Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Revolvers > S&W Revolvers: 1980 to the Present
o

Notices

S&W Revolvers: 1980 to the Present All NON-PINNED Barrels, the L-Frames, and the New Era Revolvers


Reply
 
Thread Tools Display Modes
  #1  
Old 07-14-2016, 04:00 AM
Rebelfan Rebelfan is offline
Member
New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions  
Join Date: Jul 2016
Location: Las Vegas
Posts: 2
Likes: 6
Liked 0 Times in 0 Posts
Default New Member & Model-60 Owner With A Couple Questions

Hello everyone, new member and first post.

After testing a number of small revolvers my wife and I recently purchased a Model 60 with the 2 inch barrel. This will be my wifes primary concealed firearm.

Had a few of questions.

We purchased the model chambered for .357 however we plan on only shooting .38 special out of it at the range. (Even though we don't plan on shooting much, if any .357 out of this revolver, having that option seemed worth the extra $10)

Are +P ok for the range or is it better to stick with standard pressure?

Any suggestions for defensive carry ammo?

Any maintenance or cleaning tips would be appreciated.

Have read some posts about the internal locks being an issue in the comment sections on Youtube. Is this truly a big issue or something that is being blown a little out of proportion. (As most things are on the internet)


Thank you in advance for any info/opinions and feedback.

Last edited by Rebelfan; 07-14-2016 at 04:07 AM. Reason: Spelling
Reply With Quote
  #2  
Old 07-14-2016, 07:03 AM
Longhorn1986's Avatar
Longhorn1986 Longhorn1986 is offline
Member
New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions  
Join Date: Jun 2016
Location: Fort Bend County, Texas
Posts: 254
Likes: 280
Liked 386 Times in 150 Posts
Default

I've had a Model 60 since right after they came out in .357. +P seems like a waste of money for regular range practice. Occasionally shooting it to get used to the additional recoil is fine, but stick with regular .38 for the most part. As far as defensive ammo, if you ask 20 people, you'll likely get 20 different answers. Cleaning? Keep the bore clean, bronze brush the cylinder faces and around the forcing cone and occasionally hit it with some Rem oil.

Internal locks? Much ado about nothing.
__________________
Get off my lawn!
Reply With Quote
The Following 5 Users Like Post:
  #3  
Old 07-14-2016, 07:37 AM
Old cop Old cop is offline
US Veteran
New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions  
Join Date: Oct 2010
Posts: 7,782
Likes: 4,206
Liked 15,128 Times in 4,142 Posts
Default

I agree w/the above. As to which self defense ammo to use the old FBI 158 grain +P (used it during my LEO career) has an excellent street record. Also, Speer 135 grain +P also has a good record with the NYPD. If you do a YouTube search on the topic there's lots of info out there.
__________________
Old Cop
LEO (Ret.)

Last edited by Old cop; 07-14-2016 at 07:38 AM.
Reply With Quote
The Following 4 Users Like Post:
  #4  
Old 07-14-2016, 07:39 AM
msauter msauter is offline
Member
New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions  
Join Date: Jul 2009
Location: Virginia
Posts: 166
Likes: 62
Liked 464 Times in 95 Posts
Default

Congrats on your new revolver, the Model 60 was a good choice. Stick with standard pressure .38 rounds for range use, especially if your wife may be a little sensitive to recoil. For carry use, Federal Premium sells a 110 Grain Hydra-Shok JHP Personal Defense - Low Recoil round that is an option if recoil does become an issue.
Reply With Quote
The Following User Likes This Post:
  #5  
Old 07-14-2016, 08:10 AM
Green Frog Green Frog is online now
Member
New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions  
Join Date: Jul 2010
Location: Central VA
Posts: 8,596
Likes: 1,551
Liked 9,320 Times in 4,181 Posts
Default

Quote:
Originally Posted by Old cop View Post
I agree w/the above. As to which self defense ammo to use the old FBI 158 grain +P (used it during my LEO career) has an excellent street record. Also, Speer 135 grain +P also has a good record with the NYPD. If you do a YouTube search on the topic there's lots of info out there.
Old cop,

I like what you said here but wonder, is there a current source for the old FBI load you mention? Back in about 1979 an acquaintance in the FBI gifted me with most of a box of then-current ammo with nickel plated brass and a blue "Ny-clad" HPSWC bullet. I'm down to less than 20 of them now and would love to have a couple of boxes to use for serious work in my Model 60-4 and other CCW 38s.

TIA- Froggie
Reply With Quote
  #6  
Old 07-14-2016, 08:24 AM
Young Gun's Avatar
Young Gun Young Gun is offline
Member
New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions  
Join Date: Jul 2016
Location: Charleston, SC
Posts: 30
Likes: 4
Liked 5 Times in 5 Posts
Default

As for the locks, they can easily be removed. I was gifted a brand new 586 with a 4" barrel and my first day at the range caused a lock up when shooting single action. (luckily I was at a range at a local store that provided gunsmithing) So I had to get some work done and had the lock removed on that particular handgun, while my new model 69 still has the lock, it has had about 500 rounds through it and no lockup.

I would just remove it and be done with it. I plan on it with my model 69.

