limited to what dash number you will find in a 6" model 66, they don't show up for sale that often and I don't think it would matter much. Dash 0,1,2 probably will all be great revolvers, buy whatever decent one you can find.
All my 66's are great guns.
__________________
Birds like shiny new toys too.
Reply With Quote
  #3  
Old 12-11-2016, 02:52 PM
Alk8944's Avatar
Alk8944 Alk8944 is offline
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Jan 2007
Location: Sandy Utah
Posts: 8,617
Likes: 1,554
Liked 8,619 Times in 3,453 Posts
Default

Take whatever you can find, the dash number means nothing when it comes to shooting quality. All engineering changes are made for one of two reasons, simplifying production/cost cutting and improving durability, nothing more.

Shootability from an accuracy standpoint is strictly how well an individual gun matches up to the ideal combination of parts and how they relate to each other. Differences of less than .001" can make the difference between a tack-driver and a gun that won't shoot in a bucket. The reality is quality revolvers in general, as a rule shoot far better than they have any right to, and far better than most shooters are capable, even very good ones!
__________________
Gunsmithing since 1961
Reply With Quote
The Following 2 Users Like Post:
  #4  
Old 12-11-2016, 03:05 PM
sodacan sodacan is offline
Member
 
Join Date: Feb 2006
Posts: 3,415
Likes: 1,100
Liked 5,123 Times in 1,572 Posts
Default

Model 27 or 28. What's not to like?
Reply With Quote
The Following User Likes This Post:
  #5  
Old 12-11-2016, 03:13 PM
shinbone shinbone is offline
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Dec 2015
Posts: 131
Likes: 5
Liked 225 Times in 63 Posts
Default

Quote:
Originally Posted by sodacan View Post
Model 27 or 28. What's not to like?
Great guns, and I love me the N-frame - feels good in the hand and shoot so nice, but I am looking for something smaller than an N-frame for the "carry a lot, shoot a little" aspect. I also prefer SS for this application for the lower maintenance aspect. I edited my original to clarify this.

Last edited by shinbone; 12-11-2016 at 03:41 PM.
Reply With Quote
The Following User Likes This Post:
  #6  
Old 12-11-2016, 03:24 PM
shinbone shinbone is offline
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Dec 2015
Posts: 131
Likes: 5
Liked 225 Times in 63 Posts
Default

Quote:
Originally Posted by Alk8944 View Post
All engineering changes are made for one of two reasons, simplifying production/cost cutting and improving durability, nothing more.
Good point! Which dash-number in the M66, short of a version with an IL, would be the most durable?
Reply With Quote
The Following User Likes This Post:
  #7  
Old 12-11-2016, 03:28 PM
Muss Muggins's Avatar
Muss Muggins Muss Muggins is offline
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Mar 2014
Location: bootheel of Missouri
Posts: 16,855
Likes: 6,981
Liked 28,085 Times in 8,897 Posts
Default

Quote:
Originally Posted by shinbone View Post
Good point! Which dash-number in the M66, short of a version with an IL, would be the most durable?
Doesn't matter. They all shoot better than I do, and will probably last longer . . .
__________________
Wisdom comes thru fear . . .
Reply With Quote
The Following 3 Users Like Post:
  #8  
Old 12-11-2016, 03:47 PM
BAM-BAM BAM-BAM is online now
Member
 
Join Date: Oct 2005
Location: A Burb of the Burgh
Posts: 14,749
Likes: 1,616
Liked 19,850 Times in 8,772 Posts
Default

Pinned and Recessed are

Model 66: no-dash and -1s.................

Model 19 no-dash through -4s..............

might be easier to find a 6" 19 than 66.



SS/66s are easier to maintain when carrying in the woods.........

If it's not your primary hunting gun ....... I'd go with a 4 or 2 1/2" for ease of carry.........................

