Smith & Wesson Forum

Go Back   Smith & Wesson Forum > >


Reply
 
Thread Tools Display Modes
  #1  
Old 03-18-2017, 02:54 PM
S&W Fan S&W Fan is offline
Member
Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: May 2004
Location: Colorado
Posts: 2,205
Likes: 1,398
Liked 3,014 Times in 831 Posts
Default Possible Jovino 28-2 .44spl **Update in 1st post**

**Update-Ok well I went to the range, fired 6 rounds, did pretty good, emptied the cylinder, put 6 more in and I ended up with a "2 shooter". After every two rounds it would bind. I could open the cylinder no problem. When I looked on the bench I found shavings from the bullets. Upon closer inspection I saw that one of the extractor pins from the back of the cylinder was missing (it was there when I bought it). The timing is off so I'm assuming that's the reason for the shavings. No idea though why it would bind after only two rounds-by that I mean the action would not cycle in either double or single though again I was able to open the cylinder just fine. In dry fire the gun cycles perfectly, hmm.

Today, Saturday, I was able to drop it off at a gunsmith I trust and that's done other work for me in the past on S&Ws. Didn't feel it'd be a big deal to get straightened out though the shop is a little busy right now. Probably be 2-3 weeks before I get it back. I'll update then, trying not to get too down about it. Hey the gun is almost 40 years old with an unknown use history so it's acceptable. The seller has agreed to pay for getting it fixed so we're all good.**



Well on a whim I went to the Tanner show outside of Denver today to just look around. I did see more older Smiths at this show than I have in the past-a few original 1917s, 66 no dash, 25." 66-2 and -4, a couple of early 15s and a few 19s from -3 up to -7.

I was going to back for a 22-4 when I spotted a friend that usually has nice things. He had the two 66 snubs, I was going to make a deal on the -2 when I noticed this big snub tucked in the corner of his display box. Hmm, short barrel, round butt 28-2 with what I think are Ahrends grips. He said he got it in a group of a few guns from a guy "up in the mountains" ahaha but on the hang tag it's marked "Jovino Custom". Well now I really had to look. I was almost drooling, to my untrained eye it has the "tells"-barrel profile, ball/detent on the crane so we made a deal. The ramp is definitely red, not as orange as it looks in the photos.

If any one can help with your more knowledgeable eyes I'd greatly appreciate it. Serial number is N5153XX. Here are few quick cell pics (the specks are just dust particles, it's almost flawless):





Last edited by S&W Fan; 03-25-2017 at 06:07 PM.
Reply With Quote
  #2  
Old 03-18-2017, 03:02 PM
Wyatt Burp Wyatt Burp is offline
Member
Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: Dec 2008
Location: Northern California
Posts: 4,847
Likes: 1,556
Liked 7,870 Times in 1,486 Posts
Default

Wow! A pinned and recessed snub .44 Special. What more could you ask for. I used to drool over their Effectors in Shotgun News in the 1980s. But I never knew they did .44 Specials, too. Very nice gun, and better than a Lew Horton.
Reply With Quote
The Following User Likes This Post:
  #3  
Old 03-18-2017, 03:05 PM
Breakaway500's Avatar
Breakaway500 Breakaway500 is offline
SWCA Member
Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: Jan 2017
Location: New England
Posts: 410
Likes: 1,222
Liked 723 Times in 216 Posts
Default

I looked in the SWSC 4th edition and no mention of a 28-2 in .44 Special,snubby or otherwise. Looks pretty cool!! Wow indeed!
__________________
S&W. Insurance for life
Reply With Quote
The Following User Likes This Post:
  #4  
Old 03-18-2017, 03:06 PM
S&W Fan S&W Fan is offline
Member
Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: May 2004
Location: Colorado
Posts: 2,205
Likes: 1,398
Liked 3,014 Times in 831 Posts
Default

Thanks, though the cylinder isn't recessed-I assume (uh oh that word lol) it's a model 24 cylinder that was used. The caliber markings on the barrel look to my, again untrained, eye as factory. My friend has fired it, says it shoots great, looking forward to hitting the range maybe tomorrow to see how it shoots (I have some mild .44 factory cowboy loads for plinking in my 629).

Forgot to mention I also picked up a couple new in the package HKS speedloaders too.

Last edited by S&W Fan; 03-18-2017 at 03:12 PM.
Reply With Quote
The Following User Likes This Post:
  #5  
Old 03-18-2017, 03:41 PM
BigBoku's Avatar
BigBoku BigBoku is offline
Member
Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: Mar 2004
Location: INSIDE MY SAFE WITH MY S&W\'s
Posts: 341
Likes: 19
Liked 105 Times in 45 Posts
Default

Nice Catch, regardless of who did the work that is a beautiful revolver and being a Jovino would be icing on the cake.

