Smith & Wesson Forum

Go Back   Smith & Wesson Forum > >

Notices

S&W Revolvers: 1961 to 1980 3-Screw PINNED Barrel SWING-OUT Cylinder Hand Ejectors


Reply
 
Thread Tools Display Modes
  #1  
Old 04-13-2009, 03:02 PM
tomhenry tomhenry is offline
Member
 
Join Date: Sep 2004
Posts: 324
Likes: 0
Liked 10 Times in 6 Posts
Default

I've talked to gunsmiths who said that they have had to repair S&W revolvers with hammer mounted firing pins where the owner was dry firing them.

Is this true? Would it be detrimental to dry fire such a Smith?

Thanx so much.
Reply With Quote
  #2  
Old 04-13-2009, 03:02 PM
tomhenry tomhenry is offline
Member
 
Join Date: Sep 2004
Posts: 324
Likes: 0
Liked 10 Times in 6 Posts
Default

I've talked to gunsmiths who said that they have had to repair S&W revolvers with hammer mounted firing pins where the owner was dry firing them.

Is this true? Would it be detrimental to dry fire such a Smith?

Thanx so much.
Reply With Quote
  #3  
Old 04-13-2009, 03:09 PM
Double-O-Dave Double-O-Dave is online now
US Veteran
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Dec 2007
Location: Central Texas
Posts: 4,102
Likes: 319
Liked 3,763 Times in 1,444 Posts
Default

As far as revolvers go, the S&W factory indicates that all revolvers, with the exception of rimfires (.22cal.) can be dry-fired without ill effect. My understanding is that you can dry fire a rimfire revolver on occasion, but that it should be the exception, rather than the rule.

Regards,

Dave
Reply With Quote
The Following 2 Users Like Post:
  #4  
Old 04-13-2009, 03:11 PM
john traveler john traveler is offline
Member
 
Join Date: Nov 2007
Location: west coast
Posts: 1,486
Likes: 0
Liked 45 Times in 32 Posts
Default

Truly excessive dry-firing in the tens of thousands will damage the hammer nose and/or the recoil plate where the firing pin comes out. Occasional snapping will not hurt it. I make it a practice to ease the hammer down using my offhand thumb when dry-firing.
Reply With Quote
  #5  
Old 04-13-2009, 03:13 PM
diamonback68's Avatar
diamonback68 diamonback68 is offline
US Veteran
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Jun 2003
Location: Due south of Orlando
Posts: 7,202
Likes: 597
Liked 3,430 Times in 1,403 Posts
Default

I have dry fired some of my guns a thousand times or more to smooth them out. I'm sure others here have dry fired there's even more.
__________________
Dick
Reply With Quote
The Following 3 Users Like Post:
  #6  
Old 04-13-2009, 03:37 PM
gunnut44 gunnut44 is offline
Member
Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Dec 2007
Location: South West Suburbs IL
Posts: 1,348
Likes: 82
Liked 106 Times in 48 Posts
Default

I would just go get some snap caps if it were me.
Reply With Quote
  #7  
Old 04-13-2009, 03:39 PM
idahostreams idahostreams is offline
Member
 
Join Date: Jan 2009
Location: idaho
Posts: 86
Likes: 0
Liked 7 Times in 2 Posts
Default

When I was shooting PPC for many years I dry fired thousands of times with my hammer mounted PPC gun with no problems. I still dry fire a lot to stay proficient.

Julian
Reply With Quote
The Following 6 Users Like Post:
  #8  
Old 04-13-2009, 03:42 PM
bountyhunter bountyhunter is offline
Member
 
Join Date: Jan 2002
Posts: 1,881
Likes: 1
Liked 452 Times in 223 Posts
Default

Quote:
Originally posted by diamonback68:
I have dry fired some of my guns a thousand times or more to smooth them out. I'm sure others here have dry fired there's even more.
+1

When SW switched to the frame mounted pins, I called SW factory and asked one of their gunsmiths if dry firing was OK. He said you would have to do it millions of times to hurt them. I was concerned because the Cylinder + Slide firing pins are known to break, and warn against dry firing. I have not heard of SW pins breaking.
Reply With Quote
The Following User Likes This Post:
  #9  
Old 04-13-2009, 07:28 PM
stevieboy stevieboy is offline
Member
 
