I'd like to find a 2" kit gun in 22lr.

Nickel would be best, but I'd go for blue or stainless.

Another would be a Model 30-1 in Nickel.

An interesting N frame, maybe a .41 this time.

Long tube 14 or 17.

__________________
Psalm 27:2

A nice 586, 6" for me. I have a few nice 44's. I think 2018 will be a good year for 38/357 caliber.

Either a 629 or a 28 with a 6" barrel. Also a distant 3rd would be a 25 with the cylinder cut for moon clips so I can load 45colt and 45acp

A s&w 681 With The Ohio State Highway Patrol Stamped Sideplate

The ones I don't have.

__________________
Dave Brown
SWCA #3279

25-7, 29-2 in 8 3/8, CZ pre-75, CZ 75B brushed chrome, VP-9 in blue gray, Bergara Elite 6.5 Creedmoor.....just dreaming on

500 magnum.....been telling myself there is really no good reason to have one but this year I am going to convince myself to get one.

New production .45 Luger. Trouble is I also need the $5,800 to pay for it. And to live in another state so I could legally buy it.

I like to shoot revolvers and own or have owned more "J", "K", and "L" frames than I can mention...but never owned or shot an "N"frame of any caliber. I would like a model 28 or 628 to shoot and simply experiment


Sent from my iPad using Tapatalk

2.5" model 66 (old stuff).

__________________
"lets be careful out there"

I want to pick up a good condition Model 042.

Also, wouldn't mind a 3" Detective Special with a shrouded ejector rod or Colt Viper.

I need to get the Man With No Name conversion gun from Cimarron. with the snake of course.

A pinto Model 50 (or 36 Target).

A first-year Model 58.

A first-year Model 13-1.

I'll likely end up with a few others and none of these before this day next year! It's nice to have a dream.

__________________
Wrangler of stray Chiefs
Bob

A 4" M29 or M27.

The same one I always want, a Model 27...

__________________
Join the NRA today

I've got to slow down a bit this year due to some increased life expenses. That said, It's a safe bet I'll end up getting:

S&W 625 JM (PC? Not sure)
S&W 627 PC
S&W M14
S&W M21

Stuff I always keep an eye out for a good price on:
M10/M13/M15/M19 Snubbies
I frames
cheap used Keltec P11 (what can I say...)
shooter grade M27/M28

Just this 'un. A Model 27-2 with an S-prefixed style barrel originally installed on the gun at the factory.

__________________
Five screws and 3-1/2 inches.

My obsession at the moment is finding a model 19-2 -3 or -4 with 3Ts in 99% to NIB condition. They're out there but I'm chasing my tail trying to find one for a reasonable $. The thrill is in the hunt, right? lol

Today I will be picking up a S&W JR 625 .45 ACP 4" revolver.

__________________
Life is short,live it fully.

In the summer, I might try and nail down a 625 (45 ACP) pre-lock with a 5" barrel.

Sent from my SAMSUNG-SM-G890A using Tapatalk

S&W 625 PC... Had a pre lock 625 5" Barrel years ago and sold it.
Would have kept it if these new de-mooners were available..

__________________
NRA Benefactor

17-6 6”. Going to have to start saving my pennies.

__________________
1SG, USA (Ret)

Nice pre-war Hi Power. Been looking for several years

__________________
John

A 4" 629 no dash with box etc and a 686-4 3" Lew Horton.

Mine's easy. Couple more 442's for the family and an M&P15 Sport or Sport II for me, plus anything that catches my eye with cash in my pocket . . .

__________________
Wisdom comes thru fear . . .

I've already started stashing funds away for a pre-27 3 1/2 inch and hope to put all other temptations aside until I fine one.

CZ75D Compact @ a lgs.

I've been lusting after
1) Model 27 Classic series (4 inch)
2) Model 29 Classic series (4 inch)
3) S&W 1911 Performance Center Commander Bobtail

Nothing that comes to mind instantly. I'm very conservative when it comes to buying guns. The "why" always comes to mind so I'm not sure exactly what I'd want. The new

-Hudson H9 comes to mind. Very innovative, slightly different pistol. Unfortunately it's pricey at $1200 so I don't think that's going to happen in 2018 unless I find one at 1/2 price.