BTW the weather isn't anywhere near as nice as yours but hopefully soon brother!
Reply With Quote
The Following User Likes This Post:
  #6  
Old 03-18-2017, 03:49 PM
series guy series guy is offline
Member
Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: May 2010
Location: The Steel City
Posts: 497
Likes: 582
Liked 627 Times in 238 Posts
Default

Beautiful gun. Looking at the cylinder to recoil shield gap it has to be a recessed cylinder.
Reply With Quote
The Following 3 Users Like Post:
  #7  
Old 03-18-2017, 03:54 PM
arjay's Avatar
arjay arjay is offline
Member
Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: Mar 2006
Location: Colorado
Posts: 10,243
Likes: 40,531
Liked 12,374 Times in 4,523 Posts
Default

Pretty nice!
And at Tanner,no less Possible Jovino 28-2 .44spl  **Update in 1st post**Possible Jovino 28-2 .44spl  **Update in 1st post**
Reply With Quote
The Following User Likes This Post:
  #8  
Old 03-18-2017, 04:00 PM
Wyatt Burp Wyatt Burp is offline
Member
Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: Dec 2008
Location: Northern California
Posts: 4,847
Likes: 1,556
Liked 7,870 Times in 1,486 Posts
Default

Quote:
Originally Posted by S&W Fan View Post
Thanks, though the cylinder isn't recessed-I assume (uh oh that word lol) it's a model 24 cylinder that was used. The caliber markings on the barrel look to my, again untrained, eye as factory. My friend has fired it, says it shoots great, looking forward to hitting the range maybe tomorrow to see how it shoots (I have some mild .44 factory cowboy loads for plinking in my 629).

Forgot to mention I also picked up a couple new in the package HKS speedloaders too.
Oops. It looked recessed in the picture. Don't matter. That's a great gun and another reminder of why I should have bought a Jovino way back when.
Reply With Quote
The Following User Likes This Post:
  #9  
Old 03-18-2017, 04:26 PM
loc n load loc n load is offline
SWCA Member
Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: Jan 2013
Location: S/W Indiana
Posts: 1,012
Likes: 823
Liked 1,252 Times in 499 Posts
Default

Regardless of who had it, where it came from, who built it or any other amenities, it is a winner.....good find.
Reply With Quote
The Following 6 Users Like Post:
  #10  
Old 03-18-2017, 05:02 PM
69HEMI-R/T's Avatar
69HEMI-R/T 69HEMI-R/T is offline
Member
 
Join Date: Apr 2006
Location: Northern Mexico/S.E. Tejas
Posts: 629
Likes: 981
Liked 402 Times in 156 Posts
Default

That's a beautiful snub and anyone should be proud to own it! I am anxiously awaiting the results of your range trip.
Reply With Quote
The Following User Likes This Post:
  #11  
Old 03-18-2017, 06:24 PM
S&W Fan S&W Fan is offline
Member
Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: May 2004
Location: Colorado
Posts: 2,205
Likes: 1,398
Liked 3,014 Times in 831 Posts
Default

Thanks all, and BigBoku not to rub it in but I indeed did just get back from a little outing on the bike, almost 80 in the Denver area today!!

arjay, you said it my friend. I allowed myself two hours because it is so nice out and there it was haha. That's the reason the range visit will have to wait. Though now we're gathering the family for breakfast tomorrow then out to the park with the grandmunchkin and the dogs so I may have to wait.

**Put on a set of old Pach Compacs for a round K and they fit perfect. The wood grips are definitely from Ahrends, stamped on the inside of the right panel.**

Last edited by S&W Fan; 03-18-2017 at 07:52 PM.
Reply With Quote
The Following 2 Users Like Post:
  #12  
Old 03-18-2017, 10:05 PM
bamabiker bamabiker is offline
Member
Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: May 2008
Location: Near Birmingham
Posts: 6,068
Likes: 3,360
Liked 4,238 Times in 1,317 Posts
Default

Quote:
Originally Posted by series guy View Post
Beautiful gun. Looking at the cylinder to recoil shield gap it has to be a recessed cylinder.
This^^^^^.
If it's not recessed I don't think you could load it.
Nice gun.
Reply With Quote
The Following 2 Users Like Post:
  #13  
Old 03-18-2017, 10:43 PM
Muley Gil Muley Gil is offline
US Veteran
Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: Feb 2005
Location: The SW Va Blue Ridge
Posts: 8,714
Likes: 17,339
Liked 5,093 Times in 2,211 Posts
Default

Quote:
Originally Posted by Breakaway500 View Post
I looked in the SWSC 4th edition and no mention of a 28-2 in .44 Special,snubby or otherwise. Looks pretty cool!! Wow indeed!
That's because .44 Special was not an option from the factory for the M28.