Last edited by BAM-BAM; 12-11-2016 at 03:49 PM.
Reply With Quote
The Following 2 Users Like Post:
  #9  
Old 12-11-2016, 06:11 PM
Alk8944's Avatar
Alk8944 Alk8944 is offline
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Jan 2007
Location: Sandy Utah
Posts: 8,617
Likes: 1,554
Liked 8,619 Times in 3,453 Posts
Default

Quote:
Originally Posted by shinbone View Post
Good point! Which dash-number in the M66, short of a version with an IL, would be the most durable?
For aesthetics, the last pinned & recessed model, 66-1. for having all up-grades that mean something. the 66-5.
__________________
Gunsmithing since 1961
Reply With Quote
The Following User Likes This Post:
  #10  
Old 12-11-2016, 08:17 PM
bdGreen bdGreen is offline
SWCA Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Jan 2005
Posts: 2,505
Likes: 1,817
Liked 13,532 Times in 1,710 Posts
Default

There is a Model 686 Mountain Gun currently for sale in the classifieds on this forum. That is what you need to check out.
bdGreen
Reply With Quote
The Following User Likes This Post:
  #11  
Old 12-11-2016, 08:24 PM
Arik Arik is offline
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Jan 2012
Location: Outside Philadelphia Pa
Posts: 16,601
Likes: 7,342
Liked 17,200 Times in 7,303 Posts
Default

From a shooting and carrying standpoint it doesn't matter

Sent from my XT1650 using Tapatalk
Reply With Quote
The Following User Likes This Post:
  #12  
Old 12-11-2016, 08:38 PM
shinbone shinbone is offline
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Dec 2015
Posts: 131
Likes: 5
Liked 225 Times in 63 Posts
Default

Quote:
Originally Posted by bdGreen View Post
There is a Model 686 Mountain Gun currently for sale in the classifieds on this forum. That is what you need to check out.
bdGreen
Thanks for the tip on the gun for sale, and I know those are not that easy to find. Luckily, I already have a 686-5 Mountain Gun. I was shooting it yesterday, and it is a great gun. It is the best of the 4" barrel .357 guns, IMHO. For the sake of completeness, in 4" barreled .357's, I have a 19-3, a 620, the already mentioned 686-5 MG, and a 627-5. All very sweet guns.

But, I am wanting to try a 6" barrel without a full lug.

Last edited by shinbone; 12-11-2016 at 09:48 PM.
Reply With Quote
The Following User Likes This Post:
  #13  
Old 01-05-2017, 08:56 AM
shinbone shinbone is offline
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Dec 2015
Posts: 131
Likes: 5
Liked 225 Times in 63 Posts
Default

I am still looking for a shooter grade M66 with 6" barrel, but . . .

Anyone have any experience with the relatively new M66-8 (4.25" barrel)? The few reports I have heard are saying the two-piece barrel is shooting some impressively tight groups . . . ?
Reply With Quote
  #14  
Old 01-05-2017, 09:33 AM
shocker's Avatar
shocker shocker is offline
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Dec 2012
Location: Michigan
Posts: 1,482
Likes: 550
Liked 1,427 Times in 666 Posts
Default

Quote:
Originally Posted by shinbone View Post
I am still looking for a shooter grade M66 with 6" barrel, but . . .

Anyone have any experience with the relatively new M66-8 (4.25" barrel)? The few reports I have heard are saying the two-piece barrel is shooting some impressively tight groups . . . ?
At least the 66-8 has the full diameter forcing cone - eliminating one weakness of the older guns. As far as accuracy unless you are an Olympic shooter I don't think you would test the limits of 2 piece barrel accuracy unless you clamp the gun in a rest.

This being the year 2017, I might point out the alternate technology would be something like a Glock 20. 10 MM punch in a gun that's 10 ounces lighter but still very shootable. I know, blasphemy.

Last edited by shocker; 01-05-2017 at 02:37 PM.
Reply With Quote
The Following User Likes This Post:
  #15  
Old 01-05-2017, 09:39 AM
steamloco76's Avatar
steamloco76 steamloco76 is offline
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Dec 2010
Location: Western Pennsylvania
Posts: 3,676
Likes: 1,769
Liked 3,702 Times in 1,242 Posts
Default

I'm going to be a heretic and suggest the Ruger Security-Six with the 6 inch barrel. They can be found for $450 or so, are great shooters and are more common in 6 inch than the Model 66.
__________________
Virtue,Liberty & Independence
Reply With Quote
  #16  
Old 01-05-2017, 09:42 AM
shinbone shinbone is offline
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Dec 2015
Posts: 131
Likes: 5
Liked 225 Times in 63 Posts
Default

Thanks for the alternate suggestions, and, no doubt, each has its merits, but I prefer to stick with S&W, even with the many other valid options out there.

