Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Revolvers > S&W Revolvers: 1980 to the Present
o

Notices

S&W Revolvers: 1980 to the Present All NON-PINNED Barrels, the L-Frames, and the New Era Revolvers


Closed Thread
 
Thread Tools Display Modes
  #1  
Old 09-08-2010, 11:39 PM
texboy texboy is offline
Member
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: Aug 2010
Posts: 12
Likes: 0
Liked 1 Time in 1 Post
Default 329PD - Brand New...not ejecting spent casings

I was super excited for this past weekend as I would have the chance to finally shoot my brand new, S&W 329PD (scandium .44Mag). I read up on the best ammo to get (Buffalo) for all around general shooting. Well, I was super disappointed in this $1k gun!! I shot my first 6 rounds out of it, opened the cylinder to eject the spent casings, and quickly found out that they were stuck in the cylinder. I had to go back to the cabin and get a small screw driver to stick down the cylinder and literally beat them out! I then changed over to some Winchester brand ammo in .44Mag and the same thing happened again, but this time they came out a little bit easier. In any case, I've called S&W and they want me to send it back. I'm just pissed because this is a $1k gun and SHOULD NOT be leaving the factory with a problem like this. Anyone else had this experience with the 329PD????
  #2  
Old 09-08-2010, 11:44 PM
Steve_NEPhila Steve_NEPhila is offline
Member
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: Aug 2009
Posts: 397
Likes: 40
Liked 34 Times in 22 Posts
Default

Sell it to me or call up the factory and return it free of charge... the choice is your.
  #3  
Old 09-09-2010, 01:10 AM
jessegpresley jessegpresley is offline
Member
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: Jun 2009
Posts: 296
Likes: 8
Liked 33 Times in 18 Posts
Default

At what price is it okay to have shells stuck in the cylinder?

I ask this because I frequently see the same posts on the 1911 forums, "my 2.5k pistol should be perfect out the box, and not (insert problem here)".
The Following User Likes This Post:
  #4  
Old 09-09-2010, 11:19 AM
dla dla is offline
Member
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: Feb 2010
Posts: 1,100
Likes: 326
Liked 468 Times in 278 Posts
Default

I guess I would ask "why did you post this here?" first, but I know the answer.

S&W will cover the cost of shipping via FedEx, (FedEx will pick it up at your front door), and S&W will turn it around pronto. You should include a write up on what the problem is - with details. S&W isn't going to hassle you because you shot somebody's reloads, etc.

Now for us forum creatures, did you clean/lube the pistol before using? How do the cylinders look?

S&W329pd information
  #5  
Old 09-09-2010, 11:31 AM
dla dla is offline
Member
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: Feb 2010
Posts: 1,100
Likes: 326
Liked 468 Times in 278 Posts
Default

Quote:
Originally Posted by jessegpresley View Post
At what price is it okay to have shells stuck in the cylinder?

I ask this because I frequently see the same posts on the 1911 forums, "my 2.5k pistol should be perfect out the box, and not (insert problem here)".
I know it is very frustrating to spend a grand or more on a firearm, (I don't know about you, but I will still stoop to pick up a $1000 bill), and have it act up. Probably worse for new revolver owners because they've been fed the line about how "reliable" revolvers are. I know I was pretty frosted with the poor quality of my new 329pd.

But what makes S&W more pleasing is their Customer Service - they really do work hard at making things right.

In days of old you had your local gunsmith who would make things right. Nowadays you have forums like this which empower you with the info required to fix stuff. Times have changed.
  #6  
Old 09-09-2010, 12:13 PM
texboy texboy is offline
Member
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: Aug 2010
Posts: 12
Likes: 0
Liked 1 Time in 1 Post
Default

Yes, I did call S&W customer service and they promptly said they would send me a return label. I have heard good things about their service, but dang, still wouldn't expect this out of a S&W brand new revolver. I guess I'm a bit jaded as well because I had to send my Taurus Judge back to Taurus for the exact same reason and they finally returned it after 6 weeks, but really didn't do much to correct the problem. I vowed never to buy another Taurus brand firearm....so to have this happen with my new S&W was just a bit over the top for me.
I should be receiving the shipping label soon and will keep everyone posted on what happens.
  #7  
Old 09-09-2010, 12:52 PM
bbgun bbgun is offline
Member
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: Feb 2010
Posts: 51
Likes: 5
Liked 15 Times in 7 Posts
Default

