S&W Model 60-15 Rear Windage Screw Question

[Bwalls1]

Hello,
I have a model 60-15 revolver made in 2010. Does anyone have a schematic / parts for this dash 15 version? I need a rear sight windage screw and understand there may be two versions for the J frame. One has a head diameter of .217" but mine measures .185". I ordered a screw (part number 7162) from MidwayUSA but cannot determine the screw head diameter. I have not received the screw yet. Please advise if a schematic / parts is available for the 60-15, and how could I get a copy

Thanks,
Bill Walls

[armorer951]

I don't believe there is a schematic available for that individual model, and S&W no longer produces and disseminates drawings of their firearms as they have in the past. Numrich and Brownells both show schematics on their web sites , but they are not all model, or dash number specific.

If the one you ordered turns out not to be correct, (you will likely need a new windage nut as well) the best way to find the correct screw would be to contact S&W parts directly and check with them. Have your serial number ready for the Customer Service rep when you call. 1-800-331-0852

Numrich has the rear sight assembly, so they may also have the small screw and nut you need if you would rather call them.