S&W quit making .44 Specials in the mid 1960s. There weren't many made post WW II. So the only way to obtain a .44 Special was to convert another N frame revolver. The M28 was easier to come by in the 1960 and '70s.

Skeeter Skelton wrote a number of articles in Shooting Times magazine about converting M28s to .44 Special and also to .45 Colt. Forum member tennexplorer and I haunted the stores in Auburn, Alabama that carried Shooting Times each month, hoping for a new Skeeter story on the big bore revolver conversions.

In 1976 I took the plunge and bought a 3 1/2" blue M27 and then found a 6 1/2" .44 Special from J&G Rifle Ranch out in Montana. I took the said items to a gunsmith in Selma, Alabama and had the barrel installed and the cylinder re-chambered. A few months later I had a fine shooting .44. I had it trimmed to 5" and re-blued in 2006. Still have it and it still shoots great.
__________________
John 3:16
WAR EAGLE!

Last edited by Muley Gil; 03-18-2017 at 10:49 PM.
Reply With Quote
  #14  
Old 03-18-2017, 11:06 PM
S&W Fan S&W Fan is offline
Member
Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: May 2004
Location: Colorado
Posts: 2,205
Likes: 1,398
Liked 3,014 Times in 831 Posts
Default

I'm guessing this gun is from 1978 by the serial number, also I owe you all an apology for indeed the cylinder is recessed! I wonder if that means if the original cylinder was used and just bored to the new caliber?
Reply With Quote
The Following User Likes This Post:
  #15  
Old 03-19-2017, 12:06 AM
BC38's Avatar
BC38 BC38 is offline
Member
Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: Nov 2013
Location: Spokane, WA
Posts: 3,849
Likes: 125
Liked 3,558 Times in 1,573 Posts
Default

One of it's poorer kissing cousins lives in my safe.

An Astra Terminator by Jovino Customs.

It's a 44 magnum though...
Attached Thumbnails
Possible Jovino 28-2 .44spl  **Update in 1st post**-dscn2578-jpg   Possible Jovino 28-2 .44spl  **Update in 1st post**-dscn2575-2-jpg  
Reply With Quote
The Following 5 Users Like Post:
  #16  
Old 03-19-2017, 12:10 AM
Muley Gil Muley Gil is offline
US Veteran
Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: Feb 2005
Location: The SW Va Blue Ridge
Posts: 8,714
Likes: 17,339
Liked 5,093 Times in 2,211 Posts
Default

Quote:
Originally Posted by S&W Fan View Post
I'm guessing this gun is from 1978 by the serial number, also I owe you all an apology for indeed the cylinder is recessed! I wonder if that means if the original cylinder was used and just bored to the new caliber?
My M27 conversion is recessed, as was a M28 conversion that I had about 10 years ago. The original .357 cylinders on both were re-chambered to .44 Special.
__________________
John 3:16
WAR EAGLE!

Last edited by Muley Gil; 03-19-2017 at 08:41 AM.
Reply With Quote
The Following User Likes This Post:
  #17  
Old 03-19-2017, 12:18 AM
A10's Avatar
A10 A10 is offline
Member
Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: Jun 2009
Location: Auburn WA
Posts: 9,524
Likes: 18,425
Liked 8,275 Times in 3,514 Posts
Default

Nice custom gun, congratulations!
__________________
29 months and counting....
Reply With Quote
The Following User Likes This Post:
  #18  
Old 03-19-2017, 02:19 AM
RdrBill RdrBill is offline
US Veteran
Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: Feb 2006
Location: Yuma, ARIZONA
Posts: 752
Likes: 54
Liked 727 Times in 181 Posts
Default S&W 25-5

All.
Another example along this line. S&W Model 25-5, 45 Colt. Has ball detent lock up, oval shaped hammer and polished trigger. Executioner Stag grips.
Bill@Yuma
Attached Thumbnails
Possible Jovino 28-2 .44spl  **Update in 1st post**-wde_0406-jpg   Possible Jovino 28-2 .44spl  **Update in 1st post**-wde_0404-jpg  
Reply With Quote
  #19  
Old 03-19-2017, 05:14 AM
WC145's Avatar
WC145 WC145 is offline
Member
Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: Oct 2008
Location: Maine
Posts: 3,061
Likes: 1,923
Liked 2,869 Times in 670 Posts
Default

