Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Revolvers > S&W Revolvers: 1980 to the Present
o

Notices

S&W Revolvers: 1980 to the Present All NON-PINNED Barrels, the L-Frames, and the New Era Revolvers


Reply
 
Thread Tools Display Modes
  #1  
Old 10-11-2009, 03:25 PM
CAJUNLAWYER's Avatar
CAJUNLAWYER CAJUNLAWYER is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Feb 2005
Location: On da Bayou Teche
Posts: 18,407
Likes: 18,440
Liked 58,599 Times in 9,622 Posts
Default 9mm vs .38 in a 2" J frame

So which is more powerful in a two inch J frame or is it a wash??? Does the 9 somehow split the diffeence between the 38 & 357???
__________________
Forum consigliere
Reply With Quote
  #2  
Old 10-11-2009, 03:35 PM
manny25 manny25 is offline
Banned
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: May 2009
Location: louisiana
Posts: 392
Likes: 0
Liked 8 Times in 4 Posts
Default

for what i read is the 9mm is more powerful form what they say its between 38 and 357 i have a 640 38special and a 940-1 the 9mm kicks more
Reply With Quote
  #3  
Old 10-11-2009, 03:47 PM
Bacon's Avatar
Bacon Bacon is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Feb 2005
Location: Upstate, SC
Posts: 171
Likes: 177
Liked 168 Times in 68 Posts
Default

I believe the drawback for 9mm is the moonclip. Some folks love 'me, some don't. Otherwise, there is no competition between the two rounds. 9mm wins.
Reply With Quote
  #4  
Old 10-11-2009, 03:54 PM
sw702 sw702 is offline
SWCA Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Jan 2008
Posts: 326
Likes: 66
Liked 196 Times in 70 Posts
Smile 2inch 940 ,my old notes

1998 someone(?) had a chronograph set up at the range, 124+p gold dots 5 shot avg 1,125fps(in my notes,cases sticking after three reloads).W-W 115 silvertips, 1,130 (cases fall out 3rd reload).95gr soft point Radway Green 1,186fps. Federal 124 H.S. 1,020fps and some old(late 70s)W-W 100gr PowerPoint 1,190.(notes say best group at 15yrds) *also on the gold dots some would not seat in cyl, bullet seated to far out.
Reply With Quote
  #5  
Old 10-11-2009, 03:55 PM
manny25 manny25 is offline
Banned
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: May 2009
Location: louisiana
Posts: 392
Likes: 0
Liked 8 Times in 4 Posts
Default

i like moon clips myself i have 3 625s a 610 and a 940-1 and some ruger 9mm revolvers
Reply With Quote
The Following 2 Users Like Post:
  #6  
Old 10-11-2009, 04:21 PM
WC145's Avatar
WC145 WC145 is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Oct 2008
Location: Maine
Posts: 3,289
Likes: 3,076
Liked 3,828 Times in 851 Posts
Default

I recently posted chronograph comparisons of .38spl, .38spl +P, 9mm, 9mm +P, 9mm +P+, .38 Super, and 9x23 Winchester using my 9x23 360J, a 637, a Taurus 905, a 9mm Beretta Cougar, a 9mm HK USP, and a .38 Super 1911.
The 9mm slays the .38spl out of a properly chambered snubby (Taurus 905) and still trounces it pretty good out of my rechambered gun, in spite of blow by.

IMO, moonclips are the only way to fly. Way faster than speed loaders and easier to carry.

Here are my comparison results -

__________________
Don't kiss smiling dogs!
Reply With Quote
The Following 3 Users Like Post:
  #7  
Old 10-11-2009, 09:54 PM
David Sinko David Sinko is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Feb 2007
Posts: 2,089
Likes: 0
Liked 375 Times in 217 Posts
Default

I own both a Model 60 and 940, each with a 2" barrel. I have done a lot of chrono work lately with both and I believe that the .38 Special has a slight edge due to its ability to handle heavier bullets with sharper shoulders. With heavy charges of SR 4756 powder and 158 gr. cast bullets, you can get an honest 1100 FPS from a 2" barrel. With the 9mm I have handloaded 122 gr. cast bullets to 1220 FPS, but they start to keyhole somewhere around 20 yards. Jacketed bullets produce slightly lower velocities from both revolvers. My favorite load for my 940 shoots a 147 gr. Speer GDHP at 1070 FPS and I never get sticky extraction. I also have a load that will launch the obsolete 124 gr. Pin Grabber bullet at 1160 FPS but despite the wide, jagged formidable looking "hollow point" I have no idea how well this bullet will hold up when it hits meat.

