Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Revolvers > S&W Revolvers: 1961 to 1980
o

Notices

S&W Revolvers: 1961 to 1980 3-Screw PINNED Barrel SWING-OUT Cylinder Hand Ejectors WITH Model Numbers


Reply
 
Thread Tools Display Modes
  #1  
Old 03-19-2017, 10:47 AM
RIDE-RED 350r's Avatar
RIDE-RED 350r RIDE-RED 350r is offline
Member
Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2???  
Join Date: Nov 2010
Location: Blossvale NY
Posts: 1,295
Likes: 3,964
Liked 950 Times in 427 Posts
Default Re-chamber my 28-2???

So the thread about the gent who found a snubby 28-2 re-chambered to 44spl has sparked some thought for me, particularly the post in that thread about one that was chambered to 41 mag. It got me thinking and I didn't want to jack his thread so here is my own...

I have a 6" 28-2 in excellent condition that I paid $475 plus sales tax for about 4 years ago or so. It's a very accurate shooter to boot.

Basically I am wondering about this idea of re-chambering... I'm not into my revolvers as an investment persay, but I don't want to make any of them worthless. Are there shops out there that can do a job like this that doesn't diminish the value of the revolver?? I'm thinking like Turnbull, their work does not diminish the value on anything they touch. Just as important, I would want some level of assurance that it will still shoot well. I don't want something I couldn't hit the broad side of a barn from inside the barn with.

I have been wanting a 41mag but I have had to spend extra money on other things lately. I would still like to get my mitts on a 6" m57 though regardless if I convert my 28-2 or not.

What are your thoughts?

Here is my m28.
Attached Images
File Type: jpg ResizedImage_1394571253761.jpg (72.0 KB, 101 views)
File Type: jpg ResizedImage_1394571292135.jpg (70.3 KB, 86 views)

Last edited by RIDE-RED 350r; 03-19-2017 at 10:49 AM.
Reply With Quote
The Following User Likes This Post:
  #2  
Old 03-19-2017, 11:10 AM
mhg2tld's Avatar
mhg2tld mhg2tld is offline
Member
Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2???  
Join Date: Nov 2008
Location: South AL
Posts: 165
Likes: 34
Liked 70 Times in 27 Posts
Default

If my plans were to buy a M57 regardless of what you do with your M28, I would keep the M28 as it is. That is unless you have a need for two 41 magnums. Very nice M28 you have there.
__________________
Regards
Lynn
Reply With Quote
The Following 7 Users Like Post:
  #3  
Old 03-19-2017, 11:15 AM
long colt frazier's Avatar
long colt frazier long colt frazier is offline
SWCA Member
Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2???  
Join Date: Aug 2009
Location: NC Arkansas
Posts: 1,491
Likes: 1,660
Liked 1,304 Times in 320 Posts
Default

I would look for a 6" 57 sell the 28 or keep it. By the time you had it converted you could have bought a 57.
Mark
Reply With Quote
The Following 7 Users Like Post:
  #4  
Old 03-19-2017, 11:15 AM
fat tom's Avatar
fat tom fat tom is offline
Absent Comrade
Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2???  
Join Date: Feb 2005
Location: Central South Carolina
Posts: 7,215
Likes: 6,581
Liked 12,383 Times in 2,810 Posts
Default

Keep as is. If you want a 41 Mag,then save your money and buy one! Don't go screwin' up a perfectly good HP.
f.t.
__________________
South Carolina-God's country
Reply With Quote
The Following 6 Users Like Post:
  #5  
Old 03-19-2017, 11:17 AM
NCBeagle's Avatar
NCBeagle NCBeagle is offline
US Veteran
Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2???  
Join Date: Apr 2008
Location: Charlotte, NC
Posts: 1,697
Likes: 5,471
Liked 6,633 Times in 1,164 Posts
Default

In my view, to re-chamber would be to spend several hundred dollars to reduce the 28's value and also take a fine Highway Patrolman forever out of the market .

You could trade the 28-2 for a 57 and even add a bit of cash. You still come out ahead in the long run. You can buy another 28 later if interested. Just a thought.

