Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Revolvers > S&W Revolvers: 1961 to 1980
o

Notices

S&W Revolvers: 1961 to 1980 3-Screw PINNED Barrel SWING-OUT Cylinder Hand Ejectors WITH Model Numbers


Reply
 
Thread Tools Display Modes
  #1  
Old 09-11-2020, 09:05 PM
walldj45 walldj45 is offline
Member
What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: Sep 2020
Posts: 1
Likes: 0
Liked 9 Times in 1 Post
Default What do I have here? Nickel or Chrome 28-2

I hope this is in the right sub-forum. I picked this up a few months ago and haven't gotten around to looking it up. It appears to be a 28-2 with a relatively early SN but I don't know what year. I'm guessing this is a refinished gun since the nickel factory ones are so rare, were there any factory chrome guns? Regardless I like that the left the ejector star, hammer and trigger in the original. The trigger and hammer look almost case hardened? I apologize for the cell phone pictures but they're all I have for now, any info would be appreciated!







Reply With Quote
The Following 9 Users Like Post:
  #2  
Old 09-11-2020, 09:12 PM
rwadley1 rwadley1 is offline
Member
What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: Dec 2018
Location: North Carolina
Posts: 349
Likes: 807
Liked 1,033 Times in 195 Posts
Default

I'm not an expert, but factory nickel guns are usually stamp with an "N" on the back of the cylinder where yours is stamped "H".

They also usually have an "N" stamp under the stocks.
Reply With Quote
The Following User Likes This Post:
  #3  
Old 09-11-2020, 09:14 PM
RGNewell's Avatar
RGNewell RGNewell is offline
SWCA Member
What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: Oct 2012
Location: San Antonio, Texas
Posts: 978
Likes: 489
Liked 2,132 Times in 518 Posts
Default

I would get a letter

Sent from my SM-N960U using Tapatalk
Reply With Quote
  #4  
Old 09-11-2020, 09:45 PM
murphydog's Avatar
murphydog murphydog is offline
Moderator
What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: Jun 2007
Posts: 26,782
Likes: 936
Liked 18,875 Times in 9,241 Posts
Default

Welcome! The serial number indicates it was likely made in 1972.

As you know, factory nickel model 28s are rare, and their serial numbers are known; someone who has them should be along shortly. It is in the known SN range as I recall.

The H stamped on the rear cylinder face indicates the part was supposed to have a matte (instead of polished) blue finish.
__________________
Alan
SWCA LM 2023, SWHF 220
Reply With Quote
The Following 2 Users Like Post:
  #5  
Old 09-11-2020, 11:20 PM
Injunbro Injunbro is offline
Member
What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: Jul 2010
Location: Arizona
Posts: 365
Likes: 3,062
Liked 779 Times in 238 Posts
Default

To answer your questions: Case hardened hammer & trigger is normal for factory nickel plated guns. I've never heard of factory chromed guns, I doubt yours is. Most likely yours is a refinish.
Reply With Quote
  #6  
Old 09-11-2020, 11:55 PM
JP@AK's Avatar
JP@AK JP@AK is offline
US Veteran
What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: Mar 2011
Location: Palmer, Alaska
Posts: 14,478
Likes: 5,112
Liked 18,983 Times in 6,863 Posts
Default

S&W did experiment with chrome for a short while, but not on the Highway Patrolman.

The jury is out, but I tend to doubt that is factory nickel. Also, the GA target stocks are not original. Nice though.
__________________
Jack
SWCA #2475, SWHF #318
Reply With Quote
  #7  
Old 09-12-2020, 12:04 AM
kraynky's Avatar
kraynky kraynky is offline
Member
What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: Mar 2013
Location: Central Kentucky
Posts: 3,081
Likes: 11,368
Liked 5,118 Times in 1,946 Posts
Default

Good looking HP, whatever it turns out to be. Know any history about it? Is it a recent purchase for you? I like it, a lot.
Reply With Quote
The Following User Likes This Post:
  #8  
Old 09-12-2020, 06:11 AM
ACORN's Avatar
ACORN ACORN is offline
Member
What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: Jan 2004
Location: North Huntingdon Pa.
Posts: 4,500
Likes: 7,612
Liked 9,927 Times in 2,933 Posts
Default