Dave Sinko
Reply With Quote
The Following 2 Users Like Post:
  #8  
Old 10-11-2009, 10:05 PM
n4zov's Avatar
n4zov n4zov is offline
US Veteran
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Oct 2005
Location: S.E. USA
Posts: 1,942
Likes: 0
Liked 63 Times in 37 Posts
Default

WC145 thanks for taking the time to share your results. Very interesting!
Reply With Quote
  #9  
Old 10-11-2009, 11:11 PM
Jager01 Jager01 is offline
Member
 
Join Date: Sep 2008
Posts: 125
Likes: 1
Liked 1 Time in 1 Post
Default Wc145

WC145,

How did you get the gun chambered in 9x23?
Reply With Quote
  #10  
Old 10-11-2009, 11:53 PM
colt_saa's Avatar
colt_saa colt_saa is online now
SWCA Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Feb 2005
Location: Cocoa Beach, Florida
Posts: 10,559
Likes: 3,037
Liked 22,454 Times in 5,824 Posts
Wink

Quote:
Originally Posted by Jager01 View Post
WC145,

How did you get the gun chambered in 9x23?
Just have your cylinder rechambered.

I have one of my 940s opened up for 38 Super. I also intend to have my 360 opened up to 9x23, just have not gotten around to it.
Reply With Quote
  #11  
Old 10-12-2009, 01:20 AM
nvgunner nvgunner is offline
Member
 
Join Date: Jan 2006
Posts: 30
Likes: 0
Liked 1 Time in 1 Post
Default

I interpret your question about "powerful" to mean "effective," presumably in defense shooting. Lots of interesting technical stuff here. My response in two words--"shot placement." Good luck.
Reply With Quote
The Following User Likes This Post:
  #12  
Old 10-12-2009, 07:48 AM
WC145's Avatar
WC145 WC145 is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Oct 2008
Location: Maine
Posts: 3,289
Likes: 3,076
Liked 3,828 Times in 851 Posts
Default

Quote:
Quote:
Originally Posted by Jager01
WC145,

How did you get the gun chambered in 9x23?
Just have your cylinder rechambered.

I have one of my 940s opened up for 38 Super. I also intend to have my 360 opened up to 9x23, just have not gotten around to it.
Like colt saa said, you just have the cyinder reamed/rechambered. There are a few companies doing it, Pinnacle High Performance did the work on my gun. The thing to remember about the conversion is that it is a compromise and, as you can see by the chronograph results, the versatility of being able to use multiple calibers in the same weapon comes at a price. Because of the dimensional differences between the cartridges and the size of the chambers they don't necessarily reach their full potential due to loss of pressure. However, my goal was to have a small, light revolver for a BUG that would chamber the same calibers as my duty/carry guns, which I achieved. The bonus of the compromise is that all of the calibers I can shoot out of the gun now outperform the .38spl that it was originally chambered for without the recoil and muzzle blast of the .357mag. And, before anyone brings it up, I've found no appreciable difference in accuracy between the 9mm's and .38's.
__________________
Don't kiss smiling dogs!

Last edited by WC145; 10-12-2009 at 07:55 AM.
Reply With Quote
The Following User Likes This Post:
  #13  
Old 10-12-2009, 07:55 AM
7shooter 7shooter is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Nov 2008
Location: In the Cloud
Posts: 1,736
Likes: 2,252
Liked 1,872 Times in 582 Posts
Default

+1 on shot placement. I bought a new 940 a few years ago that would not eject the moon clips without a hammer and a punch. S&W initially told me I was using the wrong ammo but it happened with every brand. After sending it in a couple of times they gave up and traded me a new .357 640. Great gun.
Reply With Quote
  #14  
Old 10-12-2009, 09:33 AM
safearm's Avatar
safearm safearm is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Feb 2009
Location: Mississippi
Posts: 1,753
Likes: 232
Liked 687 Times in 252 Posts
Default