Join Date: Apr 2008
Location: Tucson, Arizona
Posts: 1,450
Likes: 0
Liked 35 Times in 22 Posts
Default

If it's a problem I haven't encountered it and I do a lot of dry firing with both frame and hammer mounted firing pins. I use snap caps in my .22s, nothing in my centerfire guns.
Reply With Quote
The Following User Likes This Post:
  #10  
Old 04-13-2009, 08:00 PM
29aholic's Avatar
29aholic 29aholic is offline
Member
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Oct 2008
Location: Bolivar, MO
Posts: 6,299
Likes: 3,346
Liked 2,912 Times in 1,023 Posts
Default

I have dry fired the **** out of a few of mine with no problems, but snap caps are cheap insurance if you are worried
__________________
C M Brier CPA, CIA, CFE
Reply With Quote
The Following 6 Users Like Post:
  #11  
Old 04-15-2009, 07:56 PM
shawn mccarver shawn mccarver is offline
SWCA Member
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Aug 2005
Posts: 7,529
Likes: 3,146
Liked 5,857 Times in 2,358 Posts
Default

Quote:
Originally posted by tomhenry:
I've talked to gunsmiths who said that they have had to repair S&W revolvers with hammer mounted firing pins where the owner was dry firing them.

Is this true? Would it be detrimental to dry fire such a Smith?

Thanx so much.
Dry firing will not harm the revolver. It is a great way to smooth the action and get used to the trigger. The S&W instruction sheet used to recommend it. It read something to the effect of "practice dry shooting with empty revolver," or words to that effect. The factory web site still recommends it, except for rimfires.
Reply With Quote
The Following 2 Users Like Post:
  #12  
Old 04-15-2009, 08:36 PM
Gun 4 Fun Gun 4 Fun is offline
SWCA Member
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Nov 2008
Location: Michigan
Posts: 6,030
Likes: 1,061
Liked 742 Times in 357 Posts
Default

The factory even used to supply a dry fire practice target with their guns.

Here is what their current website says about it-

Can I dry fire my S&W handgun?
Q: Can I dry fire my Smith & Wesson?

A: Yes, except for the .22 caliber pistols which includes models 22A, 22S, 422, 2206, 2214, 2213 and 41.

.22 caliber revolvers such as models 17, 43, 63, 317 and 617 also should not be dry fired.

Q: Why can't I dry fire my .22 pistol or revolver?

A: Dry firing a S&W .22 pistol or revolver will cause damage to the firing pin.
Reply With Quote
The Following 2 Users Like Post:
  #13  
Old 04-15-2009, 08:55 PM
toroflow1 toroflow1 is offline
Member
Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Sep 2005
Location: West Coast of Arizona
Posts: 1,350
Likes: 97
Liked 372 Times in 95 Posts
Default

Quote:
Q: Why can't I dry fire my .22 pistol or revolver?

A: Dry firing a S&W .22 pistol or revolver will cause damage to the firing pin.
Well, if dry firing a model 17 will harm it, and the new versions of S&W revolvers have frame mounted firing pins (like the model 17); couldn't one extrapolate that dry firing frame mounted firing pins is not good for the gun?
__________________
ken
SWCA #1959
Reply With Quote
  #14  
Old 04-15-2009, 09:04 PM
MKT's Avatar
MKT MKT is offline
SWCA Member
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Sep 2005
Location: Temecula, CA
Posts: 1,245
Likes: 11
Liked 83 Times in 54 Posts
Default

Quote:
Originally posted by toroflow1:
Quote:
Q: Why can't I dry fire my .22 pistol or revolver?

A: Dry firing a S&W .22 pistol or revolver will cause damage to the firing pin.
Well, if dry firing a model 17 will harm it, and the new versions of S&W revolvers have frame mounted firing pins (like the model 17); couldn't one extrapolate that dry firing frame mounted firing pins is not good for the gun?
Toroflow,

I believe the difference here is the fact the Model 17 is a rimfire vs. a centerfire. The rimfire, with a chamber which is still recessed, there is a slim chance of the firing pin striking the chamber rim, that can't happen with a centerfire.
__________________
Non illegitimae carborundum
Reply With Quote
The Following 6 Users Like Post:
  #15  
Old 04-16-2009, 09:02 PM
shawn mccarver shawn mccarver is offline
SWCA Member
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Aug 2005
Posts: 7,529
Likes: 3,146
Liked 5,857 Times in 2,358 Posts
Default

