Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Revolvers > S&W Revolvers: 1980 to the Present
o

Notices

S&W Revolvers: 1980 to the Present All NON-PINNED Barrels, the L-Frames, and the New Era Revolvers


Reply
 
Thread Tools Display Modes
  #1  
Old 09-25-2018, 03:38 PM
Halfnutz Halfnutz is offline
Member
New 329pd New 329pd New 329pd New 329pd New 329pd  
Join Date: Dec 2009
Location: Illinois
Posts: 25
Likes: 12
Liked 30 Times in 8 Posts
Default New 329pd

I've had my eye on a 329 for years. I always thought it was a "neat" gun. The familiar lines of a S&W but with "space age" materials. Not to mention the amount of posts about how brutal it was to shoot. I really didn't find many current posts or info on the 329 so I thought I would give my 2 cents on the latest.

When I picked it up from a home based local dealer, he was impressed with the look and feel. Since he is rural, I asked "Got ammo?" "Wanna shoot it?".
He only had some 240gr lead Armscor. I really wanted to switch out the grips to the rubber ones before trying it out, but we tried it with the pretty wood ones first.
The first shots were not bad, I think the Armscor stuff is a bit anemic, but I will say, as many have said before, the recoil is cumulative. The dealer agreed. It did not split my hand open or feel like catching a baseball bat.

Outta the box... Fit, finish, and lock up all looked good. The gun has a nice and smooth DA pull, the SA pull I found was light and crisp enough that I didn't think to put my old trigger weights on it. No complaints here. The rear sight is still the "V" and the front the red fiber optic. The FO is nice and bright and I like it. The only concern I have on FO is from limited past experience, I think they can be fragile, and for that reason I've always shied away from them. The wood grips have some checkering, and the grip frame is exposed. The rubber ones that came with it have slight finger grooves, and cover the grip frame. I had almost ordered a set of X frame grips prior to taking possession, no need, S&W must've realized it made sense to include at least something similar.

On to the weekend...
Hornady Critical Defense 165gr .44 specials are a ***** cat. POI was ridiculously low. The rear sight was bottomed out from the factory, which should improve once I remember to bring an appropriate screw driver. POI was still considerably lower than the following magnum loads.

Remington 210gr Magnums started to increase felt recoil, but still not bad. I followed the manual in loading six, shooting five, and checking for bullet pull. Yep, clear out of the canalure. Not enough to lock up the gun but if you did a partial reload and left one in for the ride, I'm pretty sure you could run into problems.

Remington 240gr. HTP Magnums... now its getting fun, recoil is stout and I found myself re positioning my grip after each SA shot. It was still manageable...for a while, about 30 rounds. Did it hurt? No. But it did start to feel like work, and I decided there was no since in pushing it. I did check for bullet pull on the first cylinder full and while there was some, it had not gone past the canelure.

Still in the cupboard are some Hornady 225gr. FTX lever-evolution and some Federal Premium .240gr Hydra-shoks for another day.

Accuracy... Shot at both 10 and 25 yards, without adjusting the already mentioned low POI. At 10 yards I was able to keep them in the 10 ring on a 25 yard repair center with the 240 grainers. At 25 they were all on paper. I don't shoot a lot of revolver and I'm no Brian Zins, Hershel Anderson, or Bill Blankenship amoung others.

The next day I showed it to a buddy and let him test drive it. 4 rounds and he muttered "I'm done". I finished the last two, and I will admit, after the previous days fun, I decided on not finishing the rest of the box, besides we had beer to drink and football was coming on.

Cleaning... still trying to figure out the best, non destructive way to get the carbon off of the cylinder face and OD

The 329pd is definitely a "niche" gun to be carried a lot and shot a little. Still is a neat piece, and fun at least for a while. Illinois is Chicago Bear country, not BIG BEAR country so I have no intention of test driving any thing heavier than the 240's unless I am planning on a trip were that would seem pertinent.
Reply With Quote
The Following 5 Users Like Post:
  #2  
Old 09-25-2018, 04:01 PM
dogdoc dogdoc is online now
Member
 
Join Date: Oct 2003
Location: Alabama
Posts: 558
Likes: 107
Liked 523 Times in 248 Posts
Default