I have both a 940 and a 637 converted to 9mm moonclips. The 637 was done by TK Custom. I made the switch for convienience; I carry a 3913 as a primary ccw and either the 940 or 637 as a back-up. I carry the same ammo in both, currently the Winchester 124 grain PDX.
IMO, there is no difference in percieved recoil between a .38 Special +P and a 9mm +P, although there is a significant pressure difference between the two rounds. I've shot enough rounds through both of the revolvers to know that they will function, POI, etc., but they are definitely "carry a lot-shoot a little."
Reply With Quote
  #15  
Old 10-12-2009, 11:47 AM
OKFC05 OKFC05 is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Aug 2007
Location: Oklahoma
Posts: 8,158
Likes: 3,605
Liked 5,199 Times in 2,172 Posts
Default

Hey CAJ, you trying to start a fistfight? (Less filling! Tastes great!)

As you can see above, most people who take their answer from calculations just take the ME, and whichever is greater, is obviously better.
Well, not so fast. The empirical evidence (you know, the messy real-wrold shooting stuff) indicates that penetration is more important than ME, and penetration is more directly proportional to momentum than to energy.
(energy being mass times V squared and momentum being mass times V).
Using heavier bullets gives an edge to the .38 using momentum as a metric. The 9mm shines with lighter bullets.

Personally, I use the 135grSB Gold Dot in .38 and the 124gr Gold Dot in 9mm, and just don't see any real difference in effectiveness shooting critters. You pays your money and makes your choices..........
Reply With Quote
  #16  
Old 10-12-2009, 12:16 PM
JNewell JNewell is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Sep 2001
Location: Land of the Bean&the Cod
Posts: 430
Likes: 36
Liked 122 Times in 66 Posts
Default

There was a three-way comparison of .38 Special, 9x19 and .357 Magnum in short-barrel revolvers a few years back in The American Rifleman. The basic conclusion was that, all things considered (velocity, blast, perceived recoil, etc.), 9x19 was the sweet spot. None of this matters if you can't deliver the shot, though, as has been said above.
Reply With Quote
  #17  
Old 10-12-2009, 02:53 PM
David Sinko David Sinko is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Feb 2007
Posts: 2,089
Likes: 0
Liked 375 Times in 217 Posts
Default

So the 9xWHATEVERmm conversion increases your ability to chamber different cartridges in the J Frame... but at what cost? The old standby 9mm when handloaded to its true potential won't work without moonclips because you had the cylinder reamed out. Is that really worth it? If it was done right, the .38 Super should work without moonclips, but is that really important? Or look at the 9x23... Does anybody really care about this cartridge anymore? Any of these is lucky to be the equal of the old .38 Special on a good day. Where are you going to find hot .38 Super or ANY 9x23 in an emergency? So you handload, that's good. Because most of these *******ized conversions are brass eaters anyway. Make sure you have lots of brass for when your case heads get warped in the oversize chambers they call home. What more versatility do you need when you have a 9x19 with modern, heavily loaded factory ammunition? And again, NONE of these is the equivalent of heavily handloaded .38 Special. The whole 9xWHATEVERmm vs. .38 Special argument doesn't have much merit when we're considering 2" barreled revolvers, at least in terms of power (which I believe was the original question). The straight wall .38 Special has more case capacity, can fire heavier bullets and be extracted with compete reliability thanks to its rim. A properly loaded 9x19 in a properly made STOCK 940 is almost its equal in power and I believe actually more versatile when moonclips are added to the equation. You can argue that a .38 Super conversion of the 940 is even more versatile, but at the top end of the handload spectrum the compromise will be very compromising indeed.

Dave Sinko
Reply With Quote
  #18  
Old 10-12-2009, 03:10 PM
Col Defender's Avatar
Col Defender Col Defender is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Dec 2008
Location: Northwest Missouri
Posts: 185
Likes: 0
Liked 1 Time in 1 Post
Default

No comparison IMO. The higher velocity of the 9mm more than offsets the (usually) heavier bullet from a .38 Special.
Reply With Quote
  #19  
Old 10-12-2009, 06:32 PM
WC145's Avatar
WC145 WC145 is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Oct 2008
Location: Maine
Posts: 3,289
Likes: 3,076
Liked 3,828 Times in 851 Posts
Default

