Smith & Wesson Forum

Go Back   Smith & Wesson Forum > >

Notices

S&W Revolvers: 1961 to 1980 3-Screw PINNED Barrel SWING-OUT Cylinder Hand Ejectors


Reply
 
Thread Tools Display Modes
  #1  
Old 11-11-2020, 04:39 PM
Adupuy Adupuy is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Nov 2018
Posts: 60
Likes: 20
Liked 47 Times in 15 Posts
Default Safe ammo for a 27-2

I finally found an unfired 27-2 made in 1978. I paid a fair price for it, but it doesn't have a presentation case or anything. That's OK with me, because I'm going to shoot it occasionally. No closet queens for me. I lucked out and my buddy hooked me up with some 38 spl wadcutters for target practice. I know they'll require a good barrel cleaning to get the lead out but I've been told they're safe for the longevity of the barrel. However, what's a good recommendation for a 357 hunting/defense round? Fusion makes a bonded copper bullet, but I'm hesitant to shoot a modern copper bullet out of my nice 27. Ammo is super scarce , but when i find a few boxes of suitable 357 magnum I'm going to buy them. Are there any care and maintenance considerations for a mostly glock owner such as myself? How about a holster that will gentle on the shiny bluing? Also, off topic but I just finished Smith and Wesson Hand Guns by Roy McHenry and it was great!
Reply With Quote
The Following User Likes This Post:
  #2  
Old 11-11-2020, 04:45 PM
Sevens Sevens is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Mar 2015
Location: Ohio
Posts: 5,239
Likes: 5,376
Liked 8,224 Times in 3,085 Posts
Default

Well, assuming that all is well with your 27-2 now before -ANY- ammo goes through it, understand that you are holding (arguably... and we do!) the largest and most stout .357 Magnum that Smith & Wesson ever made.

As long as your ammo is .38 Special, .38 Special+P or .357 Magnum from a SAAMI source, then there is no ammo that will hurt your revolver, assuming the ammo is exactly what it is advertised to be.

Unfortunately, there exists no holster that I have ever heard of that won't, over time and use, leave marks on the gorgeous polished finish of a Model 27. However if your revolver isn't mint/unfired/NIB, then don't sweat the small things and carry it, shoot it, LOVE IT and don't worry about it.
Reply With Quote
The Following 8 Users Like Post:
  #3  
Old 11-11-2020, 05:14 PM
Muley Gil Muley Gil is offline
US Veteran
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Feb 2005
Location: The SW Va Blue Ridge
Posts: 14,141
Likes: 52,062
Liked 16,514 Times in 5,992 Posts
Default

You have bought the finest, IMNSHO, .357 revolver ever built. As above, no sane factory loaded round will damage it. BTW, what barrel length is it?

My favorite holster is the lined Model 29 made by Safariland. Not sure they make them anymore, but I'll bought several off of eBay. Look for ones marked S&W LG FR (large frame). Make sure you buy a leather holster. Safariland started making holsters out of some sort of synthetic a while back and they don't hold up as well as real old fashioned cowhide.
__________________
John 3:16
WAR EAGLE!
Reply With Quote
The Following 6 Users Like Post:
  #4  
Old 11-11-2020, 05:28 PM
Nightowl's Avatar
Nightowl Nightowl is offline
SWCA Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Apr 2004
Location: Warrensburg, MO USA
Posts: 4,677
Likes: 1,498
Liked 2,145 Times in 1,189 Posts
Default

I certainly agree on the Safariland model 29, but also consider the model 25. The 29 is a thumb break and the model 25 is the hammer strap version. Find on that is lined with elk suade. If you have a 5 inch barrel, it will be difficult to find either one. The 6, 6 1/2 inch version is the most common, and maybe four inch.
__________________
Richard Gillespie
FBINA 102
Reply With Quote
The Following User Likes This Post:
  #5  
Old 11-11-2020, 05:32 PM
moosedog moosedog is online now
SWCA Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Feb 2003
Location: Michigan
Posts: 6,418
Likes: 6,744
Liked 9,128 Times in 2,351 Posts
Default

Unless you personally know the source, never use reloaded ammunition and that includes wadcutter target ammo.
Reply With Quote
The Following 5 Users Like Post:
  #6  
Old 11-11-2020, 05:35 PM
Jack Flash's Avatar
Jack Flash Jack Flash is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: May 2005
Location: Michigan
Posts: 8,493
Likes: 26,465
Liked 9,213 Times in 3,380 Posts
Default