Looks righteous to me, but what do I know?
If it’s a refinish it looks to be well done.
It looks like nickel also. To my eyes nickel has a slight yellow cast.
__________________
I told you not to use Lifebuoy

Last edited by ACORN; 09-12-2020 at 06:47 AM.
Reply With Quote
  #9  
Old 09-12-2020, 07:04 AM
boykinlp's Avatar
boykinlp boykinlp is offline
Member
What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: Apr 2008
Location: South Carolina
Posts: 7,219
Likes: 18,393
Liked 11,062 Times in 3,291 Posts
Default

Wow OP,
That is quite a first post! The gun looks very well done to me. Thanks for sharing. I, too, would like to know what history you know on the gun. Getting a letter is definitely a good idea.
Larry
__________________
Miss My Buddy crsides!!
Reply With Quote
  #10  
Old 09-12-2020, 07:18 AM
OLDSTER's Avatar
OLDSTER OLDSTER is offline
Member
What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: Aug 2012
Location: North Dakota
Posts: 10,146
Likes: 14,187
Liked 12,739 Times in 3,480 Posts
Default

Looks like a pretty darn good refinish. Welcome from North Dakota
__________________
John
Reply With Quote
  #11  
Old 09-12-2020, 08:16 AM
Jack Flash's Avatar
Jack Flash Jack Flash is online now
Member
What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: May 2005
Location: Michigan
Posts: 9,292
Likes: 33,754
Liked 10,946 Times in 3,945 Posts
Default

There were about 25 made up for the Florida Highway Patrol, but they had 5" barrels. Besides, they were shipped in 1959 and the 28-2 did not debut until 1961. S/N range is S189071 to S192687. All this is from the SCoS&W by Supica and Nahas.

Supposedly there were some nickel salesmen's samples made up, but I don't remember the details about those.
__________________
They lack our altruism.
Reply With Quote
The Following User Likes This Post:
  #12  
Old 09-12-2020, 08:47 AM
Doc44's Avatar
Doc44 Doc44 is offline
Moderator

What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: Dec 2002
Location: Indiana, USA
Posts: 9,384
Likes: 1,316
Liked 30,337 Times in 4,353 Posts
Default

Your Model 28-2 has been refinished in nickel outside the S&W factory as the company did not offer a change of finish on this model. The fifty-four Model 28-2s with a brush nickel finish were shipped in July 1972 and have serial numbers in a much higher range. Your Model 28-2 dates to 1971.

Bill
Reply With Quote
The Following 6 Users Like Post:
  #13  
Old 09-12-2020, 09:20 AM
Jack Flash's Avatar
Jack Flash Jack Flash is online now
Member
What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: May 2005
Location: Michigan
Posts: 9,292
Likes: 33,754
Liked 10,946 Times in 3,945 Posts
Default

If it dates to 1971, wouldn't that mean the non-diamond football target stocks could be original?
__________________
They lack our altruism.
Reply With Quote
The Following 2 Users Like Post:
  #14  
Old 09-12-2020, 09:39 AM
stansdds stansdds is online now
Member
What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: Apr 2007
Location: Virginia
Posts: 8,713
Likes: 19,282
Liked 11,734 Times in 5,351 Posts
Default

I expect that is an aftermarket nickel finish, but it appears to have been very well done, keeping the hammer and trigger in their case hardened finish like S&W did with their factory plating. I would take off the stocks and look at the grip frame, is there an "N" or "RN" stamped on it near the bottom on the left side? "N" indicates factory nickel, "RN" indicates factory refinish in nickel.
__________________
VCDL, GOA, NRA
Reply With Quote
The Following User Likes This Post:
  #15  
Old 09-12-2020, 10:03 AM
Minorcan Minorcan is offline
Member
What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: Apr 2018
Location: Georgia
Posts: 244
Likes: 533
Liked 292 Times in 138 Posts
Default

Very nice gun you have there. I have a nickel Model 27 that is a former Florida HiWay Patrol gun. Some LEs valued style too. Not having a “N” stamped on the frame and cyl makes it not likely as a factory nickel job. I wouldn’t be surprised if a LE had his Model 28 nickel plated.
__________________
I invest in Lead and Copper!

