Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Revolvers > S&W Revolvers: 1980 to the Present
o

Notices

S&W Revolvers: 1980 to the Present All NON-PINNED Barrels, the L-Frames, and the New Era Revolvers


Reply
 
Thread Tools Display Modes
  #1  
Old 12-11-2011, 10:35 PM
10-12 10-12 is offline
Member
 
Join Date: Dec 2004
Location: Central Florida
Posts: 456
Likes: 0
Liked 9 Times in 7 Posts
Default Mdl 27-2 vs. Mdl 60-7 Fair Trade?

I hope this is posted in the correct area.

This involves a proposed trade between a Model 27-2 with a four inch barrel and a Model 60-4 Lady Smith.

The Model 27-2 is about 75-85 % blue remaining, Pachmayr grips, target hammer and trigger, good and tight, no box or docs.

The Lady Smith is near new, probably has original wood grips with S&W inserts, fired very little. I don't know if it has the box and docs or not. How would that affect the trade?

The offer is a straight trade. I have not seen the gun so, obviously, I would verify the preceding before trading.

He wants something bigger since he has difficulty with the little Lady Smith. He handled the Model 27 and liked the feel. He offered a straight trade. Normally a Model 27-2 4-inch would go for a lot more money, I think. However, considering the difference in condition would this make them about equal in a trade?

So far communication has been by phone. Before we meet, which will involve driving out of town, I would appreciate your thoughts.

What do you pros think?

Thanks,

Bill

PS Would the Model 60-4 have the 1 7/8 inch barrel or the longer 2 1/2 Inch barrel?
Reply With Quote
  #2  
Old 12-11-2011, 10:47 PM
Dump1567's Avatar
Dump1567 Dump1567 is offline
Member
Mdl 27-2 vs. Mdl 60-7 Fair Trade? Mdl 27-2 vs. Mdl 60-7 Fair Trade? Mdl 27-2 vs. Mdl 60-7 Fair Trade? Mdl 27-2 vs. Mdl 60-7 Fair Trade? Mdl 27-2 vs. Mdl 60-7 Fair Trade?  
Join Date: Feb 2003
Location: AZ
Posts: 2,339
Likes: 53
Liked 4,622 Times in 864 Posts
Default

It depends on what you want. I would supect the 27-2 would sell for over $500, where as the 60-4 would sell for under $500. Personally, I wouldn't trade, but if the model 60 is what you want, than go for it.

The better option would be to sell the 27-2 and buy the gun you want with the money.

Shoot, I've got a LNIB 642 Pro in the FS section I'd gladly trade you for your 27.
__________________
Watch & Pray
Reply With Quote
  #3  
Old 12-11-2011, 10:57 PM
10-12 10-12 is offline
Member
 
Join Date: Dec 2004
Location: Central Florida
Posts: 456
Likes: 0
Liked 9 Times in 7 Posts
Default

Thanks for that good advice. I don't particular want the 60-4 unless it has the longer barrel. That 1 7/8 inch barrel is too short for my old eyes. I was thinking of selling the Model 27-2 locally and would be asking less than $500 so your information is really great to learn.

Thanks and Merry Christmas,

Bill
Reply With Quote
  #4  
Old 12-12-2011, 02:13 AM
gagunner 2 gagunner 2 is offline
US Veteran
Mdl 27-2 vs. Mdl 60-7 Fair Trade? Mdl 27-2 vs. Mdl 60-7 Fair Trade? Mdl 27-2 vs. Mdl 60-7 Fair Trade? Mdl 27-2 vs. Mdl 60-7 Fair Trade? Mdl 27-2 vs. Mdl 60-7 Fair Trade?  
Join Date: Mar 2009
Location: georgia
Posts: 263
Likes: 4
Liked 29 Times in 22 Posts
Default

Something doesn't sound right. the model 60-4 wasn't a Ladysmith.
It is a .38 special & has a 3' full underluged barrel and adjustable sights.I have 2 of them and wouldn't part with either!!
If I had a model 27 in 4",it wouldn't go either.
Reply With Quote
  #5  
Old 12-12-2011, 02:47 AM
fyimo's Avatar
fyimo fyimo is offline
Member
Mdl 27-2 vs. Mdl 60-7 Fair Trade? Mdl 27-2 vs. Mdl 60-7 Fair Trade? Mdl 27-2 vs. Mdl 60-7 Fair Trade? Mdl 27-2 vs. Mdl 60-7 Fair Trade?  
Join Date: Jan 2009
Location: Arkansas
Posts: 18,773
Likes: 6,048
Liked 5,762 Times in 1,992 Posts
Talking

Well other then it's a 4 inch Model 27-2 nothing sounds very attractive about it having only 85% of its original finish and its wearing rubber grips so I'd say trade it for whatever you think is of equal value.
I'm saying that because a revolver in that condition is well into the shooter only grade to me so its value is greatly diminished.
Reply With Quote
  #6  
Old 12-12-2011, 07:00 AM
Sportsterguy's Avatar
Sportsterguy Sportsterguy is offline
Member
Mdl 27-2 vs. Mdl 60-7 Fair Trade? Mdl 27-2 vs. Mdl 60-7 Fair Trade? Mdl 27-2 vs. Mdl 60-7 Fair Trade? Mdl 27-2 vs. Mdl 60-7 Fair Trade? Mdl 27-2 vs. Mdl 60-7 Fair Trade?  
Join Date: Dec 2005
Location: Ask the NSA
Posts: 2,208
Likes: 111
Liked 119 Times in 73 Posts
Default

Which one will you be shooting and using the most often? A nice reblue on that 27 would bring it back to its former beauty for a couple hundred bucks and you have one of the most desirable S&W's ever made.