Since the M27 has adjustable sights, any bullet weight you settle on is fine. I personally like 158 grain .357 Magnum jacketed soft points or hollow points. Some very knowledgeable people like the higher velocity you get from 110 grain or 125 grain bullets.
__________________
They lack our altruism.
Reply With Quote
The Following 4 Users Like Post:
  #7  
Old 11-11-2020, 06:23 PM
Valmet's Avatar
Valmet Valmet is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Jul 2012
Location: Richmond, Virginia
Posts: 2,766
Likes: 1,810
Liked 2,371 Times in 1,267 Posts
Default

Quote:
Originally Posted by moosedog View Post
Unless you personally know the source, never use reloaded ammunition and that includes wadcutter target ammo.
+1. But when it comes to factory ammo, your 27-2 will digest anything just fine. Get out there and enjoy it!
__________________
Some Might Say.
Reply With Quote
The Following 5 Users Like Post:
  #8  
Old 11-11-2020, 06:29 PM
mod29's Avatar
mod29 mod29 is online now
Member
 
Join Date: Mar 2002
Location: WA
Posts: 529
Likes: 1,336
Liked 529 Times in 233 Posts
Default

Quote:
Originally Posted by Jack Flash View Post
Since the M27 has adjustable sights, any bullet weight you settle on is fine. I personally like 158 grain .357 Magnum jacketed soft points or hollow points. Some very knowledgeable people like the higher velocity you get from 110 grain or 125 grain bullets.

Agreed. Hard to beat the standard 158-gr magnum loads from any of the major ammo manufacturers (Remington, Winchester, etc).

Jacketed hollow points or jacketed soft points, they will get the job done.
Reply With Quote
The Following 4 Users Like Post:
  #9  
Old 11-11-2020, 07:02 PM
Hair Trigger's Avatar
Hair Trigger Hair Trigger is offline
US Veteran
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Feb 2016
Location: western NC
Posts: 443
Likes: 293
Liked 926 Times in 274 Posts
Default

Quote:
Originally Posted by Adupuy View Post
I finally found an unfired 27-2 made in 1978. I paid a fair price for it, but it doesn't have a presentation case or anything. That's OK with me, because I'm going to shoot it occasionally. No closet queens for me. I lucked out and my buddy hooked me up with some 38 spl wadcutters for target practice. I know they'll require a good barrel cleaning to get the lead out but I've been told they're safe for the longevity of the barrel. However, what's a good recommendation for a 357 hunting/defense round? Fusion makes a bonded copper bullet, but I'm hesitant to shoot a modern copper bullet out of my nice 27. Ammo is super scarce , but when i find a few boxes of suitable 357 magnum I'm going to buy them.
It will eat anything commercial you care to feed it, and ask for seconds. I have your model's 'ugly' sister, the M28, and I've run some close-to-max loads through it without issues. If you shoot a lot of .38 Spl loads, what you watch for is a crust buildup in the chamber from the burned powder. all revolvers will develop it if not cleaned frequently, but in a magnum revolver, this crust line forms at a shorter distance from the breech, which can make seating full-length .357 loads difficult. The .357 case is around 0.135" longer than a .38 Spl case. Cleaning after each shooting usually prevents this. Modern copper jacketed bullets cause no harm to the barrel at all.

Kydex is a NO for a holster for it, nylon is also a no, unless it has a padded cloth lining. leather is better and traditional, but will also cause wear after a lot of in and out use. Custom saddlers who make holsters will line them if so ordered, which is a plus. Whatever you get, don't store the gun in the holster, they all retain moisture. get a silicone-impregnated gun sock if you want something to keep it in while in the safe, or hang it by a holder that uses a rod in the barrel.
Reply With Quote
The Following 3 Users Like Post:
  #10  
Old 11-11-2020, 07:28 PM
Adupuy Adupuy is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Nov 2018
Posts: 60
Likes: 20
Liked 47 Times in 15 Posts
Default

Thanks for the replies! All useful info. It's a 6 inch barrel. I wish I could find the holster maker that i used for my 4506 leather holster. Unfortunately he seems to have shut down. One more question. What's the best tool to use to clean the cylinder where the bullets are seated? Will the bore brush suffice?
Reply With Quote
The Following User Likes This Post:
  #11  
Old 11-11-2020, 07:49 PM
Adupuy Adupuy is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Nov 2018
Posts: 60
Likes: 20
Liked 47 Times in 15 Posts
Default

Hughes holsters was what i used for my 4506. Great leather! It's too bad I can't find him anymore. Y'all ever used don humes? The safariland holsters mentioned aren't available anymore.
Reply With Quote
  #12  
Old 11-11-2020, 09:03 PM
rubiranch's Avatar
rubiranch rubiranch is offline
SWCA Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Mar 2018
Location: Utah
Posts: 5,587
Likes: 12,668
Liked 16,518 Times in 3,787 Posts
Default

Congratulations on your new 27-2.