Last edited by shinbone; 01-05-2017 at 09:51 AM.
Reply With Quote
The Following User Likes This Post:
  #17  
Old 01-05-2017, 11:14 AM
Texas Star Texas Star is offline
US Veteran
Absent Comrade
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Mar 2005
Location: Texas
Posts: 20,362
Likes: 24,260
Liked 16,154 Times in 7,408 Posts
Default

M-66-3. Probably -4's are good, too. But they added the endurance package in the yoke assembly at M-66-3. Mine has been a superb gun, the one I've carried most over the past 26 years.


It has a four-inch barrel, but I've owned a six-inch M-19 and think you're on the right track. The stainless gun is the better choice in the real world.


Jeff Cooper was best known for advocating the .45 auto, but he liked some revolvers, too, and commented that the six-inch Combat Magnum was a fine combo of power and portability. He liked it as a trail gun for hikers and backpackers.
Reply With Quote
The Following User Likes This Post:
  #18  
Old 01-05-2017, 11:22 AM
reddog81 reddog81 is online now
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Sep 2014
Location: IA
Posts: 1,716
Likes: 973
Liked 1,619 Times in 794 Posts
Default

Older 66's aren't too hard to find but you'll see many 4" barrel before finding anything else. You can find the model 19 with a 6" barrel occasionally but a 6" model 66 is rare. You will probably have to pay a premium for the 6" due to the rarity.
Reply With Quote
  #19  
Old 01-05-2017, 12:50 PM
Green Frog Green Frog is offline
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Jul 2010
Location: Central VA
Posts: 8,598
Likes: 1,551
Liked 9,325 Times in 4,182 Posts
Default

Quote:
Originally Posted by Alk8944 View Post
For aesthetics, the last pinned & recessed model, 66-1. for having all up-grades that mean something. the 66-5.
^^^ This ^^^

I had an early Model 66 no dash (police trade-in, 4" bbl) that I rebuilt and had retro-fitted with a factory 6" barrel. After much use and abuse it has now been resurrected as a 4" full under lug 327 Fed Mag (See my Project 616) but it was a fine range gun. If I were to replace it now, I would have a Model 66-1 that would IMHO retains all of the good features of the no-dash, with the most glaring manufacturing shortcomings addressed. As you have seen from preceding answers here, all of the dash numbers work fine, and so long as an individual example has a minimum of features that you personally dislike, it would be hard to go wrong with any of the Model 66 manufacturing variations. You asked for a recommendation though, so I vote for the dash 1.

Froggie
Reply With Quote
The Following 3 Users Like Post:
  #20  
Old 01-05-2017, 02:06 PM
BigMuddy BigMuddy is online now
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Apr 2010
Location: Linn Creek MO
Posts: 699
Likes: 1,007
Liked 994 Times in 423 Posts
Default

Shinbone did not ask for suggested guns for his needs/wants. He asked for suggestions on a "specific" gun. He obviously has other guns and knowledge about them. He even has guns that would serve the purpose stated, but he wants a 6" model 66!

So my answer is...-1 simply because I like P&R guns. They're not better, I just like them. I would not turn down a no dash unless it had SS sights. Those are for collecting, not shooting.

Good luck in your search. That is part of the fun too.

Dan
Reply With Quote
The Following User Likes This Post:
  #21  
Old 01-05-2017, 03:30 PM
Birdgun Birdgun is offline
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Oct 2016
Location: Marana, AZ
Posts: 628
Likes: 2,108
Liked 3,098 Times in 500 Posts
Default

Deleted. I unintentionally broke the rules. My apologies.

Last edited by Birdgun; 01-05-2017 at 04:38 PM.
Reply With Quote
  #22  
Old 01-05-2017, 04:13 PM
shinbone shinbone is offline
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Dec 2015
Posts: 131
Likes: 5
Liked 225 Times in 63 Posts
Default

Birdgun - Thanks for the head's-up. I've got some of those on my Watch List.