Quote:
Originally posted by MKT:


Toroflow,

I believe the difference here is the fact the Model 17 is a rimfire vs. a centerfire. The rimfire, with a chamber which is still recessed, there is a slim chance of the firing pin striking the chamber rim, that can't happen with a centerfire.
Correct. It is not the frame mounting of the FP that makes the difference. It is the possibility of the FP striking the rim of the charge hole on the cylinder. That obviously cannot happen with the centerfire. It is not supposed to happen with the rimfire either because of the stop built into the FP, but I guess the tolerances can be such that it could occasionally happen, so S&W does not recommend it with the current guns.
Reply With Quote
The Following User Likes This Post:
  #16  
Old 04-17-2009, 01:59 AM
jrplourde's Avatar
jrplourde jrplourde is offline
Member
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Dec 2007
Location: Greenfield, NH
Posts: 172
Likes: 0
Liked 0 Times in 0 Posts
Default

Quote:
Originally posted by stevieboy:
If it's a problem I haven't encountered it and I do a lot of dry firing with both frame and hammer mounted firing pins. I use snap caps in my .22s, nothing in my centerfire guns.
Can someone point me to a source of 22 snap caps?

Bob
Reply With Quote
  #17  
Old 04-17-2009, 09:14 AM
Gun 4 Fun Gun 4 Fun is offline
SWCA Member
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Nov 2008
Location: Michigan
Posts: 6,030
Likes: 1,061
Liked 742 Times in 357 Posts
Default

Quote:
Can someone point me to a source of 22 snap caps?
I believe that Brownells, and Midway both sell them. Check their websites.
Reply With Quote
  #18  
Old 04-17-2009, 11:41 AM
stevieboy stevieboy is offline
Member
 
Join Date: Apr 2008
Location: Tucson, Arizona
Posts: 1,450
Likes: 0
Liked 35 Times in 22 Posts
Default

Pachmayr makes .22 rimfire snap caps. I bought mine online, either from Brownells or directly from Pachmayr.
Reply With Quote
  #19  
Old 04-17-2009, 02:00 PM
jrplourde's Avatar
jrplourde jrplourde is offline
Member
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Dec 2007
Location: Greenfield, NH
Posts: 172
Likes: 0
Liked 0 Times in 0 Posts
Default

Quote:
Originally posted by stevieboy:
Pachmayr makes .22 rimfire snap caps. I bought mine online, either from Brownells or directly from Pachmayr.
Thanks and thanks to Tim. Until this thread I didn't know such a thing existed. I need to practice double action with my M17 and this is it. Great!

Thanks Bob
Reply With Quote
  #20  
Old 01-03-2013, 05:03 AM
Delos Delos is offline
Banned
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Dec 2012
Location: North Dakota
Posts: 814
Likes: 565
Liked 191 Times in 139 Posts
Default Dry fire on rotated .22 empties

Back in the 1950ís I bought a very old .22 revolver that was an unusual name brand to me. It seemed okay until I looked closely at the back of the cylinder and saw the deep (peen) marks from the firing pin striking each cylinder hole with no shell in place. The cartridges were a problem to load and extract until I removed the bur in the chamber. The dips were narrow but deep enough I was surprised it fired okay. The fired shells were not only indented on the outside but bent downward on the lower-side to form a wrinkle when looking sideways.

I read that some semi auto .22 pistols and rifles have safety pins that stop the firing pin before it hitís the barrel when empty. I dislike having to leave a 22 semi auto cocked in long storage so consider it nice when okay to snap them off. I have read that sometimes a safety pin gets broken or someone cleaning gun forgets to put one back in.

Sometimes I have put a small piece of writing tablet paper on the front of the chamber to see if the firing pin smashes through the paper with one or two hammed drops.

(Lawyer warning - never do this)
Finally I decided to use a fired shell rotated slightly past the previous indentation. That worked very well for releasing hammer spring tension for storing a hammerless semi auto 22. (A purist would never leave an empty shell in a chamber but I am not a purist) So I also began using fired shells to dry fire my 22 revolver. Each time I clicked on all six chambers I opened it up and rotated each shell slightly more than the width of previous indentation. I did not have the type cylinder that was cut inward to surround the head of the shell, but I doubt it would make a difference.