Last edited by Young Gun; 07-14-2016 at 08:25 AM. Reason: P.s note
Reply With Quote
  #7  
Old 07-14-2016, 10:06 AM
BB57's Avatar
BB57 BB57 is offline
Member
New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions  
Join Date: Feb 2015
Location: NC
Posts: 4,710
Likes: 3,527
Liked 12,554 Times in 3,342 Posts
Default

The Model 60 is a good choice. The extra weight of the steel frame makes the recoil much more pleasant and the rubber grips on the Model 60-14 and Model 60-15 are well sized for small female hands.

Guys will probably want to get a Hogue Monogrip and if your spouse's hands are not small the Hogue might be a better option for her as well.

The standard pressure .38 load is considered a standard for law enforcement and got the job done for decades - BUT - that was in 4" length revolvers. There are not any standard pressure .38 loads that have a great track record when shot out of a 1 7/8 or 2 1/8" barrel.

That basically means you need to use a .38 +P load in a 1 7/8" or 2 1/8" barrel to regain the same level of terminal performance offered by a standard pressure .38 in a 4" barrel.

With comfortable recoil absorbing grips that also push the middle finger mostly below the trigger guard, and in a steel frame J-frame revolver, .38+P are not unpleasant to shoot. On the other hand the J-frame is something of an experts gun and it rewards plenty of practice if you want it to be effective as something other than psychological weapon. In that regard people will shoot it a lot more if they practice with standard pressure .38 special.

I suggest practicing with a standard pressure 158 gr LSWC load, particularly if you're shooting a 110, 125 or 135 gr +p defense load as the differences in recoil will be less. The lighter and faster bullets will print a couple inches lower on the target than the 158 gr load, but that won't make any difference at social shooting distances in a self defense situation.

-----

I agree the lock is a total non issue.

The only incident I had with mine was experimenting with the lock shortly after I bought my Model 60-14, locking it, apparently failing to unlock it, then going to the range and discovering it was locked while not having a key along with me.

At the time I was not 100% sure I made that mistake, or at least I was not willing to admit it as there's always a temptation to accuse the lock of locking itself rather than owning to your own mistake. However, after 3000 plus rounds total through my Model 60-14 and Model 60-15, with a significant number of +P rounds, a fair number of .357 rounds, and extensive all day daily carry, I have to say that I just don't believe that lock is ever going to just lock itself.

It's possible a shooter my screw up with the key and fail to unlock it, if they've had it locked and not notice the failure to unlock as the indicator is small, but I just don't buy the reports that they lock themselves.

-----

As noted above the Speer 135 gr Gold Dot +P load demonstrates good short barrel performance as the 125 gr +P Gold Dot.

Other good loads that will reliably expand and achieve at least 12" of penetration from a snub nose 38 are:

Winchester +p 158-grain LSWCHP
Winchester +P 125-grain SJHP
Winchester +P 125-grain Silvertip HP
Winchester +P 130-grain SXT Personal Protection
Hornady 125-grain XTP

The Hydrashock loads expand well at 2" .38 velocities as do the 129 gr Nyclad bullets which expands superbly, but they all under penetrate by 1-3 inches.

In contrast the 158 gr Nyclad bullet will slightly over penetrate as it fails to expand significantly.

----

If you hand load you have some other options with a Model 60.

The Hornady 125 gr XTP is a good choice for a marginal cartridge like the .38 Special as it has a more moderate expansion that ensures adequate penetration. You won't get the .600 to .625" expansion of the Gold Dots, you'll get expansion in the .450 to .475" range like you do with the 158 gr LSWCHP FBI load, and you'll get similar 14" penetration.

My preferred .38 +P self defense load is:
125 gr XTP with 7.5 grains of IMR 800X (.38+P maximum load, Hornady 9th edition).

It gives an average velocity of 951 fps with a Standard Deviation around 20 fps in a Model 60 with a 2 1/8" barrel. The velocity in a 1 7/8" Model 36 is a slightly slower 929 fps.

---

The issue of the possible legal issues of using hand loads in self defense cases is as over blown as the lock issue as there is no case that has ever resulted in a conviction due to the use of hand loads. It's either a good shoot or it's not.

The issue of hand loads did arise in one case where Massad Ayoob was called as a professional witness - but the forensics issue in
that case involved hand loading in general as the wife of the accused shot her self with a target load. The police mistakenly confiscated a sample of more powerfully loaded ammo. The lack of powder burns and stippling on the deceased with the lighter load that would have occurred with the heavier load led to the erroneous conclusion that she was shot at longer range and could not have killed herself.

The moral of that case is however not "don't use hand loads for self defense" it is instead:

1. be sure to clearly label your self defense loads as your self defense loads,
2. only use loads out of that clearly marked box,
3. keep that box separate from your other ammunition where you can direct the police to the right box with no confusion, and
4. always leave a few rounds in the ox for test purposes.

That advice applies to any self defense ammo, not just hand loaded self defense ammo.


The other concerns about hand loads involve forensics for crime solving purposes as an examiner/investigator can reference a data base for commercial rounds to help determine things like the brand/round used, the published velocity, etc to help flesh out what happened at the crime scene.