- A few collection pieces I wouldn't mind picking up. Nothing awe inspiring but still. Wouldn't mind having my Polish P64 back along with a P83, maybe a nice Makarov.

- some surplus rifles like a Mauser 8mm since I already have a Enfield and Mosin this would round of the big 3 bolt action guns of WW2. Maybe a Swiss Mauser.

- in the highly unlikely category.... along with the Hudson H9....the US M1903 and M1917, M1 Carbine. SW M27.

Probably things I haven't thought of.

Just throwing stuff out there. There isn't any one specific thing that I have my heart set on

Sent from my XT1650 using Tapatalk

Ruger Blackhawk or Super Blackhawk in 44 mag. Stainless preferred. I have a 29-5 and a Redhawk.

__________________
Just hanging with my dogs

I looked this up. Interesting concept. I'd like to pull the trigger a couple times on one to see if they got it done . . .

__________________
Wisdom comes thru fear . . .

A blued 19-2 snubbie produced in 1961.

__________________
USS Brewton FF1086
SWCA#3597

After I clear afew things out id like to find a 2.5 inch 19 or 66
And 3 inch 65LS.
No safe queens these would be carry guns!

Over the last few years I’ve been blessed with the acquisition of several of my dream guns and in 2017 was able to find the barrel,donor gun and other parts to have a gunsmith duplicate the factory Model 14-3 to 16-3 conversion. That should likely be the high point of 2018 when completed. The only other daydreams I have right now would be Model 631 in 32 H&R and a pre-Model 24. Those would make my S&W herd complete!

Happy New Year to all!
Froggie

I've seen a few video interviews with the inventor on Forgotten weapons. One was from last year shot show where they talked about how the idea came about and the other was a look at the gun and the different proof of concept guns they made and what was changed before they got it right. I thought it would be dry and boring but it was very interesting

Sent from my XT1650 using Tapatalk

625-5 5" Classic in .45LC.
Also have my eye on a 38/44 Outdoorsman, c. 1955 in 95%+ with unrelieved diamond targets. Waiting for owner to agree with my offer of $850.

__________________
Memory of Randy Freas-Rimfired

Colt Python.

__________________
Life Member NRA
Acts 2:38-39

Another 1911-A1.

You can't have too many of 'em.

Dillon mini-gun w/pedistal mount for my John Deere.

__________________
S&W Accumulator

3” k-frame 10/13 or 64/65

American made 22 lr revolver. Kinda limits my choices but! Leanin towards something < 5" barrel but will not discount any length @ this time. SA or DA doesn't really matter. Just something to shoot rats with (already have a Mark II target for a squirrel pistola ).

Looking for a 25-3 first then a Model 1955 and a 1950 mil.

Ruger SP101 double action only

You sound like a Model 18 candidate to me. Keep your eyes peeled and your fingers crossed.

__________________
Dave Brown
SWCA #3279

Ruger sp101 chambered in .357 magnum with a 3 inch barrel.

The model 18 is a great 22 revolver.

It would be on my list, except I already have one.

One other gun I'd like to find is a M38 bodyguard to keep my M49 company.

The week after I bought my M49, a local California classified ad site had a ANIB M38 for sale.

I didn't buy it because I just bought the 49 and my bank account was empty.

That was two years ago. Little did I know I'd never see another M38 for sale.

New S&W 610. You can wish, right?

I'll be on the lookout for a couple
1) 29-4 3" unfluted cylinder to complete my 3 gun set mfg in 1989.
2) A nice model 58.

Of course there are always ones that pop up unexpectedly at a good price that you really don't need but talk yourself into buying.

The hunt continues.

Masterbuck54

Ahh, fine choices.
I'm looking for that K frame, 3", with standard-pencil barrel.