CANT HELP IT! MAYBE SOMEDAY PRODUCTION SERVICE WILL BE AS GOOD AS CUSTOMER SERVICE THEN I WILL BUY THEIR PRODUCT. I HAD TO SEND BACK MY 329 N. G. FOR THE LONGER FIRING PIN. MAY BE YOUR SUPOSSED TO BUY THE GUN & AUTOMATICALY SEND IT BACK.
  #8  
Old 09-09-2010, 12:58 PM
texboy texboy is offline
Member
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: Aug 2010
Posts: 12
Likes: 0
Liked 1 Time in 1 Post
Default

Well, I'm also hoping that they will give the gun a "once over" and maybe it will get the extra attention it needs and that it should have had before it left the factory. I've also noticed that the cylinder does not swing out very smoothly and actually drags and stops about 75% of the way out....beyond that you actually have to push the cylinder open the rest of the way. None of my other S&W revolvers act like that...those cylinders basically "fall" open on their own accord with no force necessary.

I bought this 329PD at Cabelas and they only had two of them in the store...I chose this one because the other one was actually already rubbing off the metal when the cylinder closed into the gun frame....even the gun manager at Cabelas was unimpressed when he saw this and remarked that it shouldn't be doing that. Again, if this was a $400 Taurus, I guess it is to be expected. But a $1k S&W??????

Anyway, hopefully they will make it right and it will be better than new when it gets back.
  #9  
Old 09-09-2010, 03:33 PM
Roadranger Roadranger is offline
Member
 
Join Date: Aug 2006
Posts: 403
Likes: 0
Liked 46 Times in 28 Posts
Talking

I've been reloading revolver ammo for 43 years now and still remember reading Keith's words on the subject of stuck cases. If they stick, the load's too hot. I know Buffalo ammo is ball's to the wall, but the WW should be fine. I wonder if there was any oil left in the chambers, as this will make even normal loads stick. The 329 I had functioned 100%, including the recoil, which is why someone else has it now. Bob!
The Following 2 Users Like Post:
  #10  
Old 09-09-2010, 04:14 PM
dla dla is offline
Member
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: Feb 2010
Posts: 1,100
Likes: 326
Liked 468 Times in 278 Posts
Default

Quote:
Originally Posted by texboy View Post
Well, I'm also hoping that they will give the gun a "once over" and maybe it will get the extra attention it needs and that it should have had before it left the factory. I've also noticed that the cylinder does not swing out very smoothly and actually drags and stops about 75% of the way out....beyond that you actually have to push the cylinder open the rest of the way. None of my other S&W revolvers act like that...those cylinders basically "fall" open on their own accord with no force necessary.

I bought this 329PD at Cabelas and they only had two of them in the store...I chose this one because the other one was actually already rubbing off the metal when the cylinder closed into the gun frame....even the gun manager at Cabelas was unimpressed when he saw this and remarked that it shouldn't be doing that. Again, if this was a $400 Taurus, I guess it is to be expected. But a $1k S&W??????

Anyway, hopefully they will make it right and it will be better than new when it gets back.
Don't expect them to read your mind - write it down. Be very specific about what you dislike. If the DA trigger is rough, tell them. If you are concerned about the narrow &short firing pin - tell them. Nicks in the paint - tell them. Again, be very specific with your writeup and they will take care of you.
  #11  
Old 09-09-2010, 04:50 PM
texboy texboy is offline
Member
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: Aug 2010
Posts: 12
Likes: 0
Liked 1 Time in 1 Post
Default

Will do! Thanks for the advice.

And yes, the recoil is *impressive*. I even ordered the 500 grips from the S&W store right after I bought the gun....and even with those the recoil has a nasty bite. But this is pure self protection and the ocassional camping trip firearm for me...not a plinker... I also own the 340pd .357 J frame scandium and I don't think the recoil is as bad in that gun as it is the .44 mag.
  #12  
Old 09-10-2010, 11:11 AM
dla dla is offline
Member
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: Feb 2010
Posts: 1,100
Likes: 326
Liked 468 Times in 278 Posts
Default

Quote:
Originally Posted by texboy View Post
Will do! Thanks for the advice.