In this day and age of lawsuits no manufacture would ever recommend dry firing on empty rim-fires so I guess I also will not recommend it either. Also never drink alcohol or talk on telephone when dry-firing unless your kids are grown, you are over 50 years old, and can ignore women really well.
Reply With Quote
  #21  
Old 01-04-2013, 12:02 PM
fredg19's Avatar
fredg19 fredg19 is offline
Member
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Apr 2012
Location: Kansas
Posts: 203
Likes: 80
Liked 96 Times in 43 Posts
Default

I have broken 2 hammer noses (hammer mounted firing pin) on my Model 19 dry firing. Once with snap caps and once without snap caps. It should be noted this was while doing crazy fast border line abusive dry firing (yeah I know, don't say it). I rarely dry fire now except very few slow firers.
Reply With Quote
  #22  
Old 01-04-2013, 11:38 PM
Buford57 Buford57 is offline
Member
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Feb 2006
Posts: 2,021
Likes: 100
Liked 2,136 Times in 759 Posts
Default

The benefit I see in snap caps is not so much protection of the firing pin as more closely approximating the weight of a loaded cylinder when practicing double action. (Yes, I know that changes as soon as the first round is fired, but simulation has its limits) The aluminum A-Zoom caps are pretty good, but even better are deprimed cases with the primer pocket filled flush with silicone gasket-goo and an appropriate weight projectile (seated over inert material the same weight as your preferred powder charge if 5 or 6 grains makes a difference to you). They are also good for reloading and ball-and-dummy drills.
__________________
Retired B RIP Bob P, Jimmy L
Reply With Quote
The Following 2 Users Like Post:
  #23  
Old 07-12-2016, 07:11 AM
steelslaver's Avatar
steelslaver steelslaver is offline
US Veteran
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Oct 2013
Location: Central Montana
Posts: 7,194
Likes: 3,659
Liked 16,309 Times in 4,742 Posts
Default

I got a model 396 a while back and I have dry fired it some but, am wondering if these alloy framed guns with frame mounted firing pins might have problems with extended dry firing. A hard steel firing pin getting smacked into an softer alloy might deform the frame area. It kind of bugs me that I get a tink noise when I do dry fire. Think I am going to avoid it with this gun and make some snap caps for it.
Reply With Quote
  #24  
Old 07-12-2016, 08:33 AM
sodacan sodacan is offline
Member
 
Join Date: Feb 2006
Posts: 2,626
Likes: 488
Liked 2,439 Times in 1,025 Posts
Default

Quote:
Originally Posted by Double-O-Dave View Post
As far as revolvers go, the S&W factory indicates that all revolvers, with the exception of rimfires (.22cal.) can be dry-fired without ill effect. My understanding is that you can dry fire a rimfire revolver on occasion, but that it should be the exception, rather than the rule.

Regards,

Dave
Never dry fire any rimfire, even with empty cases. If you hit the a point that has been contacted, you can still damage the chamber or firing pin.
Reply With Quote
  #25  
Old 07-12-2016, 09:43 AM
Targets Guy's Avatar
Targets Guy Targets Guy is offline
US Veteran
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Jul 2013
Location: Southwest Iowa
Posts: 9,645
Likes: 2,088
Liked 15,729 Times in 4,771 Posts
Default

#4-8 x 7/8 in. Yellow Ribbed Plastic Anchors (100-Piece)

get these at any good hardware store. Under 4 bucks for 100. check the size first but I think this is the one that fits nearly perfect in revolvers (.22).
Reply With Quote
The Following User Likes This Post:
  #26  
Old 07-12-2016, 09:54 AM
Monte_Northam's Avatar
Monte_Northam Monte_Northam is offline
Member
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Oct 2013
Posts: 25
Likes: 94
Liked 17 Times in 9 Posts
Default

Small yellow plastic dry wall anchors(size 3?) make perfectly good, cheap 22lr snap caps.
Reply With Quote
The Following User Likes This Post:
  #27  
Old 07-12-2016, 10:01 AM
patrickd patrickd is offline
Member
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Aug 2014
Posts: 415
Likes: 342
Liked 444 Times in 203 Posts
Default

why not save your money and just use a fired, empty .22 case?
Reply With Quote
  #28  
Old 05-29-2020, 07:36 AM
kbm6893 kbm6893 is offline
Member
Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Apr 2007
Location: Pennsylvania
Posts: 4,875
Likes: 210
Liked 3,695 Times in 1,483 Posts
Default