Quote:
Originally Posted by David Sinko View Post
So the 9xWHATEVERmm conversion increases your ability to chamber different cartridges in the J Frame... but at what cost? The old standby 9mm when handloaded to its true potential won't work without moonclips because you had the cylinder reamed out. Is that really worth it? If it was done right, the .38 Super should work without moonclips, but is that really important? Or look at the 9x23... Does anybody really care about this cartridge anymore? Any of these is lucky to be the equal of the old .38 Special on a good day. Where are you going to find hot .38 Super or ANY 9x23 in an emergency? So you handload, that's good. Because most of these *******ized conversions are brass eaters anyway. Make sure you have lots of brass for when your case heads get warped in the oversize chambers they call home. What more versatility do you need when you have a 9x19 with modern, heavily loaded factory ammunition? And again, NONE of these is the equivalent of heavily handloaded .38 Special. The whole 9xWHATEVERmm vs. .38 Special argument doesn't have much merit when we're considering 2" barreled revolvers, at least in terms of power (which I believe was the original question). The straight wall .38 Special has more case capacity, can fire heavier bullets and be extracted with compete reliability thanks to its rim. A properly loaded 9x19 in a properly made STOCK 940 is almost its equal in power and I believe actually more versatile when moonclips are added to the equation. You can argue that a .38 Super conversion of the 940 is even more versatile, but at the top end of the handload spectrum the compromise will be very compromising indeed.

Dave Sinko
Chill out, Dave, take a pill.
It comes down to different strokes for different folks, if you want to shoot .38's have at it. For me, I like versatility and choice. I like a back up loaded with the same ammo as my primary, and my primary varies between 9xWHATEVERmm and .38 Super. AND I like moonclips, they're faster and easier to carry. I don't need to locate .38 Super and 9x23, I have plenty on hand, and they all surpass the old .38spl in terms of MV and ME. So, if you don't like it shoot whatever you want, but for some of us the conversions work, even with the compromises.

Oh, and the cost was $225 from Pinnacle, plus the other work I had done.
__________________
Don't kiss smiling dogs!
Reply With Quote
  #20  
Old 10-12-2009, 06:53 PM
sipowicz's Avatar
sipowicz sipowicz is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Aug 2005
Location: Gun lovin\' Hollywood Ca.
Posts: 10,238
Likes: 7,741
Liked 18,707 Times in 3,792 Posts
Default

A 9mm in a USA made snubnose revolver is un-American!
__________________
Thirty characters. Exactly...
Reply With Quote
The Following User Likes This Post:
  #21  
Old 10-12-2009, 08:19 PM
JcMack's Avatar
JcMack JcMack is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Jun 2009
Location: Deepest, darkest, Indiana
Posts: 6,187
Likes: 3,357
Liked 6,179 Times in 1,890 Posts
Default

I had a 1911 Colt in 9X23. Shooting 9X23 out of a J frame must be interesting.
Reply With Quote
  #22  
Old 10-13-2009, 10:56 AM
David Sinko David Sinko is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Feb 2007
Posts: 2,089
Likes: 0
Liked 375 Times in 217 Posts
Default

OK, I have chilled out...

The 9x23 load with 124 gr. bullet is getting only 1176 FPS, which is almost exactly what I got with the handloaded 9x19. I got to the point where increases in powder charges gave no increase in velocity or difficulty in extraction, so it appears I have reached the point of diminishing returns in the 2" barrel.

I don't think that any increases in length of the 9mm cartridge case will give any appreciable increases in velocity, at least out of the 2" barrel. They would most certainly give lower pressure, but the velocity just isn't there, at least from the velocity figures I have seen so far. It looks as though you can burn only so much powder in a 2" barrel.

By the way, does anybody make a true 2" barrel .357 Magnum?

Dave Sinko
Reply With Quote
  #23  
Old 10-13-2009, 11:13 AM
Lenshappy's Avatar
Lenshappy Lenshappy is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Mar 2007
Posts: 679
Likes: 2
Liked 30 Times in 23 Posts
Default

"By the way, does anybody make a true 2" barrel .357 Magnum?"

