Did SW ever make a 4" Model 29 FULL UNDERLUG 4" barrel perhaps with a pinned front sight?

I have a 29-4 that I had a 5" full underlug barrel put on a few years back.

It appears my competition season will not take place this year which gives me some time to think about next year.

I can only use 4" max length revolvers (which I use a 686 and 586 as a back up for the past 10+ years) and I would like to try my luck with an Nframe.

4" barrel is only a thought at this point. I would like a black pinned front sight for target use.

here is my 5". YUK on the rubbers. I have some Ahrends but currently working on this piece as the floating hand needs replacement and the front locking bolt needs to be fitted as the previous one was too short.

__________________
if you're gonna be a bear...

A 29 with a 4 inch full underlug barrel, not that I know of. You might fins a 4 inch 627. Love your 29 BTW.

629 V-Comp. If they count the length of the compensator then no.

thanks for the responses so far.

if no full under lug. 4" exists....

did they make a Model 29 heavy barrel 4" pinned sight?

(only blued to match)

thanks

__________________
if you're gonna be a bear...

What about a 4" Mod. 629?

With "lite" .44 magnum loads or .44 specials, it may be a candidate.

Attached Images

IMG_0195.jpg (130.2 KB, 34 views)

what revision of the 629 will get you a pinned front sight?

Nice piece jdlii

__________________
if you're gonna be a bear...