Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Revolvers > S&W Revolvers: 1980 to the Present
o

Notices

S&W Revolvers: 1980 to the Present All NON-PINNED Barrels, the L-Frames, and the New Era Revolvers


Reply
 
Thread Tools Display Modes
  #1  
Old 06-25-2009, 01:29 PM
oldogy oldogy is offline
US Veteran
442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure  
Join Date: Jun 2009
Location: W. central FL
Posts: 114
Likes: 24
Liked 7 Times in 4 Posts
Default 442 Lock Failure

New to the forum, not new to S&W as I've owned a model 28 in 357 for a long time.
I recently purchased new, a 442 airweight with the lock. It will be the wife's legal CC piece. I hear lots of horror stories about the lock and problems, locking by itself. This 442 has never, since we've owned, been locked intentionally by either of us. I will never intentionally lock this gun. We've fired a couple hundred rounds of regular ammunition through it with no problems. Have not fired +P.
Question: Has there been any documentation of a J frame with lock actually locking on its own? Or is this just talk?
Thanks for any actual reports.
I would think if this is actually a problem Smith would be working on a recall as the liability would be unbelievable. So, fact or fiction
Thanks,
oldogy

Last edited by oldogy; 06-25-2009 at 02:59 PM.
Reply With Quote
  #2  
Old 06-25-2009, 01:54 PM
Fulton722 Fulton722 is offline
Member
442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure  
Join Date: Oct 2008
Location: South-Central PA
Posts: 49
Likes: 34
Liked 61 Times in 18 Posts
Default

Quote:
Originally Posted by oldogy View Post
... I would think if this is actually a problem Smith would be working on a recall as the liability would be unbelievable. ...
To place a liability issue on S&W, you would have to PROVE that you didn't lock the gun yourself . . . and how are you going to do that?
Reply With Quote
  #3  
Old 06-25-2009, 02:58 PM
oldogy oldogy is offline
US Veteran
442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure  
Join Date: Jun 2009
Location: W. central FL
Posts: 114
Likes: 24
Liked 7 Times in 4 Posts
Default

Quote:
Originally Posted by Fulton722 View Post
To place a liability issue on S&W, you would have to PROVE that you didn't lock the gun yourself . . . and how are you going to do that?
One way would be for a defensive situation where shots had been fired from the gun, the gun was found locked in the shooters hands or close by. God, let us hope that never happens to a GG. My original question still stands. Any reports with credence of a self locking problem on these guns. I am not interested in where some ones brothers second cousin twice removed thought he had a problem.
thanks,
oldogy
Reply With Quote
  #4  
Old 06-25-2009, 03:16 PM
USAF385's Avatar
USAF385 USAF385 is offline
US Veteran
442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure  
Join Date: Apr 2009
Location: NEPA Endless Mountains
Posts: 3,919
Likes: 561
Liked 2,190 Times in 754 Posts
Default

I have had ILs and had no issue. My 642 does NOT have a lock though. My father has a 642 with lock for many years.. many rounds of standard and +P put through it.. NO issues. I don't have any first hand problems with it, nor do I actually know anyone who has.

That being said, I did remove my father's lock from his 642 two nights ago.
http://www.youtube.com/watch?v=RVPYgohVCNM
This video is of a 640 I believe, but it helped me remove the lock from his 642 in under 10 minutes.

Have there been actual locks: fact.
__________________
- The Federalist #46 -
Reply With Quote
  #5  
Old 06-25-2009, 03:38 PM
JAREDSHS's Avatar
JAREDSHS JAREDSHS is offline
Member
442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure  
Join Date: Nov 2003
Location: Scott county,Tennessee
Posts: 1,030
Likes: 358
Liked 636 Times in 375 Posts
Default

have owned 7 S&W's in the last8 years-all with the I.L. Never a problem with any of them.
One was a 625 that I carried on LE duty. One was a 64 snub, the other were a combination
of 637,638,642 and 442 Airweights. Wife and I still carry a 637 and 442..NEVER a single
malfunction regarding the lock or any other part. I just do not understand all the fuss
about a feature that you don't have to use if you don't want to use it.
__________________
JAREDSHS
LEO(retired)
Reply With Quote
  #6  
Old 06-25-2009, 04:23 PM
Lee in Quartzsite's Avatar
Lee in Quartzsite Lee in Quartzsite is offline
Member
442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure  
Join Date: Dec 2004
Location: Kingman, Arizona
Posts: 2,234
Likes: 758
Liked 2,916 Times in 947 Posts
Default