That's important in solving a crime where the shooter isn't known, but it's not an issue in a self defense shoot where who did the shooting isn't in doubt and where you have a sample of ammo (see 1-4 above) that can be tested in your gun to confirm your account of events and verify the facts in the shoot.

Last edited by BB57; 07-14-2016 at 12:46 PM.
Reply With Quote
The Following 4 Users Like Post:
  #8  
Old 07-14-2016, 10:08 AM
gnystrom gnystrom is offline
Member
New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions  
Join Date: Oct 2009
Location: MN
Posts: 1,833
Likes: 1,062
Liked 2,109 Times in 860 Posts
Default

As an instructor that had seen dozens of people with your same question/issues. First off you made a good choice in a firearm.

Key words, new gun+wife= need common sense.

1. Screwing with the "lock" is insanity in my opinion. Leave it alone and you will be fine.

2. Try and find some 148 gr. wadcutters to start her out with. They have little recoil and they may prevent her from flinching even worse than she will anyway.

3. Wadcutters can be used for a carry load. There are better options, but putting rounds on target is her first priority.

4. A reasonable carry load would be Speer Gold Dot 135gr. short barrel. Don't worry about the +P part. After practice, and in a SD situation, first shot recoil will be the last of her problems.

5. I have my students shoot the gun single action until they are very comfortable with the recoil. Then go home and with a UNLOADED firearm, dry fire double action until their finger is strong enough to make shooting that gun double action only is second nature.

6. I would definitely invest in a set of Crimson Trace Lasergrips. I find women like the LG305's. That dot will definitely teach her trigger control and in a panic situation, it takes using the sights on your gun out of the equation. Their website will have great videos. Now, she can really put that dry fire practice/trigger control to good use.

7. If you plan on shooting the shorter 38 specials, make sure you thoroughly clean the chambers so you still have the option of using (not a great idea) the .357 rounds if you choose. (that will really help develop a flinch). In fact, I would clean the gun after each use to make things easier. Especially if you are using lead bullets.

8. Practice and more practice. Hopefully with another experienced shooter that can help. Las Vegas has a lot of ranges and any money you spend on instruction would be well spent.

You did good and I wish you and your wife the best. Sorry for the long post but new shooters are my passion.
Reply With Quote
The Following 5 Users Like Post:
  #9  
Old 07-14-2016, 10:15 AM
Muss Muggins's Avatar
Muss Muggins Muss Muggins is online now
Member
New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions  
Join Date: Mar 2014
Location: bootheel of Missouri
Posts: 16,853
Likes: 6,981
Liked 28,083 Times in 8,897 Posts
Default

I'm not as detail oriented as some of the other fellas here.

Leave the lock alone, shoot whatever ammo you feel comfortable with because you ain't gonna hurt that pistol, and any name brand hollowpoint self defense ammo will do the job you need it to do, so long as you can put a couple in the ten ring when you have to.

Oh, and enjoy. That 60 is a right fine pistol . . . .
__________________
Wisdom comes thru fear . . .
Reply With Quote
The Following 2 Users Like Post:
  #10  
Old 07-14-2016, 12:01 PM
Rebelfan Rebelfan is offline
Member
New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions  
Join Date: Jul 2016
Location: Las Vegas
Posts: 2
Likes: 6
Liked 0 Times in 0 Posts
Default

Thanks to all for the quick responses and info. Good to hear that the 'lock issue' appears to have been overblown.

The Gold-Dot seems to have consistent results in gel testing. I guess the ammo 'debate' here is no different than the 'Cold Air Intake' debate on car and truck forums.

Next on the list is a 686.
Reply With Quote
  #11  
Old 07-14-2016, 12:32 PM
Bill In Texas Bill In Texas is offline
Member
New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions  
Join Date: Jan 2016
Location: Home is Texas.
Posts: 2,769
Likes: 3,402
Liked 1,402 Times in 843 Posts
Default

Welcome to the forum! I have the 60 Pro Model with the 3" barrel.
It's my EDC most days. I like to use the Speer Short Barrel .38 Special +p's as my self defense round and shoot whatever is the cheapest practice fmj ammo I can buy in any weight, even though I prefer 158 grain if I can get it at a reasonable price.

Check all the screws on the 60 for tightness, including the screw that holds the cylinder release. If you find they loosen up to regularly, a little clear nail polish will help! Hope y'all enjoy the new gun!
Reply With Quote
The Following User Likes This Post:
  #12  
Old 07-14-2016, 01:17 PM
gwpercle's Avatar
gwpercle gwpercle is online now
Member
New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions  
Join Date: Nov 2011
Location: Baton Rouge, La.
Posts: 6,838
Likes: 7,393
Liked 8,046 Times in 3,652 Posts
Default

The lock thing....I own 3 with locks and 3 without locks ,I do a lot of shooting with them, never had a lock engage itself or tie up the gun !
I have owned and carried a S&W model 637 in 38 special +P for the past ten years, I shoot it often, if I had any problems with the lock it wouldn't be in my pocket right now !

10 years shooting and carrying...never a problem.

