|
|
10-11-2020, 10:02 PM
|
|
Member
|
|
|
Join Date: Jul 2020
Location: Maine
Posts: 451
Likes: 64
Liked 533 Times in 218 Posts
|
|
Bluing Repair
Looking at a revolver with a little ding in the bluing. It's a small ding. I'm thinking a little bottle with a touch-up brush would get it done but I'm not sure such a product even exists. What words of wisdom can you guys share with me?
|
The Following User Likes This Post:
|
|
10-11-2020, 10:17 PM
|
|
SWCA Member
|
|
|
Join Date: Apr 2017
Location: Northern Colorado
Posts: 808
Likes: 1,508
Liked 3,039 Times in 509 Posts
|
|
lots of products available; check Brownell's. I've used Oxpho Blue. It works OK on small areas. Remove all grease with acetone, heat the spot with a hair dryer, then apply the product. Doesn't quite match the factory finish, but it looks better than bare metal.
|
The Following User Likes This Post:
|
|
10-11-2020, 10:20 PM
|
Member
|
|
|
Join Date: Oct 2007
Location: Arizona
Posts: 375
Likes: 48
Liked 567 Times in 220 Posts
|
|
I have tried several different touch up products.
They all seem to make the ding less noticeable.
But nothing will make it totally go away.
|
The Following User Likes This Post:
|
|
10-11-2020, 11:58 PM
|
Member
|
|
|
Join Date: Apr 2004
Location: surrey,b.c.,kanada
Posts: 853
Likes: 1,002
Liked 1,106 Times in 422 Posts
|
|
Ok I'm gonna get yelled at.
I had/have the exact same problem with my 29-2. One small rust spot behind the smith and wesson on the barrel ( 6.5 "). About the size of a pin head maybe a tad larger, I cleaned it out swabbed it out with alcohol, I heated the barrel with a hair dryer, and used G96 liquid gun blue, then a second coat, it wasn't the saw blue but close, Then I took a clear nail polish and dabbed it, let it dry then again, let it dry, next day I used the roughest paper towel I could find and buffed it until I was able to notice it but not to bbad and a lot better than when I started, I screwed up in the first place and I'm not trying to put a fix on to fool anyone, but its been 6 months now and there is no open wound, and I don't want to lose the original saw blue.
Just my story for what its worth, and I know solvents will remove this fix and I'll have to do a makeover.
|
10-12-2020, 05:10 AM
|
|
Member
|
|
|
Join Date: Apr 2006
Posts: 17,820
Likes: 7,852
Liked 25,737 Times in 8,695 Posts
|
|
IMHO the two best Bluing products are Birchwood Casey Perma-blue and Brownell's Oxpho Blue paste. Proper cleaning and heating up the metal with a hair dryer does help the end result.
That said, neither is really permanent and won't stand up like hot bluing - but better than nothing. If the bluing repair is in an area that doesn't get touched much by hands or holsters it will last longer.
|
10-12-2020, 06:42 AM
|
|
SWCA Member
|
|
|
Join Date: Jan 2007
Location: Ashtabula County, Ohio
Posts: 6,074
Likes: 9,342
Liked 13,754 Times in 4,037 Posts
|
|
With the exception of an old (probably discontinued) product, I have had the best results from the paste versions of the bluing formulas.
Kevin
__________________
Unshared knowledge is wasted.
|
10-12-2020, 07:06 AM
|
Member
|
|
|
Join Date: Apr 2007
Location: Virginia
Posts: 8,770
Likes: 19,523
Liked 11,871 Times in 5,391 Posts
|
|
No cold blue is likely to be a perfect match, but for a tiny spot, Oxpho Blue paste, G96 paste or maybe the Birchwood Casey Perma Blue pen.
__________________
VCDL, GOA, NRA
|
10-12-2020, 07:33 PM
|
Absent Comrade
|
|
|
Join Date: Jan 2011
Location: Planet earth
Posts: 13,869
Likes: 2,079
Liked 13,354 Times in 5,549 Posts
|
|
I clean the area with rubbing alcohol then heat it with a hair dryer. Use a small q tip to apply the cold bluing. Reapply it till you get the color you want them oil it.
|
10-16-2020, 10:44 PM
|
Absent Comrade
|
|
|
Join Date: Jan 2011
Location: Planet earth
Posts: 13,869
Likes: 2,079
Liked 13,354 Times in 5,549 Posts
|
|
If the bluing isn’t working put some bluing on with a q tip and use 0000 steelwool and lightly rub the bluing over the area.
|
10-16-2020, 11:05 PM
|
|
US Veteran
|
|
|
Join Date: May 2018
Location: Selah, Washington
Posts: 708
Likes: 2,255
Liked 1,188 Times in 424 Posts
|
|
A friend bought a model 29 using Gunbroker, it arrived at the LGS and it was immediately apparent a sharpie or a black marker had been used. The gun went back to the seller.
__________________
U.S. Coast Guard, retired CPO
|
The Following 2 Users Like Post:
|
|
10-17-2020, 12:40 AM
|
Member
|
|
|
Join Date: Apr 2004
Location: surrey,b.c.,kanada
Posts: 853
Likes: 1,002
Liked 1,106 Times in 422 Posts
|
|
So it should
Quote:
Originally Posted by Oracle
A friend bought a model 29 using Gunbroker, it arrived at the LGS and it was immediately apparent a sharpie or a black marker had been used. The gun went back to the seller.
|
With my post on blu repair I stated the repair was to stop any further damage from the hole in the factory blu, but in no way would it be sold with the tale being left out, good for your friend.
|
The Following User Likes This Post:
|
|
10-17-2020, 04:53 PM
|
Absent Comrade
|
|
|
Join Date: Jan 2011
Location: Planet earth
Posts: 13,869
Likes: 2,079
Liked 13,354 Times in 5,549 Posts
|
|
I buy the best condition I can afford. A condition of 99.99% is tops, a condition of 98.99% is the least I’ll buy but most are 99.99%.
|
The Following User Likes This Post:
|
|
|
Posting Rules
|
|
|
|
|