Quote:
Originally Posted by Targets Guy View Post
#4-8 x 7/8 in. Yellow Ribbed Plastic Anchors (100-Piece)

get these at any good hardware store. Under 4 bucks for 100. check the size first but I think this is the one that fits nearly perfect in revolvers (.22).
Yep. Work perfectly.
Reply With Quote
The Following User Likes This Post:
  #29  
Old 05-29-2020, 07:41 AM
chief38's Avatar
chief38 chief38 is online now
Member
Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Apr 2006
Posts: 13,051
Likes: 4,951
Liked 14,120 Times in 5,389 Posts
Default

S&W says Centerfire revolvers can be dry fired and Rimfire's can not. That said, I use Snap-caps or a spent cartridge for my CF's most of the time anyway. Always for the RF's!
Reply With Quote
  #30  
Old 05-29-2020, 09:54 AM
Andy Taylor Andy Taylor is offline
Member
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Sep 2006
Location: Colorado Rocky Mountains
Posts: 1,366
Likes: 614
Liked 99 Times in 46 Posts
Default

Quote:
Originally Posted by patrickd View Post
why not save your money and just use a fired, empty .22 case?
Because if you hit the same spot on the rim more than once, it's no different than not using snap caps.
__________________
Formerly know as Lucky Derby
Reply With Quote
The Following User Likes This Post:
  #31  
Old 05-29-2020, 10:10 AM
murphydog's Avatar
murphydog murphydog is offline
Moderator
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Jun 2007
Posts: 21,226
Likes: 81
Liked 11,314 Times in 6,154 Posts
Default

Third reboot of an 11 year old thread, guys. The OP seems to stop by every July or so, look for him in about 6 weeks.
__________________
Alan
SWCA 2023, SWHF 220
Reply With Quote
The Following 3 Users Like Post:
  #32  
Old 05-29-2020, 10:25 AM
bmcgilvray's Avatar
bmcgilvray bmcgilvray is online now
SWCA Member
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Jan 2006
Location: Texas
Posts: 3,045
Likes: 7,449
Liked 4,838 Times in 975 Posts
Default

Man, I hope it's ok for I've been doing it withe the same revolvers for up to 45 years.
Reply With Quote
The Following 2 Users Like Post:
  #33  
Old 06-01-2020, 05:58 PM
Birdgun Birdgun is offline
Member
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Oct 2016
Location: Marana, AZ
Posts: 611
Likes: 2,058
Liked 3,015 Times in 487 Posts
Default

I had a gunsmith tell me that sometimes the hole on the recoil shield will get a burr from the firing pin peening the hole. He said it could cause the burr to bury into the primer and cause trouble revolving the cylinder. He said a quick filing with a emery board would fix it. He told me, "Dry fire if you want to."
Reply With Quote
  #34  
Old 06-01-2020, 07:14 PM
Injunbro Injunbro is online now
Member
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Jul 2010
Location: Arizona
Posts: 255
Likes: 1,629
Liked 458 Times in 150 Posts
Default

Dry firing: A good way to smooth out new actions & practice if done right. In the 30+ years I owned a gunsmithing business I saw 1 broken hammer mounted firing pin, it was my gun & bought new. I saw 2-3 boogered firing pin bushings. I repaired countless rimfires w/ peened chambers & a few flattened firing pins. Why would anyone buy an expensive gun but skip snap caps that cost less than $10? They may need to defend themselves & their loved ones w/ these expensive tools they can protect cheaply... Think about it.
Reply With Quote
  #35  
Old 06-01-2020, 07:29 PM
Autonomous Autonomous is offline
Member
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Feb 2017
Posts: 254
Likes: 164
Liked 231 Times in 98 Posts
Default

Some of you already know yellow drywall anchors make pretty good .22 snap caps.