Gary
Reply With Quote
  #13  
Old 07-14-2016, 01:50 PM
gboling's Avatar
gboling gboling is offline
Member
New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions  
Join Date: Aug 2008
Location: S/W Texas
Posts: 638
Likes: 261
Liked 232 Times in 132 Posts
Default

You cannot go wrong with what your local police use. In Los Angeles it is the.38 Speer 135 grain +P.
Reply With Quote
  #14  
Old 07-14-2016, 02:52 PM
AZretired's Avatar
AZretired AZretired is offline
Member
New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions  
Join Date: Jul 2006
Location: New Mexico & Arizona
Posts: 1,630
Likes: 735
Liked 1,460 Times in 644 Posts
Default

I taught my wife too shoot 40 years ago with my off duty weapon, a bobbed M-60 with Pachmayr Compacs on it. We used wadcutters and my wife learned well. Nowadays she prefers my M-64 snubby.
As a side note I put 100-150 rounds of Federal +P LSWCHP per year through that gun for 20 years with no issues. Traded it off for a M -640. Love the 640/642 but wish I still had a 60.

Sent from my BNTV400 using Tapatalk
__________________
Support your Police, & NRA
Reply With Quote
  #15  
Old 07-14-2016, 03:02 PM
TAC TAC is offline
Member
New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions  
Join Date: Apr 2007
Location: S.E. Michigan
Posts: 832
Likes: 283
Liked 506 Times in 265 Posts
Default

Quote:
Originally Posted by gnystrom View Post
As an instructor that had seen dozens of people with your same question/issues. First off you made a good choice in a firearm.

Key words, new gun+wife= need common sense.

1. Screwing with the "lock" is insanity in my opinion. Leave it alone and you will be fine.

2. Try and find some 148 gr. wadcutters to start her out with. They have little recoil and they may prevent her from flinching even worse than she will anyway.

3. Wadcutters can be used for a carry load. There are better options, but putting rounds on target is her first priority.

4. A reasonable carry load would be Speer Gold Dot 135gr. short barrel. Don't worry about the +P part. After practice, and in a SD situation, first shot recoil will be the last of her problems.

5. I have my students shoot the gun single action until they are very comfortable with the recoil. Then go home and with a UNLOADED firearm, dry fire double action until their finger is strong enough to make shooting that gun double action only is second nature.

6. I would definitely invest in a set of Crimson Trace Lasergrips. I find women like the LG305's. That dot will definitely teach her trigger control and in a panic situation, it takes using the sights on your gun out of the equation. Their website will have great videos. Now, she can really put that dry fire practice/trigger control to good use.

7. If you plan on shooting the shorter 38 specials, make sure you thoroughly clean the chambers so you still have the option of using (not a great idea) the .357 rounds if you choose. (that will really help develop a flinch). In fact, I would clean the gun after each use to make things easier. Especially if you are using lead bullets.

8. Practice and more practice. Hopefully with another experienced shooter that can help. Las Vegas has a lot of ranges and any money you spend on instruction would be well spent.

You did good and I wish you and your wife the best. Sorry for the long post but new shooters are my passion.
I agree with #1-8, with the exception of #6. Not a fan of laser grips, but that too, had been debated as much as the internal lock.

Last edited by TAC; 07-15-2016 at 06:27 PM.
Reply With Quote
The Following 2 Users Like Post:
  #16  
Old 07-14-2016, 04:00 PM
gnystrom gnystrom is offline
Member
New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions  
Join Date: Oct 2009
Location: MN
Posts: 1,833
Likes: 1,062
Liked 2,109 Times in 860 Posts
Default

Quote:
Originally Posted by TAC View Post
I agree with #1-8, with the exception of #6. Not a fan of laser grips, but that too, hads been debated as much as the internal lock.
You have to admit lasergrips are great for learning trigger control and they do have an "off" switch for the purists out there.
I once had to shoot offhand from cover with no possibility of using the gun sights. As you can see below, I learned a lot from that exercise.


Last edited by gnystrom; 07-14-2016 at 04:02 PM.
Reply With Quote
The Following User Likes This Post:
  #17  
Old 07-14-2016, 06:28 PM
sherco sherco is offline
Member
New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions  
Join Date: Jul 2009
Posts: 20
Likes: 0
Liked 1 Time in 1 Post
Default

I'm old. I've been shooting my whole life, including really big handguns in calibers starting with a 4.
The most painful handgun ever was a j frame with wood grips with a hot .357 load. It was nasty.
Reply With Quote
  #18  
Old 07-14-2016, 07:10 PM
rt11002003 rt11002003 is offline
Member
New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions  
Join Date: Aug 2014
Posts: 24
Likes: 8
Liked 14 Times in 10 Posts
Default

Nice gun! I'm also old. And, like "sherco" I've shot some nasty loads; the worst was .44 magnum. The idea is to hit what you're shooting at (and nothing else), so I tend to go with any stock loads that produce minimum recoil. Heavier projectiles with stock powder load tend to minimize recoil. Any good hollow point, expandable round is likely to do the job for SD/HD. The objective is to produce shock to stop the aggressor and keep the bullet fragments (or entire round) from hitting anything/anyone else, other than the target.

I don't have a Model 60, but do have a couple of revolvers with 4 inch barrels that handle both .38 Special and .357 Magnum. For most range practice, I shoot the .38 Special round with occasional sessions with .357 Magnum, so I know what to expect with it.

