Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Revolvers > S&W Revolvers: 1980 to the Present
o

Notices

S&W Revolvers: 1980 to the Present All NON-PINNED Barrels, the L-Frames, and the New Era Revolvers


Reply
 
Thread Tools Display Modes
  #1  
Old 11-28-2011, 02:58 PM
zellerSC zellerSC is offline
Member
 
Join Date: Apr 2009
Posts: 522
Likes: 34
Liked 56 Times in 29 Posts
Default 640 .38 ?

Are all these designated as "Centennial?"

I see some have CEN in the S/N, and others don't....I guess the 640 no dash's are the Centennial's?????

Also, are the Centennials more desireable?

Thanks.
Reply With Quote
  #2  
Old 11-28-2011, 03:09 PM
valkyriekl's Avatar
valkyriekl valkyriekl is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Jun 2009
Location: Chantilly, VA
Posts: 950
Likes: 64
Liked 111 Times in 46 Posts
Default

"CEN" in the serial number is a coincidence.

Any concealed-hammer J-frame (40, 42, 340, 342, 442, 640, 642) is called a "Centennial", I believe.
Reply With Quote
The Following User Likes This Post:
  #3  
Old 11-28-2011, 03:40 PM
snubbiefan snubbiefan is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Apr 2011
Location: Southern Mississippi
Posts: 1,861
Likes: 23
Liked 348 Times in 203 Posts
Default

My 640 is a BNA. I agree with the above. My box has Centennial as the feature and I really do not know, or realize any significance in having CEN in the serial number. Sort of like the one I recently purchased. It's "born on date" is the same day as my birthday....not year mind you but the day of the month. Now....that is a real coincidence.
Reply With Quote
  #4  
Old 11-28-2011, 04:26 PM
C.S.63's Avatar
C.S.63 C.S.63 is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Oct 2008
Posts: 826
Likes: 298
Liked 133 Times in 73 Posts
Thumbs up

The 640 when introduced in 89 was .38spl of that the I believe the first run/batch unknown manufactured quantity initially had a "CEN" prefix in the serial number.

The J magnum frame 640 was introduced in 1995 aprox.
Hope this helps a little
Reply With Quote
  #5  
Old 11-28-2011, 07:44 PM
Broadside Broadside is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Apr 2005
Location: Virginia
Posts: 299
Likes: 0
Liked 10 Times in 9 Posts
Default

CEN prefix Model 640 no dashes are marked "Tested for +P+ Use" or something very similar to that. Because of this marking they are considered more desirable than other Model 640 no dashes.

To the best of my knowledge, there is no physical or mechanical difference between the CEN prefix M640 no dashes and other M640 no dashes.
Reply With Quote
The Following User Likes This Post:
  #6  
Old 11-28-2011, 08:02 PM
Maximumbob54's Avatar
Maximumbob54 Maximumbob54 is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Oct 2010
Posts: 7,202
Likes: 9,079
Liked 1,921 Times in 1,043 Posts
Default

I'm more than willing to go with the original 640's with the 1 7/8ths barrel but the new 2 1/4" barrels just don't make me think "Centennial" when I see them. And I own one. And if anyone was sucker enough to trade I would trade it in a second. Any takers???
Reply With Quote
  #7  
Old 11-28-2011, 08:29 PM
linde linde is offline
US Veteran
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Feb 2009
Location: Ozarks of Missouri
Posts: 3,329
Likes: 3,009
Liked 2,922 Times in 992 Posts
Default

Quote:
Originally Posted by zellerSC View Post
Are all these designated as "Centennial?" I see some have CEN in the S/N, and others don't....I guess the 640 no dash's are the Centennial's????? Also, are the Centennials more desireable? Thanks.
Not sure what the factory intended but most of us consider all the model 640s as Centennials. And yes, many of us prefer the original 640 in 38 Special . . . some of which have the "CEN" serial number prefix. They are excellent carry revolvers.

While most of us think of the 640 as having a 1 7/8" barrel, there is also a 3" heavy barrel Centennial in 38 Special that were special ordered by John Jovino, a NY S&W Distributor.

Here is my 1 7/8" which dates to 1991 with a BFZ s/n prefix:



Here is my 3" which dates to 1994 with a BRH s/n prefix:



Russ


CORRECTION: The 3" barrel was available from the introduction of the 640 in 1989 until the 3" was discontinued in 1993. It was the model 60 in the 3" heavy barrel that was special ordered by John Jovino.