Leave the carbon on the cylinder face. You may damage the coating with real aggressive scrubbing. I have left it on mine for close to 15 years I think.
Reply With Quote
  #3  
Old 09-25-2018, 05:00 PM
75Vette's Avatar
75Vette 75Vette is offline
Member
New 329pd New 329pd New 329pd New 329pd New 329pd  
Join Date: Jul 2013
Location: South of Atl
Posts: 4,062
Likes: 38,572
Liked 14,464 Times in 3,107 Posts
Default

That was a great (and comical) write up! I've had a 329 NG on a sort of wish list mostly because it is a niche gun but am leery of the recoil. I'd rather have the SS cylinder I think than the Sc for not only the recoil but also 'cause I've heard the Sc cylinders are impossible to get all the way clean without ruining the coating from the factory. It sounds like you're enjoying your new gun. Now the only thing missing are the pics. Thanks for enabling & congrats.
__________________
Don't You Ever Wash That Thing
Reply With Quote
The Following User Likes This Post:
  #4  
Old 09-25-2018, 08:03 PM
brjr51's Avatar
brjr51 brjr51 is offline
Member
New 329pd New 329pd New 329pd New 329pd New 329pd  
Join Date: Feb 2017
Location: IL
Posts: 674
Likes: 686
Liked 1,005 Times in 390 Posts
Default

Nice report,there. My local FFL here in N. IL is also home based and he was recently showing me a 329 PD he had got in for a customer.
Reply With Quote
  #5  
Old 09-26-2018, 02:56 AM
BLUEDOT37's Avatar
BLUEDOT37 BLUEDOT37 is offline
Member
New 329pd New 329pd New 329pd New 329pd New 329pd  
Join Date: Dec 2012
Location: N.E. OKLA.
Posts: 6,461
Likes: 5,859
Liked 9,272 Times in 3,480 Posts
Default

Quote:
Originally Posted by Halfnutz View Post
The rear sight is still the "V" and the front the red fiber optic. The FO is nice and bright and I like it. The only concern I have on FO is from limited past experience, I think they can be fragile, and for that reason I've always shied away from them.
The Hi-Viz seem more rugged than some others (SDM, etc). They also present a fairly square outline so I changed out the V-notch blade (don't really like them either) with a .196" square notch rear sight blade, which I like better.

.

Quote:
Originally Posted by Halfnutz View Post
The rubber ones that came with it have slight finger grooves, and cover the grip frame. I had almost ordered a set of X frame grips prior to taking possession, no need, S&W must've realized it made sense to include at least something similar.
The factory rubber grips do cover the backstrap but they're not flat; too pointed for me which hurts my thumb bone.

I like the X-grips but I prefer to keep them for my X-frame revolvers. I like the Pachmayr Diamond Pro's, as a compromise size, but they still offer plenty of cushion.

.



.

.

.

Quote:
Originally Posted by 75Vette View Post
I've had a 329 NG on a sort of wish list... but am leery of the recoil.
I'd rather have the SS cylinder I think than the Sc for not only the recoil but also 'cause I've heard the Sc cylinders are impossible to get all the way clean without ruining the coating from the factory.
I believe you misspoke? The 329NG comes with a steel cylinder (27.4oz.).
If you meant a 329PD they have a Ti cylinder. The Titanium cylinders do require a milder touch in cleaning them.

For the same reasons you mentioned I replaced my 329PD's Ti cylinder as soon as I got it home. I had replaced the fluted Ss cylinder on my 629-6 with an unfluted cylinder and I used it (fluted Ss) to replace the Ti cylinder. That added 3.6 ozs to the 329PD's (25.2 -> 28.6 oz.) weight. Works for me.

.



.
__________________
Waiting for the break of day
Reply With Quote
The Following 5 Users Like Post:
  #6  
Old 09-26-2018, 09:10 AM
75Vette's Avatar
75Vette 75Vette is offline
Member
New 329pd New 329pd New 329pd New 329pd New 329pd  
Join Date: Jul 2013
Location: South of Atl
Posts: 4,062
Likes: 38,572
Liked 14,464 Times in 3,107 Posts
Default

Thanks for the catch. I was under the impression the NG cylinder was SS, not steel.
__________________
Don't You Ever Wash That Thing
Reply With Quote
  #7  
Old 09-26-2018, 09:50 AM
Radny97 Radny97 is offline
Member
New 329pd New 329pd New 329pd New 329pd New 329pd  
Join Date: Oct 2016
Posts: 49
Likes: 129
Liked 120 Times in 36 Posts
Default

I really like my 329PD. I view it more as a 44 special gun with the ability to shoot 44 mag when in bear country. 44 specials are very comfortable out of it. Can shoot them all day long. There’s nothing else out there in 44 special that weighs 25 ounces and holds 6 shots.
Magnums are stout. But 12 shots of the heaviest stuff is still manageable to me. If i had to defend myself with magnums in the backcountry i practice enough it wouldn’t be a problem.