At this point, for a Model 66 with 6" barrel, I am looking for:

1) A 66 no dash, because the first version of anything has the most cachet; or

2) A 66-3 or a 66-4, to get the endurance package without the MIM parts or internal lock.

However, I'd probably take any dash version if it had target trigger and target hammer at a reasonable price. Nothing against MIM parts (meaning I wouldn't pass up a good deal on a 66-5), but, for later resale, most folks who care about MIM parts don't want them. And, as mentioned in my first post, no IL for me for aesthetic reasons. Although once the gun budge recovers after this purchase I may next pick up a 66-8.

Interestingly, I see by far more 66-2's out there than any other dash number.

Last edited by shinbone; 01-05-2017 at 04:20 PM.
Reply With Quote
  #23  
Old 01-05-2017, 05:05 PM
Tom_R's Avatar
Tom_R Tom_R is offline
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Jun 2013
Location: Connecticut
Posts: 2,024
Likes: 616
Liked 2,433 Times in 873 Posts
Default

Search Gun Broker for the lesser known 619 and 620.

L Frame guns with Half Lugs.
Reply With Quote
  #24  
Old 01-05-2017, 05:47 PM
shinbone shinbone is offline
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Dec 2015
Posts: 131
Likes: 5
Liked 225 Times in 63 Posts
Default

Quote:
Originally Posted by Tom_R View Post
Search Gun Broker for the lesser known 619 and 620.

L Frame guns with Half Lugs.
Thanks for the info. I've got a 620, and it is indeed a very nice gun. But, unfortunately, 620's never came with a 6" barrel.
Reply With Quote
  #25  
Old 01-05-2017, 06:53 PM
k22fan k22fan is offline
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Feb 2010
Posts: 5,835
Likes: 5,161
Liked 5,242 Times in 2,483 Posts
Default

Your most affordable alternative would be a 19-5. In 19s the dash 5 means elimination of recessed cylinders and barrel pins. Unwanted shooter grade 6" 19-5s are fairly common. My local gun stores price them at $425 plus tax.

6" 66s are a lot less common so they cost more. They were not a production item until after the silver colored stainless rear sights were discontinued so that is not an issue. Recessed chambers add a cleaning chore without adding anything of value to shooters and barrel pins were non-functional so let collectors pay the premium for P&R. Prior to the current 66-8 there was never an endurance package in K frames. Dash 3 improved the front side plate screw to the modern larger head screw with a spring loaded plunger keeping the yoke from moving forward in the frame. The next significant changes for shooters were drilling and tapping the top strap for optics which was accompanied by the dash number increasing to 4, then elimination of square butts during dash 4 production. Neither were good or bad for everyone. They are relevant if will you want to mount optics or like traditional square butts. Next came an important change that is seldom mentioned in collector books. Approximately 1997 square cornered lands and grooves cut with broachs were superseded by rounded corner lands and grooves made by eroding away metal with electricity. Whether it is as easy to find accurate lead bullet loads with the modern rifling remains controversial. Are you getting good results with cast bullets in your 620 and other modern S&Ws or will you only shoot jacketed bullets?

I hope this helped you pick a grail 6" 66.

Last edited by k22fan; 01-05-2017 at 07:01 PM.
Reply With Quote
  #26  
Old 01-06-2017, 12:22 AM
Texas Star Texas Star is offline
US Veteran
Absent Comrade
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Mar 2005
Location: Texas
Posts: 20,362
Likes: 24,260
Liked 16,154 Times in 7,408 Posts
Default

No one has mentioned the problems with an expanding gas ring tying up early M-66's. When writer Massad Ayoob blew the whistle on this, he was not too popular around S&W, but the revelation got us a revision that eliminated the problem.


I think it occurred only with .357 ammo. The heat of .38 cartridges didn't stall the cylinders rotating as they should. If your gun did jam with .38 ammo, please tell us here.


Bill Jordan told me in person that he envisioned using K-frame Magnums only some 10-15% of the time with full loads. And avoid hot loads with bullets of 125 grains or lighter. If you stay within these guidelines, a M-19, 66, etc. will last well.