Last edited by linde; 11-29-2011 at 04:23 PM. Reason: correction on the 3"
Reply With Quote
The Following User Likes This Post:
  #8  
Old 11-28-2011, 09:08 PM
snubbiefan snubbiefan is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Apr 2011
Location: Southern Mississippi
Posts: 1,861
Likes: 23
Liked 348 Times in 203 Posts
Default

I can "snuggle-up" pretty close.....mine was born in February 1992. Sorry Max....I ain't gonna' trade.
Reply With Quote
  #9  
Old 11-28-2011, 09:40 PM
zellerSC zellerSC is offline
Member
 
Join Date: Apr 2009
Posts: 522
Likes: 34
Liked 56 Times in 29 Posts
Default

Quote:
Originally Posted by Broadside View Post
CEN prefix Model 640 no dashes are marked "Tested for +P+ Use" or something very similar to that. Because of this marking they are considered more desirable than other Model 640 no dashes.


To the best of my knowledge, there is no physical or mechanical difference between the CEN prefix M640 no dashes and other M640 no dashes.
It does have the +p+ on the crane. Thanks for the info.
Reply With Quote
The Following User Likes This Post:
  #10  
Old 11-28-2011, 10:06 PM
cjtraining's Avatar
cjtraining cjtraining is offline
US Veteran
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Jan 2009
Location: Charlotte, NC
Posts: 377
Likes: 489
Liked 168 Times in 67 Posts
Default

My two .38 spls have prefix BKN & BSK 1994's. My M640-3 .357, prefix CFU 2002.
Reply With Quote
The Following 2 Users Like Post:
  #11  
Old 11-29-2011, 02:36 AM
Sonny Crocket Sonny Crocket is offline
US Veteran
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: May 2002
Location: KY
Posts: 435
Likes: 1
Liked 33 Times in 17 Posts
Default

The Centennial is any J frame enclosed hammer revolver produced since 1952 when the original 40 (steel frame) and 42 (airweight) were introduced. They were called the Centennial because they were introduced in the 100th year of S&W being in business. These original two models were produced until 1974 when production ended due to low sales.

In 1989 S&W introduced the 640 in stainless in .38Spl. The first year or so had a CEN prefix in the serial number. S&W started the 3 letter/4 number serial numbers in the early '80s. The prefix CEN came normally in the year 2000 timeframe, but in 1989 I guess Smith thought it would be cool to use it on the reintroduced Centennial, hence CEN. This prefix was stopped sometime in '90/'91 I believe. All the CEN prefixed 640s were marked TESTED FOR +P+ in the bottom of the cylinder window. That was also stopped when the CEN prefixes stopped. Btw...at that time S&W just started using then current serial number prefixes which were in the Bxx range.

Later on in '96 the original 640 was chambered in .357MAG becoming the 640-1 and all manner of other models in different calibers and frame materials were produced since then.

Here are some pics of some Centennials I own/owned over the years. There are more, I just don't have pics of them. The 640 no dash is one of, if not my most, favorite S&W revolver ever. Mine is an early one, CEN0xxx.









Last edited by Sonny Crocket; 11-30-2011 at 12:58 AM.
Reply With Quote
The Following 8 Users Like Post:
  #12  
Old 11-29-2011, 07:32 AM
snubbiefan snubbiefan is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Apr 2011
Location: Southern Mississippi
Posts: 1,861
Likes: 23
Liked 348 Times in 203 Posts
Default

I ran across a blurb somewhere lately that stated any good quality weapon chambered for the 38-special would also safely handle the +p. I think it makes sense, especially in guns like the 640. The construction and quality is the same in those early guns regardless of the serial number prefix. Many 38-specials we see on the market state they will handle +p loads, but are not stamped as such anywhere on the weapon. If you look at the load-tables, +p loads are not that much "hotter" than standard loads....maybe like 10% in the powder charge and generating an increase in pressure from around 15,000 in the special loads up to 17,000 in the +p loads.I doubt that Smith somehow purposely reduced the weapons strength in the models not designated as such. Probably ALL modern-day weapons chambered for the special will easily handle the +p loads. I can't see a manufacturer going to the trouble and expense to make a weapon that would not handle the +p load on purpose if it is designed to handle the special.

Powder manufacturers state there could be as much as a 10 to 15 percent variation in density, so the re-loader has a 10% error already built into the charge if he/she goes by the loading tables. I think it would take more than a +p load to blow the 640 apart. Some folks think the only reason they ever designated the 38-Special as +p was just to sell more expensive ammo and guns so marked anyway. Maybe some of the older weapons would have been pushing the envelope, but not modern-day guns.

Maybe a poor analogy....back-in-the-day you could order a new car with-or-without a heater in it and I know this was the case as recent as 1955. Nowadays....EVERY car comes with a heater.

Last edited by snubbiefan; 11-29-2011 at 08:09 AM.
Reply With Quote
  #13  
Old 11-29-2011, 09:05 AM
gkitch gkitch is offline
SWCA Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Feb 2006
Location: Charleston SC
Posts: 1,521
Likes: 3,791
Liked 1,844 Times in 469 Posts
Default Centennials are the best

Note that the original Centennials featured the grip safety. The classic series also reintroduced this device.
They also concurrently made the humpbacked "Bodyguard", with a concealed but accessible hammer spur and no grip safety. I, for one, do not approve of S&W recycling the Bodyguard name on the current little polymer guns.