Sent from my iPhone using Tapatalk
Reply With Quote
The Following User Likes This Post:
  #8  
Old 09-26-2018, 10:26 AM
Halfnutz Halfnutz is offline
Member
New 329pd New 329pd New 329pd New 329pd New 329pd  
Join Date: Dec 2009
Location: Illinois
Posts: 25
Likes: 12
Liked 30 Times in 8 Posts
Default

Thus far I have only tried some Hoppes #9 on a shop towel to clean the OD of the cylinder. It has taken some off but not spotless. The paper towel and my thumb give up before the carbon.
I've got a few pics and a short 6 round video I'll try to get posted this week.
Reply With Quote
  #9  
Old 09-26-2018, 10:39 AM
Halfnutz Halfnutz is offline
Member
New 329pd New 329pd New 329pd New 329pd New 329pd  
Join Date: Dec 2009
Location: Illinois
Posts: 25
Likes: 12
Liked 30 Times in 8 Posts
Default

Quote:
Originally Posted by brjr51 View Post
Nice report,there. My local FFL here in N. IL is also home based and he was recently showing me a 329 PD he had got in for a customer.
The dealer is in rural Mackinaw. Maybe the same fella. I can't imagine there are many of these sold in our neck of the woods.
Reply With Quote
  #10  
Old 09-26-2018, 11:18 AM
3rdgeargrndrr's Avatar
3rdgeargrndrr 3rdgeargrndrr is offline
Member
New 329pd New 329pd New 329pd New 329pd New 329pd  
Join Date: Apr 2014
Posts: 1,118
Likes: 1,611
Liked 1,159 Times in 527 Posts
Default

OP: Smith and Wesson forum rules dictate that any new gun review needs to have minimum of 3 pictures which needs to include
1) full picture of Right side of gun
2) muzzle close up
3) target and group size
Reply With Quote
The Following User Likes This Post:
  #11  
Old 09-27-2018, 10:36 AM
Shuz Shuz is offline
Member
New 329pd New 329pd New 329pd New 329pd  
Join Date: Sep 2001
Posts: 383
Likes: 178
Liked 110 Times in 66 Posts
Default

First let me state that I love my 329PD 4" revolver. I've had it for about 13 years now and shoot it a good bit. However, you need to keep your eye on the top strap shield for a groove that will wear in from gas cutting. When it gets real pronounced, either apply some J-B Weld in the groove or send the gun back to Smith and they will replace the shield for free. I've had mine back to the factory twice before I started applying J-B Weld. Others who have tried the J-B Weld have claimed that it did not work for them. My guess is that they didn't use the high temp version of J-B Weld. YMMV also! Good luck with your new revolver.
Reply With Quote
The Following User Likes This Post:
  #12  
Old 09-27-2018, 11:49 AM
Halfnutz Halfnutz is offline
Member
New 329pd New 329pd New 329pd New 329pd New 329pd  
Join Date: Dec 2009
Location: Illinois
Posts: 25
Likes: 12
Liked 30 Times in 8 Posts
Default


Last edited by Halfnutz; 09-27-2018 at 11:50 AM. Reason: redirected url
Reply With Quote
The Following User Likes This Post:
  #13  
Old 09-27-2018, 11:51 AM
Halfnutz Halfnutz is offline
Member
New 329pd New 329pd New 329pd New 329pd New 329pd  
Join Date: Dec 2009
Location: Illinois
Posts: 25
Likes: 12
Liked 30 Times in 8 Posts
Default



10yards, with 240gr Remington HTP.

Last edited by Halfnutz; 09-27-2018 at 11:52 AM. Reason: details
Reply With Quote
The Following 2 Users Like Post:
  #14  
Old 09-27-2018, 01:04 PM
Paul105 Paul105 is offline
Member
New 329pd New 329pd New 329pd New 329pd New 329pd  
Join Date: Jul 2004
Location: Montana
Posts: 1,046
Likes: 580
Liked 1,839 Times in 603 Posts
Default

I've had three over the years. Still have two. Mine are equipped with the Hogue 500 S&W tamer grips. Shot around 9,000 rnds thru them (started keeping count after first negative event). Loads were 240gr to 265gr Jacketed/Cast at a chronoed 1,150 to 1,250 fps (Rem 240gr JFP factory chronoed 1,250 fps). My primary carry gun (all day every day) for the better part of a decade. Still carry one when bow hunting elk in high country. Always considered the 329 to be a primary defensive gun. For this reason, always liked the "V" notch rear and fiber optic front.