I've never fired any .38 ammo in any of my .357s except my 640-1 when it was my EDC.

I've shot more 125 gr than any other ammo. My 6.5" 27 loves it.
__________________
Kenny
Endeavor to persevere.
Reply With Quote
The Following 2 Users Like Post:
  #13  
Old 11-11-2020, 09:10 PM
Sevens Sevens is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Mar 2015
Location: Ohio
Posts: 5,239
Likes: 5,376
Liked 8,224 Times in 3,085 Posts
Default

If you have a proper fitting solid tip screwdriver or bits that you can use to carefully remove the most forward screw on the right side of the revolver, taking this screw out will allow you to remove the yoke and with it, the cylinder will come off the yoke.

I personally believe that it is better to pull the cylinder from the revolver rather than put frenetic forward energy in to scrubbing chambers while the cylinder is mounted.

Others may disagree.
Reply With Quote
The Following User Likes This Post:
  #14  
Old 11-11-2020, 09:31 PM
Pine_Worker's Avatar
Pine_Worker Pine_Worker is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Oct 2007
Location: Central Texas
Posts: 902
Likes: 1,288
Liked 964 Times in 406 Posts
Default

I agree with all the above. The 27 can more than handle any commercially loaded 357 ammo, I prefer 158 grain jacketed hollow points myself. As for a holster, any quality lined leather should work, but all will eventually wear the bluing. How about posting a few pics?
__________________
Pine_Worker
NRA Life Member
Reply With Quote
The Following User Likes This Post:
  #15  
Old 11-11-2020, 09:55 PM
growr growr is offline
Member
 
Join Date: Nov 2006
Location: Montana
Posts: 4,310
Likes: 2,504
Liked 4,136 Times in 1,535 Posts
Default

Take a serious look at lobogunleather.com.....outstanding product with reasonable pricing and very short wait times.
Have 4 of their holsters and am very pleaded.

Randy

PS. Your 27 will safely handle any available .357 mag. ammo with NO problems. Be not concerned with copper jacketed projectiles......
Reply With Quote
The Following User Likes This Post:
  #16  
Old 11-12-2020, 07:36 AM
Adupuy Adupuy is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Nov 2018
Posts: 60
Likes: 20
Liked 47 Times in 15 Posts
Default

Quote:
Originally Posted by Sevens View Post
If you have a proper fitting solid tip screwdriver or bits that you can use to carefully remove the most forward screw on the right side of the revolver, taking this screw out will allow you to remove the yoke and with it, the cylinder will come off the yoke.

I personally believe that it is better to pull the cylinder from the revolver rather than put frenetic forward energy in to scrubbing chambers while the cylinder is mounted.

Others may disagree.
Absolutely I agree. There's a GREAT older S and W armorer on YouTube that explains that. Most YouTube tutorials are awful but he's great. I was more asking what particular tool would be best for cleaning the inside of the cylinders.
Reply With Quote
  #17  
Old 11-12-2020, 07:37 AM
Adupuy Adupuy is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Nov 2018
Posts: 60
Likes: 20
Liked 47 Times in 15 Posts
Default

Quote:
Originally Posted by Pine_Worker View Post
I agree with all the above. The 27 can more than handle any commercially loaded 357 ammo, I prefer 158 grain jacketed hollow points myself. As for a holster, any quality lined leather should work, but all will eventually wear the bluing. How about posting a few pics?
As soon as my FFL receives it I will post pics!
Reply With Quote
The Following User Likes This Post:
  #18  
Old 11-12-2020, 07:56 AM
Adupuy Adupuy is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Nov 2018
Posts: 60
Likes: 20
Liked 47 Times in 15 Posts
Default