Nice catch and looks like it was well done. But, while the snubby conversion was certainly done in a similar style to the Jovino guns, I've never seen anything about the Jovino gun shop doing caliber conversions. There were any number of gunsmiths doing snubby conversions back in the day, with the Jovino gun shop and Austin Behlert being two of the best known. And, as mentioned, M28 big bore caliber conversions were common, heck, they're still being done, I have one out being turned into a 3" .41mag now. So, while it's obvious that it was a skilled gunsmith that did the work on that particular gun, it probably did not come out of the Jovino gun shop.

I'm also looking forward to your range report.
__________________
Don't kiss smiling dogs!
Reply With Quote
The Following User Likes This Post:
  #20  
Old 03-19-2017, 08:36 AM
mhg2tld's Avatar
mhg2tld mhg2tld is offline
Member
Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: Nov 2008
Location: South AL
Posts: 131
Likes: 12
Liked 37 Times in 12 Posts
Default

That is a very nice looking snubby. Congrats on the find. I just bought and yet to receive a M25-2 that was converted to a 44 mag with a 3 in. barrel, by an unknown gunsmith. Should get it in the mail this week.
Attached Thumbnails
Possible Jovino 28-2 .44spl  **Update in 1st post**-dscf1114-jpg   Possible Jovino 28-2 .44spl  **Update in 1st post**-dscf1191-jpg   Possible Jovino 28-2 .44spl  **Update in 1st post**-dscf1124-jpg  
__________________
Regards
Lynn

Last edited by mhg2tld; 03-19-2017 at 08:45 AM.
Reply With Quote
The Following 6 Users Like Post:
  #21  
Old 03-19-2017, 10:18 AM
RIDE-RED 350r's Avatar
RIDE-RED 350r RIDE-RED 350r is offline
Member
Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: Nov 2010
Location: Blossvale NY
Posts: 1,186
Likes: 3,395
Liked 806 Times in 356 Posts
Default

Very cool find!!!

Now that's got me thinking about something cool to do with my 28-2, particularly WC145's comment about 41 mag...
__________________
Formerly: "Dooman"
Reply With Quote
The Following User Likes This Post:
  #22  
Old 03-19-2017, 10:49 AM
S&W Fan S&W Fan is offline
Member
Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: May 2004
Location: Colorado
Posts: 2,205
Likes: 1,398
Liked 3,014 Times in 831 Posts
Default

I've gathered through reading of other's that have Jovino conversions that now the shop is unable/unwilling to help track down the history of possible conversions. I believe Behlert put some kind of marking on theirs to show they did the work, I haven't located any markings outside of the traditional forging numbers though I only took a quick peek at the grip frame when I swapped the grips. I'll do that later.

Doesn't look like I can get to the range today, babysitting for the 3 year old will take up most/all of the day-it's a sacrifice I'm willing to make

I'm unsure if it's worth lettering to see if it shipped to the Jovino shop, if any of you have other suggestions on tracking it down I'm listening.

Have a great day.
Reply With Quote
  #23  
Old 03-19-2017, 07:43 PM
bubbajoe45's Avatar
bubbajoe45 bubbajoe45 is offline
Member
Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: Mar 2009
Location: The Selkirks
Posts: 927
Likes: 118
Liked 289 Times in 75 Posts
Default

Quote:
Originally Posted by Muley Gil View Post
My M27 conversion is recessed, as was a M28 conversion that I had about 10 years ago. The original .357 cylinders on both were re-chambered to .44 Special.

My M27 .44 Spl is also recessed and was converted from the original .357 cylinder.
Reply With Quote
  #24  
Old 03-19-2017, 09:48 PM
Nightowl's Avatar
Nightowl Nightowl is offline
SWCA Member
Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: Apr 2004
Location: Warrensburg, MO USA
Posts: 3,737
Likes: 587
Liked 1,102 Times in 672 Posts
Default

I don't think I have ever seen Smith factory lettering on the barrel that close to the frame. Whether Jovino, or some other talent converted that one, it is well done and a real neat gun, and I wouldn't worry about who did it!
__________________
Richard Gillespie
Reply With Quote
The Following 3 Users Like Post:
  #25  
Old 03-20-2017, 12:06 AM
WC145's Avatar
WC145 WC145 is offline
Member
Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: Oct 2008
Location: Maine
Posts: 3,061
Likes: 1,923
Liked 2,869 Times in 670 Posts
Default

Quote:
Originally Posted by S&W Fan View Post
I've gathered through reading of other's that have Jovino conversions that now the shop is unable/unwilling to help track down the history of possible conversions. I believe Behlert put some kind of marking on theirs to show they did the work, I haven't located any markings outside of the traditional forging numbers though I only took a quick peek at the grip frame when I swapped the grips. I'll do that later.