It's up to you, but I'm told that every time somebody modifies a pinned and recessed Smith & Wesson a puppy gets cancer. Not sure if that's true.
Reply With Quote
The Following 4 Users Like Post:
  #6  
Old 03-19-2017, 11:19 AM
RIDE-RED 350r's Avatar
RIDE-RED 350r RIDE-RED 350r is offline
Member
Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2???  
Join Date: Nov 2010
Location: Blossvale NY
Posts: 1,295
Likes: 3,964
Liked 950 Times in 427 Posts
Default

Since I posted this thread I have been doing some googling of the subject... I'm leaning toward leaving my 28 unaltered at this point. Not finding much in the way of shops that advertise such a service so far, and results from various forum posts seem to indicate that a shop that would do it and not hurt the value of the piece would cost almost as much as finding a descent m57...

If I was looking to snubby-fy my 28 it might be worth looking into more seriously...But I want to keep the barrel as it is. I don't care for the idea of boring the barrel and installing an insert either.
Reply With Quote
The Following User Likes This Post:
  #7  
Old 03-19-2017, 11:22 AM
RIDE-RED 350r's Avatar
RIDE-RED 350r RIDE-RED 350r is offline
Member
Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2???  
Join Date: Nov 2010
Location: Blossvale NY
Posts: 1,295
Likes: 3,964
Liked 950 Times in 427 Posts
Default

Thanks for the well intended advice and compliments guys... I think I will be heeding it.

Not sure about selling my HP though... I just like that darn thing.. I still have the original Magnas for it... not diamonds though. I found the that I like the stock targets that came with my m29 look and feel better on the HP. The 29 got factory combats..
Reply With Quote
The Following User Likes This Post:
  #8  
Old 03-19-2017, 12:02 PM
hittman77's Avatar
hittman77 hittman77 is offline
Member
Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2???  
Join Date: Jan 2008
Location: Illinois
Posts: 2,778
Likes: 1,903
Liked 4,430 Times in 1,360 Posts
Default

Quote:
Originally Posted by RIDE-RED 350r View Post
their work does not diminish the value on anything they touch.
Well .... that's true only if your potential buyer is looking for a CUSTOM gun. Folks looking for a 28 and finding one that's been customized ..... it's ruined. (Ruined may be a little strong but hope you get my point.)

For me ...... custom's don't trip my trigger and especially not when a fine older gun was sacrificed to make the custom work happen.
Reply With Quote
The Following 2 Users Like Post:
  #9  
Old 03-19-2017, 12:13 PM
RIDE-RED 350r's Avatar
RIDE-RED 350r RIDE-RED 350r is offline
Member
Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2???  
Join Date: Nov 2010
Location: Blossvale NY
Posts: 1,295
Likes: 3,964
Liked 950 Times in 427 Posts
Default

Agreed..... It was a fleeting if not bad idea. My HP will stay as-is and in my possession... Just have to wait for my 57 till I can afford to buy one.

Those m57MG's are the cats rear-end too.
Reply With Quote
The Following User Likes This Post:
  #10  
Old 03-19-2017, 01:39 PM
steelslaver's Avatar
steelslaver steelslaver is offline
US Veteran
Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2???  
Join Date: Oct 2013
Location: Central Montana
Posts: 13,620
Likes: 12,734
Liked 39,084 Times in 9,964 Posts
Default

I have converted some of my guns, none of which were collectors items. But, I have a shop and can do things myself. With the price of skilled labor conversions are just not worth it. Bottom line prices, probably, re-chamber $150, barrel $100-150, fit barrel $50-100. $300 min. Completed value maybe $600. Nice model 28-2 value $600. I recently bought a 41 mag for $700 plus FFL fee. You could sell the 28-2 for $600 and toss in $300 and shopp around to get a shooter 41mag, dies, brass and bullet mold.

That said I have a slightly freckled 28-2 that is going to become my nephews 45 acp/colt. $500 28-2, $100 44 mag cylinder and a $100 45 barrel (could sell for more though). Sell 28 barrel and cylinder, own tools and reamer. Factory, S&W 45 colt 800-1200. . Free labor means low cost carry shooter for nephew who works and plays outdoors in Alaska.