Not sure but I love my 2.5 DW
Reply With Quote
  #24  
Old 10-13-2009, 11:35 AM
CAJUNLAWYER's Avatar
CAJUNLAWYER CAJUNLAWYER is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Feb 2005
Location: On da Bayou Teche
Posts: 18,407
Likes: 18,440
Liked 58,599 Times in 9,622 Posts
Default

How bout Smith making a 642/442 in 9mm with no lock-and just for grins, make it with a 5 shot cylinder utilizing the 547's extraction method.
__________________
Forum consigliere
Reply With Quote
  #25  
Old 10-13-2009, 12:39 PM
jframe's Avatar
jframe jframe is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: May 2005
Location: Florence, Alabama
Posts: 2,067
Likes: 1,887
Liked 1,137 Times in 304 Posts
Default

Now that one I might try! Had a 940 once and it really made me cuss big because of those stupid clips. I know some folks like them, but they ain't my cup of tea.
Reply With Quote
  #26  
Old 10-13-2009, 03:04 PM
WC145's Avatar
WC145 WC145 is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Oct 2008
Location: Maine
Posts: 3,289
Likes: 3,076
Liked 3,828 Times in 851 Posts
Default

Quote:
Originally Posted by David Sinko View Post
OK, I have chilled out...

The 9x23 load with 124 gr. bullet is getting only 1176 FPS, which is almost exactly what I got with the handloaded 9x19. I got to the point where increases in powder charges gave no increase in velocity or difficulty in extraction, so it appears I have reached the point of diminishing returns in the 2" barrel.

I don't think that any increases in length of the 9mm cartridge case will give any appreciable increases in velocity, at least out of the 2" barrel. They would most certainly give lower pressure, but the velocity just isn't there, at least from the velocity figures I have seen so far. It looks as though you can burn only so much powder in a 2" barrel.

By the way, does anybody make a true 2" barrel .357 Magnum?

Dave Sinko
The loss of velocity due to blowby is part of the compromise. I was disappointed with some of the results but at the same time I was quite surprised and impressed at others. The real stand outs for me were the Federal 115gr +P+ at 1174fps and the WWB 115gr FMJ at 1096fps out of the Taurus 905. To me that speaks volumes about the efficiency of the 9mm in properly chambered short barreled revolvers.
__________________
Don't kiss smiling dogs!
Reply With Quote
  #27  
Old 10-13-2009, 06:45 PM
David Sinko David Sinko is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Feb 2007
Posts: 2,089
Likes: 0
Liked 375 Times in 217 Posts
Default

Anybody who is impressed by the 9x23 should stand in awe of the old .38 Special! After all, what is the 9x23 anyway? Is it not just a tapered rimless .38 Super with a thicker web so that the caseheads don't blow out in an autopistol? The thicker web reduces case capacity that much more, and the J Frame with its offset cylinder stop notches does not require thicker brass to stand the higher pressures. So, we have the .38 Special which towers above the 9x23 with far greater case capacity and the ability to handle heavier bullets. Frankly I'm amazed that so many shooters look down on the .38 Special.

And how can anybody think that moonclips are a disadvantage with the 9mm revolver? Obviously I'm a huge fan of the .38 Special cartridge, but out of a J Frame with a 2" barrel I believe the better choice is the 940 precisely because it uses moonclips. The ballistic advantage of the .38 Special is not all that great out of the short barrel but the quickness and certainty of the moonclip loading and extraction of moonclipped 9mm are the deal breaker for me.

I never owned a 547, but I'm willing to bet that any load which ties up my 940 (inferior brass or too much fast powder) will lock up a 547 just the same.

Dave Sinko
Reply With Quote
  #28  
Old 10-17-2009, 05:07 PM
AKAOV1MAN AKAOV1MAN is offline
US Veteran
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Jun 2007
Posts: 987
Likes: 28
Liked 381 Times in 99 Posts
Default

The actual difference in applied effective power may well be in the bullet construction rather than in velocity or muzzle energy, however derived. Since it long settled that a certain amount of penetration is necessary, the bullet type and construction may well determine penetration at a given velocity.
My solution is to have 2 extra 9mm cylinders fitted to 2 different M60s, one a 3 inch HB, the other a 60-4 with adjustable sights. Seems to work OK so far.

Last edited by AKAOV1MAN; 10-17-2009 at 05:09 PM.
Reply With Quote
The Following User Likes This Post:
  #29  
Old 07-25-2019, 11:55 PM
JimCunn JimCunn is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Jun 2018
Posts: 377
Likes: 133
Liked 375 Times in 162 Posts
Default

"The old standby 9mm when handloaded to its true potential won't work without moonclips because you had the cylinder reamed out. Is that really worth it?"

