|
|
03-25-2020, 09:37 AM
|
|
Member
|
|
|
Join Date: Oct 2008
Location: Red River Valley
Posts: 7,693
Likes: 13,050
Liked 28,616 Times in 5,154 Posts
|
|
Sometimes, I Jest Can't Stop The Wheels From Turning
This shut in thing ain't stopping this old man from putterin' around in the tool shed....
Got this 629 some time back.
What I really need is a stainless summer time sidearm for EDC.
So, I jest got to thinking.....Maybe jest maybe....
And now I's got one. A 3 1/2 incher that works with my EDC rig.
.
__________________
"IN GOD WE TRUST"
Last edited by keith44spl; 09-22-2020 at 05:51 PM.
|
The Following 66 Users Like Post:
|
.460 Magnum, 16thVACav, 1911-10MM, 22hipower, 2ndshift, 75Vette, 9mmsubgun-m11, ancient-one, andy52, arjay, Bob L, bronco45, browningcollector, brucev, CajunBass, cbunix23, Chukar60, cndrdk, Collo Rosso, CScott, D1911, delcrossv, Doug M., Farmer17, fxdrider, gdogs, Green Frog, HOUSTON RICK, j38, JH1951, jimbo728, Joe Kent, John F., kaaskop49, kraynky, krsmith58, lawandorder, LEO918, loc n load, lscocoa, MAG-NUM, Mike, SC Hunter, Moo Moo, Narragansett, old bear, Old cop, OldChief, Old_Cop, pawncop, Pig Hunter, Pine_Worker, Protocall_Design, RobertJ., RSBH44, SAFireman, shell627, Skeptic 9c, SLT223, StrawHat, sureshotbob, tennexplorer, Tom Kent, vytoland, xray97, Zarr, zipty6 |
03-25-2020, 09:43 AM
|
Member
|
|
|
Join Date: Oct 2006
Location: Indiana
Posts: 1,056
Likes: 1,090
Liked 1,626 Times in 486 Posts
|
|
What grips are on the 3 1/2 incher?
|
The Following 2 Users Like Post:
|
|
03-25-2020, 09:44 AM
|
|
US Veteran
|
|
|
Join Date: Feb 2017
Location: Missouri
Posts: 2,929
Likes: 3,902
Liked 6,802 Times in 1,851 Posts
|
|
That's really a nice combo, love the leather and what I assume are KB stocks.
__________________
SWHF #595
|
The Following User Likes This Post:
|
|
03-25-2020, 09:45 AM
|
Member
|
|
|
Join Date: Jul 2010
Location: Central VA
Posts: 8,657
Likes: 1,569
Liked 9,423 Times in 4,223 Posts
|
|
It will do to "ride the river with." I can't think of anything better for EDC than a stainless gun, properly chambered and sized for the job at hand. Those grips are pretty sweet and what I see of the leather has my wheels turning as well. Great to hear from you, my amigo... stay safe!
Froggie
|
The Following User Likes This Post:
|
|
03-25-2020, 09:49 AM
|
|
Member
|
|
|
Join Date: Oct 2008
Location: Red River Valley
Posts: 7,693
Likes: 13,050
Liked 28,616 Times in 5,154 Posts
|
|
Quote:
Originally Posted by greenmachine
What grips are on the 3 1/2 incher?
|
The stocks are from Keith Brown, exhibition grade 'Cokes'
.
__________________
"IN GOD WE TRUST"
|
The Following User Likes This Post:
|
|
03-25-2020, 10:30 AM
|
Member
|
|
|
Join Date: Oct 2006
Location: Indiana
Posts: 1,056
Likes: 1,090
Liked 1,626 Times in 486 Posts
|
|
Those are beautiful.
|
The Following User Likes This Post:
|
|
03-25-2020, 10:35 AM
|
|
Member
|
|
|
Join Date: Mar 2010
Location: North Chesterfield, Va.
Posts: 6,296
Likes: 8,909
Liked 13,322 Times in 3,302 Posts
|
|
Not bad...not bad a'tall.