Last edited by Minorcan; 09-12-2020 at 10:04 AM.
Reply With Quote
  #16  
Old 09-12-2020, 10:57 AM
Hair Trigger's Avatar
Hair Trigger Hair Trigger is offline
US Veteran
What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: Feb 2016
Location: western NC
Posts: 3,041
Likes: 2,532
Liked 6,852 Times in 2,139 Posts
Default

Quote:
Originally Posted by Jack Flash View Post
If it dates to 1971, wouldn't that mean the non-diamond football target stocks could be original?
M28's came standard with magna stocks.

Quote:
Originally Posted by walldj45 View Post
Regardless I like that the left the ejector star, hammer and trigger in the original.
Ejector stars weren't nickel plated because of close tolerances and being a fitted part, from my understanding. My nickel M29's ejector star is not plated, and it is a factory plate job. No need to plate a part that isn't seen unless the cylinder is open, much like why the inside edges of the gantry and breech face don't get the same level of finish as the outside of the gun.
Reply With Quote
The Following User Likes This Post:
  #17  
Old 09-12-2020, 11:09 AM
STCM(SW)'s Avatar
STCM(SW) STCM(SW) is offline
US Veteran
What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: Mar 2012
Location: E. Washington State
Posts: 5,475
Likes: 1,321
Liked 10,568 Times in 3,212 Posts
Default

Looks similar to mine and mine is not one of the rare one's either...
Attached Images
File Type: jpg M28-2 390.jpg (60.1 KB, 61 views)
__________________
Only difference Fool/Mule-ears
Reply With Quote
The Following 2 Users Like Post:
  #18  
Old 09-12-2020, 11:14 AM
RGNewell's Avatar
RGNewell RGNewell is offline
SWCA Member
What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: Oct 2012
Location: San Antonio, Texas
Posts: 978
Likes: 489
Liked 2,132 Times in 518 Posts
Default

Quote:
Originally Posted by Hair Trigger View Post
M28's came standard with magna stocks.







Ejector stars weren't nickel plated because of close tolerances and being a fitted part, from my understanding. My nickel M29's ejector star is not plated, and it is a factory plate job. No need to plate a part that isn't seen unless the cylinder is open, much like why the inside edges of the gantry and breech face don't get the same level of finish as the outside of the gun.
The only way to tell about stocks is a letter. I have a 1st year May 54 that came with diamond targets.

Sent from my SM-N960U using Tapatalk
Reply With Quote
The Following 2 Users Like Post:
  #19  
Old 09-12-2020, 11:33 AM
Art Doc's Avatar
Art Doc Art Doc is offline
SWCA Member
Absent Comrade
What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: Jul 2002
Location: The kidney of Dixie.
Posts: 10,509
Likes: 49
Liked 13,409 Times in 3,290 Posts
Default

"The H stamped on the rear cylinder face indicates the part was supposed to have a matte (instead of polished) blue finish."

Learn something new everyday. Wonder why H and not M?
__________________
No life story has happy end.
Reply With Quote
  #20  
Old 09-12-2020, 11:41 AM
OFT II's Avatar
OFT II OFT II is offline
US Veteran
What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: Aug 2009
Location: Odessa, Texas
Posts: 3,219
Likes: 4,023
Liked 3,698 Times in 1,466 Posts
Default

Quote:
Originally Posted by Art Doc View Post
"The H stamped on the rear cylinder face indicates the part was supposed to have a matte (instead of polished) blue finish."

Learn something new everyday. Wonder why H and not M?
Highway Patrolman?
Reply With Quote
  #21  
Old 09-12-2020, 12:04 PM
Jack Flash's Avatar
Jack Flash Jack Flash is online now
Member
What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: May 2005
Location: Michigan
Posts: 9,292
Likes: 33,754
Liked 10,946 Times in 3,945 Posts
Default

Quote:
Originally Posted by Jack Flash View Post
If it dates to 1971, wouldn't that mean the non-diamond football target stocks could be original?
Quote:
Originally Posted by Hair Trigger View Post
M28's came standard with magna stocks.
...
One of the two options for this model was Target Stocks. The other being 4 or 6 inch barrel length.
__________________
They lack our altruism.
Reply With Quote
  #22  
Old 09-12-2020, 12:49 PM
Club Gun Fan's Avatar
Club Gun Fan Club Gun Fan is offline
S&W Historian
What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: Jun 2008
Location: Massachusetts
Posts: 5,944
Likes: 3,381
Liked 11,297 Times in 2,884 Posts
Default

If you decide to letter your gun, get the number off of the bottom of the butt, not off the crane.
Thanks
__________________
Don Mundell
Reply With Quote
  #23  
Old 09-12-2020, 01:00 PM
Hair Trigger's Avatar
Hair Trigger Hair Trigger is offline
US Veteran
What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: Feb 2016
Location: western NC
Posts: 3,041
Likes: 2,532
Liked 6,852 Times in 2,139 Posts
Default

Quote:
Originally Posted by OFT II View Post
Highway Patrolman?
^this. No stamp was blue M27, 'N' was nickel M27, 'H' was non-polished blue M28.

