Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Revolvers > S&W Revolvers: 1980 to the Present
o

Notices

S&W Revolvers: 1980 to the Present All NON-PINNED Barrels, the L-Frames, and the New Era Revolvers


Reply
 
Thread Tools Display Modes
  #1  
Old 06-13-2018, 08:24 PM
JimCunn JimCunn is offline
Member
637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm  
Join Date: Jun 2018
Posts: 377
Likes: 133
Liked 375 Times in 162 Posts
Default 637-2 in 9mm

New member, this is my first post.

I recently bought my wife a 637-2 Airweight and put a Titanium .38/.357 cylinder and titanium center pin in it to reduce weight (not to get .357 ability).

Liked it enough that I did another for myself. For the second 637, I got an extra yoke assembly and a third titanium cylinder and had TK bore it for moonclip and 9mm Parabellum.

TK says the modified cylinder will still fire .38+P and .357 with or without moon clips.
The S&W titanium 120gr minimum bullet weight restriction with .357 or 9mm applies.

I have two questions.
1) Would you guys fire an occasional .357 in the unmodified Titanium cylinders (will the 637-2 frame handle it)?
2) Would you attempt .38 and/or .357 in the rechambered cylinder (would the cylinder handle it)?

Thanks
P.S. TK service is great.

Last edited by JimCunn; 06-13-2018 at 09:37 PM.
Reply With Quote
  #2  
Old 06-13-2018, 09:14 PM
Lou_the_welder's Avatar
Lou_the_welder Lou_the_welder is offline
Member
637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm  
Join Date: Aug 2015
Location: Los Angeles,California
Posts: 1,885
Likes: 3,791
Liked 4,094 Times in 1,212 Posts
Default

Kaboom!


Sent from my SM-N950U using Tapatalk
Reply With Quote
The Following 4 Users Like Post:
  #3  
Old 06-13-2018, 09:21 PM
Protocall_Design Protocall_Design is offline
Vendor
637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm  
Join Date: Jan 2010
Location: Kansas City area
Posts: 6,129
Likes: 53,433
Liked 13,435 Times in 4,240 Posts
Default

I would not fire .357 in a gun that light anyway. It hurts. The cylinder might handle it, the frame might not. I don't know for sure. Why take a chance on ruining a nice gun?

Also, it will swell the brass near the base. The 9mm base is a few thousandths larger. This may not be a concern if you don't reload, but the brass would be toast, in my opinion.

I agree, TK Custom is one of the greats.
Reply With Quote
  #4  
Old 06-13-2018, 09:30 PM
dr. mordo's Avatar
dr. mordo dr. mordo is offline
Member
637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm  
Join Date: Jul 2017
Location: Miami, FL
Posts: 1,677
Likes: 5,138
Liked 2,954 Times in 1,021 Posts
Default

In another thread, a gent here talked about his recent manufacture airweight J frame that worked itself loose after about 1000 rounds of 38 +P. I'm guessing it will take far fewer rounds of 357 or 9mm to damage the gun.
Reply With Quote
  #5  
Old 06-13-2018, 09:36 PM
Kernel Crittenden's Avatar
Kernel Crittenden Kernel Crittenden is offline
US Veteran
Absent Comrade
637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm  
Join Date: Apr 2014
Location: The Badger State
Posts: 6,548
Likes: 3,410
Liked 6,481 Times in 3,065 Posts
Default

Quote:
Originally Posted by JimCunn View Post
...1) Would you guys fire an occasional .357 in the unmodified Titanium cylinders (will the 637-2 frame handle it)?...
Only if it had Scandium Alloy Frame and a stainless barrel.
__________________
~ S&W aficionado in training ~
Reply With Quote
The Following User Likes This Post:
  #6  
Old 06-13-2018, 09:36 PM
JimCunn JimCunn is offline
Member
637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm  
Join Date: Jun 2018
Posts: 377
Likes: 133
Liked 375 Times in 162 Posts
Default

"Why take a chance on ruining a nice gun?"
I'm not sentimentally attached to the three 637s I have, and they are cheap enough that I'd just replace the damaged one (assuming my hand survived).