Last edited by Texas Star; 01-06-2017 at 12:28 AM.
Reply With Quote
  #27  
Old 01-06-2017, 04:20 AM
BUFF BUFF is offline
SWCA Member
Absent Comrade
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Nov 2002
Location: SLC, Utah
Posts: 5,062
Likes: 739
Liked 3,271 Times in 1,282 Posts
Default

The 6 inch barrel option didn't come along until 1978, during the dash 1 production, and the loss of pinned and recessed began in 1982 at the dash 2 production. The gas ring problem mentioned by Texas Star had been fixed by the intro of the 6 inch barrel..

I bought 2 of them when I was first hired as a peace officer, the first one in 1981 and the second early in 1983. One had a white outline rear sight, the other didn't so I added one.

It seemed that very few of the Model 66's shipped with Target hammers and triggers, especially if compared to 6 inch Model 19's. I added the wide, smooth "Combat" trigger to mine. The target hammers and triggers used on stainless guns at the time are just flash chromed for appearance sake. Loose target triggers seem easier to find in silver finish than do hammers, but both can be found with some looking. Lots of folks swapped them into their guns.

The MIM trigger began towards the end of the 66-4 run and the MIM hammer was added at the 66-5 mark.

Looks like shinbone should be looking for a 66-1 through 66-4 gun.

As a rookie cop and gun nut/S&W enthusiast, I tried out a lot of guns, K, L and N framers, 3-1/2 to 6 inch barrels and always came back to the 6 inch M-66. It seemed to provide me the optimum in controllability and reduced muzzle flash while not feeling like it was adding any extra weight on my belt over a 4 inch gun.

Last edited by BUFF; 01-06-2017 at 07:20 PM.
Reply With Quote
The Following User Likes This Post:
  #28  
Old 01-06-2017, 08:16 AM
shinbone shinbone is offline
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Dec 2015
Posts: 131
Likes: 5
Liked 225 Times in 63 Posts
Default

K22fan, TS and Buff - Thanks for the additional info.

I do see some 66 no-dash's on the big auction site with 6" barrels. Does that mean they were special order guns, or have had their barrels replaced?

Last edited by shinbone; 01-06-2017 at 08:18 AM.
Reply With Quote
  #29  
Old 01-06-2017, 09:44 AM
silversnake silversnake is offline
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Sep 2015
Posts: 522
Likes: 313
Liked 523 Times in 249 Posts
Default

Quote:
Originally Posted by shinbone View Post
I want a 6" barrel gun and I strongly dislike the full underlug the 6" 686's always seem to have. This seems to be leading me to a M66 as my only option. I would love to have a 686 6" with half-lug barrel, but, sadly, I don't think S&W has ever made such a gun. Also, for aesthetic reasons, I am not interested in any models with the internal lock when a non-IL version is available.
You could always get a gunsmith to grind off the underlug on a 686.

As far as engineering changes go I like my 66-2 but doubt I would notice the difference between a 66-0 and 66-3.
Reply With Quote
  #30  
Old 01-06-2017, 09:52 AM
Dkrueger17's Avatar
Dkrueger17 Dkrueger17 is offline
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Jul 2015
Location: WI
Posts: 130
Likes: 303
Liked 452 Times in 63 Posts
Default

I too, have seen a handful of 6" 66 no dashes. The earliest I recall seeing had a 9K serial number, so it was most definitely towards the end of the the no dash era (1975-76 ish).

I was never able to nab a 6" 66-0 myself, however I did find a super nice, NIB, 66-1 w/6" barrel from 1979. It actually has the 6 1/8" barrel that was mentioned in the SCSW 4. It has a great feel in my hand, very similar to my 4" 66-0 with stainless sights. Can't decide which one I like better. I prefer the pinned/recessed models as well. Good luck on your hunt.
Attached Images
File Type: jpg 66-1.jpg (88.5 KB, 20 views)

Last edited by Dkrueger17; 01-06-2017 at 09:54 AM.
Reply With Quote
  #31  
Old 01-06-2017, 10:11 AM
shinbone shinbone is offline
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Dec 2015
Posts: 131
Likes: 5
Liked 225 Times in 63 Posts
Default

Quote:
Originally Posted by Dkrueger17 View Post
It actually has the 6 1/8" barrel that was mentioned in the SCSW 4.
Dkrueger17 - Beautiful M66 you have!