And yes, the recoil is *impressive*. I even ordered the 500 grips from the S&W store right after I bought the gun....and even with those the recoil has a nasty bite. But this is pure self protection and the ocassional camping trip firearm for me...not a plinker... I also own the 340pd .357 J frame scandium and I don't think the recoil is as bad in that gun as it is the .44 mag.
Even with the X-frame grip, if I shoot more than 75 full-house rounds I'll be bleeding in the web.

But I have other hobbies that make me bleed too, so a little recoil isn't a big deal.
  #13  
Old 09-10-2010, 08:41 PM
44Steve 44Steve is offline
Member
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: Jan 2010
Location: Mentor,Ohio
Posts: 191
Likes: 3
Liked 6 Times in 5 Posts
Default

Hi, Steve here .329PD owner, Been reloading for close to 30 Years. the only time i had cases stick is on my hot loads with 2400 powder .My first Question is there any lines or marks on the out side of the cylinder.The lines would be paralel with the top strap or cyl. holes . This is a sure sign of very high pressure. Second if you shoot reloads out of any gun as light as the 329PD ,you need to shoot only 3 loads and then check for bullet walk or the bullets trying to come out of there cases.
  #14  
Old 09-10-2010, 09:50 PM
texboy texboy is offline
Member
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: Aug 2010
Posts: 12
Likes: 0
Liked 1 Time in 1 Post
Default

44Steve - Nope, I only shoot off-the-shelf ammo. In the case of the 329, I shot 6 rounds of Buffalo brand, and 6 rounds of Winchester. All 12 spent casings had to be pushed or pounded out from the front of the cylinder. The Buffalo *felt* like it had more recoil than the Winchester...but that's just a gut feel. I just looked at the gun and see no lines or markings at all on the cylinder.
  #15  
Old 09-21-2010, 09:59 PM
neubert500 neubert500 is offline
Member
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: Sep 2009
Location: S.E. Tenn
Posts: 54
Likes: 1,221
Liked 49 Times in 14 Posts
Default Full sympathy

I feel your pain. I too bought an over $1000.00 S&W 329PD. First time firing it, frame warped in 18 rounds of 44 SPECIAL. My old Charter arms Bulldog gobbled up the same rounds. Smith and Wesson came through on Customer Service and replaced the frame and had it back to me super quick. I am very happy with the weapon now but still. I also feel that the weapon should have worked from the start, but admit, I want to get another one!
  #16  
Old 09-21-2010, 10:16 PM
texboy texboy is offline
Member
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: Aug 2010
Posts: 12
Likes: 0
Liked 1 Time in 1 Post
Default

OK - So the gun came back today...super fast turnaround from Smith. BUT.......the cylinder still does not seem to fit the spent casings I saved. The paperwork from the S&W shop says they replaced the cylinder, but the spent casings I saved from the first 12 rounds ever fired through the gun still don't fit any better than the first cylinder......AND I even sent S&W one of the spent casings so they could have 1st hand view of the problem. So, now what?? Do I send it back again? Is this just going to be the norm? Did I just get a bad box of Buffalo Bore Ammo??
  #17  
Old 09-21-2010, 10:32 PM
srgvaz's Avatar
srgvaz srgvaz is offline
Member
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: Sep 2009
Location: TEXAS
Posts: 862
Likes: 10
Liked 26 Times in 20 Posts
Default

Quote:
Originally Posted by texboy View Post
OK - So the gun came back today...super fast turnaround from Smith. BUT.......the cylinder still does not seem to fit the spent casings I saved. The paperwork from the S&W shop says they replaced the cylinder, but the spent casings I saved from the first 12 rounds ever fired through the gun still don't fit any better than the first cylinder......AND I even sent S&W one of the spent casings so they could have 1st hand view of the problem. So, now what?? Do I send it back again? Is this just going to be the norm? Did I just get a bad box of Buffalo Bore Ammo??