I do reload, but would chunk the few .38/.357 hulls that might ever get fired through it. Would be uneasy about resizing the bases by that much..
Reply With Quote
  #7  
Old 06-13-2018, 09:40 PM
JimCunn JimCunn is offline
Member
637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm  
Join Date: Jun 2018
Posts: 377
Likes: 133
Liked 375 Times in 162 Posts
Default

"Only if it had Scandium Alloy Frame".

It's a 637-2. It doesn't.
It does have a Stainless 1-7/8" barrel.

Last edited by JimCunn; 06-13-2018 at 09:45 PM.
Reply With Quote
  #8  
Old 06-13-2018, 10:10 PM
JimCunn JimCunn is offline
Member
637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm  
Join Date: Jun 2018
Posts: 377
Likes: 133
Liked 375 Times in 162 Posts
Default

As an aside, back in the late 60s, I bought a new .38 round butt Chief's Special for 57 bucks. Put Herrett Shooting Star square butt conversion grips on it. Local Cop liked it and offered to swap for the Chief, a new T-series Browning Hi Power and a box of 9mm. I jumped on that and then went and bought me another $57 Chief and another set of Shooting Stars. I developed a strong attachment to both the Chief and the Hi-Power. The Chief was stolen a couple of years ago (which is why I bought the first 637 as a replacement). I still have the 9mm Hi-Power, and that is the reason I did the 9mm conversion on the 637.

Last edited by JimCunn; 06-13-2018 at 10:14 PM.
Reply With Quote
The Following User Likes This Post:
  #9  
Old 06-13-2018, 11:56 PM
Kernel Crittenden's Avatar
Kernel Crittenden Kernel Crittenden is offline
US Veteran
Absent Comrade
637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm  
Join Date: Apr 2014
Location: The Badger State
Posts: 6,548
Likes: 3,410
Liked 6,481 Times in 3,065 Posts
Default

Quote:
Originally Posted by JimCunn View Post
"Only if it had Scandium Alloy Frame".

It's a 637-2. It doesn't.
It does have a Stainless 1-7/8" barrel.
AFAIK the ONLY alloy J-frames S&W sells that are rated for .357 Magnum have scandium alloy frames, titanium cylinders, and stainless barrels. Hence my answer to the OP's question.
__________________
~ S&W aficionado in training ~
Reply With Quote
The Following 2 Users Like Post:
  #10  
Old 06-14-2018, 01:50 AM
JimCunn JimCunn is offline
Member
637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm  
Join Date: Jun 2018
Posts: 377
Likes: 133
Liked 375 Times in 162 Posts
Default

Yes, I am aware of that, but rated and capable are two different things.
I don't know if the 637 is capable, though a few people have done it before and claim success.
The .357 titanium cylinder is capable, it is the top strap on the frame that concerns me. It would appear that the addition of 0.05% to 0.15% scandium to the aluminum alloy increases the frame strength by about 35%.

Last edited by JimCunn; 06-14-2018 at 02:52 AM.
Reply With Quote
  #11  
Old 06-14-2018, 09:28 AM
CelticSire's Avatar
CelticSire CelticSire is offline
US Veteran
637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm  
Join Date: Apr 2003
Location: Texas, USA
Posts: 1,112
Likes: 1,816
Liked 1,167 Times in 309 Posts
Default

[QUOTE=JimCunn;140067071 (assuming my hand survived)[/QUOTE]

How sentimentally attached are you to your hand?
Reply With Quote
The Following User Likes This Post:
  #12  
Old 06-14-2018, 10:15 AM
THE PILGRIM's Avatar
THE PILGRIM THE PILGRIM is online now
Member
637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm  
Join Date: Mar 2007
Location: ALBUQUERQUE, NM
Posts: 13,846
Likes: 8,067
Liked 25,338 Times in 8,518 Posts
Default

If you want a 357, buy a 357.
Playing around with high pressure rounds in guns not intended for them is dangerous and foolish.
__________________
NRA LIFE MEMBER
Reply With Quote
The Following 4 Users Like Post:
  #13  
Old 06-14-2018, 10:28 AM
Flyingfool Flyingfool is offline
Member
637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm  
Join Date: Nov 2016
Location: Wisconsin
Posts: 542
Likes: 4
Liked 339 Times in 181 Posts
Default

There is extremely little gain of terminal performance between 38+p and 357 mag out of snubbie barrel lengths. A lot more recoil, a lot more noise a lot more abuse to the gun. And very little effective velocity increase and expansion of the bullet.