USAF385...you beat me to it with the video. Although I never had a mechanical failure of my Internal Lock, I feel much better having finally removed it. I did have two mental failures where I forgot to unlock it...carried around a loaded rock for two weeks thinking it was unlocked and ready for use.
Reply With Quote
  #7  
Old 06-25-2009, 05:53 PM
handgunner356 handgunner356 is offline
Member
442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure  
Join Date: Dec 2003
Location: SE Iowa on the Mississipp
Posts: 3,137
Likes: 1
Liked 352 Times in 230 Posts
Default

It seems to me we tried to start a thread on this subject and had a total of maybe two that had actually had the lock engage. It was a sticky for awhile and I don't know if anyone can dig it up or not. Considering the number of guns with the lock in them I'm betting the failure rate is no more than the non-lock failure rate.
Reply With Quote
  #8  
Old 06-25-2009, 06:47 PM
Black_Sheep's Avatar
Black_Sheep Black_Sheep is offline
Member
442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure  
Join Date: Nov 2008
Location: Minnesota
Posts: 1,937
Likes: 1,516
Liked 1,068 Times in 348 Posts
Default

As I just posted in another thread, my Model 60 locked up while practicing double taps with 125gr .357 rounds. The hammer was partially cocked and bound up tight, the trigger was bound up as well. Clearing it was difficult because I had to manipulate the hammer and fiddle with the key while keeping the muzzle pointed downrange. If it happens again the gun will be going away.

Another member posted about how he had unknowingly locked his CCW revolver and carried it that way for several days. That's a good way to get hurt...
__________________
"Shall not be infringed"
Reply With Quote
  #9  
Old 06-25-2009, 08:38 PM
USAF385's Avatar
USAF385 USAF385 is offline
US Veteran
442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure  
Join Date: Apr 2009
Location: NEPA Endless Mountains
Posts: 3,919
Likes: 561
Liked 2,190 Times in 754 Posts
Default

Lee in Quartzsite,

Your post in a different thread actually lead me to the video. Thanks for that!

I've never had an issue.. nor has my father... but he too feels better having it out...
__________________
- The Federalist #46 -
Reply With Quote
  #10  
Old 06-25-2009, 08:56 PM
Screwball Screwball is online now
Member
442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure  
Join Date: Jun 2009
Location: ME
Posts: 381
Likes: 62
Liked 445 Times in 167 Posts
Default

Quote:
Originally Posted by handgunner356 View Post
Considering the number of guns with the lock in them I'm betting the failure rate is no more than the non-lock failure rate.
How would no-lock guns have the lock fail more frequently than the ones with locks? That is how I take your statement.

Have revolvers ever broken down? Yes, of course they have. It is a mechanical device. But the chances of a basic issue on a no-lock gun, the guns with the locks have the same chance of that happening (if you are saying more no-locks have fail, for whatever reason, then I say to compare the production numbers).

But the lock does put another set of gears that a wrench can be thrown into. I've read maybe five lock-ups, which I can't say whether or not any of those are the same you mentioned, but I saw a locked gun at the range, before being shipped back to S&W. Yes, the chances of a gun locking up in a time you need it are low, but I air on the side of caution. If I ever get down to pulling out my 642, s*** has already gone bad, and I don't need anything else coming up. That is the reason I bought a no-lock revolver (if I couldn’t get one, I would have either found an older gun, or switched to another company).
Reply With Quote
  #11  
Old 06-25-2009, 10:45 PM
handgunner356 handgunner356 is offline
Member
442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure  
Join Date: Dec 2003
Location: SE Iowa on the Mississipp
Posts: 3,137
Likes: 1
Liked 352 Times in 230 Posts
Default

Maybe not the best way to put it, but there are other failures with revolvers beside the lock. The lock has been around since when? 2004? S&W builds 50-60,000 revolvers a year, seems to me I've heard more about firing pins, cylinder bind or barrels coming off. Don't get me wrong, the lock is about the most stupid thing they could of put on a revolver. I just don't see where the FTF because of the lock is greater than any of the other causes considering the number of firearms.
Reply With Quote
  #12  
Old 06-26-2009, 12:14 AM
Katy
Junior Member
 
Posts: n/a
Default

When these snubbies are called into action, the ***** has already hit the fan.
Why have a gun that has one more thing to fail ?
Types of FTF w/o the IL:
1). Typical mechanical failure. (That can happen on ANY revolver)

Types of FTF w/ the IL:
1). Typical mechanical failure. (That can happen on ANY revolver)
2). The IL fails.
3). The user forgets to unlock the gun prior to CCW.