I have to ask: Are you using the extractor/ejector rod to remove the spent rounds? Or are you expecting for them to fall out by themselves? I don't see how you needed a screwdriver unless your shooting rimless cartridges.
  #18  
Old 09-21-2010, 10:34 PM
Bullseye Smith's Avatar
Bullseye Smith Bullseye Smith is offline
Member
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: Nov 2004
Location: Mountain State
Posts: 3,569
Likes: 56
Liked 379 Times in 149 Posts
Default

Quote:
Originally Posted by texboy View Post
OK - So the gun came back today...super fast turnaround from Smith. BUT.......the cylinder still does not seem to fit the spent casings I saved. The paperwork from the S&W shop says they replaced the cylinder, but the spent casings I saved from the first 12 rounds ever fired through the gun still don't fit any better than the first cylinder......AND I even sent S&W one of the spent casings so they could have 1st hand view of the problem. So, now what?? Do I send it back again? Is this just going to be the norm? Did I just get a bad box of Buffalo Bore Ammo??
You can't go by the spent casings from the old cylinder, the old cylinder could have been bigger in the center of the bore than on the ends. Shoot it and see what the out come is, BE HAPPY - GO SHOOTING .
The Following 2 Users Like Post:
  #19  
Old 09-21-2010, 10:35 PM
srgvaz's Avatar
srgvaz srgvaz is offline
Member
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: Sep 2009
Location: TEXAS
Posts: 862
Likes: 10
Liked 26 Times in 20 Posts
Default

Quote:
Originally Posted by texboy View Post
Will do! Thanks for the advice.

And yes, the recoil is *impressive*. I even ordered the 500 grips from the S&W store right after I bought the gun....and even with those the recoil has a nasty bite. But this is pure self protection and the ocassional camping trip firearm for me...not a plinker... I also own the 340pd .357 J frame scandium and I don't think the recoil is as bad in that gun as it is the .44 mag.
Get some grips that cover the back strap like Pachmayr (presentation, or gripper) grips.
  #20  
Old 09-21-2010, 10:43 PM
texboy texboy is offline
Member
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: Aug 2010
Posts: 12
Likes: 0
Liked 1 Time in 1 Post
Default

I can't use the extractor rod because it's not strong enough to push the casings out.....the only way they would come out was through much effort of basically driving them out from the opposite end. I've never owned a revolver that wouldn't eject spent casings just by simply pushing the extractor rod...but this gun wouldn't do it with two different types of ammo...both off the shelf and high quality ammo to boot.

In any case, I will be shooting it on Friday and will let everyone know how it works out.

Smith did replace the hammer as well and it does look better and is now centered in the gun. Before it was rubbing on the frame and chipping.

Again, just frustrated that a $1k S&W firearm left the factory with these issues!! I guess a sign of the times regarding quality workmanship.
  #21  
Old 09-22-2010, 12:34 AM
HEAD0001 HEAD0001 is offline
Member
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: Sep 2010
Location: RIVESVILLE, WV
Posts: 166
Likes: 0
Liked 6 Times in 3 Posts
Default

Hopefully it works out for you. I have a 329 PD. However I shoot a 240 grain bullet that I cast and enough 2400 to make a moderate 44 Special load. No problems at all, And Mine shoots great. I can hit a brick about every shot off hand at 75 yards with it and have shot a few does with mine, and it really is a joy to carry. After you carry yours a while you will not be so upset about these problems. Tom.

The Following User Likes This Post:
  #22  
Old 09-22-2010, 01:01 AM
remat457 remat457 is offline
Member
329PD - Brand New...not ejecting spent casings  
Join Date: Mar 2005
Location: Seattle, WA
Posts: 645
Likes: 7
Liked 52 Times in 39 Posts
Default

Did you try any other ammo other than the 6 rounds of Buffalo Bore?
__________________
NRA Certified Instructor
  #23  
Old 09-22-2010, 01:47 AM
texboy texboy is offline
Member
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: Aug 2010
Posts: 12
Likes: 0
Liked 1 Time in 1 Post
Default

Yes, also shot 6 rounds of Winchester 44 mag. Same problem, although not *quite* as hard to remove as the Buffalo Bore casings, but still took significant prodding. All ammo was less than a year old....not that it matters. I did not shoot any 44 special....my philosophy is that I bought and paid for a 44 Mag gun and dang it I'm shooting 44 Mag out of it!
  #24  
Old 09-22-2010, 08:45 AM
colt_saa's Avatar
colt_saa colt_saa is online now
SWCA Member
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: Feb 2005
Location: Cocoa Beach, Florida
Posts: 10,559
Likes: 3,037
Liked 22,454 Times in 5,824 Posts
Default

I would see what happens with the new cylinder. If there are other issues that the factory was not made aware of, they will fix those to.

