Smith & Wesson Forum

Go Back   Smith & Wesson Forum > >

Notices

S&W Revolvers: 1980 to the Present All NON-PINNED Barrels, the L-Frames, and the New Era Revolvers


Reply
 
Thread Tools Display Modes
  #1  
Old 04-02-2021, 10:30 AM
S&W Fan S&W Fan is offline
Member
A bunch of really ugly Smiths  
Join Date: May 2004
Location: Colorado
Posts: 3,165
Likes: 3,246
Liked 6,247 Times in 1,375 Posts
Default A bunch of really ugly Smiths

Hey you Denver area guys the Sportman's Warehouse in Sheridan has a case full of seriously ugly Smiths. If you remember the recent thread sigp220 put up about his 3" 13 you'll have an idea of what I'm talking about.

They're displayed so the "nice" side shows out to the customer but once you turn them over man are they nasty! I looked at 2 66-2 2.5" and couldn't believe the amount of rust on the sides, barrels, cylinders, and peeking inside the ratchet cutout in the recoil shield the internals are horrible.

They have 686s, 66s, 10s, a 12, 581, all possible security or police trade ins after being used as boat anchors.

I was ready to take one of the 66s home but after looking at it I didn't want to take on a restoration project of that magnitude.

Happy Hunting.
Reply With Quote
The Following 7 Users Like Post:
  #2  
Old 04-02-2021, 02:06 PM
VictorLouis VictorLouis is offline
Member
 
Join Date: Feb 2000
Location: Phoenix, AZ
Posts: 1,044
Likes: 39
Liked 745 Times in 398 Posts
Default

One of my area SW's got some in, also.
Project-guns! Some are price reasonably, and
some.....well, there's a finger for every trigger.
Reply With Quote
  #3  
Old 04-02-2021, 02:14 PM
Breakaway500 Breakaway500 is online now
Member
A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths  
Join Date: Jan 2017
Location: Ma
Posts: 1,611
Likes: 8,715
Liked 3,813 Times in 1,033 Posts
Default

Know when to walk away..and when to run..
Reply With Quote
The Following 4 Users Like Post:
  #4  
Old 04-02-2021, 02:55 PM
mk70ss mk70ss is online now
Member
A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths  
Join Date: Mar 2008
Location: Tennessee
Posts: 256
Likes: 147
Liked 1,076 Times in 166 Posts
Default

There is always a use for truck/camper/tractor guns.......
Reply With Quote
The Following 2 Users Like Post:
  #5  
Old 04-02-2021, 05:37 PM
HOUSTON RICK HOUSTON RICK is offline
Member
A bunch of really ugly Smiths A bunch of really ugly Smiths  
Join Date: Dec 2003
Location: HOUSTON, TEXAS
Posts: 8,591
Likes: 5,531
Liked 11,303 Times in 4,335 Posts
Default

Are they priced accordingly and function without rust?
Reply With Quote
  #6  
Old 04-02-2021, 05:49 PM
sigp220.45's Avatar
sigp220.45 sigp220.45 is offline
US Veteran
A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths  
Join Date: Dec 2005
Location: Colorado
Posts: 6,118
Likes: 20,086
Liked 21,741 Times in 3,499 Posts
Default

Iíll have to check that one out. Parker hasnít gotten any more rust buckets in.

The guy at mine confirmed they are getting them from Century Arms, which has very similar ones up on their website. They must have bought out every evidence room in the country.

They are generally overpriced for condition, but not always and they will wheel and deal on them. Mine has an older 4Ē Python for $1399 and its been there for months, which gives you and idea of condition.

I recently bought this Police Service Six for $400 plus background fee. Hard to mess up a stainless Ruger.

SW will also sell you a couple boxes of stashed ammo for the pre-lunacy price if you buy a gun.
Attached Thumbnails
A bunch of really ugly Smiths-9c87e908-bd6b-42f6-9981-1f211440211c-jpg   A bunch of really ugly Smiths-f876feb1-a2e5-4244-823c-ef1eb21e3929-jpg  
__________________
Member of the immune herd.

