Picked up a Model 53 and I need the 22 jet cylinder to make it work..Thanks TJ

Do You have the 22 LR cylinder? You might have better luck dating a supermodel than finding a jet cylinder. Good Luck is Your search.

I have never seen a 22jet cylinder
advertised for sell. Lots of luck
Even a .22 cylinder will be hard
to find it is the same length
as a mod. 19 cylinder I believe
Dave.357

I agree with my two friends about both the cylinder and the supermodel.
I have 11 Model 53's, had some of them 30 years or more. I never seen one for sale. As far as the supermodel, I dumped her when she said "it's your guns or me." Her name was Christie. I named one of my new (Super) Model 53's after her.

__________________
Don Mundell

I know how you feel. I've been looking for a unicorn, and a chicken with teeth...

__________________
Pisgah

Could you maybe elaborate a little on your situation? Does the gun have a cylinder in it at all? Did you buy it with a 22lr cylinder in it? Did you buy it with box? Do you have the inserts that come with it to shoot 22lr? If you have it with a 22lr cylinder at least you can shoot it. Maybe finding a 22mrf cylinder is a lot easier but not sure if that would work in gun? Going to be VERY dificult finding a 22 jet cylinder as everybody said.

Stranger things have happened, but I wouldn't place any large bets on finding one... OTOH, if you have the 22 LR cylinder, it is the right length to have rebored to 22 Jet, unlike a standard K-22 or 22 MRF cylinder which is significantly shorter. Also, if you can find one of the "blank" cylinders Hamilton Bowen sold until fairly recently, I understand that they are long enough... unfortunately he is no longer selling them.

Froggie

Are you in Alaska? I know one model 53 was recently taken to a local gun shop or two with this same question about obtaining the correct cylinder in 22 Jet.. Wish I could help with that but everything Jet is difficult to find and expensive and you will find to play with it you have to be dedicated to the "cause". Yes, there fun and will blast your ears apart if you do not take proper care of them! Good luck! Kyle

If you are on a quest for a 22 Jet and have a cylinder-less frame, buying a proper (long) 22lr cylinder and having it rebored will be your most straightforward strategy. Regardless of what else you do, the gun will be a “put-together” example, so if you use an altered cylinder, you’ll be about as well off as any other way you could go. Regardless, good luck on that.

Froggie

My model 53 had the 22LR cyl in it when I purchased. I have seen 22 mag cylinders but they were cut from a 22lr Cyl ..I Saw for sale a SUPER JET with reloading dies, it is a jet cyl. that was re-cut to make the round more like a rifle round (FAST TAPER) helps with ejecting it was priced almost $3000, Last 22 Jet cyl's I saw were one on Ebay 1 sold for-$130 (Missed it) and another on G.Broker selling with all parts except frame and grips for over $500.(Out bid)..I have one on the line I shall see later today if it comes true.. I load and shoot my jet all the time, I Cut a lee 223 Factory crimp die to use on the jet reloads, they stay put now... I have some standard hammers in stock, along with a firing pin for rim fire.

I Got one lined up, Jet cyl that is...

I married a super model, but she grew old with me...She's still super......
(I hope she reads this)

The jet Cyl 's are 1.850 long NO other 22 cylinder mfg by S&W is that long so ONLY a jet will work..
I know a guy that cut the front off a 22 cyl. welded it to a standard K frame 22 cyl .

Alaska, never been there, I wanted to go in 1959 when they had homestead act. But My dad would not let me go I was 10..G Broker has a few 53 guns for sale mostly priced too high..THANKS PAL, TJ

Thank you all for your response, So many people willing to help overwhelms me.I joined S&W needing a cylinder, Hoped I would find one, BUT I did find people willing to help. Think I'll stick around, My 1st time on any "CHAT" line, Yes looks like fun also...THANK YOU ALL! TJ

Do Not post any ads or auctions here.


from the rules-
11. NO Links to current or upcoming auctions or promotion of current or upcoming auctions or discussion of current or upcoming auctions, even in vague and general terms, or GunsAmerica ads, Guns International ads, or other internet listing sites should be posted without permission.
Do NOT participate in discussion of current auctions or ads.
Links to CLOSED auctions and ads are permitted.
ADS selling or trading items on the public forum MUST be placed in the proper classified ad section.
Do NOT place ads in any other section of the public forum without prior permission.

__________________
Regards,
Lee Jarrett

What's a S&W Jet Cylinder ???
Photos pretty please ?

Cylinder is same length as mod 19's
1.67 . I had a cylinder from a 19
and a set of home made 22mag
Inserts .made me nervous afrade
Someone would drop a .357 in it
Sold to a fellow who said he would
Silver solder inserts in. He is probably
On this fourm

… Hi, jacala:
Here are photos of a jet cylinder using a mirror to show both ends. Go to the internet and call up Smith & Wesson model 53 to see the whole set-up of this unusual revolver.
-Don

Attached Images

	jet (1).jpg (63.7 KB, 64 views)
	jet (2).jpg (50.1 KB, 56 views)

For those who have never examined a Model 53, this photo should give you an idea of what was involved.

Attached Images

Model 53 with Jet and .22 Ammo Collage pic.jpg (121.7 KB, 45 views)

Others pics, if someone likes it....it's my 53 6"

Attached Images

	IMG_0626.jpg (128.4 KB, 17 views)
	mod 53-4.jpg (31.7 KB, 18 views)
	IMG_0407.jpg (28.7 KB, 16 views)
	mod 53-2.jpg (40.9 KB, 18 views)
	mod 53-3.jpg (25.5 KB, 17 views)

And the peculiar firing pin and relative hammer selector :

Attached Images

	Schermata 2018-08-13 alle 16.24.06.jpg (17.1 KB, 15 views)
	Schermata 2018-08-13 alle 16.24.34.jpg (20.3 KB, 15 views)