It would be more cost effective to trade the 14 for something you like. Short barrels are more popular than long so you’d probably have to ad a little cash to get someone to trade you a similar condition 2” 15 for your 8 3/8” 14, and even more for a 2 1/2” 19. 4” 15s are so common that you might get one in better condition than your long tom straight across.
You never know until you try and that all assumes you advertise WTT here or some other place that’s free and trade with another collector. Stores want to make 50% to 100% reselling a trade in.
Now that the smart advise is behind us, lets get to the fun stuff, making a project out of your 14. My guess is that as long as you are happy with 3” or longer it would be less expensive to have your barrel shorted and a new sight attached than buying a shorter barrel and having it fitted. Shortening it below about 3” would be impractical because the locking lug would have to be relocated. A few months ago S&W quoted me $100 including return shipping to change barrels. I would have had to ship my revolver to them for about $45. Changing barrels at my local smith has cost $90 to $110 in recent years. Setting a 19 barrel back to meet a 14 cylinder would cost more. The gunsmithing is in addition to locating and buying a barrel.
If you rebarrel one consideration is the width of the top front of the frame. Your 14’s frame is wide to mate with a wide rib. The top front corners of 4” 15 frames are beveled to match a narrow rib so a 4” 15 barrel will look wrong by traditional standards. However, most people won’t notice and at least some batches of Mountain Guns are made that way. 2” 15 barrels have a wide rib that will match your frame and might be your best choice if you rebarrel. 2 ½” 19 barrels also have a wide rib but they’d require more time in the lathe setting the shoulder back and shortening both the 2 ½” ejector rod and center pin.
|
Linear Mode