Well, since the moon clips are a huge improvement in speed and convenience over speed strips and speed loaders, yeah - it's worth it.
Reply With Quote
The Following User Likes This Post:
  #30  
Old 07-25-2019, 11:58 PM
JimCunn JimCunn is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Jun 2018
Posts: 377
Likes: 133
Liked 375 Times in 162 Posts
Default

"Anybody who is impressed by the 9x23 should stand in awe of the old .38 Special!"

Are they loaded to the same pressure?
Reply With Quote
  #31  
Old 07-26-2019, 07:59 AM
murphydog's Avatar
murphydog murphydog is offline
Moderator
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Jun 2007
Posts: 26,782
Likes: 936
Liked 18,874 Times in 9,241 Posts
Default

An almost ten year old thread, but the OP was online two days ago - you can ask him if his question was answered.
__________________
Alan
SWCA LM 2023, SWHF 220
Reply With Quote
The Following 3 Users Like Post:
  #32  
Old 07-26-2019, 08:48 AM
rockquarry rockquarry is online now
Member
 
Join Date: Aug 2005
Posts: 7,552
Likes: 4
Liked 8,885 Times in 4,121 Posts
Default

Another thread of questionable worth regardless of how old it is. Is the cartridge all that important? Some seem to spend much time and misguided thought obsessing over details, unimportant fine points, and other textbook-type solutions while very likely ignoring shooting skills.

A proficient shooter using a standard pressure roundnose .38 Special load (or anything else) in a snubnose gun is far more practical and daunting in a defensive situation than someone consumed with things that may not really matter all that much.
Reply With Quote
The Following User Likes This Post:
  #33  
Old 07-26-2019, 11:07 AM
JimCunn JimCunn is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Jun 2018
Posts: 377
Likes: 133
Liked 375 Times in 162 Posts
Default

Well, not all shooting is defensive in nature, and my three 637-2 J-frames are all 9x19 instead of .38, so caliber is of some interest to me (I have to swap cylinders to shoot .38).

I didn't notice the age of the thread when I responded to it. My apologies for that.

Last edited by JimCunn; 07-26-2019 at 11:09 AM.
Reply With Quote
The Following User Likes This Post:
  #34  
Old 07-27-2019, 06:48 AM
stansdds stansdds is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Apr 2007
Location: Virginia
Posts: 8,712
Likes: 19,273
Liked 11,732 Times in 5,350 Posts
Default

Reply With Quote
  #35  
Old 07-27-2019, 07:19 AM
mbliss57's Avatar
mbliss57 mbliss57 is offline
US Veteran
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Jan 2012
Location: Desert South West
Posts: 5,540
Likes: 7,356
Liked 8,688 Times in 2,312 Posts
Default

Very interesting. T
1. The OP is very active on the forum. (Caj did you get your question answered?)

2. The question was relevant today, 10 years ago and 25 years ago and 35 years ago and..

3. The controversy is just as real now as then.. Not velocity but effectivness.
__________________
John 1:17
NRA Life Benefactor
Reply With Quote
  #36  
Old 07-27-2019, 07:48 AM
SuperMan SuperMan is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Apr 2003
Location: Rochester, NH USA
Posts: 4,001
Likes: 1,620
Liked 4,900 Times in 1,701 Posts
Default

Love when the Zombie Threads pop up...especially on a topic I like...

Had a 940 for a while but would tie up if using any +P rated ammo...ran 100% with any standard velocity. Sold the gun to a friend and he just ran it with standsard pressure ammo and it has never missed a beat.


Have had three guns done by TK Custom....

S&W 66-2 3"...found a brand new extra cylinder that dropped right in and had the extra cylinder rechambered for .38 Super...and will also take 9mm. Accuracy has been excellent with all rounds but have not had the chance to do any extensive chronograph work....

S&W 60-10 3"....same with this gun as the 66-2....

S&W 649-1....just had the original cylinder reamed out for .38 Super which was a mistake. When using +P .38 Special the cases with expand sometimes making extraction difficult. A few months ago I found a proper replacement cylinder and it is at the smith being fitted now.