__________________
John 3:16 .
|
The Following User Likes This Post:
|
|
03-25-2020, 10:43 AM
|
Member
|
|
|
Join Date: Jan 2008
Location: Eastern Nebraska
Posts: 3,907
Likes: 10,378
Liked 8,350 Times in 2,888 Posts
|
|
nicely done... beautiful combination
|
The Following User Likes This Post:
|
|
03-25-2020, 10:58 AM
|
|
Moderator
|
|
|
Join Date: Jan 2007
Location: Great Lakes State
Posts: 29,932
Likes: 12,824
Liked 34,092 Times in 8,012 Posts
|
|
Nicely done!
Did you cut and taper the barrel yourself? Relocate the front sight?
If so, you’re a pretty handy fella to have around!
__________________
"I also cook."
|
The Following 2 Users Like Post:
|
|
03-25-2020, 11:02 AM
|
|
US Veteran
|
|
|
Join Date: Oct 2013
Location: Central Montana
Posts: 13,706
Likes: 12,853
Liked 39,460 Times in 10,039 Posts
|
|
Nice work. Looks perfect. I take it you cut thee barrel down and sanded thee markings off. No doubt you did it on both sides to make it symmetrical.
|
The Following User Likes This Post:
|
|
03-25-2020, 11:45 AM
|
|
SWCA Member
|
|
|
Join Date: Sep 2009
Location: Home of the Alamo
Posts: 5,838
Likes: 16,525
Liked 15,555 Times in 3,100 Posts
|
|
Looks great Dave!
Now you just need to make some 'Summer time carry' leather goods to goo with
__________________
On the Oak Savannah
|
The Following User Likes This Post:
|
|
03-25-2020, 12:07 PM
|
|
Member
|
|
|
Join Date: Mar 2006
Location: Sacramento, California
Posts: 469
Likes: 978
Liked 1,381 Times in 160 Posts
|
|
Looks sweet Dave. Nicely done!
|
The Following User Likes This Post:
|
|
03-25-2020, 12:13 PM
|
|
Member
|
|
|
Join Date: Oct 2008
Location: Red River Valley
Posts: 7,693
Likes: 13,050
Liked 28,616 Times in 5,154 Posts
|
|
Quote:
Originally Posted by steelslaver
Nice work. Looks perfect. I take it you cut thee barrel down and sanded thee markings off. No doubt you did it on both sides to make it symmetrical.
|
Yup, removed what was left of the roll markings....
When this current panic slows down,
I'll run it by the engraver and have those re-cut.
Quote:
s&wchad Nicely done!
Did you cut and taper the barrel yourself? Relocate the front sight?
If so, you’re a pretty handy fella to have around!
|
I do all my own machine work....
Only send out the plating and engraving.
.
.
__________________
"IN GOD WE TRUST"
|
The Following 12 Users Like Post:
|
75Vette, ancient-one, arjay, bronco45, delcrossv, John F., MAG-NUM, OldChief, RSBH44, s&wchad, SAFireman, steelslaver |
03-25-2020, 12:29 PM
|
Member
|
|
|
Join Date: Jan 2009
Location: Iowa
Posts: 902
Likes: 2,761
Liked 1,036 Times in 443 Posts
|
|
Mr. Dave, did you silver solder the sight ramp on or cut a tenon and groove and pin it on? Always enjoy what you put together!
|
03-25-2020, 12:41 PM
|
|
Member
|
|
|
Join Date: Oct 2008
Location: Red River Valley
Posts: 7,693
Likes: 13,050
Liked 28,616 Times in 5,154 Posts
|
|
Quote:
Originally Posted by Pig Hunter
Mr. Dave, did you silver solder the sight ramp on or
cut a tenon and groove and pin it on?
Always enjoy what you put together!
|
Milled a tenon & groove........
.