With the IL, Murphy's law gets 2 more chances to rear it's ugly head.


If you were to buy a fire extinguisher, would you buy the one with the safety lock or no safety lock ?
Reply With Quote
  #13  
Old 06-26-2009, 03:17 AM
5Wire's Avatar
5Wire 5Wire is offline
Member
442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure  
Join Date: Jan 2003
Location: Portsmouth NH USA
Posts: 2,454
Likes: 1,723
Liked 1,576 Times in 626 Posts
Default

Quote:
Originally Posted by Katy View Post
If you were to buy a fire extinguisher, would you buy the one with the safety lock or no safety lock ?
My fire extinguishers all have had pins which lock the levers. The pins have to be withdrawn before the extinguisher can be operated.
__________________
Bob
Reply With Quote
  #14  
Old 06-26-2009, 08:11 AM
gnf1 gnf1 is offline
Member
 
Join Date: Dec 2007
Posts: 20
Likes: 0
Liked 3 Times in 2 Posts
Default

i think that was meant to be a rhetorical question.
Reply With Quote
  #15  
Old 06-26-2009, 08:23 AM
Screwball Screwball is online now
Member
442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure  
Join Date: Jun 2009
Location: ME
Posts: 381
Likes: 62
Liked 445 Times in 167 Posts
Default

Quote:
Originally Posted by 5Wire View Post
My fire extinguishers all have had pins which lock the levers. The pins have to be withdrawn before the extinguisher can be operated.
And it should always work, correct? How pissed would you be if you had a kitchen fire, small enough to take out with an extinguisher, but were unable to get the "lock" off to use it. In turn, your whole house goes up in flames...
Reply With Quote
  #16  
Old 06-26-2009, 11:14 AM
5Wire's Avatar
5Wire 5Wire is offline
Member
442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure  
Join Date: Jan 2003
Location: Portsmouth NH USA
Posts: 2,454
Likes: 1,723
Liked 1,576 Times in 626 Posts
Default

Quote:
Originally Posted by Screwball View Post
And it should always work, correct? How pissed would you be if you had a kitchen fire, small enough to take out with an extinguisher, but were unable to get the "lock" off to use it. In turn, your whole house goes up in flames...
You don't get it, do you. That's how they're made, with the pins. They work fine.
__________________
Bob
Reply With Quote
  #17  
Old 06-26-2009, 11:25 AM
bmcgilvray's Avatar
bmcgilvray bmcgilvray is offline
SWCA Member
442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure  
Join Date: Jan 2006
Location: Texas
Posts: 3,353
Likes: 10,447
Liked 6,092 Times in 1,249 Posts
Default

All I know is that my traditional non-lock Smith & Wesson models will never fail due to a lock related issue.

The former "sticky" that was up for such a long period of time illustrated quite a few more than two revolvers siezed by locks.
Reply With Quote
  #18  
Old 06-26-2009, 11:25 AM
Katy
Junior Member
 
Posts: n/a
Default

Look, everybody knows they all have pins.
What I meant was that if there was another type of safety device added on that required a key.
Reply With Quote
  #19  
Old 06-26-2009, 11:59 AM
ImprovedModel56Fan ImprovedModel56Fan is online now
US Veteran
442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure  
Join Date: Dec 2002
Location: MA
Posts: 7,330
Likes: 7,502
Liked 5,556 Times in 2,547 Posts
Default

Quote:
Originally Posted by Screwball View Post
And it should always work, correct? How pissed would you be if you had a kitchen fire, small enough to take out with an extinguisher, but were unable to get the "lock" off to use it. In turn, your whole house goes up in flames...
House going up in flames, while unfortunate, is possibly less serious than a revolver locking up after one shot.

OP: There have been more than two lock failures. None of them happened to me (probably because I removed the lock from my one gun that had it). Believe it or don't.

You can do whatever you want, but when I see good pre-lock revolvers selling for less than new IL revolvers, I consider the decision a no-brainer for a carry gun.