I am a huge fan of these revolvers for daily carry and backup. The Centennial is my favorite, with a Model 640 and a 342PD in frequent use.
Reply With Quote
The Following User Likes This Post:
  #14  
Old 11-29-2011, 09:11 AM
zellerSC zellerSC is offline
Member
 
Join Date: Apr 2009
Posts: 522
Likes: 34
Liked 56 Times in 29 Posts
Default

Thanks for all the great info.....especially Sonny C. for his indepth response. And great pics.
Reply With Quote
The Following User Likes This Post:
  #15  
Old 11-29-2011, 01:16 PM
C.S.63's Avatar
C.S.63 C.S.63 is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Oct 2008
Posts: 826
Likes: 298
Liked 133 Times in 73 Posts
Thumbs up

Nice pics all
Sonny thank you on the info of the +P+ if I remember that was a selling point back then on the 640s great info and pics,

linde
those 3" 640s sure balance nice.

(A Grail gun)
Reply With Quote
  #16  
Old 11-30-2011, 09:50 AM
Maximumbob54's Avatar
Maximumbob54 Maximumbob54 is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Oct 2010
Posts: 7,202
Likes: 9,079
Liked 1,921 Times in 1,043 Posts
Default

Quote:
Originally Posted by snubbiefan View Post
I can "snuggle-up" pretty close.....mine was born in February 1992. Sorry Max....I ain't gonna' trade.
Still no?!?!? Huh?!?! Huh!?!?!?


Just having some fun...
Reply With Quote
  #17  
Old 11-30-2011, 12:14 PM
snubbiefan snubbiefan is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Apr 2011
Location: Southern Mississippi
Posts: 1,861
Likes: 23
Liked 348 Times in 203 Posts
Default

Sorry Max.....I detect the "plug in the hole". You almost had me tempted there for a minute.

Yep....I am a NL guy and nothing one can do to cover-up the wart-hole can sway me either way. I have removed locks and covered-up holes for other people....but not for me.
Reply With Quote
  #18  
Old 11-30-2011, 01:07 PM
ibewbull's Avatar
ibewbull ibewbull is offline
US Veteran
Absent Comrade
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Sep 2011
Location: Wisconsin Central State
Posts: 971
Likes: 3,197
Liked 800 Times in 351 Posts
Default

I have a 640 no dash BFVxxx I got it used in 1994 from a friend.
I don't remember the retail price at the time but paid him $225 with a holster and box of .38 RNL.
I like the Bianchi 9R shoulder holster which is no longer made and would not sell either or trade it for anything.
A note on the plus P ammo option. Back in the 70's when +P was not available to the public very easily the one I recall is SUPERVEL. The pressure in these at that time was more than today's +p and possibly even +p+. It was reported that practice with these [old] loads caused accelerated wear. So the guru's of the day recommended practice with standard loads and +P for carry.
I think most of us are not burning up the high priced +P in any amounts which would "blow up" our 640's.
After looking at all the GREAT PHOTOS here I don't feel so obsessive about my thinking about another one. Night sights or a pinned front sight would be nice.
Thanks for the wonderful post to all who are here.
Reply With Quote
  #19  
Old 11-30-2011, 07:33 PM
Maximumbob54's Avatar
Maximumbob54 Maximumbob54 is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Oct 2010
Posts: 7,202
Likes: 9,079
Liked 1,921 Times in 1,043 Posts
Default

Quote:
Originally Posted by snubbiefan View Post
Sorry Max.....I detect the "plug in the hole". You almost had me tempted there for a minute.

Yep....I am a NL guy and nothing one can do to cover-up the wart-hole can sway me either way. I have removed locks and covered-up holes for other people....but not for me.
I'm the same way now. I'm on strike from buying another one now for the same rationale as you. I still have a wart to repair on my 637 and then never again. And I was just joking really. Now that I have the Apex trigger kit in that 640, that is like a dream gun. I don't mind the bulky barrel since it's a .357, but I would still greatly prefer the smaller barrel even if it had to be a .38 special. Really, I wish it could be an original style Model 60.
Reply With Quote
  #20  
Old 11-30-2011, 07:48 PM
snubbiefan snubbiefan is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Apr 2011
Location: Southern Mississippi
Posts: 1,861
Likes: 23
Liked 348 Times in 203 Posts
Default

You did a good job on the hole though...even the hinge-pin hole the plate swings on. Nice job.....really!