Last edited by Autonomous; 06-01-2020 at 07:31 PM.
Reply With Quote
The Following 7 Users Like Post:
  #36  
Old 06-01-2020, 08:36 PM
Bullzaye Bullzaye is offline
US Veteran
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Feb 2010
Location: Phoenix, AZ
Posts: 737
Likes: 70
Liked 479 Times in 203 Posts
Default

Quote:
Originally Posted by Autonomous View Post
Some of you already know yellow drywall anchors make pretty good .22 snap caps.

These are exactly what I've been using for the past 10 or 12 years. I also leave one of them in the chamber of any of my rimfire guns, the ones where I can't just lower the hammer...it allows me to dry fire them, so the gun isn't sitting in a cocked condition for months, or years, on end.
Reply With Quote
  #37  
Old 06-01-2020, 10:31 PM
scooter123 scooter123 is offline
Member
 
Join Date: Jan 2009
Location: Metro Detroit, Michigan
Posts: 6,592
Likes: 166
Liked 3,722 Times in 1,872 Posts
Default

Quote:
Originally Posted by Autonomous View Post
Some of you already know yellow drywall anchors make pretty good .22 snap caps.
So do fired 22 rimfire cases and the only cost for those is you have to remember to keep them.
Reply With Quote
  #38  
Old 06-01-2020, 11:59 PM
Bullzaye Bullzaye is offline
US Veteran
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Feb 2010
Location: Phoenix, AZ
Posts: 737
Likes: 70
Liked 479 Times in 203 Posts
Default

Quote:
Originally Posted by scooter123 View Post
So do fired 22 rimfire cases and the only cost for those is you have to remember to keep them.
Personally...I find that the roughly $4 or $5 that it cost me for 100 of the yellow anchor "snap caps" is money well spent. As opposed to spent brass, the anchors can be snapped hundreds of times, because the plastic does not easily deform, and can survive hundreds of firing pin strikes. Also, they will feed from magazines (most of the time) so I can introduce a "misfire" into the equation for a student, and can observe any flinch or anticipation, which is not possible with spent brass. Finally...it's convenient to peek into the chamber, and see the bright yellow anchor as an obvious indication of status...whereas peeking into the chamber and seeing a brass case, well...you must assume it's a live round, and eject it to verify the status.

Considering that these 100 anchors were purchased 10 or 12 years ago...and that I've given a few out to friends, almost all of my .22s live with them in their chambers, and I still have 40 or so of them in the little box...I'd say it's $4 or $5 well spent. I guess if that's too much of an expense, then the spent brass cases are the next best option.
Reply With Quote
  #39  
Old 06-02-2020, 09:54 AM
Dale53 Dale53 is online now
Member
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Sep 2007
Location: Southwestern Ohio
Posts: 2,257
Likes: 131
Liked 972 Times in 392 Posts
Default

Over the years I have broken three hammer mounted firing pins. In addition, I had a Ruger Single Six break a frame mounted firing pin. The broken pin worked well without me noticing it until it had peaned each chamber. I removed the burr, and it still works well after more than fifty years after (after I replaced the broken pin which is NOT easy to do.

So, I now NEVER dry fire without snap caps. The tip to use wall anchors as snap caps for rim fires is an excellent one. I couldn't believe how well they fit and worked until I tried it several months ago.

FWIW
Dale53
Reply With Quote
  #40  
Old 06-02-2020, 11:08 AM
ACORN's Avatar
ACORN ACORN is offline
Member
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Jan 2004
Location: North Huntingdon Pa.
Posts: 2,308
Likes: 3,159
Liked 4,184 Times in 1,409 Posts
Default

Iím old school and donít like to dry fire without snap caps.
__________________
Real men shoot revolvers

Last edited by ACORN; 06-02-2020 at 01:12 PM.
Reply With Quote
  #41  
Old 06-02-2020, 11:32 AM
The Norseman's Avatar
The Norseman The Norseman is offline
Member
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Jan 2015
Location: Black Hills South Dakota
Posts: 949
Likes: 2,082
Liked 1,507 Times in 560 Posts
Exclamation Anchors away

My opinion is; I don't care what anybody says about
Dry Firing a Gun, you won't catch me doing it.

I do like the Plastic Anchor idea though!