I'd personally NEVER trade a 27 in yours condition for a model 60! JMO.
__________________
V/R
Roger / SG
Reply With Quote
  #7  
Old 12-12-2011, 11:41 AM
10-12 10-12 is offline
Member
 
Join Date: Dec 2004
Location: Central Florida
Posts: 456
Likes: 0
Liked 9 Times in 7 Posts
Default

GaGunner 2,

I have not seen it, only spoken with the man about it. Over the years I do seem to recall seeing what look liked a gussied up Model 60 with service sights, fancy grips, and Lady Smith written on the side. But I could be wrong on that score.

Thanks,

Bill
Reply With Quote
  #8  
Old 12-12-2011, 11:46 AM
10-12 10-12 is offline
Member
 
Join Date: Dec 2004
Location: Central Florida
Posts: 456
Likes: 0
Liked 9 Times in 7 Posts
Default

Gentlemen,

Thanks to all of you for your insightful replies. Based on your comments I think I will pass.

Again, thanks for taking the time to respond.

Bill
Reply With Quote
  #9  
Old 12-12-2011, 12:01 PM
Camster Camster is offline
Member
Mdl 27-2 vs. Mdl 60-7 Fair Trade? Mdl 27-2 vs. Mdl 60-7 Fair Trade? Mdl 27-2 vs. Mdl 60-7 Fair Trade? Mdl 27-2 vs. Mdl 60-7 Fair Trade? Mdl 27-2 vs. Mdl 60-7 Fair Trade?  
Join Date: Sep 2001
Posts: 3,795
Likes: 993
Liked 1,923 Times in 956 Posts
Default

Unless you had a burning desire for that Model 60, I think that you did the right thing.There's just something about a 27 like yours,be it the heavy duty,man size appeal of it,the target features,the barrel length,that makes it a comfortable old friend that should stick around,even if it isn't in prime cosmetic condition.The Pachs can be changed out anytime you wish,if wood is your thing.
Reply With Quote
  #10  
Old 12-12-2011, 12:45 PM
Iggy's Avatar
Iggy Iggy is offline
Member
Mdl 27-2 vs. Mdl 60-7 Fair Trade? Mdl 27-2 vs. Mdl 60-7 Fair Trade? Mdl 27-2 vs. Mdl 60-7 Fair Trade? Mdl 27-2 vs. Mdl 60-7 Fair Trade? Mdl 27-2 vs. Mdl 60-7 Fair Trade?  
Join Date: Oct 2003
Location: Wyoming
Posts: 10,419
Likes: 10,417
Liked 28,226 Times in 5,272 Posts
Default

Whew!! Had me worried there for while. Unless you had a specific need for the ladysmith, I think you did the right thing.
Reply With Quote
  #11  
Old 12-12-2011, 02:01 PM
10-12 10-12 is offline
Member
 
Join Date: Dec 2004
Location: Central Florida
Posts: 456
Likes: 0
Liked 9 Times in 7 Posts
Default

Camster and Iggy,

Thanks for the encouraging words.

Camster,
Even though I have a Model 686 that shoots and handles like a dream and I have no real need for the 27, still I am sure I would have wished I had it back had I traded. I agree with you about the handling characteristic of the 4-Inch Model 27. It has a certain appeal that can’t be fully quantified. I still might trade or sell it but I am no longer tempted to practically give it away thanks to you folks on the forum.

Iggy,
Thanks to you and the other forum members for helping me get my head on straight. The man initially told me he had a Lady Smith he wanted to trade. I thought it might be the Model 65 which I was interested in. Turns out, it is the J-Frame. My interest ebbed at that point. I must confess I am not thrilled about carrying a gun that has “Lady” written on it but I do like the slicked action and barrel lug on the Model 65 version.

Again thanks to everyone.

Bill
Reply With Quote
  #12  
Old 12-12-2011, 07:52 PM
tom turner's Avatar
tom turner tom turner is offline
US Veteran
Mdl 27-2 vs. Mdl 60-7 Fair Trade?  
Join Date: Jan 2006
Location: Georgia
Posts: 1,814
Likes: 180
Liked 2,270 Times in 285 Posts
Default

Just saw this thread. Glad you posted and got some sound advice!!!
Reply With Quote
  #13  
Old 12-12-2011, 10:10 PM
10-12 10-12 is offline
Member
 
Join Date: Dec 2004
Location: Central Florida
Posts: 456
Likes: 0
Liked 9 Times in 7 Posts
Default

Quote:
Originally Posted by tom turner View Post
Just saw this thread. Glad you posted and got some sound advice!!!
Thanks Tom.

It is my favorite forum and has never let me down.

Bill
Reply With Quote
Reply

Tags
642, 686, ladysmith, model 27, model 60, model 65, model 686, pachmayr

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Would it be a fair trade? potpot821 Smith & Wesson Semi-Auto Pistols 11 03-31-2015 02:20 AM
Is this a fair trade? cmil333 S&W Revolvers: 1961 to 1980 12 02-18-2013 12:35 AM
was this a fair trade? stan j S&W Revolvers: 1961 to 1980 11 02-15-2013 08:01 PM
Fair Trade? My Sig 226 for his M17-3? Super Dave S&W Revolvers: 1980 to the Present 26 01-10-2012 08:41 AM
Fair trade? Raimundo S&W Revolvers: 1961 to 1980 9 09-13-2011 05:17 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 07:10 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)