Can anyone direct me to a correct size "hollow ground " screwdriver for the grip and side plate screws? Oh and the yoke screw. They may all be the same size screw head I'm not sure.
Reply With Quote
  #19  
Old 11-12-2020, 08:18 AM
BigBill BigBill is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Jan 2011
Location: america
Posts: 12,705
Likes: 1,760
Liked 11,720 Times in 4,905 Posts
Default

The s&w can handle Cor-bon ammo? Iím reluctant to shoot full house loads from the s&w in 357?
__________________
Plant garlic in the fall

Last edited by BigBill; 11-12-2020 at 08:19 AM.
Reply With Quote
  #20  
Old 11-12-2020, 08:24 AM
Truckman's Avatar
Truckman Truckman is online now
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Nov 2020
Location: Conroe Texas...
Posts: 128
Likes: 0
Liked 208 Times in 65 Posts
Default

Quote:
Originally Posted by Adupuy View Post
I was more asking what particular tool would be best for cleaning the inside of the cylinders.
I keep my worn out .44/.45 caliber brushes for the purpose of scrubbing out cylinder bores......Ben
Reply With Quote
The Following 3 Users Like Post:
  #21  
Old 11-12-2020, 08:26 AM
gfors's Avatar
gfors gfors is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Apr 2017
Location: Northern Colorado
Posts: 491
Likes: 1,059
Liked 1,700 Times in 291 Posts
Default

Quote:
Originally Posted by Adupuy View Post
Can anyone direct me to a correct size "hollow ground " screwdriver for the grip and side plate screws? Oh and the yoke screw. They may all be the same size screw head I'm not sure.
There are 4 different sized screw heads that a Smith revolver uses. You can find a set of bits at Brownellís or Numrich.
Reply With Quote
  #22  
Old 11-12-2020, 08:29 AM
gfors's Avatar
gfors gfors is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Apr 2017
Location: Northern Colorado
Posts: 491
Likes: 1,059
Liked 1,700 Times in 291 Posts
Default

You’ll also want to get a tool for loosening and tightening the ejector rod (remember too, that it’s a left hand thread).
Reply With Quote
  #23  
Old 11-12-2020, 08:29 AM
Adupuy Adupuy is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Nov 2018
Posts: 60
Likes: 20
Liked 47 Times in 15 Posts
Default

Quote:
Originally Posted by gfors View Post
There are 4 different sized screw heads that a Smith revolver uses. You can find a set of bits at Brownellís or Numrich.
Do you know the sizes off the top of your head?
Reply With Quote
  #24  
Old 11-12-2020, 08:29 AM
Adupuy Adupuy is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Nov 2018
Posts: 60
Likes: 20
Liked 47 Times in 15 Posts
Default

Quote:
Originally Posted by gfors View Post
Youíll also want to get a tool for loosening and tightening the ejector rod (remember too, that itís a left hand thread).
Is that a specialty tool?
Reply With Quote
  #25  
Old 11-12-2020, 08:32 AM
gfors's Avatar
gfors gfors is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Apr 2017
Location: Northern Colorado
Posts: 491
Likes: 1,059
Liked 1,700 Times in 291 Posts
Default

Sizes:
210-4
150-3
210-2
120-1
I didn’t remember them. Had a set sitting next to me.
Reply With Quote
The Following 2 Users Like Post:
  #26  
Old 11-12-2020, 08:33 AM
gfors's Avatar
gfors gfors is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Apr 2017
Location: Northern Colorado
Posts: 491
Likes: 1,059
Liked 1,700 Times in 291 Posts
Default

Quote:
Originally Posted by Adupuy View Post
Is that a specialty tool?
Yes. If you try to use a pliers, youíll bugger the rod or the knurling.
Reply With Quote
  #27  
Old 11-12-2020, 08:38 AM
Adupuy Adupuy is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Nov 2018
Posts: 60
Likes: 20
Liked 47 Times in 15 Posts
Default

Quote:
Originally Posted by gfors View Post
Sizes:
210-4
150-3
210-2
120-1
I didnít remember them. Had a set sitting next to me.
NICE!!! Thank you.
Reply With Quote
  #28  
Old 11-12-2020, 08:54 AM
Adupuy Adupuy is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Nov 2018
Posts: 60
Likes: 20
Liked 47 Times in 15 Posts
Default

Quote:
Originally Posted by Adupuy View Post
NICE!!! Thank you.
Nice, Brownells has a set of these bits for 9 dollars for all 4. I can probably figure out which size goes to what screw.
Reply With Quote
The Following User Likes This Post:
  #29  
Old 11-12-2020, 09:50 AM
Grayfox's Avatar
Grayfox Grayfox is online now
US Veteran
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Apr 2001
Location: Bartlett, Tennessee
Posts: 5,559
Likes: 1,468
Liked 11,271 Times in 3,183 Posts
Default

Quote:
What's the best tool to use to clean the cylinder where the bullets are seated?
Brownells has brushes specifically for cleaning revolver chambers. They're slightly bigger and longer and do a great job on stubborn crud in the chambers. Brownells Chamber brushes
Use standard brushes for the bore.