I have seen some guys so frustrated about the hole, they have actually tapped it and put a screw in there....that IMHO is the Bubba way...red loctite showing and all. If you hate it that much...don't purchase it as opposed to making a mess out of the gun. There is just not that much material there to tap. I think the plug is the best way. It can always be converted back to an IL if it has to go home for warranty work. Or just simply leave the hole alone. It is not going to hurt a thing.
Reply With Quote
  #21  
Old 11-30-2011, 08:13 PM
Maximumbob54's Avatar
Maximumbob54 Maximumbob54 is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Oct 2010
Posts: 7,202
Likes: 9,079
Liked 1,921 Times in 1,043 Posts
Default

Gray RTV in the small hole since gray epoxy kept popping out. And "The Plug" is really a great buy if you have a hole to fill. I wish it was perfectly flush fitting and held rock solid, but it's close enough and makes it so much more bearable. I was going to tap the hole and put in a set screw but I would have to have cut the screw very careful to not have it look horrible. Maybe I will have to find an original 640 and/or a 60 to keep it company.
Reply With Quote
  #22  
Old 12-01-2011, 12:06 AM
photoman's Avatar
photoman photoman is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Oct 2000
Location: The Great State of Texas
Posts: 5,056
Likes: 522
Liked 1,907 Times in 787 Posts
Default

Quote:
Originally Posted by linde View Post

Here is my 3" which dates to 1994 with a BRH s/n prefix:



Man oh man, that 3" Model 640 is the cat's pajamas!
__________________
Centennial Every Day
Reply With Quote
  #23  
Old 12-01-2011, 01:11 AM
semperfi71's Avatar
semperfi71 semperfi71 is offline
US Veteran
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Nov 2006
Location: Central New Mexico
Posts: 2,677
Likes: 1,179
Liked 1,116 Times in 409 Posts
Default

My M640 was my first S&W stainless revolver.

I had read so many gun articles claiming stainless steel was hard to machine, hard to polish, therefore stainless revolvers would NEVER have the capability to become as smooth, action-wise, as a carbon steel model.

My M640 has as smooth an action as any S&W revolver I own and it shot to point of aim at 25 yards with 158 grain bullets, my load of choice.

I think it is the perfect concealed carry handgun.

And I now buy stainless S&Ws as soon as I can afford them.

__________________
Have guns...will shoot'em.
Reply With Quote
The Following User Likes This Post:
  #24  
Old 12-01-2011, 05:48 AM
lebomm lebomm is offline
Member
640 .38 ? 640 .38 ?  
Join Date: Dec 2008
Location: Seattle
Posts: 1,948
Likes: 38
Liked 821 Times in 490 Posts
Default

Broadside;
Never say never or always with Smith & Wesson. I have a 640-no-dash with CEN prefix (CEN79XX), and no sign of a Plus-P endorsement in yoke cut, cylinder window, underbarrel flat or gripframe.

Larry
Reply With Quote
  #25  
Old 12-01-2011, 08:59 AM
snubbiefan snubbiefan is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Apr 2011
Location: Southern Mississippi
Posts: 1,861
Likes: 23
Liked 348 Times in 203 Posts
Default

semperfi....did yours come new that year with the boot-grips, or did you add those.
Reply With Quote
  #26  
Old 12-05-2011, 12:36 AM
semperfi71's Avatar
semperfi71 semperfi71 is offline
US Veteran
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Nov 2006
Location: Central New Mexico
Posts: 2,677
Likes: 1,179
Liked 1,116 Times in 409 Posts
Default

snubbiefan, it came with the boot grips, it was an option at the time if I recall.
__________________
Have guns...will shoot'em.
Reply With Quote
  #27  
Old 12-05-2011, 03:47 AM
edw794 edw794 is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Sep 2001
Location: subduction zone
Posts: 141
Likes: 43
Liked 66 Times in 28 Posts
Default

CEN model 640 .38 special, marked +p+.

Reply With Quote
The Following 2 Users Like Post:
  #28  
Old 12-05-2011, 07:48 AM
snubbiefan snubbiefan is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Apr 2011
Location: Southern Mississippi
Posts: 1,861
Likes: 23
Liked 348 Times in 203 Posts
Default

71......I guessed right then. I had a set of boot grips that I put on mine and they looked "natural" for the gun. Now mine looks like yours.
Reply With Quote
  #29  
Old 12-05-2011, 09:20 AM
SOUTHPAW SOUTHPAW is offline
Member
640 .38 ?  
Join Date: Apr 2006
Location: Elko,Va.
Posts: 191
Likes: 35
Liked 8 Times in 6 Posts
Default

The one I got is CEN3xxx and has the "TESTED FOR +P+" on her....I also have a 640-1 in 357mag. The action on the 640-1 BSY8xxx is better than the 640. Both of the actions are very nice....But the 640-1 is tops!!!!!!
Reply With Quote
  #30  
Old 12-05-2011, 10:02 AM
snubbiefan snubbiefan is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Apr 2011
Location: Southern Mississippi
Posts: 1,861
Likes: 23
Liked 348 Times in 203 Posts
Default

A trigger question? It may belong some other place, but I will ask it here.