With that said, these are very specialized pieces of equipment. If shot a lot with loads equaling the above, they will require frequent trips back to the mother ship. If primary use is .44 special equiv and occasional .44 mag, then maint/repair frequency probably a non issue.

I'm a fan, but don't try to make it more than it was designed to be -- short range, up close and personal, light weight carry gun. Have run 300gr+ over max charge(s) of 110/295 -- not for continued use, but doable.

Continued shooting of hi intensity loads will wear on the anatomy, so proceed with caution.

Light weight, V notch rear, fiber optic front, and heavy recoil are not real conducive to precision accuracy. Here's a 30 round group I shot at 25 yds offhand when I was shooting them a lot. 19.3 gr A2400, 240gr Rem JHP.



One of my carry guns:



.


Been carrying it the last 3 weekends bow hunting elk here in MT.

Paul
Reply With Quote
The Following 8 Users Like Post:
  #15  
Old 09-29-2018, 12:26 PM
Ray F. Ray F. is offline
Member
New 329pd New 329pd New 329pd New 329pd New 329pd  
Join Date: Aug 2018
Posts: 6
Likes: 0
Liked 1 Time in 1 Post
Default

I just sent mine off to S&W for inspection. It locked up on round #43. I couldn't get the cylinder to advance or swing out without some unrecommended "persuasion. No bullet creep seen. The major internet consensus (or rumor) is that it's caused by the lock getting hung up by heavy recoil. I don't know if I subscribe to that, however, because not every gun experiences it, despite stout loads. I was using Buffalo Bore Reduced Recoil.

I have the same grip as Paul and agree with what he said with exception to being a fan. I want to like it, but we're not off to a good start.

I hope to get word from S&W next week.

Last edited by Ray F.; 09-29-2018 at 12:28 PM.
Reply With Quote
  #16  
Old 09-29-2018, 02:53 PM
shocker's Avatar
shocker shocker is offline
Member
New 329pd New 329pd New 329pd New 329pd New 329pd  
Join Date: Dec 2012
Location: Michigan
Posts: 1,482
Likes: 550
Liked 1,427 Times in 666 Posts
Default

Quote:
Originally Posted by Ray F. View Post
The major internet consensus (or rumor) is that it's caused by the lock getting hung up by heavy recoil.
The lock doesn't restrict the cylinder from being opened or closed in the normal way.
Reply With Quote
  #17  
Old 09-30-2018, 09:09 PM
Ray F. Ray F. is offline
Member
New 329pd New 329pd New 329pd New 329pd New 329pd  
Join Date: Aug 2018
Posts: 6
Likes: 0
Liked 1 Time in 1 Post
Default

Quote:
Originally Posted by shocker View Post
The lock doesn't restrict the cylinder from being opened or closed in the normal way.
I really hope its a fitment issue that gets fixed right away. I did notice that the anodizing under the top strap had been scraped away by the 3rd cylinder load. Don’t know if that’s a clue.

I like the gun and plan to hand roll rounds and shoot it regularly. Haven’t carried it yet. Eager to. Gotta get my 500 flawless rounds before it earns that right, though.
Reply With Quote
  #18  
Old 10-07-2018, 07:22 PM
Ray F. Ray F. is offline
Member
New 329pd New 329pd New 329pd New 329pd New 329pd  
Join Date: Aug 2018
Posts: 6
Likes: 0
Liked 1 Time in 1 Post
Default

Quote:
Originally Posted by Ray F. View Post
I really hope its a fitment issue that gets fixed right away. I did notice that the anodizing under the top strap had been scraped away by the 3rd cylinder load. Don’t know if that’s a clue.