Somewhere I have an ON TARGET magazine from last year that has the comparison of three Ruger LCRs in .38 Special, 9mm and .357 Magnum all using SIG 124/125 grain ammo. Don't remember the exact veolocities but the .38 was around 900 and the 9mm 1140 and the .357 1170... There was only 30-40 fps difference between the two. I have two of the LCRs in 9mm and they have been excellent shooters...the clips are also very easy to load and unload with a tool...

Bob
Attached Images
File Type: jpg 004_zpsbl7j6jbl.jpg (112.6 KB, 32 views)
File Type: jpg 013_zpsu0rybzql.jpg (114.8 KB, 32 views)
File Type: jpg 014_zpslaqxajda.jpg (117.8 KB, 30 views)
File Type: jpg 001_zpslafycxoa.jpg (114.5 KB, 26 views)
Reply With Quote
The Following User Likes This Post:
  #37  
Old 07-27-2019, 09:25 AM
HOUSTON RICK HOUSTON RICK is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Dec 2003
Location: HOUSTON, TEXAS
Posts: 10,123
Likes: 7,091
Liked 14,252 Times in 5,366 Posts
Default

Quote:
Originally Posted by CAJUNLAWYER View Post
So which is more powerful in a two inch J frame or is it a wash??? Does the 9 somehow split the diffeence between the 38 & 357???
Either one can give your bad guy opponent a very, very bad day.
Reply With Quote
  #38  
Old 07-27-2019, 05:13 PM
OttoLoader OttoLoader is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Dec 2017
Location: North Carolina
Posts: 109
Likes: 94
Liked 58 Times in 39 Posts
Default

Quote:
Originally Posted by David Sinko View Post
OK, I have chilled out...

The 9x23 load with 124 gr. bullet is getting only 1176 FPS, which is almost exactly what I got with the handloaded 9x19. I got to the point where increases in powder charges gave no increase in velocity or difficulty in extraction, so it appears I have reached the point of diminishing returns in the 2" barrel.

I don't think that any increases in length of the 9mm cartridge case will give any appreciable increases in velocity, at least out of the 2" barrel. They would most certainly give lower pressure, but the velocity just isn't there, at least from the velocity figures I have seen so far. It looks as though you can burn only so much powder in a 2" barrel.

By the way, does anybody make a true 2" barrel .357 Magnum?

Dave Sinko
Hornady critical defense use low flash short barrel propellant.they advertise 1200 fts 400 ft-lb with the 125 he flex tip.

Has anyone checked this values in a 60 or other S&W 2 1/8 in barrel?
Reply With Quote
  #39  
Old 07-27-2019, 05:34 PM
Gamecock's Avatar
Gamecock Gamecock is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Jan 2010
Location: SC
Posts: 3,533
Likes: 589
Liked 3,637 Times in 1,627 Posts
Default

The bad guy won't notice the difference.
__________________
I've still got it made.
Reply With Quote
  #40  
Old 07-27-2019, 07:53 PM
JayFramer JayFramer is offline
Banned
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Jul 2013
Posts: 4,596
Likes: 6,989
Liked 9,331 Times in 2,759 Posts
Default

From what I understand, the .38 has a higher knockdown due to the heavier bullets. But, the 9mm has a bit higher thumping factor due to more velocity.
Reply With Quote
  #41  
Old 07-28-2019, 04:36 AM
stormyone stormyone is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Apr 2016
Posts: 41
Likes: 9
Liked 29 Times in 19 Posts
Default

Quote:
Originally Posted by JayFramer View Post
From what I understand, the .38 has a higher knockdown due to the heavier bullets. But, the 9mm has a bit higher thumping factor due to more velocity.
Higher knockdown or higher thumping factor... decisions, decisions.
Reply With Quote
  #42  
Old 07-28-2019, 07:02 AM
KLYDE's Avatar
KLYDE KLYDE is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Jul 2012
Location: TWILIGHT ZONE
Posts: 1,933
Likes: 13,000
Liked 4,632 Times in 1,190 Posts
Default

quote
"Somewhere I have an ON TARGET magazine from last year that has the comparison of three Ruger LCRs in .38 Special, 9mm and .357 Magnum all using SIG 124/125 grain ammo. Don't remember the exact veolocities but the .38 was around 900 and the 9mm 1140 and the .357 1170... There was only 30-40 fps difference between the two. I have two of the LCRs in 9mm and they have been excellent shooters...the clips are also very easy to load and unload with a tool..."