Doesn't look like I can get to the range today, babysitting for the 3 year old will take up most/all of the day-it's a sacrifice I'm willing to make

I'm unsure if it's worth lettering to see if it shipped to the Jovino shop, if any of you have other suggestions on tracking it down I'm listening.

Have a great day.
Jovino's has never been able to provide any records on their conversions. Also, any Behlert guns that were marked are signed on the barrel but I've only seen a couple of his revolvers that were. With the exception of the Jovino "Effector" guns and Mag-na-port's work, very few of the N frame snubby conversions are marked in any way. It makes identifying the gunsmiths responsible for the work almost impossible without original invoices and it often comes down to the story that comes with the gun.
__________________
Don't kiss smiling dogs!
Reply With Quote
The Following User Likes This Post:
  #26  
Old 03-20-2017, 12:38 AM
CA Escapee CA Escapee is offline
Member
Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: Mar 2013
Posts: 183
Likes: 1
Liked 72 Times in 41 Posts
Default

Congratulations on your purchase, I've been looking at that one for the past few months. I've become interested in 2.5" K-frames lately and saw the two 66's there. There was a 2.5" model 19 on another table, too. I already have a PC model 67 Carry Comp though, and even saw one of those on a table.

There really were a lot of older S&W's.

Bill
Reply With Quote
The Following User Likes This Post:
  #27  
Old 03-20-2017, 11:26 AM
viceunit viceunit is offline
Member
Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: Jan 2009
Location: Rocky River OH
Posts: 705
Likes: 227
Liked 393 Times in 145 Posts
Default

Quote:
Originally Posted by S&W Fan View Post
I'm guessing this gun is from 1978 by the serial number, also I owe you all an apology for indeed the cylinder is recessed! I wonder if that means if the original cylinder was used and just bored to the new caliber?
That's what I thought too. I should have read this first before going into the safe and comparing frame lugs on recessed and non-recessed guns to your photo. Super cool, a P&R N-frame 44 special.
__________________
Tony
Reply With Quote
The Following 3 Users Like Post:
  #28  
Old 03-25-2017, 06:06 PM
S&W Fan S&W Fan is offline
Member
Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: May 2004
Location: Colorado
Posts: 2,205
Likes: 1,398
Liked 3,014 Times in 831 Posts
Default

Bump for an update
Reply With Quote
  #29  
Old 03-25-2017, 06:18 PM
les.b's Avatar
les.b les.b is offline
US Veteran
Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post** Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: May 2015
Location: West Virginia
Posts: 2,414
Likes: 26,149
Liked 6,426 Times in 1,834 Posts
Default

Wonderful gun. Not that I have any "need" for one, but I would but in a heartbeat if I found one for sale!!

Best Regards, Les
__________________
SWCA 3084, SWHF 495, PGCA 3064
Reply With Quote
  #30  
Old 03-25-2017, 09:40 PM
Bob L Bob L is offline
Member
Possible Jovino 28-2 .44spl  **Update in 1st post**  
Join Date: Sep 2005
Location: SW Ohio
Posts: 450
Likes: 113
Liked 226 Times in 127 Posts
Default

Regardless of who did the work or how they did it, that is one sweet looking revolver. Congrats on a neat find. Be sure to give us a range report when you can and Thanks for sharing! Now I have one more revolver on my want list.
Reply With Quote
The Following User Likes This Post:
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ruger GP100 3in 44spl or S&W ?? 44spl ontargetagain S&W Revolvers: 1980 to the Present 16 01-31-2017 05:54 PM
Jovino? tge45 S&W Revolvers: 1961 to 1980 12 03-04-2014 09:35 AM
Jovino 25-2 d.t.h. S&W Revolvers: 1980 to the Present 14 10-03-2013 08:26 PM
W.T.B. jovino dropshot WANTED to Buy 4 01-27-2013 04:54 PM
Jovino 25-5 st regis S&W Revolvers: 1980 to the Present 21 01-23-2009 11:29 AM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 03:18 AM.


S-W Forum, LLC 2000-2015
Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)