During a lot of my USAF career, the S&W .38 Special Combat Masterpiece was my duty weapon. I think it was ".38 Special", maybe just .38. That was a long time ago; I retired in 1976. The memory fades. I had a lot of trust in the gun and in the load. But, it was for close in combat use, similar to what one faces in SD/HD. For known serious situations we carried the M16 and a handgun. And, for really serious expected situations, we had a combat team and the M60.

Locks are hardly worth mentioning. Except to say, if you don't use them they're unlikely to cause a problem. A good safe is a better solution.

My best advice is to decide what you want the gun and the round to do. Select what you consider the best of both. And, practice, practice until you can handle the gun as second nature and put the rounds where you want them.

Last edited by rt11002003; 07-14-2016 at 07:13 PM.
Reply With Quote
  #19  
Old 07-14-2016, 07:42 PM
ContinentalOp's Avatar
ContinentalOp ContinentalOp is offline
Member
New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions  
Join Date: Apr 2009
Posts: 6,315
Likes: 13,115
Liked 12,802 Times in 4,228 Posts
Default

+P are fine for the range, but not really necessary for much of your range practice. I do most of my practice with standard pressure 130gr FMJ and maybe 15-20 rounds of +P. While you don't necessarily need to shoot +P every range session, it is a good idea to fire at least a few cylinder-fulls every once in a while to stay familiar with it, assuming you use +P for self-defense loads.

My first choice in self defense ammo is Speer 135gr Short-Barrel Gold Dot +P. It has a good track record. Search around for 50-round boxes as they're much cheaper than the 20-round boxes that are available.

My second choice is Buffalo Bore 158gr LSWCHP standard pressure. From all accounts it performs the same as the "older" FBI loads. The biggest drawback is the price, but revolvers generally don't need as many rounds fired to prove reliability as semi-autos do.

Both those rounds have some kick. For lower-recoiling self defense loads I prefer Federal 125gr Nyclads, but from what I've read they may be hard to come by. If I were to pick a standard pressure self-defense load now I would probably check out Winchester's 130gr Defend JHP.

I prefer medium- to heavy-weight hollowpoint bullets for self defense (in .38 Special I would consider that as 125gr and heavier) but there are lighter loads that may work if recoil is an issue. The most important things in self defense ammo are reliability and shootability. I'd suggest trying the "good stuff," but if it doesn't work for you or your wife don't be afraid to try something else. The only loads I would recommend staying away from are the frangible loads, like Glaser Safety Slugs or MagSafe. I don't trust their lack of penetration, their extremely light weight can affect POA/POI, and I think they're too expensive for what they offer.

For maintenance tips, the resource I like is Grant Cunningham's Gun Digest Book of the Revolver. It also has lots of tips on handling and shooting revolvers. I think it's well worth the price.

Internal locks are always a contentious issue here. My opinion, for what it's worth, is that I won't use an internal lock gun for self defense. While rare, there have been documented instances of revolvers failing to fire. If my only option was to get a gun with the internal lock, I'd remove it as soon as possible. I'm sure plenty of people will disagree with me. You can do what you want regarding the lock.

Also, as a piece of general advice, I usually recommend Ed Lovett's book, The Snubby Revolver for owners of snub revolvers. He has lots of good advice, tips, and knowledge. The only section I disagree with him is where he recommends exotic ammo. Other than that, I think it's a great resource.
Reply With Quote
  #20  
Old 07-14-2016, 08:03 PM
oldnavynukespook's Avatar
oldnavynukespook oldnavynukespook is offline
US Veteran
New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions  
Join Date: Dec 2008
Location: NC
Posts: 57
Likes: 5
Liked 40 Times in 17 Posts
Default

Agree with gnystrom on all points. The Crimson Trace are excellent for training and, as we say in the Navy, when in "the jaws of extremis". Whatever helps you hit the target, especially when under stress, is o.k. in my book. Wadcutters are hard to find these days. Seems semi-wads are somewhat more plentiful. Recommend Birchwood-Casey Lead Removal cloth for cleaning up cylinder face and forcing cone. Just use scissors and cut a 1-inch square for each cleaning.
__________________
NRA Life Benefactor,Life NCGCA

Last edited by oldnavynukespook; 07-14-2016 at 08:04 PM.
Reply With Quote
  #21  
Old 07-14-2016, 08:13 PM
wrangler5 wrangler5 is offline
Member
New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions New Member & Model-60 Owner With A Couple Questions  
Join Date: Mar 2011
Location: Missouri
Posts: 1,300
Likes: 4
Liked 1,023 Times in 510 Posts
Default

Quote:
Originally Posted by Green Frog View Post
Old cop,

I like what you said here but wonder, is there a current source for the old FBI load you mention? < snip>
I believe the Remington +P 158g LSWHP load is supposed to be close to what the FBI load was. Rem currently calls it "HTP" ammo, and unlike much of the fancy defensive ammo it's available in boxes of 50.