My gut tells me this is a nicely-done aftermarket nickel job, but I have no proof to back that up. It's a good-looking revolver, nontheless. A little Flitz and some elbow grease will make it look like bright chrome.
Reply With Quote
The Following 3 Users Like Post:
  #24  
Old 09-12-2020, 01:02 PM
ralph7's Avatar
ralph7 ralph7 is offline
Member
What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: Jul 2010
Location: Houston, Texas
Posts: 4,355
Likes: 9,210
Liked 6,387 Times in 2,214 Posts
Default

Quote:
Originally Posted by Hair Trigger View Post
M28's came standard with magna stocks.



Ejector stars weren't nickel plated because of close tolerances and being a fitted part, from my understanding. My nickel M29's ejector star is not plated, and it is a factory plate job. No need to plate a part that isn't seen unless the cylinder is open, much like why the inside edges of the gantry and breech face don't get the same level of finish as the outside of the gun.
Never heard this term applied to a gun, what or where is it?
Reply With Quote
  #25  
Old 09-12-2020, 02:26 PM
flagman1776's Avatar
flagman1776 flagman1776 is offline
Member
What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: Oct 2009
Location: Rhode Island
Posts: 2,000
Likes: 2,515
Liked 1,682 Times in 703 Posts
Default

I'm pretty sure some M28s were made in nickle. Hammer, trigger were color case hardened as yours is. Sights were blue as yours is. Nothing about this says to me that it's not factory nickle. The only way to confirm would be a letter of authenticity.
Nice piece.
__________________
NRA LIFE
Reserve Officer 9yrs
Reply With Quote
  #26  
Old 09-12-2020, 02:59 PM
Golphin's Avatar
Golphin Golphin is offline
Member
What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: Oct 2014
Location: Micanopy Florida
Posts: 1,536
Likes: 6,645
Liked 2,476 Times in 948 Posts
Default

Look a lot like mine.I picked mine up a number of years ago from a pawn shop. It had Altamonte stocks on it so I put the ones that are on it now rather than trying to match the originals as the larger stocks saves my finger when I shoot hot 357's than the original ones. My serial number starts with N5982--.
Attached Images
File Type: jpg S&W28-2.jpg (60.0 KB, 48 views)
File Type: jpg sw28-2.jpg (59.2 KB, 33 views)
Reply With Quote
The Following User Likes This Post:
  #27  
Old 09-12-2020, 06:11 PM
Hair Trigger's Avatar
Hair Trigger Hair Trigger is offline
US Veteran
What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2 What do I have here?  Nickel or Chrome 28-2  
Join Date: Feb 2016
Location: western NC
Posts: 3,041
Likes: 2,532
Liked 6,852 Times in 2,139 Posts
Default

Quote:
Originally Posted by ralph7 View Post
Never heard this term applied to a gun, what or where is it?
[Gantry]

I meant to say yoke, which is S&W's term for the part. I keep "crane" in my mind, but that's a Colt term, and a gantry is a sort of crane, but not applied to firearms. My brain does cruel things to my mouth sometimes, and my fingers are complicit when they type what my brain is thinking..

Last edited by Hair Trigger; 09-12-2020 at 06:12 PM.
Reply With Quote
The Following 3 Users Like Post:
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
5-screw Nickel Chrome Mr Barker S&W Hand Ejectors: 1896 to 1961 13 03-24-2015 12:47 PM
Chrome vs Nickel bobbyd S&W-Smithing 6 05-10-2013 03:50 PM
Nickel Versus Chrome semperfi71 The Lounge 10 11-08-2011 02:54 PM
Nickel or Chrome Sidney S&W-Smithing 22 05-21-2011 08:11 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 04:52 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)