As others have said, that big N-frame will handle any commercial ammo you care to put in it.
Reply With Quote
The Following 2 Users Like Post:
  #30  
Old 11-12-2020, 10:50 AM
H Richard's Avatar
H Richard H Richard is offline
US Veteran
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Aug 2006
Location: West Central IL
Posts: 20,479
Likes: 13,240
Liked 17,100 Times in 6,659 Posts
Default

You have received some great advice, but one item I don't see addressed is protecting the finish of the revolver. Since you intend to carry it holstered, just the rubbing of taking the revolver in and out of the holster will (over time) cause wear marks. If you put a coating of wax on the revolver it can help protect these surfaces. A highly recommended was is Renaissance Wax. It is a neutral ph and will not yellow. It was developed in England to protect the antique armor, guns, etc of the British Monarchy. Other waxes can be used, but watch for any possibility of yellowing. The wax will be partially removed whenever you clean the revolver with solvent, so you will need to replace it from time to time.

Enjoy your 27, the Cadillac of S&W's.
__________________
H Richard
SWCA1967 SWHF244
Reply With Quote
The Following 3 Users Like Post:
  #31  
Old 11-12-2020, 11:35 AM
Adupuy Adupuy is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Nov 2018
Posts: 60
Likes: 20
Liked 47 Times in 15 Posts
Default

Quote:
Originally Posted by H Richard View Post
You have received some great advice, but one item I don't see addressed is protecting the finish of the revolver. Since you intend to carry it holstered, just the rubbing of taking the revolver in and out of the holster will (over time) cause wear marks. If you put a coating of wax on the revolver it can help protect these surfaces. A highly recommended was is Renaissance Wax. It is a neutral ph and will not yellow. It was developed in England to protect the antique armor, guns, etc of the British Monarchy. Other waxes can be used, but watch for any possibility of yellowing. The wax will be partially removed whenever you clean the revolver with solvent, so you will need to replace it from time to time.

Enjoy your 27, the Cadillac of S&W's.
Wow, thank you. I probably will only shoot this thing occasionally, but I really want it to be passed to my young sons in many years to come. If it sees a holster, it will only be at the range or while target shooting. I will definitely get the chamber bore brush and look into the wax.
Reply With Quote
  #32  
Old 11-12-2020, 05:53 PM
cmansguns's Avatar
cmansguns cmansguns is offline
US Veteran
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Mar 2016
Location: Hanover, Virginia
Posts: 1,151
Likes: 1,944
Liked 3,048 Times in 828 Posts
Default

Congrats OP, you've acquired the closest gun to a Registered Magnum that you can! The Model 27 is just not exceeded for fit, finish and quality of any S&W's in my humble opinion. Mine shoot any factory ammo but I like the 158 gr myself, and I don't reload.

I've got enough K Frame 38's so if the Magnums go out for exercise, they go with 357 ammo, and usually in a gun rug in a separate range bag.

My small stable of 357 magnums:

Pre Model 27, 6-1/2" shipped 10-16-1952
Model 27-2 Blue, 3-1/2" shipped 4-5-1977
Model 27-2 Nickle, 6" shipped 5-8-1980
Model 28, Satin Blue, 4" HP, shipped 10-13-1975

NOT PICTURED: My Registered Magnum, s/n, reg number, and ship date unknown cause even though 53 years of looking, drooling, close but no cigar... I can't find one I can afford.
Attached Thumbnails
Safe ammo for a 27-2-pre-27-d-jpg   Safe ammo for a 27-2-m27-2-b-full-size-jpg   Safe ammo for a 27-2-27-2-n17-jpg   Safe ammo for a 27-2-model-28-c1-jpg  
__________________
Charlie B
SWCA#3083, SWHF#570
Reply With Quote
The Following User Likes This Post:
  #33  
Old 11-12-2020, 08:49 PM
Jack Flash's Avatar
Jack Flash Jack Flash is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: May 2005
Location: Michigan
Posts: 8,493
Likes: 26,465
Liked 9,213 Times in 3,380 Posts
Default

Quote:
Originally Posted by BigBill View Post
The s&w can handle Cor-bon ammo? Iím reluctant to shoot full house loads from the s&w in 357?
I have never shot any. By reputation Cor-bon ammunition is all full throttle, with a full throttle price tag to match, but as long as it is within SAAMI specs, I would not hesitate to shoot it in any S&W N-Frame .357.