I have several Smith revolvers in various calibers, but this 640 is the first concealed hammer model I have owned. The question...my trigger is very smooth, but I can "feel" the break (take-up) in the trigger more than I can my other Smiths. Is this my imagination, or is this more pronounced "break" a natural thing with the heavy concealed hammer.

It's wonderful for staging the trigger. Maybe it's just this particular gun and the design of the hammer.

Last edited by snubbiefan; 12-05-2011 at 11:01 AM.
Reply With Quote
  #31  
Old 12-09-2011, 09:06 AM
snubbiefan snubbiefan is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Apr 2011
Location: Southern Mississippi
Posts: 1,861
Likes: 23
Liked 348 Times in 203 Posts
Default

Let me ask the question in a different manner. Remember, this 640 ND is my first concealed hammer revolver. Is the trigger-pull LONGER in the concealed hammer lock-work as opposed to the models with hammers.

I fully realize there is some difference within the lock-work as the hammer block is not readily visible when the side plate is popped off. This gun was so clean on the inside and the action was so smooth that I did not take it completely apart, so I honestly admit that I am not sure of the differences in the actions.

I guess I will ask it this way again....does anybody know if the trigger pull is naturally LONGER on the concealed hammer revolvers?
Reply With Quote
  #32  
Old 12-09-2011, 09:32 AM
photoman's Avatar
photoman photoman is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Oct 2000
Location: The Great State of Texas
Posts: 5,056
Likes: 522
Liked 1,907 Times in 787 Posts
Default

It's the same except for no hammer block.
__________________
Centennial Every Day
Reply With Quote
  #33  
Old 12-09-2011, 09:38 AM
snubbiefan snubbiefan is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Apr 2011
Location: Southern Mississippi
Posts: 1,861
Likes: 23
Liked 348 Times in 203 Posts
Default

Good....Now I know I am not missing any parts.

Yep...I realized that right off the bat and I understand the need not to have one. It would be pretty hard to hit a covered-up hammer and cause a discharge by accident. Maybe it's just me, or this particular gun, but the trigger-pull seems long. SMOOTH as silk...just seems longer.

Last edited by snubbiefan; 12-09-2011 at 10:58 AM.
Reply With Quote
  #34  
Old 01-07-2013, 08:10 PM
gc45's Avatar
gc45 gc45 is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Oct 2011
Location: Seattle
Posts: 115
Likes: 14
Liked 245 Times in 46 Posts
Default

Very new to this forum, hope you all don't mind my chimeing in but really love my three J frame revolvers.
Have a 640-1 chambered for 357M although it only gets 38 wadcutters sent down the barrel. Serial number is BUJ05xx but I don't know the year it was made; has unmarked rubber grips so guessing their Hogue; barrel length is 2 &1/8 inch. Also has pinned front site but maybe that is for all of them, I don't know. Being a stock gun the trigger pull is very smooth, never feeling heavy to me. I keep looking for another nice condition 640 but in 38 special. Thanks everyone for this great thread on the 640 Smiths.

GC45

Last edited by gc45; 01-07-2013 at 08:25 PM.
Reply With Quote
  #35  
Old 01-13-2013, 02:27 AM
cube121 cube121 is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Jan 2013
Posts: 1
Likes: 0
Liked 0 Times in 0 Posts
Default

The internal or hamerless j frame was reintroduced in 1989 and designated the 640. The first 1000 produced were the "centenial" and ONLY the first 1000 carry the CEN prefix serial number. If you have one hold on to it. I worked at a shop/range at the time and our S&W rep was able to secure a low serial number one for me. Great gun, I still carry it off duty a lot, even 20+ years later. I hope this does a little to clear up the CEN questions.

Last edited by cube121; 01-13-2013 at 02:31 AM. Reason: typo
Reply With Quote
  #36  
Old 01-13-2013, 02:38 AM
shawn mccarver shawn mccarver is offline
SWCA Member
640 .38 ? 640 .38 ?  
Join Date: Aug 2005
Posts: 7,907
Likes: 3,513
Liked 6,728 Times in 2,620 Posts
Default

Quote:
Originally Posted by zellerSC View Post
Are all these designated as "Centennial?"

I see some have CEN in the S/N, and others don't....I guess the 640 no dash's are the Centennial's?????

Also, are the Centennials more desireable?

Thanks.
The model name Centennial applies to S&W's revolver with the completely enclosed hammer that was introduced in 1952 to commemorate the 100th (Centennial) anniversary of the company. Originally called the Model 40 in steel and the Model 42 (Airweight), the two models were later discontinued. The drive for double action only handguns was one cause for the reintroduction of the enclosed hammer model. When reintroduced, it was in stainless and called the 640 (following S&W's model numbering which was to put a 6 in front of the number to signify stainless). If I recall correctly, the first reintroduction of the 640 intentionally had the CEN-prefix, and they were also laser engraved in the frame window "Tested for +P+" or something to that effect. At the time, that was a big deal. The 640 might have been the only S&W up to that time sold on the commercial market which was specifically approved for +P+.