Last edited by sigp220.45; 04-02-2021 at 05:55 PM.
Reply With Quote
The Following 5 Users Like Post:
  #7  
Old 04-02-2021, 06:48 PM
lihpster lihpster is offline
Member
A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths  
Join Date: Jan 2021
Location: Portland, OR
Posts: 674
Likes: 1,306
Liked 1,586 Times in 484 Posts
Default

Hell, around here it would just be nice to go into a store and see a handgun. Any handgun. Talked with my LGS. They have room to display 285 handguns. They have 22. 19 autos and 3 revolvers. And no idea when they will get more. Won't even take an order for a new Smith because they already have standing orders with all their distributors. So now, I'm gonna have to hunt for what I want. And since what I want is popular, gonna have to be Johnny on the spot to find one. Or go online to the auctions and pay a fortune.
__________________
Watch your topknot!
Reply With Quote
The Following User Likes This Post:
  #8  
Old 04-02-2021, 07:49 PM
S&W Fan S&W Fan is offline
Member
A bunch of really ugly Smiths  
Join Date: May 2004
Location: Colorado
Posts: 3,165
Likes: 3,246
Liked 6,247 Times in 1,375 Posts
Default

Quote:
Originally Posted by HOUSTON RICK View Post
Are they priced accordingly and function without rust?

The 66 snub with old Safariland grips was $620, the one with beat to hell service stocks was $630 LOL. I asked how firm the prices were and was told they were firm. All the "desirable" models were priced in the mid to high $600s, they also had a 6" Python for $2500.
Reply With Quote
  #9  
Old 04-02-2021, 10:11 PM
Sistema1927's Avatar
Sistema1927 Sistema1927 is online now
US Veteran
A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths  
Join Date: Dec 2003
Location: "Land of Disenchantment"
Posts: 2,302
Likes: 2,241
Liked 5,882 Times in 1,665 Posts
Default

I stopped into the Albuquerque Sportsman's Warehouse today. Nada.

Also, nada on just about any ammunition except a couple of odd boxes of .338 and 7x64. Not a round of .22, not a shotshell, nothing, nada, zip, zilch. No components either. I expected it to be bad, but not that bad. Good thing I didn't need anything.
__________________
Only a cold warrior
Reply With Quote
  #10  
Old 04-07-2021, 02:58 PM
B.Thomas B.Thomas is offline
Member
A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths  
Join Date: Mar 2021
Location: Salt Lake City
Posts: 12
Likes: 15
Liked 35 Times in 9 Posts
Default

I purchased a 686 from Sportmans a month or so ago and it was rough but I knew it was special because of the square but frame.
Needed stocks and screws and a rear sight blade and an ejector rod and lots of work to remove the abuse it went through.
Itís a 686 no dash 1985 serial number.
Mystery pistol for sure but Iím not interested in spending $100 to paper it.
Into the entire project $730

Also bought a 10-7 while I was there. It was rough but cleaned up nicely.
Attached Thumbnails
A bunch of really ugly Smiths-image-jpg  

Last edited by B.Thomas; 04-08-2021 at 12:44 AM.
Reply With Quote
The Following 4 Users Like Post:
  #11  
Old 04-07-2021, 06:35 PM
Justamessenger Justamessenger is offline
Member
A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths  
Join Date: Jun 2017
Posts: 55
Likes: 14
Liked 26 Times in 19 Posts
Default How about before and after pics on both guns?

Quote:
Originally Posted by B.Thomas View Post
I purchased a 686 from Sportmans a month or so ago and it was rough but I knew it was special because of the square but frame.
Needed stocks and screws and a rear sight blade and an ejector rod and lots of work to remove the abuse it went through.
Itís a 686 no dash 1986 serial number.
Mystery pistol for sure but Iím not interested in spending $100 to paper it.
Into the entire project $730

Also bought a 10-7 while I was there. It was rough but cleaned up nicely.
Supplies of good used guns have dries up, and Iím ready to learn.
Reply With Quote
  #12  
Old 04-07-2021, 11:26 PM
B.Thomas B.Thomas is offline
Member
A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths  
Join Date: Mar 2021
Location: Salt Lake City
Posts: 12
Likes: 15
Liked 35 Times in 9 Posts
Default

Quote:
Originally Posted by Justamessenger View Post
Supplies of good used guns have dries up, and Iím ready to learn.
Hereís the 10-7 (1979) before and after.
Had a considerable amount of rust on it and the stocks were filthy.
I stripped it down and soaked it in mineral spirits and then scrubbed it with 0000 steel wool, then scrubbed the rough areas with a brass brush then blew everything dry and polished it with motherís wheel polish.
Attached Thumbnails
A bunch of really ugly Smiths-14bab43f-6f17-4c4c-bbfc-33a569d8cffb-jpg   A bunch of really ugly Smiths-ee42c87c-1d03-40ff-a990-e14dbbd635b2-jpg   A bunch of really ugly Smiths-7ff94b86-65b2-40e1-9387-73d2d9bee8fd-jpg   A bunch of really ugly Smiths-159306a5-01d7-430e-8bc1-edca4bd1b355-jpg  
Reply With Quote
The Following 3 Users Like Post:
  #13  
Old 04-07-2021, 11:36 PM
jframejoey jframejoey is offline
Member
A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths  
Join Date: Jan 2013
Location: New England
Posts: 1,229
Likes: 4,370
Liked 869 Times in 427 Posts
Default