I agree, if you want a 357 buy a 357. In the same vain, if you want a 9mm, buy a semi-auto or at least a gun made and rated for 9mm.

As for 9mm, Dealing with moon clips is of little advantage except for dropping the spent empties with the short sjecrion rod as the entire combined weight and gravity helps quickly remove the entire cylinder of empties. . Reloading with clips offers less advantage than a traditional speed loader. At least in my opinion.
Reply With Quote
  #14  
Old 06-14-2018, 10:49 AM
THE PILGRIM's Avatar
THE PILGRIM THE PILGRIM is online now
Member
637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm  
Join Date: Mar 2007
Location: ALBUQUERQUE, NM
Posts: 13,846
Likes: 8,067
Liked 25,338 Times in 8,518 Posts
Default

As we have posted a number of times, 357 rounds out of a J Frame are a challenge for most of us.
I can shoot them, but really don’t enjoy it!
So as posted above, most of the time you will find 38+P in my J’s.
Like this one.
Attached Images
File Type: jpg 81B51563-DBFE-42FE-9CB2-4FB9A1E32F46.jpg (57.9 KB, 39 views)
__________________
NRA LIFE MEMBER
Reply With Quote
The Following User Likes This Post:
  #15  
Old 06-14-2018, 10:55 AM
kaaskop49 kaaskop49 is offline
Member
637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm  
Join Date: Jun 2012
Location: Demon-class planet
Posts: 7,404
Likes: 29,169
Liked 8,461 Times in 3,772 Posts
Default

Please also note that the top strap on the lightweight scandium frame mags (340s, 360) is thicker than that of the .38 Spl aluminum frame guns. So much so, that the .357 gun will fit only with difficulty in a IWB suede pouch holster (IME) while the .38 gun fits no problem.

Also note that the .357 Scandium guns are fitted with a (proper term?) blast shield to protect the top strap at the barrel/cylinder gap from erosion by magnum rounds. The .38s do not have this device.

Kaaskop49
Shield #5103
Reply With Quote
The Following 2 Users Like Post:
  #16  
Old 06-14-2018, 11:20 AM
JimCunn JimCunn is offline
Member
637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm  
Join Date: Jun 2018
Posts: 377
Likes: 133
Liked 375 Times in 162 Posts
Default

"If you want a 357, buy a 357".

Well said. As I mentioned earlier, I did the titanium cylinder and center pin for the weight reduction, not to get the magnum chambering. I did the 9mm conversion because the ammunition is significantly cheaper than .38 special, because I have a 9mm Browning Hi-Power, a Kimber Micro 9, and out of curiousity. Re +P, I'm not interested in the extra power, so regular .38 special is adequate for my puposes (using my other, unconverted titanium cylinder). When I want more power, I've always switched to my Super Blackhawk.

I've been using speed strips with my Chief's Special for years. I've already noticed the moon clips are much faster. Perhaps my speed strip technique has been wrong.

Good point about the blast shield.

Last edited by JimCunn; 02-03-2019 at 08:57 PM.
Reply With Quote
  #17  
Old 06-14-2018, 02:58 PM
Kernel Crittenden's Avatar
Kernel Crittenden Kernel Crittenden is offline
US Veteran
Absent Comrade
637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm  
Join Date: Apr 2014
Location: The Badger State
Posts: 6,548
Likes: 3,410
Liked 6,481 Times in 3,065 Posts
Default

Quote:
Originally Posted by JimCunn View Post
… When I want more power, I've always switched to my Super Blackhawk.
That's like going from an electric moped to a turbo diesel Mack truck!
__________________
~ S&W aficionado in training ~
Reply With Quote
  #18  
Old 06-14-2018, 03:45 PM
JimCunn JimCunn is offline
Member
637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm  
Join Date: Jun 2018
Posts: 377
Likes: 133
Liked 375 Times in 162 Posts
Default

Yeah, what I want out of our 637s is small enough to fit in a pocket, and light enough to carry without being a nuisance. They fill that purpose. As an aside, my brother recently used his to scare off a home invader who woke him up in his bed in the wee hours by beating him in the face with a metal bar. Three shots, and my brother says he didn't notice the recoil at all (he deliberately missed all three shots - didn't want to kill anyone). He has the titanium cylinder as well. Lightens the pistol up by a bit over two ounces.