In any event, the name Centennial applies to a J frame with the enclosed hammer (40, 42, 640, 442, 642, etc.), the name Bodyguard applies to the J frame with the shrouded hammer that you can still cock for single action firing (38, 49, 438, 638, 649, etc.) and the name Chief's Special applies to a J frame with a fully exposed hammer (36, 37, 60, 637, etc.). To make matters more confusing, S&W has from time to time offered the Chief's Special with a bobbed hammer in double action only (37, 60 and perhaps other model numbers for the Chief's Special).

Whether the Centennial is more valuable or not depends on what the purchaser wants.
Reply With Quote
  #37  
Old 07-10-2013, 08:01 PM
pmosley's Avatar
pmosley pmosley is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Dec 2010
Location: North Georgia
Posts: 1,177
Likes: 1,661
Liked 1,841 Times in 559 Posts
Default 640 CEN

Quote:
Originally Posted by cube121 View Post
The internal or hamerless j frame was reintroduced in 1989 and designated the 640. The first 1000 produced were the "centenial" and ONLY the first 1000 carry the CEN prefix serial number. If you have one hold on to it. I worked at a shop/range at the time and our S&W rep was able to secure a low serial number one for me. Great gun, I still carry it off duty a lot, even 20+ years later. I hope this does a little to clear up the CEN questions.
Picked one up today with a serial number of CEN00xx - lower than fifty. Marked as tested for +P+.

What is your source for only the first 1000 being labeled with CEN?

Thanks!

Last edited by pmosley; 07-10-2013 at 08:03 PM.
Reply With Quote
  #38  
Old 07-10-2013, 08:32 PM
shouldazagged shouldazagged is offline
Absent Comrade
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Feb 2013
Location: Louisville, KY, USA
Posts: 19,336
Likes: 53,737
Liked 38,386 Times in 11,801 Posts
Default

My 640 no-dash was built in 1990 according to S&W. It has the CEN prefix and a number above 4000, and is etched inside the grip frame (bottom strap) "Tested For +P+".

It's a very fine little revolver. I see no need for one in .357 Magnum, but whatever suits you is yours to decide. It seems to me you have to really like recoil, flash and blast to shoot .357 stuff in a snubby, even an all-steel one.
__________________
Oh well, what the hell.
Reply With Quote
  #39  
Old 07-10-2013, 08:41 PM
pmosley's Avatar
pmosley pmosley is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Dec 2010
Location: North Georgia
Posts: 1,177
Likes: 1,661
Liked 1,841 Times in 559 Posts
Default

Hmmmmmm, that would debunk that only the first 1000 carried the CEN designation. The mystery remains.

As a previous owner of a ported 640-1 chambered in 357 I concur with your assessment.

I have bigger, heavier guns for that.
Reply With Quote
  #40  
Old 07-11-2013, 09:36 AM
Cal44 Cal44 is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Mar 2013
Location: Northern California
Posts: 3,568
Likes: 5,473
Liked 6,418 Times in 1,861 Posts
Default

Quote:
Originally Posted by snubbiefan View Post
Sorry Max.....I detect the "plug in the hole". You almost had me tempted there for a minute.

Yep....I am a NL guy and nothing one can do to cover-up the wart-hole can sway me either way. I have removed locks and covered-up holes for other people....but not for me.
FWIW, they still make these (or at least 642s) without the lock.

I know because I just bought one new at a LGS.

The one in the display case had no lock, but the ones in the back room did. I took the one without the lock.

I don't know if mine has no lock because S&W just makes some percentage without the lock, or what.

Dave
Reply With Quote
  #41  
Old 03-15-2015, 08:10 AM
ggallen ggallen is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Dec 2013
Posts: 2
Likes: 0
Liked 0 Times in 0 Posts
Default Great Thread - need more help

Thank you everyone for the education on the 640. I still have a couple questions.

I loooking at purchasing a 640-1 today that has CEN as the serial prefix. If CEN was used as an introductory number of the model and the 640-1 came after the 640, why does it have CEN in the serial number?

Also, this particular 640-1 has two rectangular (ish) ports at the tip of the barrel. I was at a different gun store yesterday and they had the same handgun with the ported barrel like the one I was purchasing. The serial number of that one had a serial prefix of CAP. The gentleman at the shop told me that this one was a Performance Series 640-1 . I asked how he knew that and he said it was because of the porting. Is that a correct statement?

Are both of these 640-1's Performance Series?