The Best to you all out there and your Endeavors. Peace.
Attached Images
Is dry firing a S&W with a hammer mounted firing pin ok?-sw-pc-629-lt-hunter-44mag-jpg 
__________________
Shoot often, Share your Sport
Reply With Quote
The Following User Likes This Post:
  #42  
Old 06-02-2020, 11:35 AM
moosedog moosedog is online now
SWCA Member
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Feb 2003
Location: Michigan
Posts: 6,239
Likes: 6,251
Liked 8,682 Times in 2,225 Posts
Default

Been doing it on hundreds of guns since 1973 with no broken or damaged anything.
Reply With Quote
The Following 2 Users Like Post:
  #43  
Old 06-05-2020, 03:06 AM
.357magger .357magger is online now
Member
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Jun 2006
Location: New Orleans, LA
Posts: 557
Likes: 49
Liked 123 Times in 46 Posts
Default

Quote:
Originally Posted by moosedog View Post
Been doing it on hundreds of guns since 1973 with no broken or damaged anything.

Ditto for me, since about 1978. Mine still all go bang.
Reply With Quote
  #44  
Old 06-17-2020, 10:01 AM
Andy Taylor Andy Taylor is offline
Member
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Sep 2006
Location: Colorado Rocky Mountains
Posts: 1,366
Likes: 614
Liked 99 Times in 46 Posts
Default

Quote:
Originally Posted by Birdgun View Post
I had a gunsmith tell me that sometimes the hole on the recoil shield will get a burr from the firing pin peening the hole. He said it could cause the burr to bury into the primer and cause trouble revolving the cylinder. He said a quick filing with a emery board would fix it. He told me, "Dry fire if you want to."
Never heard or seen that no a S&W Hand Ejector. Seen it first hand on a Colt SAA.
__________________
Formerly know as Lucky Derby
Reply With Quote
  #45  
Old 06-17-2020, 06:29 PM
renquestor` renquestor` is online now
Member
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Mar 2017
Posts: 1
Likes: 1
Liked 0 Times in 0 Posts
Default

One exception Iíve found is if you have the first generation stainless steel hammer nose, like on. Model 64 no dash. The steel used was brittle and could break. I had that happen to me on my model 64 and I was using snap caps.


Sent from my iPhone using Tapatalk
Reply With Quote
  #46  
Old 06-17-2020, 08:29 PM
Hang-Fire Hank Hang-Fire Hank is offline
Member
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: Mar 2009
Location: Central AZ
Posts: 398
Likes: 8
Liked 303 Times in 141 Posts
Default

If you guys are hand-loaders, just make some dummy rounds w/out powder nor primers. I fill the primer pockets w/automotive gasket sealer for the hammer to hit. Also easy to spot compared to a live primer. Tried painting the base, but it rubbed off against the recoil shield. I prefer dry-firing with dummy rounds, 'cause the bullet weights make the trigger pull the same as a fully loaded revolver.
Hank M.
Reply With Quote
The Following User Likes This Post:
  #47  
Old 06-18-2020, 12:12 AM
NY-1's Avatar
NY-1 NY-1 is offline
Member
Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok? Is dry firing a S&W with a hammer mounted firing pin ok?  
Join Date: May 2020
Location: NYC
Posts: 28
Likes: 218
Liked 52 Times in 13 Posts
Default

I broke a hammer-mounted firing pin while dry firing my used Model 10 (1969/1970 manufacture AFAIK) a few months back. The gun was well-worn when I purchased it. Fired five chambers, and on the sixth I heard a sharp *tink* noise. Looked at the pin afterward and it sheared right off.
Reply With Quote
Reply

Tags
22a, 317, 617, brownells, m17, model 17, pachmayr, ppc, recessed, rimfire

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Hammer Mounted Firing Pin? Harry58 S&W Revolvers: 1961 to 1980 26 12-16-2015 04:07 AM
hammer mounted firing pin question Smoke Wagon S&W Hand Ejectors: 1896 to 1961 2 04-09-2015 09:14 PM
686 ss hammer mounted firing pin eagleeyeone S&W Revolvers: 1980 to the Present 2 06-28-2011 05:47 AM
hammer mounted firing pin dbracin S&W-Smithing 2 12-28-2010 11:26 PM
Hammer firing pin vs. frame mounted firing pin mountaingun629 S&W Revolvers: 1980 to the Present 16 03-13-2009 01:14 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 11:21 PM.


Search Engine Optimisation provided by DragonByte SEO v2.0.42 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)