Last edited by steelslaver; 03-19-2017 at 01:41 PM.
Reply With Quote
The Following 2 Users Like Post:
  #11  
Old 03-19-2017, 02:35 PM
RIDE-RED 350r's Avatar
RIDE-RED 350r RIDE-RED 350r is offline
Member
Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2???  
Join Date: Nov 2010
Location: Blossvale NY
Posts: 1,295
Likes: 3,964
Liked 950 Times in 427 Posts
Default

Yeah, that sure does add up for a guy like me and I can see why I'm just better off to hunt up a 57 when I'm ready. And that's not figuring the diminished value of my Patrolman.
Reply With Quote
  #12  
Old 03-19-2017, 03:38 PM
WC145's Avatar
WC145 WC145 is offline
Member
Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2???  
Join Date: Oct 2008
Location: Maine
Posts: 3,289
Likes: 3,076
Liked 3,828 Times in 851 Posts
Default

If your 28 is nice you should probably leave it as-is. The one I'm having converted to .41mag is a beater that had already been round butted, had the barrel changed (but it rubs on the cylinder), and has some misc marks and dings from being knocked around. It was either get another 28 barrel and try to make something useful out of it or make something better, because it was no good the way it was. Had it been a solid gun that was a good shooter I wouldn't have messed with it.
__________________
Don't kiss smiling dogs!
Reply With Quote
The Following User Likes This Post:
  #13  
Old 03-20-2017, 12:42 AM
ddixie884's Avatar
ddixie884 ddixie884 is offline
Member
Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2???  
Join Date: Dec 2004
Location: Avery,Tx
Posts: 2,563
Likes: 3,812
Liked 1,860 Times in 938 Posts
Default

The cylinder on a M-28 is shorter than a M-57. Standard jhps will fit but a true Keith is too long for the M-28 cylinder in mag brass. You didn't ask, but I thought I'd mention it.
__________________
dd884
JMHO-YMMV
Reply With Quote
The Following User Likes This Post:
  #14  
Old 03-20-2017, 01:27 AM
STCM(SW)'s Avatar
STCM(SW) STCM(SW) is offline
US Veteran
Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2???  
Join Date: Mar 2012
Location: E. Washington State
Posts: 5,475
Likes: 1,321
Liked 10,566 Times in 3,212 Posts
Default

I've had 2 M28-2 re-chamber. One to 38-40 and one to .45 colt.
picture upload
screen shot

M28-2 were not that expensive when I had them done and worth the
cost I think.
__________________
Only difference Fool/Mule-ears

Last edited by STCM(SW); 03-20-2017 at 01:34 AM.
Reply With Quote
The Following 2 Users Like Post:
  #15  
Old 03-20-2017, 08:51 AM
steelslaver's Avatar
steelslaver steelslaver is offline
US Veteran
Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2???  
Join Date: Oct 2013
Location: Central Montana
Posts: 13,620
Likes: 12,734
Liked 39,084 Times in 9,964 Posts
Default

I am not totally against rechambering. But, a lot of those that are around were done when both model 28s and labor was a lot less and the big bores were a lot harder to come by.

ddixe is correct on the cylinder length. If you use a model 28 cylinder for a 45 colt of a 41 mag conversion you will not be able to load the longer bullets unless you seat them deep. I had a 25-3 which was the first of the model 25 colt guns, and it had the same shorter cylinder length as the N frame 357 and had to seat my 255 gr SWC in front of front band, same thing with my first 45 colt conversion using a 28 cylinder. The factory 42 mags and 45 colts from 25-5 on use a longer 44 mag length cylinder. I have 5 45 colt conversions now, a model 1955, 2 model 629s and a Brazilian done into a carbine. All now use reamed 44 mag cylinders. I also have a 455 triple lock that was converted by reaming before I bought it. I wish the TL was unconverted and that I had left the 1955 alone, but the 1955 was done before I knew they were something "special". To late now.
Reply With Quote
The Following User Likes This Post:
  #16  
Old 03-20-2017, 03:00 PM
Jerry M Jerry M is offline
Member
 
Join Date: Apr 2009
Location: Glen Burnie, MD
Posts: 82
Likes: 37
Liked 35 Times in 24 Posts
Default

In the 1980's my buddy converted at least 3 model 28s to 45LC, with new barrels and cylinders available at that time. I thought it was stupid then and more so now.

Good luck

Jerry
Reply With Quote
The Following User Likes This Post:
  #17  
Old 03-20-2017, 03:50 PM
WC145's Avatar
WC145 WC145 is offline
Member
Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2???  
Join Date: Oct 2008
Location: Maine
Posts: 3,289
Likes: 3,076
Liked 3,828 Times in 851 Posts
Default

Quote:
Originally Posted by ddixie884 View Post
The cylinder on a M-28 is shorter than a M-57. Standard jhps will fit but a true Keith is too long for the M-28 cylinder in mag brass. You didn't ask, but I thought I'd mention it.
I'm using a NOS titanium .41mag cylinder in my conversion, ordered it from Numrich's.
__________________
Don't kiss smiling dogs!
Reply With Quote
  #18  
Old 03-20-2017, 04:02 PM
BLACKHAWKNJ BLACKHAWKNJ is offline
Member
 