In my experience with my guns, the Buffalo Bore 158g standard pressure load with the same bullet makes exactly the same velocity as the Remington. (It also gives about the same recoil - BB may be wizards when it comes to pressures, but they can't fix that physics thing about mass and velocity and equal and opposite.) So the BB load would be an alternative for those worried about +P pressures in older guns.
Reply With Quote
The Following User Likes This Post:
  #22  
Old 07-14-2016, 08:55 PM
didactic didactic is offline
Member
New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions  
Join Date: Jun 2012
Location: Texas
Posts: 19
Likes: 5
Liked 18 Times in 8 Posts
Default

Quote:
Originally Posted by gnystrom View Post

7. If you plan on shooting the shorter 38 specials, make sure you thoroughly clean the chambers so you still have the option of using (not a great idea) the .357 rounds if you choose. (that will really help develop a flinch). In fact, I would clean the gun after each use to make things easier. Especially if you are using lead bullets.

8. Practice and more practice. Hopefully with another experienced shooter that can help. Las Vegas has a lot of ranges and any money you spend on instruction would be well spent.

You did good and I wish you and your wife the best. Sorry for the long post but new shooters are my passion.
Re point #7 above: You might be told that shooting .38 Specials in the longer .357 Magnum chambers will eventually etch or erode a ring into the chamber, that will give you trouble if/when you shoot .357's. I've never seen this. What I HAVE seen is a ridge of fouling building up in the chambers at the case mouth point, after firing a LOT of .38's, that a casual cleaning won't remove. If that happens, .357's will be hard or even impossible to load, and/or hard to eject after firing. If this happens, the solution is simple: solvent and a bronze brush when cleaning, with careful visual inspection afterwards.

Agree with all the others, a fine little shootin' iron.
Reply With Quote
The Following 2 Users Like Post:
  #23  
Old 07-14-2016, 11:26 PM
S&W SS Revolvers S&W SS Revolvers is offline
Member
New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions  
Join Date: Oct 2014
Location: Colorado (unfortunately)
Posts: 379
Likes: 731
Liked 222 Times in 128 Posts
Default

Quote:
Originally Posted by Rebelfan View Post
Thanks to all for the quick responses and info. Good to hear that the 'lock issue' appears to have been overblown.

The Gold-Dot seems to have consistent results in gel testing. I guess the ammo 'debate' here is no different than the 'Cold Air Intake' debate on car and truck forums.

Next on the list is a 686.
Ahhh...686 music t my ears...they are sooooooo sweet!!!
__________________
S&W SS Revolvers
Reply With Quote
  #24  
Old 07-14-2016, 11:47 PM
S&W SS Revolvers S&W SS Revolvers is offline
Member
New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions  
Join Date: Oct 2014
Location: Colorado (unfortunately)
Posts: 379
Likes: 731
Liked 222 Times in 128 Posts
Default

I haven't 10% of the shooting experience many here do and dad started me at 3 in uhhhh 1964 with his old .22 Ruger Single Six thats locked up downstairs. BTW my grandsons started with it 2 months ago (and it works flawlessly with a probable 70000 + rounds). With that said the .38 and moreso the .357 are now and likely will be the most favorite calibers ever for me.

Now my wife...is a Rock Star with a 9MM semi auto. She says the revolver is antiquainted...well so am I and she's only 5 years younger. Is she a millenial? LOL!!! Please , someone say yes...

God Bless our Freedom; Forever , Amen...
__________________
S&W SS Revolvers
Reply With Quote
  #25  
Old 07-15-2016, 06:51 AM
sckothmann sckothmann is offline
Member
New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions  
Join Date: Mar 2013
Location: Central Texas
Posts: 12
Likes: 20
Liked 3 Times in 2 Posts
Default Good little Smith

Bought one of these for my wife back in 1997. I have to say it is one of the sweetest little revolvers she or I have ever fired. Good trigger, especially in the single action mode.

I would stay with the .38 Special loads for practice. Firing a full power .357 load thru the Model 60 is, at best, uncomfortable, and staying on target with it takes a LOT of practice. My wife is small, with small hands, and she definitely cannot handle a full power .357 round. With the .38 SPL stuff, she hits consistently where she is aiming, and isn't afraid of the gun.

So have fun!! The Model 60 is fun to shoot, easy to handle, and easy to conceal.
Reply With Quote
  #26  
Old 07-15-2016, 07:28 AM
Pointblank2U's Avatar
Pointblank2U Pointblank2U is offline
US Veteran
New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions  
Join Date: Jun 2005
Location: Ohio
Posts: 641
Likes: 51
Liked 1,175 Times in 318 Posts
Default

http://hipowersandhandguns.com/38%20...mmo%20Test.htm
__________________
Loyalty Above All.. but Honor
Reply With Quote
  #27  
Old 07-15-2016, 09:40 AM
BB57's Avatar
BB57 BB57 is offline
Member
New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions  
Join Date: Feb 2015
Location: NC
Posts: 4,710
Likes: 3,527
Liked 12,554 Times in 3,342 Posts
Default

Quote:
Originally Posted by gnystrom View Post
.../
/...
6. I would definitely invest in a set of Crimson Trace Lasergrips. I find women like the LG305's. That dot will definitely teach her trigger control and in a panic situation, it takes using the sights on your gun out of the equation. Their website will have great videos. Now, she can really put that dry fire practice/trigger control to good use.