I like the gun and plan to hand roll rounds and shoot it regularly. Haven’t carried it yet. Eager to. Gotta get my 500 flawless rounds before it earns that right, though.
Update: I was contacted by Smith. They consider the gun "unrepairable and deemed this a warranty issue" for replacement. I asked for specifics and await an answer. I'll post if they provide one.
Reply With Quote
The Following User Likes This Post:
  #19  
Old 10-10-2018, 09:50 PM
Ray F. Ray F. is offline
Member
New 329pd New 329pd New 329pd New 329pd New 329pd  
Join Date: Aug 2018
Posts: 6
Likes: 0
Liked 1 Time in 1 Post
Default

Quote:
Originally Posted by Ray F. View Post
Update: I was contacted by Smith. They consider the gun "unrepairable and deemed this a warranty issue" for replacement. I asked for specifics and await an answer. I'll post if they provide one.
Smith responded to my reply, however, they declined to address my query about what had happened. They stated 3 to 4 weeks for replacement.
Reply With Quote
  #20  
Old 10-10-2018, 10:08 PM
Engine49guy's Avatar
Engine49guy Engine49guy is offline
Member
New 329pd New 329pd New 329pd New 329pd New 329pd  
Join Date: May 2009
Location: South Florida
Posts: 7,770
Likes: 2,470
Liked 8,296 Times in 2,908 Posts
Default

Almost bought a 329PD years ago but as I dont hike or backpack and already consider the Mountain gun a handful just couldnt justify it.

My buddy hikes alot in Griz country so did recommended one for him.
Reply With Quote
  #21  
Old 10-12-2018, 01:14 AM
junior1954 junior1954 is offline
Member
New 329pd New 329pd New 329pd New 329pd New 329pd  
Join Date: Jan 2012
Location: Chicago, Il
Posts: 12
Likes: 3
Liked 1 Time in 1 Post
Default

Always wanted a .44 and I'm a sucker for scandium alloy Smiths. I have an R8 that's a tack driver and I love as well as a 386NG, a safe queen that's been discontinued (both .357's). I ordered a 329PD two days ago and can't wait to get her! I also ordered some 255gr Buffalo Bore .44 magnums for defense and Hornady 180gr .44 specials for practice. Wanted a revolver for backup in the woods and there isn't anything in our neck of the woods it can't handle. Anxious to see if I'll need aftermarket grips to tame the magnum loads as many have mentioned. I've shot my Bond Arms .357 magnum derringer and it was manageable, though I wouldn't consider it a range gun.

Last edited by junior1954; 10-12-2018 at 01:36 AM.
Reply With Quote
  #22  
Old 11-08-2018, 02:33 PM
bondjamesbond bondjamesbond is offline
Member
New 329pd New 329pd New 329pd New 329pd New 329pd  
Join Date: Nov 2010
Location: desert
Posts: 78
Likes: 46
Liked 210 Times in 49 Posts
Default

Speer shotshells jump crimp every round in mine
Reply With Quote
The Following User Likes This Post:
  #23  
Old 11-08-2018, 11:40 PM
Anschutz Anschutz is offline
Member
New 329pd New 329pd New 329pd New 329pd New 329pd  
Join Date: Aug 2016
Location: Colorado
Posts: 42
Likes: 49
Liked 69 Times in 21 Posts
Default

Those are really nice guns. Congrats on your purchase. I'm sure they're a joy to carry but I don't think I could effectively deliver follow up shots with it.
Reply With Quote
The Following User Likes This Post:
  #24  
Old 11-14-2018, 10:30 PM
Deadeyedave Deadeyedave is offline
Member
New 329pd New 329pd New 329pd New 329pd New 329pd  
Join Date: Sep 2011
Posts: 3
Likes: 1
Liked 1 Time in 1 Post
Default

I just bought a 329PD and love it. Shot a box of 180gr Remington's and 15 other reloads. Settled on Hornady 240gr XTPs over 11 grains of CFE Pistol. Still need to shoot them but expect them to be around 1200 or 1250 FPS.
Also used a factory crimp die with serious crimp to avoid bullet jump.
It the kind of gun that once you pick it up and hold it, you have to have one.
Reply With Quote
The Following User Likes This Post:
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Heaviest loads for a 329PD, Night guard .44 mag, or 329PD back packer? kip S&W Revolvers: 1980 to the Present 40 05-17-2020 10:28 PM
329Pd KAT S&W Revolvers: 1980 to the Present 29 11-20-2013 12:06 AM
SPF - S&W 329PD in FL flyandscuba GUNS - For Sale or Trade 0 04-03-2013 01:45 PM
329PD. yashua-p The Lounge 0 04-03-2013 12:29 PM
Looking for s&w 329pd or 629 Huntr Pat WANTED to Buy 1 03-06-2011 07:39 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 07:56 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)