Another aside - I admit a sentimental fondness for the Tom Threepersons open toe holsters.
Reply With Quote
  #19  
Old 06-14-2018, 06:01 PM
shouldazagged shouldazagged is offline
Absent Comrade
637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm  
Join Date: Feb 2013
Location: Louisville, KY, USA
Posts: 19,336
Likes: 53,737
Liked 38,386 Times in 11,801 Posts
Default

Quote:
Originally Posted by JimCunn View Post
...As an aside, my brother recently used his to scare off a home invader who woke him up in his bed in the wee hours by beating him in the face with a metal bar. Three shots, and my brother says he didn't notice the recoil at all (he deliberately missed all three shots - didn't want to kill anyone)...
I mean no disrespect to your brother; but if, heaven forbid, I ever find myself in that kind of situation, I will be forced do my best to make every shot hit the assailant. I don't want to kill anybody either, the thought horrifies me; but I damn sure would have to do all I could to stop a savage attack like that. I have an aversion to being killed or brain damaged.

Sorry for the thread drift, but that image disturbed me.

As for the 9mm conversion, I would much prefer a steel gun made for the round. That wouldn't be because of fearing a kaboom in a lightweight, but would be about control. And, at my age, comfort in practicing.
__________________
Oh well, what the hell.
Reply With Quote
  #20  
Old 06-14-2018, 07:54 PM
JimCunn JimCunn is offline
Member
637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm  
Join Date: Jun 2018
Posts: 377
Likes: 133
Liked 375 Times in 162 Posts
Default

Thread drift doesn't bother me. The guy was running away after the first shot, and you can't legally shoot someone who has disengaged. I'm only 76, and my brother 79, so we haven't reached the age where we are recoil sensitive yet.

My Dad was killed in a robbery of his store when he was 86, on a day when he wasn't carrying his guns. He wasn't recoil sensitive either.

Re the conversion, it takes less than two minutes to swap out the cylinder and yoke to my other, stock titanium cylinder and stainless yoke when I want to shoot .38 Special, so no big deal there.

Last edited by JimCunn; 06-14-2018 at 08:49 PM.
Reply With Quote
  #21  
Old 06-17-2018, 04:51 PM
Practical Practical is offline
Member
637-2 in 9mm  
Join Date: Apr 2003
Posts: 661
Likes: 4
Liked 289 Times in 166 Posts
Default

I wonder if some people become less recoil sensitive with age.

I know some 'mature' men who maintain muscle strength and have very strong hands.

I am not as strong as they but I noticed as I have gotten older recoil doesn't 'excite' me mentally as much.

Yes it can hurt or buck but I don't get mentally upset by it and can just 'deal' with it.

I wonder if some men basically calm as then age and if they have strength actually do better shooting heavier recoiling handguns.
Reply With Quote
  #22  
Old 02-03-2019, 08:21 PM
JimCunn JimCunn is offline
Member
637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm 637-2 in 9mm  
Join Date: Jun 2018
Posts: 377
Likes: 133
Liked 375 Times in 162 Posts
Default

"I wonder if some men basically calm as then age and if they have strength actually do better shooting heavier recoiling handguns".

I dunno. I wasn't recoil sensitive when I was young, so don't notice a difference.

I find that I carry my 8+1 Micro 9 about as often as I do the 9mm titanium cylinder 637-2.

The Micro 9 is noticibly heavier and noticibly smaller than the titanium 9mm 637, but the 637 trigger is much nicer. So far, I've not developed a strong preference between the two, though I do trust the 637 more.

BTW, Walmart Pill Bottles are perfect for carrying three 5-round 9mm moon clip reloads.
Attached Images
File Type: jpg 2018-10-10 12.46.51.jpg (47.5 KB, 12 views)
File Type: jpg 2018-11-17 09.20.03.jpg (67.8 KB, 8 views)
File Type: jpg 2018-12-17 18.07.32.jpg (59.8 KB, 11 views)

Last edited by JimCunn; 02-03-2019 at 08:47 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 12:19 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)