Thank you in advance for your reply.
Reply With Quote
  #42  
Old 03-15-2015, 09:49 AM
linde linde is offline
US Veteran
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Feb 2009
Location: Ozarks of Missouri
Posts: 3,329
Likes: 3,009
Liked 2,922 Times in 992 Posts
Default

Quote:
Originally Posted by ggallen View Post
. . . I am looking at purchasing a 640-1 today that has CEN as the serial prefix. If CEN was used as an introductory number of the model and the 640-1 came after the 640, why does it have CEN in the serial number? . . .
I don't know the answer but can speculate.

We do know . . .
(1) The 640 was introduced in 1989 with early production using the CEN s/n prefix to commemorate the CENtennial;
(2) the 640-1 was introduced in 1996 on the newly designed J magnum frame and introduced in 357 magnum, and
(3) it wasn't until late 2000 or early 2001 that CEN prefix came up in the normal alphabetic rotation.

Theory . . . the factory didn't use up all 10,000 CEN-prefix serial numbers in 1989-1990 so when it came up in normal rotation in late 2000 they used the rest of the number combinations. (we've been told many times the factory didn't waste anything so perhaps that applied to serial numbers as well )


Quote:
Originally Posted by ggallen View Post
. . . Also, this particular 640-1 has two rectangular (ish) ports at the tip of the barrel. I was at a different gun store yesterday and they had the same handgun with the ported barrel like the one I was purchasing. The serial number of that one had a serial prefix of CAP. The gentleman at the shop told me that this one was a Performance Series 640-1 . I asked how he knew that and he said it was because of the porting. Is that a correct statement?

Are both of these 640-1's Performance Series?
You didn't mention if the 640-1 Centennials you were looking at were both on the J-magnum frame with 2 1/8" bbl and chambered in 357 magnum but . . . assuming they are . . .

The CEN s/n prefix example may have been ported by a previous owner or there was a special Performance Center run that isn't documented in Chapter X of the Standard Catalog of S&W 3rd edition.

The CAP s/n prefix example would have been circa Feb 1996 and in 1996 the Performance Center did produce an RSR Special that was Mag-Na-Ported. They reportedly had Heritage walnut grips and an unfluted cylinder with a glass bead finish.


That is what little I know . . . and a lot I don't . . . but offer up for discussion. Perhaps others have examples to add.

Russ
Reply With Quote
  #43  
Old 08-22-2018, 03:28 PM
dpast32 dpast32 is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Oct 2004
Location: Southern New England
Posts: 243
Likes: 77
Liked 210 Times in 107 Posts
Default

OK Guys, I guess I'll bite. I had, but have since sold one of early 640's. Pre- 'J Magnum' frame, but w/o the +P+ mkg. Beautiful little revolver, but too heavy for hide away back up duty. I sold it off, & picked up a 642 'Ladysmith'. And yes, it did take me a little soul searching to determine if I could deal with carrying a Ladysmith, but it did come with some advantages. It came with a beautiful D/A, & was factory Magna-Ported. The porting was just too useful to pass up. I 'be carried daily ever since it was sighted it. It handles 135+P's just like 148 gr. FWC's, so needless to say I'm quite pleased with it. Mine is Serial # CAP-2XXX, with Factory Product # 103808. I've always loved both 2" & 3" bbl'd revolvers. Even now, in the day of the compact auto, I still have 2 S&W's, & 2 alloy Colts. Just can't seem to part with them.

Best, dpast32
Reply With Quote
  #44  
Old 11-22-2020, 11:20 AM
BlueLineNYPD BlueLineNYPD is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Jun 2015
Posts: 12
Likes: 1
Liked 9 Times in 6 Posts
Default 640 Centennial purchased in 1991.

My 640 That I purchased brand new in 1991.
Attached Images
File Type: jpg 66E044A5-D2EB-4E7B-8F58-D86D520C314D.jpg (68.5 KB, 46 views)
File Type: jpg 560DC618-B8D8-4C6B-824E-46266CEF9C59.jpg (39.3 KB, 62 views)
Reply With Quote
  #45  
Old 07-30-2021, 09:32 AM
dpast32 dpast32 is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Oct 2004
Location: Southern New England
Posts: 243
Likes: 77
Liked 210 Times in 107 Posts
Default

Good Morning Folks, This may be an unanswerable question, but I'm going to ask anyway, just in case someone does happen to possess that knowledge ? S&W's Model 640, w/ 3" Barrel was only produced for approximately 3 +/- years, according to most sources. Based upon my own observations, along with those by others, this particular Model appears to have been observed very infrequently, which based upon the short production span, would lead us to believe it was manufactured in quite limited numbers ? If anyone happens to have any information regarding the approximate quantities of M-640 3" versions produced, I would truly appreciate hearing from them, THANK YOU

[ RE: My 3" bbl'd M-640 [ no dash ] is Serial # BFV5XXX. Be advised that I am also able to provide any related Box Label data, if requested. ]

Best, dpast32

Last edited by dpast32; 07-30-2021 at 03:10 PM.
Reply With Quote
  #46  
Old 07-30-2021, 09:37 PM
Lobster Picnic Lobster Picnic is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Aug 2010
Posts: 1,561
Likes: 383
Liked 988 Times in 535 Posts
Default

Since the hammerless design was to facilitate pocket carry, the 3" model probably sold in very small numbers.