Cor-bon should also be safe in a K-Frame too but I don't think I would ever have any reason to try it.
__________________
They lack our altruism.
Reply With Quote
The Following 2 Users Like Post:
  #34  
Old 11-13-2020, 11:16 AM
Adupuy Adupuy is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Nov 2018
Posts: 60
Likes: 20
Liked 47 Times in 15 Posts
Default

Quote:
Originally Posted by cmansguns View Post
Congrats OP, you've acquired the closest gun to a Registered Magnum that you can! The Model 27 is just not exceeded for fit, finish and quality of any S&W's in my humble opinion. Mine shoot any factory ammo but I like the 158 gr myself, and I don't reload.

I've got enough K Frame 38's so if the Magnums go out for exercise, they go with 357 ammo, and usually in a gun rug in a separate range bag.

My small stable of 357 magnums:

Pre Model 27, 6-1/2" shipped 10-16-1952
Model 27-2 Blue, 3-1/2" shipped 4-5-1977
Model 27-2 Nickle, 6" shipped 5-8-1980
Model 28, Satin Blue, 4" HP, shipped 10-13-1975

NOT PICTURED: My Registered Magnum, s/n, reg number, and ship date unknown cause even though 53 years of looking, drooling, close but no cigar... I can't find one I can afford.
What a beautiful collection!!! I haven't found a single 357 bullet online. I had to get on a waiting list. I'll continue to look for 357 bullets.

Last edited by ditrina; 11-13-2020 at 12:59 PM.
Reply With Quote
  #35  
Old 11-13-2020, 06:39 PM
Doug M.'s Avatar
Doug M. Doug M. is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: May 2008
Location: Washington State
Posts: 5,738
Likes: 9,016
Liked 6,067 Times in 2,572 Posts
Default

While you can cause some wear on an N frame such your M27 with full bore .357 ammo, it takes a lot and you are likely to beat up your hands and arm joints (and your financial status) long before doing any damage to the firearm. My recommendation is that you not look too hard to find full bore ammo, but find ammo you can shoot and not beat the snot out of your body. Full bore ammo has a place in some settings, but in reality, even in self-defense use, placement is more important than anything else.
__________________
NHI, 10-8.
Reply With Quote
The Following User Likes This Post:
  #36  
Old 11-13-2020, 07:27 PM
Grayfox's Avatar
Grayfox Grayfox is online now
US Veteran
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Apr 2001
Location: Bartlett, Tennessee
Posts: 5,559
Likes: 1,468
Liked 11,271 Times in 3,183 Posts
Default

Quote:
I haven't found a single 357 bullet online. I had to get on a waiting list. I'll continue to look for 357 bullets.
Don't overlook hard cast lead bullets. You might be able to still find those. One of my pet loads for the .357 is a hard cast 158gr LSWC over 6.0 grs of W231. I've chronographed this load at just a shade over 1000fps out of my guns. Pleasant to shoot, doesn't lead up the barrel and is wonderfully accurate.
Reply With Quote
  #37  
Old 11-13-2020, 10:22 PM
OutWest50 OutWest50 is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Oct 2020
Location: Central Texas
Posts: 36
Likes: 38
Liked 135 Times in 17 Posts
Default

Quote:
Originally Posted by Grayfox View Post
Don't overlook hard cast lead bullets. You might be able to still find those. One of my pet loads for the .357 is a hard cast 158gr LSWC over 6.0 grs of W231. I've chronographed this load at just a shade over 1000fps out of my guns. Pleasant to shoot, doesn't lead up the barrel and is wonderfully accurate.
I purchased a box of Hunter's Supply 500 hard cast SWC's last week. I agree with the above post; don't overlook the SWC's, they have got the job done for many years.
Reply With Quote
  #38  
Old 11-14-2020, 01:22 PM
Adupuy Adupuy is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Nov 2018
Posts: 60
Likes: 20
Liked 47 Times in 15 Posts
Default