Paul Harrell did a similar chrono test. Good video posted up by the OP of this thread. Eye opening for the 9mm nay sayers. With the tested ammo, the 9mm standard is almost 400 fps faster than a .38 Spl +P, out of the snub revolver.

Ruger LCR 38 vs LCR9mm-facts and myths - Ruger Forum

Before going to the dark side with the Sig 938, a first run 571 series 9mm SP101 was my EDC. Still is when a revolver is warranted. The shorter 9mm cartridge is much easier to carry and a reload with the moons is far faster than a speed loader.

10 years ago when this thread posted the playing field may have been closer. With the introduction of superior 9mm ammo like the Federal HST or Gold Dots the 9mm holds an edge.
Klyde
Attached Images
File Type: jpg DSCN2569.jpg (182.5 KB, 18 views)
File Type: jpg DSCN3017.jpg (125.1 KB, 19 views)

Last edited by KLYDE; 07-28-2019 at 10:33 AM.
Reply With Quote
The Following 3 Users Like Post:
  #43  
Old 07-28-2019, 09:42 AM
gwpercle's Avatar
gwpercle gwpercle is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Nov 2011
Location: Baton Rouge, La.
Posts: 6,838
Likes: 7,393
Liked 8,047 Times in 3,652 Posts
Default

Quote:
Originally Posted by Col Defender View Post
No comparison IMO. The higher velocity of the 9mm more than offsets the (usually) heavier bullet from a .38 Special.
Elmer Keith might disagree with that .
__________________
Certified Cajun
NRA Member
Reply With Quote
The Following User Likes This Post:
  #44  
Old 07-28-2019, 10:17 AM
Gamecock's Avatar
Gamecock Gamecock is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Jan 2010
Location: SC
Posts: 3,533
Likes: 589
Liked 3,637 Times in 1,627 Posts
Default

Plus a revolver allows for a much bigger meplat than an auto. You'll get no feeding problems in a revolver.
__________________
I've still got it made.
Reply With Quote
The Following User Likes This Post:
  #45  
Old 07-28-2019, 09:18 PM
surfgun surfgun is offline
Member
 
Join Date: May 2009
Location: OC
Posts: 502
Likes: 199
Liked 288 Times in 158 Posts
Default

One of the posters is altering his 9mm to shoot .38 Super? A decent quality (strong) .38 Special can safely fire .38 Supers.

Last edited by surfgun; 07-28-2019 at 09:19 PM.
Reply With Quote
  #46  
Old 07-29-2019, 06:44 AM
Gamecock's Avatar
Gamecock Gamecock is offline
Member
9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame 9mm vs .38 in a 2" J frame  
Join Date: Jan 2010
Location: SC
Posts: 3,533
Likes: 589
Liked 3,637 Times in 1,627 Posts
Default

Quote:
Originally Posted by surfgun View Post
One of the posters is altering his 9mm to shoot .38 Super? A decent quality (strong) .38 Special can safely fire .38 Supers.
Did you check SAAMI pressures? I don't believe you did.
__________________
I've still got it made.
Reply With Quote
Reply

Tags
1911, 357 magnum, 38spl, 3913, 442, 547, 610, 637, 640, 642, 940, beretta, ccw, chronograph, colt, j frame, lock, rifleman, ruger, sig arms, silvertips, snubby, snubnose, taurus, winchester

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Some Of My Work...J Frame BBQ,4" N Frame Basket Weave,6.5" N Frame Floral Loop PICS 05CarbonDRZ Gun Leather & Carry Gear 9 11-19-2014 03:27 PM
WTT N frame Targets late, K frame Combats "pics" "SPF" " indiuckian Accessories/Misc - For Sale or Trade 6 01-24-2012 03:10 PM
S&W Marked 6" "N" Frame Holster -"N" Frame Grips ,New! Tractorshaft Accessories/Misc - For Sale or Trade 2 03-19-2010 10:14 PM
Guady "N" frame grips, Factory "K" frame case Model39 Accessories/Misc - For Sale or Trade 2 02-13-2010 02:00 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 03:07 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)