What's up with a 6-1/8" barrel!? I thought a 6" barrel was a 6.0" barrel. Why the extra 1/8"? Any benefits or detriments to such guns? Or, is it just a minor variation with no real effect on anything?


.

Last edited by shinbone; 01-06-2017 at 10:17 AM.
Reply With Quote
The Following User Likes This Post:
  #32  
Old 01-06-2017, 10:53 AM
Dkrueger17's Avatar
Dkrueger17 Dkrueger17 is offline
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Jul 2015
Location: WI
Posts: 130
Likes: 303
Liked 452 Times in 63 Posts
Default

Thank you. As per the SCSW 4, they mention a small grouping of 6" 66-1's from 1978-79 that were made with 6 1/8" barrels. Why you may ask? I'm not sure...perhaps a slip in production?
They also say most standard 6" S&W barrels are actually closer to 5 7/8". They claim that the 6 1/8" barreled 66's are worth a slight premium, but I have not seen any evidence nor proof to back that up as of yet. I just simply like 66's!
Reply With Quote
  #33  
Old 01-06-2017, 12:05 PM
Lewel's Avatar
Lewel Lewel is offline
SWCA Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Aug 2014
Location: Tuscaloosa, AL
Posts: 583
Likes: 900
Liked 317 Times in 125 Posts
Default

There are several md 66 on Gunbroker now from $669 up.

Good luck
Reply With Quote
  #34  
Old 01-06-2017, 12:48 PM
boatbum101 boatbum101 is offline
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Oct 2005
Location: Pensacola,FL
Posts: 1,720
Likes: 4,198
Liked 998 Times in 536 Posts
Default

If you're a cast bullet shooter like me get a earlier one . The newer EDM rifled barrels shoot jacketed bullets better than cast . If you're going to shoot mainly full pressure loads skip the K frame & get an L frame .
Reply With Quote
  #35  
Old 01-06-2017, 03:57 PM
shinbone shinbone is offline
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Dec 2015
Posts: 131
Likes: 5
Liked 225 Times in 63 Posts
Default

I sure am learning alot on this thread! Thanks for all the input.

I handloaded with my Dad when I was a kid. He loaded for handguns, and I loaded for rifles usg an RCBS Rockchucler press. I have been thinking about gettingin back into handloading, but, for now, I just buy cheap bulk ammo to practice and plink, which is usually lead bullets. 99% of the shooting will be with .38 special loads, but in the field, where it counts, the gun will be sighted for and loaded with .357 magnums.
Reply With Quote
  #36  
Old 01-06-2017, 07:29 PM
BUFF BUFF is offline
SWCA Member
Absent Comrade
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Nov 2002
Location: SLC, Utah
Posts: 5,062
Likes: 739
Liked 3,271 Times in 1,282 Posts
Default

The 6 inch Model 66 dash nothings guns very probably had original shorter 4 inch barrels replaced with 6 inchers post-purchase. At the time, ANY Model 66 was hard to find. The factory would do swaps and there were a surprising number of loose 6 inch barrels floating around after they had been in production for a few years.

One of my coworkers found a 6 inch barrel and our department "armorer" installed it, clamping them in unprotected vise jaws. Coworker was pissed but the "armorer" was a lieutenant, so what could he do?
Reply With Quote
  #37  
Old 01-06-2017, 07:45 PM
apollo99 apollo99 is offline
Member
M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter? M66 - which engineering # for the best shooter?  
Join Date: Jan 2016
Location: ARIZONA
Posts: 1,005
Likes: 103
Liked 1,475 Times in 601 Posts
Default

To the op's question, 66-4 , than the 66-5. while the five has the MIM parts, I do like the firing pin in the frame. if I had a choice I wouldget the -5 and get a new non-MIM trigger. Hey wait that's what I did. for only $45 and a little fitting , I got what I wanted.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
681 engineering changes Vartex S&W Revolvers: 1980 to the Present 4 05-26-2014 05:52 PM
681 Engineering Changes? snubbiefan S&W Revolvers: 1980 to the Present 7 09-14-2013 09:55 PM
S&W M66-5 Engineering Changes PMRet S&W Revolvers: 1980 to the Present 4 04-11-2009 04:15 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 10:56 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)