Join Date: Oct 2006
Posts: 5,761
Likes: 1,224
Liked 5,799 Times in 2,354 Posts
Default

Yes, i would not rechamber/re-barrel a classic gun out of production for 30 years. One consideration is that since the S&W's chamber notches are over the cylinder, rechambering might take away too much metal.
Reply With Quote
The Following User Likes This Post:
  #19  
Old 03-20-2017, 04:34 PM
steelslaver's Avatar
steelslaver steelslaver is offline
US Veteran
Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2???  
Join Date: Oct 2013
Location: Central Montana
Posts: 13,620
Likes: 12,734
Liked 39,084 Times in 9,964 Posts
Default

Quote:
Originally Posted by BLACKHAWKNJ View Post
Yes, i would not rechamber/re-barrel a classic gun out of production for 30 years. One consideration is that since the S&W's chamber notches are over the cylinder, rechambering might take away too much metal.

Same cylinder diameter as factory 41 and 44 mags as well as 45 colts, with the notches in exactly the same location. Unless you used a real old cylinder prior to improve heat treatment there would be no real difference in cylinders strength.
Reply With Quote
The Following User Likes This Post:
  #20  
Old 03-20-2017, 04:49 PM
rwt1405's Avatar
rwt1405 rwt1405 is offline
SWCA Member
Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2???  
Join Date: Feb 2013
Posts: 3,305
Likes: 14,958
Liked 2,549 Times in 1,145 Posts
Default

Quote:
Originally Posted by steelslaver View Post
I have converted some of my guns, none of which were collectors items. But, I have a shop and can do things myself. With the price of skilled labor conversions are just not worth it. Bottom line prices, probably, re-chamber $150, barrel $100-150, fit barrel $50-100. $300 min. Completed value maybe $600. Nice model 28-2 value $600. I recently bought a 41 mag for $700 plus FFL fee. You could sell the 28-2 for $600 and toss in $300 and shopp around to get a shooter 41mag, dies, brass and bullet mold.

That said I have a slightly freckled 28-2 that is going to become my nephews 45 acp/colt. $500 28-2, $100 44 mag cylinder and a $100 45 barrel (could sell for more though). Sell 28 barrel and cylinder, own tools and reamer. Factory, S&W 45 colt 800-1200. . Free labor means low cost carry shooter for nephew who works and plays outdoors in Alaska.
Uncle Steelslaver, it's been so long!
Reply With Quote
  #21  
Old 03-20-2017, 04:53 PM
chief38's Avatar
chief38 chief38 is offline
Member
Re-chamber my 28-2???  
Join Date: Apr 2006
Posts: 17,759
Likes: 7,835
Liked 25,615 Times in 8,661 Posts
Default

Turnbull is one of the very best but you will pay top dollar! You would be far better off just buying what you want, keeping or selling your M28 - your choice. While Turnbull's work is impeccable, his prices are quite high and his wait times quite long - that said, he will not ruin your gun like many other do.
Reply With Quote
The Following User Likes This Post:
  #22  
Old 03-20-2017, 04:58 PM
rwt1405's Avatar
rwt1405 rwt1405 is offline
SWCA Member
Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2???  
Join Date: Feb 2013
Posts: 3,305
Likes: 14,958
Liked 2,549 Times in 1,145 Posts
Default

Quote:
Originally Posted by RIDE-RED 350r View Post
So the thread about the gent who found a snubby 28-2 re-chambered to 44spl has sparked some thought for me, particularly the post in that thread about one that was chambered to 41 mag. It got me thinking and I didn't want to jack his thread so here is my own...

I have a 6" 28-2 in excellent condition that I paid $475 plus sales tax for about 4 years ago or so. It's a very accurate shooter to boot.

Basically I am wondering about this idea of re-chambering... I'm not into my revolvers as an investment persay, but I don't want to make any of them worthless. Are there shops out there that can do a job like this that doesn't diminish the value of the revolver?? I'm thinking like Turnbull, their work does not diminish the value on anything they touch. Just as important, I would want some level of assurance that it will still shoot well. I don't want something I couldn't hit the broad side of a barn from inside the barn with.

I have been wanting a 41mag but I have had to spend extra money on other things lately. I would still like to get my mitts on a 6" m57 though regardless if I convert my 28-2 or not.

What are your thoughts?

