On the ones I've seen, that isn't a screw, it's a roll pin pressed in and cut off. Every one I've ever seen was too short to be useful as a trigger stop. You can pull it out and put in another one, cut too long, then work it to length to work correctly. That's what this trigger snob does.
Also, the single and double action have different release points so the trigger stop has to be set to one or the other. I fix that by setting the stop to work for the DA. Then the SA won't work, so I stone the length of the SA part on the trigger shorter until it works too. Then they both work with one trigger stop.
Last edited by Protocall_Design; 04-18-2018 at 01:51 PM.
|