7. If you plan on shooting the shorter 38 specials, make sure you thoroughly clean the chambers so you still have the option of using (not a great idea) the .357 rounds if you choose. (that will really help develop a flinch). In fact, I would clean the gun after each use to make things easier. Especially if you are using lead bullets.

8. Practice and more practice. Hopefully with another experienced shooter that can help. Las Vegas has a lot of ranges and any money you spend on instruction would be well spent.
Great post.

I frequently here people exclaiming that shooting .38 specials in a .357 will result in a carbon ring that prevents you from inserting a .357 magnum cartridge. That's very true - but only for folks who don't clean their revolvers nearly enough. I put about 200 rounds per session of .38 special through whatever .357 Mag revolver I'm carrying at the time and after years of this I have yet to encounter anything other than an incipient carbon ring if for some reason I skipped cleaning after a range session. Even then after 400 rounds, a little powder solvent and a bronze bore brush cleans it right out. I have no idea how many rounds it takes to get a serious carbon ring formed, but it's obviously a lot.

Practice is the key, particularly with a J-frame revolver, and my advise to a new shooter is to get some instruction or at least mentoring from a shooter who is not just experienced, but also knows what he or she is doing and understands shooting a J-frame in depth (although to be honest the same applies to instructors).

I don't personally agree with the laser grip suggestion. Lasers can be a great instructional tool, but if not used very carefully they get the student focusing on the wrong things and can be detrimental to learning the fundamentals - like sight alignment and a proper and consistent grip.
Reply With Quote
The Following User Likes This Post:
  #28  
Old 07-15-2016, 12:32 PM
Tom_R's Avatar
Tom_R Tom_R is offline
Member
New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions  
Join Date: Jun 2013
Location: Connecticut
Posts: 2,024
Likes: 616
Liked 2,433 Times in 873 Posts
Default

If your wife is a new shooter, then skip +p anything or magnums for now.

Get her used to shooting mild factory loads, and for carry, get her regular pressure hollow points and you will be good.

Once she shoots a lot test out +p and maybe a cylinder full of magnums if she feels particularly adventurous that day.
Reply With Quote
The Following User Likes This Post:
  #29  
Old 07-15-2016, 12:59 PM
thebreaze thebreaze is offline
Member
New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions  
Join Date: Oct 2009
Location: Spring, Texas
Posts: 27
Likes: 0
Liked 1 Time in 1 Post
Default

It's been a long time since I have posted anything,because usually anything I have to say has been said by the others and probably better!!

Any way...I agree on the Crimson Trace grips. As I am now older and have found difficulty seeing both the front sight and target at the same time, I needed to try something else.
I now have no problem hitting the 10 ring.

What I have noticed is that no one has mentioned Ruger ARX or PolyCase ammo. I really do like this ammo. It's still fairly new to the ammo market and .38 spec. can be a pain to find. It is a high velocity low recoil 77 grain defensive round and will be more comfortable in a J Frame. However I would still practice with the cheapest old .38 you can find.
There is a lot of info and videos on the ARX or PolyCase, so do your own research and decide. It really does come down to what works best for you.

Good Luck and God Speed
Reply With Quote
  #30  
Old 07-15-2016, 01:06 PM
TAC TAC is offline
Member
New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions  
Join Date: Apr 2007
Location: S.E. Michigan
Posts: 832
Likes: 283
Liked 506 Times in 265 Posts
Default

I practice using point shooting a lot. In many self defense shooting situations, they're likely to be up close and personal, and you don't even want to take the time to use sights, let alone, play with a laser. Point shooting can be very effective, and lightning fast!
Reply With Quote
  #31  
Old 07-15-2016, 03:43 PM
Taj's Avatar
Taj Taj is offline
SWCA Member
New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions  
Join Date: Jan 2013
Location: Idaho
Posts: 178
Likes: 17
Liked 425 Times in 134 Posts
Default

Rebelfan,
+p ammo is soon going to be a thing of the past. I do FBI protocol ballistic shoots for a major ammo maker. I do them for potential LE customers and have have done a bunch. Ballistic engineers have done a great job on bullet design in the last few years. Velocity isn't nearly important these days because bullets are designed to perform at standard velocities. Penetration, which is second only to shot placement, is being achieved (15-18 inches) with expansion of at least 1.5x bullet diameter. We've always used high velocities to get bullets to perform but the downside is recoil and muzzle blast, which, by the way, generally reduces our ability for followup shots and shot placement. Shoot a heavier bullet (147-158 grain), designed for defense, from a big name ammo maker, and you will have the best performance you can get from a handgun cartridge. Heck, we even see 15-16 inches of penetration in ballistic "jello" from 148 grain wadcutters. I'm not recommending them for defense, but the last dead guy I saw in my career in law enforcement was hit three times with them and was DRT,(dead right there) with 2 of those bullets resting just under the skin, opposite the entry. Shoot a lot, get trained, and put them where they can do the most "good".