__________________
"IN GOD WE TRUST"
|
The Following 2 Users Like Post:
|
|
03-25-2020, 01:11 PM
|
Member
|
|
|
Join Date: Feb 2001
Location: Midwest
Posts: 576
Likes: 375
Liked 678 Times in 247 Posts
|
|
Suppose you are carrying that and need to defend yourself? You will win the style points hands down!
|
The Following 4 Users Like Post:
|
|
03-25-2020, 01:18 PM
|
|
US Veteran
|
|
|
Join Date: Oct 2013
Location: Central Montana
Posts: 13,706
Likes: 12,853
Liked 39,460 Times in 10,039 Posts
|
|
Keith 44
Hereis another option other than engraving.Get a stencil for use with electrical etching. It is how I put my makers mark on my knife blades which are very hard. Properly done they are very clear. A small 12 volt battery charge will work fine for a power source. Negative on work piece and a dapper on the positive side. I use a piece of nylon with a copper plate attached and a felt covering held with a rubber band. But, some guys just use a Q-tip with the clip from the neg stuck where the cotton joins the stick. Use salt water to wet the dapper and hold it on the stencil or in the case of the Q-tip wipe the stencil for a while. Say 20-30 seconds. It will remove metal in clear areas of stencil. Longer you etch the deeper the etch. You can make crude stencils by cutting out tape, varnishing or painting an area and scraping away where you want the mark, Finer ones can be made via using an exposure method and developing. I order mine from Ernie at Blue Lightning Stencil Etch.
He will work from your art work or whatever
Reusable many times and you can get quite a bit of detail. It is how I would remark a barrel. I am sure you could get one that said 44 Special, Smith & Wesson, S&W and a couple of others on one sheet.
Last edited by steelslaver; 03-25-2020 at 03:16 PM.
|
The Following 7 Users Like Post:
|
|
03-25-2020, 01:54 PM
|
|
Member
|
|
|
Join Date: Oct 2008
Location: Red River Valley
Posts: 7,693
Likes: 13,050
Liked 28,616 Times in 5,154 Posts
|
|
Steelslaver,
I'll check that out.
Thanks
Dave
.
__________________
"IN GOD WE TRUST"
|
03-25-2020, 03:40 PM
|
Member
|
|
|
Join Date: Apr 2016
Posts: 1,464
Likes: 3,979
Liked 2,918 Times in 803 Posts
|
|
steelslaver,
I don't know much about etching and etc. but I have to say that your knives are real works of art.
__________________
Ed
|
The Following User Likes This Post:
|
|
03-25-2020, 03:53 PM
|
Member
|
|
|
Join Date: Jan 2005
Location: Edmond, OK
Posts: 5,220
Likes: 1,136
Liked 6,614 Times in 2,462 Posts
|
|
Great looking gun it looks like regular factory production, some of the barrel cuts I've seen from big name gunsmiths don't look as good.
|
The Following 2 Users Like Post:
|
|
03-25-2020, 06:08 PM
|
|
Member
|
|
|
Join Date: Oct 2008
Location: Red River Valley
Posts: 7,693
Likes: 13,050
Liked 28,616 Times in 5,154 Posts
|
|
Quote:
Originally Posted by Farmer17
Great looking gun it looks like regular factory production, some of the barrel cuts I've seen from big name gunsmiths don't look as good.
|
Thanks for the kind words....
I've cut a few in the last 40 years... Maybe two hundred or so.
Bob'd several RMs and a few other pre-war barrels too.
.
__________________
"IN GOD WE TRUST"
|
The Following User Likes This Post:
|
|
03-25-2020, 06:22 PM
|
|
US Veteran
|
|
|
Join Date: Oct 2013
Location: Central Montana
Posts: 13,706
Likes: 12,853
Liked 39,460 Times in 10,039 Posts
|
|
I have a question, How do you do your muzzles? I have a fixture to put my barrels in my lathe and center the muzzle. Once I have it flushed off flat, I cut the front of the rib back a bit, then setup to slowly take the cutter tip across at a shallow angle from outside to bore, then use a ball end mill to start the center. Then I use about 120 grit to take the top of where the inside cut meets the outside to better round and smooth things out. Then go to higher grits. I also have 2 pieces of brass, one with a rounded end and the other cupped. I hold emery grit against those while they are chucked in tail piece and press them to muzzle. Finish with a ball bearing and valve grinding compound on the actual muzzle. Is there a simpler better way. The rib makes it way difficult than if it was just a round piece. Limits your tool approach to piety much dead on from the front.