It does not matter if the price of the revolver is $100 or $1000 or even $5,000. No company manufactures 100% perfect products 100% of the time. It is not possible at any price.

While none of us wish to be the owner of the one that got away, it does happen. Fortunately good companies like S&W take care of these issues quickly and painlessly.

Over the decades I have needed to use S&W customer service to resolve an issue or two.

Do not let one firearm condemn an entire company forever. Large companies produce many hundreds of thousands of firearms every year. The few problems that we hear about represents a fairly small percentage.
  #25  
Old 06-11-2021, 09:29 PM
Pdxrn Pdxrn is offline
Member
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: Jun 2021
Posts: 17
Likes: 0
Liked 14 Times in 7 Posts
Default

So did the new cylinder work ?
  #26  
Old 06-11-2021, 09:54 PM
sigp220.45's Avatar
sigp220.45 sigp220.45 is online now
US Veteran
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: Dec 2005
Location: Colorado
Posts: 8,075
Likes: 27,786
Liked 33,575 Times in 5,253 Posts
Default

Quote:
Originally Posted by Pdxrn View Post
So did the new cylinder work ?
From 11 years ago?

You might try a PM - he hasn’t posted in several months.
__________________
“What you got, ain’t new.”

Last edited by sigp220.45; 06-11-2021 at 09:58 PM.
  #27  
Old 06-11-2021, 10:12 PM
SammyJoe's Avatar
SammyJoe SammyJoe is offline
Member
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: May 2021
Location: North Carolina
Posts: 285
Likes: 612
Liked 350 Times in 106 Posts
Default

I have seen this same type of problem on numerous posts within the forum. This has to be a problem that Smith is aware of? Have they said anything about this issue after being called about the problem???
-Sam
__________________
Admirer of Vintage Smiths
  #28  
Old 06-12-2021, 04:11 AM
Neversink n Klapperthal's Avatar
Neversink n Klapperthal Neversink n Klapperthal is offline
Member
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: Sep 2019
Posts: 772
Likes: 1,655
Liked 1,123 Times in 435 Posts
Default

literally the last post that I read was another problem with a new Smith.
  #29  
Old 06-12-2021, 04:29 AM
murphydog's Avatar
murphydog murphydog is offline
Moderator
329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings 329PD - Brand New...not ejecting spent casings  
Join Date: Jun 2007
Posts: 26,782
Likes: 936
Liked 18,875 Times in 9,241 Posts
Default

The OP detailed his 329 PD woes nearly 11 years ago, got his gun back from S & W in 13 days (?!) after sending it in for warranty, never reported on shooting it again or commented on whether the problem was solved.

Hope it was. Thread closed.
__________________
Alan
SWCA LM 2023, SWHF 220
The Following 3 Users Like Post:
Closed Thread

Tags
1911, 329pd, 340pd, cabelas, ejector, extractor, gunsmith, j frame, pachmayr, presentation, scandium, screwdriver, sig arms, smith and wesson, taurus, winchester

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Bodyguard 380 not ejecting spent round c98vols Smith & Wesson Semi-Auto Pistols 12 04-04-2014 09:02 PM
trouble ejecting spent 22 brass sasquatch148 S&W Revolvers: 1980 to the Present 11 07-14-2013 08:34 AM
Problem ejecting spent cases.. RETIRED96 S&W Revolvers: 1961 to 1980 5 05-06-2013 04:09 PM
Mod 18 Revolver Not Ejecting Spent Cases ctkenc S&W-Smithing 23 06-17-2012 04:56 AM
RE: Ejecting shell-casings NobodyElse S&W Hand Ejectors: 1896 to 1961 25 12-17-2007 08:23 AM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 04:01 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)