Taj
Reply With Quote
  #32  
Old 07-15-2016, 03:55 PM
Taj's Avatar
Taj Taj is offline
SWCA Member
New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions  
Join Date: Jan 2013
Location: Idaho
Posts: 178
Likes: 17
Liked 425 Times in 134 Posts
Default

Quote:
Originally Posted by TAC View Post
I practice using point shooting a lot. In many self defense shooting situations, they're likely to be up close and personal, and you don't even want to take the time to use sights, let alone, play with a laser. Point shooting can be very effective, and lightning fast!
TAC

The fastest shooters in the world use sights. "Point shooting" in a defensive shooting will get you killed. Train to use the sights and you will always use them, even if it's a rudimentary sight picture. It's been proven many times, that it takes no longer to line up sights, than it takes to make a conscious decision to pull a trigger. The good makers at S&W saw fit to put sights on that revolver. Not using them would be hard to justify in court if you miss and hit the wrong person, and these are things we have to always be cognoscente of. I trained LE for 40 years feel is always prudent to get that handgun between your face and the target because you can't miss fast enough to win a gunfight.

Taj
Reply With Quote
The Following User Likes This Post:
  #33  
Old 09-10-2016, 04:25 PM
Muss Muggins's Avatar
Muss Muggins Muss Muggins is online now
Member
New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions  
Join Date: Mar 2014
Location: bootheel of Missouri
Posts: 16,853
Likes: 6,981
Liked 28,083 Times in 8,897 Posts
Default

Quote:
Originally Posted by Taj View Post
. . . I trained LE for 40 years feel is always prudent to get that handgun between your face and the target because you can't miss fast enough to win a gunfight.

Taj
But you can certainly miss slow enough to lose one . . .
__________________
Wisdom comes thru fear . . .
Reply With Quote
  #34  
Old 09-10-2016, 05:47 PM
Green Frog Green Frog is online now
Member
New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions  
Join Date: Jul 2010
Location: Central VA
Posts: 8,596
Likes: 1,551
Liked 9,320 Times in 4,181 Posts
Default

JMHO based on about 45 years or so of shooting and gun maintenance, but I honestly feel like the whole "ring in the chamber" thing has been blown out of proportion. With thousands of rounds of corrosive primed 22 shorts in a soft steel barrel, yes, but with modern ammo in round counts in the hundreds or low thousands in a modern barrel or cylinder, I surely wouldn't worry! I regularly mix rounds in 32 S&W Long and 327 Fed Mag in my "Project 616" chambers, and I surely wouldn't risk that if I thought there was a likelihood of damage. Enjoy the flexibility of multiple cartridge lengths and powers and use a little judicious cleaning and you should be fine.

Froggie
Reply With Quote
  #35  
Old 09-10-2016, 06:53 PM
wrangler5 wrangler5 is offline
Member
New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions  
Join Date: Mar 2011
Location: Missouri
Posts: 1,300
Likes: 4
Liked 1,023 Times in 510 Posts
Default

Using a laser grip is not "point shooting." You are aiming precisely, using a device that puts a single aiming point ON the target rather than requiring proper alignment of two aiming points with the desired spot on the target. Similar to the way a parallax free scope eliminates alignment errors by placing the reticle and aim point on the same plane.

The benefit of the laser grip (CT style, where the laser comes on just by gripping the gun) is that you can do that precise shot placement before the gun gets up to eye level. The one time I've used a laser grip in a match (BUG match, IDPA-type scenarios) it took me a couple of stages to really focus on the red dot instead of the sights, but after that I was getting shots off before the gun got up to eye level, and they were going exactly where intended. I became noticeably faster as the match went on as I got used to using the red dot.

On the cleaning of chambers in my 357s that shoot a lot of 38s - I've found that a 40 caliber bronze brush is much more effective for cleaning the residue out of chambers than one marked for 38/357. The latter are fine for barrels, but the larger brush does a better job on chamber walls.
Reply With Quote
  #36  
Old 09-10-2016, 09:51 PM
Stephanie B's Avatar
Stephanie B Stephanie B is offline
Member
New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions New Member &amp; Model-60 Owner With A Couple Questions  
Join Date: Nov 2012
Location: SE CT
Posts: 826
Likes: 310
Liked 1,195 Times in 363 Posts
Default

Quote:
Originally Posted by gnystrom View Post
6. I would definitely invest in a set of Crimson Trace Lasergrips. I find women like the LG305's. That dot will definitely teach her trigger control and in a panic situation, it takes using the sights on your gun out of the equation.
+1 on this, especially in a dimly-lit situation. A very good friend has a 3" 60 with 305s. They really do help.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
New S&W 4566TSW Owner - Couple Questions MS88 Smith & Wesson Semi-Auto Pistols 49 03-19-2017 11:18 AM
First handgun, new SD40VE owner, couple questions: Trinads Smith & Wesson SD & Sigma Pistols 14 12-21-2015 08:25 AM
New M&P owner here, couple of questions draftstone Smith & Wesson M&P Pistols 6 06-18-2015 10:18 PM
New SD9VE owner... a couple of questions Henry Killinger Smith & Wesson SD & Sigma Pistols 15 06-21-2013 01:28 AM
New Owner with a couple questions. Coots Smith & Wesson M&P 15-22 7 02-27-2011 05:43 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 01:20 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)