A 640 ND is high on my bucket list.
Reply With Quote
  #47  
Old 07-30-2021, 10:11 PM
.38SuperMan .38SuperMan is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Dec 2018
Location: East Tennessee
Posts: 1,367
Likes: 1,276
Liked 3,090 Times in 866 Posts
Default

I have a no dash I bought new in the early to mid 90’s. I don’t remember the year but the prefix is BPN and is not marked +P+. It’s one of the few guns I’ve never been tempted to sell and I certainly wouldn’t trade it for one of the 357 versions.

Last edited by .38SuperMan; 07-30-2021 at 10:13 PM.
Reply With Quote
  #48  
Old 07-31-2021, 09:44 AM
dpast32 dpast32 is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Oct 2004
Location: Southern New England
Posts: 243
Likes: 77
Liked 210 Times in 107 Posts
Default

Yes, I too surmise that the 3" 640's were produced in somewhat limited numbers, although I would still love to know at least an approximate total ? Some Folks say them as not very useful, & or efficient for concealed carry, due of course to the extra 1" in OAL, plus being a bit heavy as opposed to the Airweight examples. I'll also admit that they tend to be a 'specific purpose, or application' type of Revolver, ill suited to pocket type carry. But, for some purposes it remains an excellent prospect, exhibiting all the well known attributes of the 3" barreled Revolver, such as manageable recoil, along with better shot to shot recovery, somewhat better accuracy, enhanced velocity, etc. They are especially well suited to those that tend to be recoil shy, who have smaller, weaker hand strength, although the longer DAO system may prove to be an issue, & must be investigated on an individual basis. I for one highly recommend this model for 'Home Defense' type duties, where the only foreseeable issue 'might' possibly be an 'capacity' issue, which of course will depend upon the overall scenario, & the skill level of the end user. Now, if S&W would only produced it with an Alloy Frame, that would IMHO be a true winner & should, hopefully sell quite well. Long live the whole 'Centennial Series' !

Best, dpast32
Reply With Quote
The Following User Likes This Post:
  #49  
Old 07-31-2021, 10:29 AM
CH4's Avatar
CH4 CH4 is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Jul 2014
Location: Mojave Desert
Posts: 10,248
Likes: 17,882
Liked 23,916 Times in 6,782 Posts
Default

I have 3 centennials. I like em all equally for their individual characteristics, but the shorter .38 is a little handier; the 9.7 ounce 342PD is sure nice for pocket carry. My 296 has identity issues. Somedays it identifies as a bodyguard, others a centennial. Once you go hammerless, you never go back.
__________________
213th FBINA

Last edited by CH4; 07-31-2021 at 10:37 AM.
Reply With Quote
The Following User Likes This Post:
  #50  
Old 07-31-2021, 12:05 PM
dpast32 dpast32 is offline
Member
640 .38 ? 640 .38 ? 640 .38 ? 640 .38 ?  
Join Date: Oct 2004
Location: Southern New England
Posts: 243
Likes: 77
Liked 210 Times in 107 Posts
Default

10-04 on that 'CH4' !! As I was compiling the above Post, I thought about mentioning the old Model 296, & noting just how close I came to buying one back when they were initially introduced. But, if you recall that back then, although it really wasn't that long ago, very few 'real' .44 Special defensive Factory Loads were available on the market. Also, IIRC, S&W had stipulated that only 200 grains or under were suitable for use in it. [ As so marked on the right hand barrel flat. ] So due to it's 'restrictions', along with the fact that the .44 Special doesn't exhibit an overabundance of velocity in it's Factory Loadings. Another subsequent issue plus the fact of being regulated to the 200 grain projectiles, I became concerned as to how their 'Fixed Sights' were Factory regulated, or sighted in. Back then, the Standard .44 Special Loading was something like an 246 grain LRN at around 750 +/- FPS via a 6" barrel. So, had S&W regulated their new M-296 for a 200 grain head, or simply stuck with the standard, 246 LRN ? All in all there was much to like, in addition to great promise for the 296 Models, but when I began factoring in the size & capacity data, as opposed to my Alloy Colt Commander .45 ACP, I just couldn't justify buying yet another gun I honestly didn't need ! Right now though, I truly wish I had grabbed one !! And lastly, S&W really should have produced it with the 3" barrel, as I feel it may have sold somewhat better than it did ?

Best, dpast32
Reply With Quote
Reply

Tags
340, 38spl, 442, 637, 640, 642, airweight, bianchi, bodyguard, centennial, concealed, j frame, jovino, lock, model 60, polymer, sig arms

Thread Tools
Display Modes

Posting Rules
Forum Jump

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 07:41 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)