B. Thomas, your 686 started out with a longer tube and someone put a 2.5 barrel on it. You can tell where the sight leaf, barrel and frame come together. On a factory 2.5 the leaf runs to the end of the frame and mates up with the ramp of the front sight.
Reply With Quote
  #14  
Old 04-08-2021, 12:18 AM
B.Thomas B.Thomas is offline
Member
A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths  
Join Date: Mar 2021
Location: Salt Lake City
Posts: 12
Likes: 15
Liked 35 Times in 9 Posts
Default

Quote:
Originally Posted by jframejoey View Post
B. Thomas, your 686 started out with a longer tube and someone put a 2.5 barrel on it. You can tell where the sight leaf, barrel and frame come together. On a factory 2.5 the leaf runs to the end of the frame and mates up with the ramp of the front sight.
You are correct. I have been looking for the longer leaf for it to make it more proper.
If it has been through a barrel swap, itís the nicest work Iíve ever seen. The alignment is factory quality.
Now the Book says the 686 came in 2.5 in both round and square butt? I have scoured the net and canít find proof of that statement other than this pistol. Did smith in fact not make the 2.5 in square butt and not 2.5 in pre dash production?

It would be nice to know what itís been through and whatís been done to it. It is a no dash and has no ďMĒ mark for the service recall. Hereís some pictures of it.
Attached Thumbnails
A bunch of really ugly Smiths-3c9712b0-746a-4df1-b2c2-ea70ca34850a-jpg   A bunch of really ugly Smiths-ed036281-a312-4663-b1e6-392aaf429a8d-jpg   A bunch of really ugly Smiths-a2fca97d-6b7f-4d6a-b5b2-19670a504d2a-jpg  

Last edited by B.Thomas; 04-08-2021 at 12:43 AM.
Reply With Quote
The Following 2 Users Like Post:
  #15  
Old 04-08-2021, 12:40 AM
Ray1970's Avatar
Ray1970 Ray1970 is online now
Member
 
Join Date: Mar 2009
Location: Denver, CO
Posts: 760
Likes: 548
Liked 1,143 Times in 384 Posts
Default

Frankegun or not, that thing is a beauty.
Reply With Quote
The Following 2 Users Like Post:
  #16  
Old 04-08-2021, 02:09 AM
Czechvar Czechvar is offline
US Veteran
A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths  
Join Date: Mar 2015
Location: Minnesota
Posts: 434
Likes: 570
Liked 780 Times in 259 Posts
Default

The Sportsmanís Warehouse in Coon Rapids MN briefly had new 629 PCís ďin stockĒ for $999.99 on Apr 2nd...Which is good these days. I ordered and paid online immediately...the next day the status changed to ďPending ShipmentĒÖwhich it still is today.

The original order said I should expect to pick it up in the store on the 12th. First time buying from them, so weíll see how it goes.

Last edited by Czechvar; 04-08-2021 at 02:12 AM.
Reply With Quote
  #17  
Old 04-08-2021, 09:32 AM
ladder13 ladder13 is offline
Member
A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths A bunch of really ugly Smiths  
Join Date: Jul 2005
Location: NC
Posts: 24,686
Likes: 35,802
Liked 36,106 Times in 11,894 Posts
Default

How ugly was that 581?
__________________
In memory of Labworm
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Boy, I think this is ugly. Art Doc Smith & Wesson Semi-Auto Pistols 15 04-08-2019 07:05 AM
My ugly 39-2 kennethg Smith & Wesson Semi-Auto Pistols 23 03-03-2018 01:08 AM
Just eyeballed a whole bunch of current production Smiths Mr.Harry S&W Revolvers: 1980 to the Present 26 07-02-2016 08:39 PM
I'm fat and ugly... Gunslinger808 The Lounge 17 06-14-2012 05:41 PM
WITHDRAWNSeveral Smiths for sale and a hi standard, 2 Smiths added 7/25 greystonedog GUNS - For Sale or Trade 10 08-03-2011 04:45 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 09:59 AM.


Search Engine Optimisation provided by DragonByte SEO v2.0.42 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)