Last edited by steelslaver; 03-25-2020 at 06:25 PM.
|
The Following User Likes This Post:
|
|
03-25-2020, 06:28 PM
|
|
Member
|
|
|
Join Date: Jul 2017
Location: Pittsburgh PA
Posts: 1,764
Likes: 1,648
Liked 3,117 Times in 1,014 Posts
|
|
Wow that 3.5 inch barrel looks amazing on that 629. Would you be interested in cutting and removing the marks on a 64 barrel I have?
__________________
-Matt
|
03-25-2020, 06:46 PM
|
|
Member
|
|
|
Join Date: Oct 2008
Location: Red River Valley
Posts: 7,693
Likes: 13,050
Liked 28,616 Times in 5,154 Posts
|
|
Quote:
Originally Posted by steelslaver
I have a question, How do you do your muzzles? I have a fixture to put my barrels in my lathe and center the muzzle. Once I have it flushed off flat, I cut the front of the rib back a bit, then setup to slowly take the cutter tip across at a shallow angle from outside to bore, then use a ball end mill to start the center. Then I use about 120 grit to take the top of where the inside cut meets the outside to better round and smooth things out. Then go to higher grits. I also have 2 pieces of brass, one with a rounded end and the other cupped. I hold emery grit against those while they are chucked in tail piece and press them to muzzle. Finish with a ball bearing and valve grinding compound on the actual muzzle. Is there a simpler better way. The rib makes it way difficult than if it was just a round piece. Limits your tool approach to piety much dead on from the front.
|
I use a couple of different crowning tools that I made here in the shop
from old carbide inserts silver soldered to a square piece of cold roll.
For S&W barrels,
One is ground with a 1/8" concave radius followed by a flat to dress the rib to the correct setback.
The other one has a 1/16" concave radius for the thinner walls of tapered barrels.
These lathe tools finish cut the crown and rib in one operation.
I use a 45 degree crowning cutter with a bore pilot to actual finish the cut on the rifling.
.
__________________
"IN GOD WE TRUST"
Last edited by keith44spl; 03-25-2020 at 07:09 PM.
|
03-25-2020, 07:44 PM
|
|
US Veteran
|
|
|
Join Date: Oct 2013
Location: Central Montana
Posts: 13,706
Likes: 12,853
Liked 39,460 Times in 10,039 Posts
|
|
Quote:
Originally Posted by keith44spl
I use a couple of different crowning tools that I made here in the shop
from old carbide inserts silver soldered to a square piece of cold roll.
For S&W barrels,
One is ground with a 1/8" concave radius followed by a flat to dress the rib to the correct setback.
The other one has a 1/16" concave radius for the thinner walls of tapered barrels.
These lathe tools finish cut the crown and rib in one operation.
I use a 45 degree crowning cutter with a bore pilot to actual finish the cut on the rifling.
.
|
Figured there was a better way to skin the cat. I finally picked up a muzzle tool with a pilot a while back, but have not done a barrel since I gat it. My way works, But, a lot of fiddling to get it looking right. One interesting thing is, I studied a lot of S&W muzzles when I first started to cut one down. Their is a lot of variation from one to the other. So, "just like factory" has some leeway.
Last edited by steelslaver; 03-25-2020 at 07:45 PM.
|
The Following User Likes This Post:
|
|
03-25-2020, 09:40 PM
|
Member
|
|
|
Join Date: Mar 2014
Location: East Central Indiana
Posts: 1,045
Likes: 10,578
Liked 689 Times in 422 Posts
|
|
That is a sweet looking carry piece indeed.Nice work.
|
The Following User Likes This Post:
|
|
03-26-2020, 12:29 AM
|
|
Member
|
|
|
Join Date: Jan 2009
Posts: 3,309
Likes: 2,723
Liked 5,054 Times in 1,442 Posts
|
|
That’s the best looking stainless gun I've ever seen. Should you think of parting with it, I would show interest.
|
The Following User Likes This Post:
|
|
|
Posting Rules
|
|
|
|
|