I'll keep that in mind, but ammo is horribly scarce right now. What's the average price for a 357 bullet? Before the crisis, that is. I know 9mm used to be about 15 cents a round for fmj. I'm seeing all 357 at bare minimum 1.00 to 1.50 a bullet.
Reply With Quote
  #39  
Old 11-14-2020, 08:22 PM
Texas Star Texas Star is offline
US Veteran
Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Mar 2005
Location: Texas
Posts: 20,249
Likes: 24,104
Liked 15,750 Times in 7,262 Posts
Default

Quote:
Originally Posted by Nightowl View Post
I certainly agree on the Safariland model 29, but also consider the model 25. The 29 is a thumb break and the model 25 is the hammer strap version. Find on that is lined with elk suade. If you have a 5 inch barrel, it will be difficult to find either one. The 6, 6 1/2 inch version is the most common, and maybe four inch.

El Paso's Model 2 (?) is almost a clone of Safariland's old M-29, and at least as well made. I've owned about five, some of each, Holds a six-inch .357 high and comfortably. I've used them for J, K, and N frames, all LINED and basketweave stamped. Work and leather is usually better than on Bianchi.

Hydra-Shok or conventional JHP or JSP. I don't trust recent Remington ANYTHING, ammo included. Use 158 grain unless you know something better for that need. Avoid hot 125 and lighter bullets, esp. in K-frame .357's. Very erosive to bbl. throats.

You must wear proper gun belt, not a common pants belt. Difference in comfort and support is very substantial.
Reply With Quote
The Following User Likes This Post:
  #40  
Old 11-14-2020, 08:28 PM
Texas Star Texas Star is offline
US Veteran
Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Mar 2005
Location: Texas
Posts: 20,249
Likes: 24,104
Liked 15,750 Times in 7,262 Posts
Default

Quote:
Originally Posted by Adupuy View Post
I'll keep that in mind, but ammo is horribly scarce right now. What's the average price for a 357 bullet? Before the crisis, that is. I know 9mm used to be about 15 cents a round for fmj. I'm seeing all 357 at bare minimum 1.00 to 1.50 a bullet.
Bullet or cartridge?
Reply With Quote
  #41  
Old 11-14-2020, 09:02 PM
Adupuy Adupuy is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Nov 2018
Posts: 60
Likes: 20
Liked 47 Times in 15 Posts
Default

Quote:
Originally Posted by Texas Star View Post
El Paso's Model 2 (?) is almost a clone of Safariland's old M-29, and at least as well made. I've owned about five, some of each, Holds a six-inch .357 high and comfortably. I've used them for J, K, and N frames, all LINED and basketweave stamped. Work and leather is usually better than on Bianchi.

Hydra-Shok or conventional JHP or JSP. I don't trust recent Remington ANYTHING, ammo included. Use 158 grain unless you know something better for that need. Avoid hot 125 and lighter bullets, esp. in K-frame .357's. Very erosive to bbl. throats.

You must wear proper gun belt, not a common pants belt. Difference in comfort and support is very substantial.
I have several gun belts, all very good. Ditto on Remington.
Reply With Quote
  #42  
Old 11-14-2020, 09:02 PM
Adupuy Adupuy is offline
Member
Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2 Safe ammo for a 27-2  
Join Date: Nov 2018
Posts: 60
Likes: 20
Liked 47 Times in 15 Posts
Default

Quote:
Originally Posted by Texas Star View Post
Bullet or cartridge?
CARTRIDGE . I don't re load
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
.500 magnum safe with boutique ammo safe? Heavy vs light bullet results? kip S&W Revolvers: 1980 to the Present 8 05-28-2018 04:34 PM
Is it safe to use steel ammo case (wolf ammo) Travis15R Ammo 28 02-02-2013 11:49 PM
Is this ammo safe? Fox609 S&W Revolvers: 1980 to the Present 3 09-14-2012 05:29 PM
Safe .32-20 Ammo BigRich315 S&W Hand Ejectors: 1896 to 1961 7 07-04-2011 04:28 PM
What .38 S&W ammo is safe? SineMetu82 S&W Antiques 7 03-12-2009 07:47 AM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 06:12 PM.


Search Engine Optimisation provided by DragonByte SEO v2.0.42 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)