Here is my m28.
I'll offer you $500 to make you whole again on your 28-2 and start you toward your M-57, because I'm that kind of guy!
Reply With Quote
The Following User Likes This Post:
  #23  
Old 03-20-2017, 05:29 PM
RIDE-RED 350r's Avatar
RIDE-RED 350r RIDE-RED 350r is offline
Member
Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2???  
Join Date: Nov 2010
Location: Blossvale NY
Posts: 1,295
Likes: 3,964
Liked 950 Times in 427 Posts
Default

Quote:
Originally Posted by rwt1405 View Post
I'll offer you $500 to make you whole again on your 28-2 and start you toward your M-57, because I'm that kind of guy!
I appreciate the kind offer, but I'm more of a collector than a flipper... And I just like the darn thing too much.
Reply With Quote
The Following User Likes This Post:
  #24  
Old 03-20-2017, 05:35 PM
rwt1405's Avatar
rwt1405 rwt1405 is offline
SWCA Member
Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2???  
Join Date: Feb 2013
Posts: 3,305
Likes: 14,958
Liked 2,549 Times in 1,145 Posts
Default

Quote:
Originally Posted by RIDE-RED 350r View Post
I appreciate the kind offer, but I'm more of a collector than a flipper... And I just like the darn thing too much.
I'm here for ya buddy, if you change your mind!
Reply With Quote
The Following User Likes This Post:
  #25  
Old 03-20-2017, 05:57 PM
Muley Gil Muley Gil is offline
US Veteran
Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2???  
Join Date: Feb 2005
Location: The SW Va Blue Ridge
Posts: 17,471
Likes: 88,955
Liked 24,775 Times in 8,480 Posts
Default

These days, conversions don't make as much sense as they did back in the '70s and '80s. If you want a tapered barrel .41 Magnum, see if you can find a .41 Magnum Mountain Gun. However, you are limited to a 4" barrel.

If you do want to go ahead with a conversion, try Alan Harton down in Houston. He did a M28 to .44 Special for me. I did send him a 6 1/2" factory barrel though. He also did two Old Model Ruger .357 Blackhawks to .44 Special as well.

I have heard that Turnbull no longer does S&W work.

Back when Skeeter Skelton was having .45 Colt conversions done, he did run into a few cylinders that had overly deep notches. A few dimpled and one actually bored through.
__________________
John 3:16
WAR EAGLE!
Reply With Quote
The Following User Likes This Post:
  #26  
Old 03-20-2017, 08:51 PM
Gripgrabber's Avatar
Gripgrabber Gripgrabber is offline
US Veteran
Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2???  
Join Date: Oct 2014
Location: Brooksville, FL
Posts: 727
Likes: 4,447
Liked 991 Times in 372 Posts
Default

Hello RED RIDE, I to LOVE 41 mag, and can't Find enough of them, I to have a 28-2,4", and lucky to find a cherry 57-1, 6". And a first year Blackhawk 3 screw,4 5/8". I think the 41mag is a cal for reloaders like me. I cast and load.
I'm glad you said you would keep your 28'. Just look around and you can find 57's, got mine for 700 last year, and P&R.
Good luck
SEMPER PARATUS
__________________
NRA Life Member
CPO
Reply With Quote
The Following User Likes This Post:
  #27  
Old 03-22-2017, 06:18 PM
franzas's Avatar
franzas franzas is offline
Member
Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2??? Re-chamber my 28-2???  
Join Date: Jun 2013
Location: Richmond, VA
Posts: 587
Likes: 378
Liked 333 Times in 179 Posts
Default

If you're going to rechamber, go 10mm!
__________________
an actual conservative
Reply With Quote
  #28  
Old 03-23-2017, 11:45 PM
Boxhead Boxhead is offline
Member
 
Join Date: Jul 2004
Location: Either Texas or Idaho
Posts: 530
Likes: 1
Liked 788 Times in 182 Posts
Default

Why not?



Reply With Quote
The Following User Likes This Post:
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
One in the chamber? pcgunner Concealed Carry & Self Defense 168 06-02-2017 04:57 PM
One in the Chamber Kizer Smith & Wesson M&P Pistols 20 06-06-2015 09:02 AM
One in the chamber.... Rogue Wizard The Lounge 31 02-17-2015 11:31 AM
S&W Tip-up 5 Chamber crustyosc S&W Antiques 4 09-01-2014 08:54 PM
One in the Chamber BBauer927 Concealed Carry & Self Defense 48 06-26-2013 06:59 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 07:18 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)