I may not always be right, but I'm never in doubt.
Reply With Quote
  #20  
Old 06-26-2009, 12:24 PM
bubbajoe45's Avatar
bubbajoe45 bubbajoe45 is offline
Member
442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure  
Join Date: Mar 2009
Location: East TN
Posts: 940
Likes: 173
Liked 343 Times in 85 Posts
Default

Quote:
Originally Posted by Model520Fan View Post
House going up in flames, while unfortunate, is possibly less serious than a revolver locking up after one shot.

OP: There have been more than two lock failures. None of them happened to me (probably because I removed the lock from my one gun that had it). Believe it or don't.

You can do whatever you want, but when I see good pre-lock revolvers selling for less than new IL revolvers, I consider the decision a no-brainer for a carry gun.

I may not always be right, but I'm never in doubt.
Less serious? . . . unless you didn't make your first shot count; what if all your no-lock revolvers were in your house and you didn't have a fire-proof safe . . . with a lock on it? Sorry to be a smart aleck . . . I couldn't resist.

More seriously, I agree with your point - when one considers unneccessarily more complicated mechanical devices that cost more to do the same job, the decision is easily made. The dilemma for me has been weighing that cool technology factor called Scandium against the workmanship I see and feel in the older guns. At the end of the day though, I am not in doubt either - I'll tote the weight, I'll bear the load.
Reply With Quote
  #21  
Old 06-26-2009, 03:28 PM
Katy
Junior Member
 
Posts: n/a
Default

The late Jeff Cooper would have said, "The IL is a solution for a non-existent problem."
Reply With Quote
  #22  
Old 06-26-2009, 03:56 PM
bubbajoe45's Avatar
bubbajoe45 bubbajoe45 is offline
Member
442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure  
Join Date: Mar 2009
Location: East TN
Posts: 940
Likes: 173
Liked 343 Times in 85 Posts
Default

Quote:
Originally Posted by Katy View Post
The late Jeff Cooper would have said, "The IL is a solution for a non-existent problem."
Well said.
Reply With Quote
  #23  
Old 06-26-2009, 04:41 PM
rjh rjh is offline
Member
442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure  
Join Date: Mar 2009
Location: Central Texas
Posts: 63
Likes: 0
Liked 2 Times in 2 Posts
Default IL firearms

I just received my first. It is a Classic Model 22 in .45acp. Is it very difficult to remove the IL device? I have placed the shim in 80 series Colt Gov't models in the past. I have not torn into the IL revolver yet.

I had rather have the old style and do have a 4" 1950 M&P .44 special. I will use it when I want, but rather shoot the more modern revolver on a regular basis.

This new pistol is very tight, the factory did an excellent job on bluing. I like it, but have not had a chance to fire it as yet.

Does anyone know if a new type 45 long colt cylinder can be fitted without a lot of problem to the revolver. I called and talked with a factory service rep. He said the factory does not do this anymore. Any comments appreciated, Bob in Texas
Reply With Quote
  #24  
Old 06-26-2009, 09:02 PM
Screwball Screwball is online now
Member
442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure  
Join Date: Jun 2009
Location: ME
Posts: 381
Likes: 62
Liked 445 Times in 167 Posts
Default

Quote:
Originally Posted by 5Wire View Post
You don't get it, do you. That's how they're made, with the pins. They work fine.
I guess you don't get it, being it is far from a pin on a fire extinguisher... if it was, the revolvers would resemble a grenade with a pin to pull, not having a half dozen additional parts that work by inserting a key.

Good, keep your locked guns. I don't care. I will not buy another S&W revolver that has a lock. Unless they do a no-lock run of 625s, I'll either buy a used one or opt for something else from another company (I don't see a good .45 ACP revolver, so I might just go with another autoloader).
Reply With Quote
  #25  
Old 06-26-2009, 09:29 PM
5Wire's Avatar
5Wire 5Wire is offline
Member
442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure 442 Lock Failure  
Join Date: Jan 2003
Location: Portsmouth NH USA
Posts: 2,454
Likes: 1,723
Liked 1,576 Times in 626 Posts
Default

Quote:
Originally Posted by Katy View Post
Look, everybody knows they all have pins.
What I meant was that if there was another type of safety device added on that required a key.
Oh, I see. I didn't see that part.
__________________
Bob
Reply With Quote
Reply

Tags
442, 45acp, 637, 640, 642, airweight, ccw, colt, j frame, lock, model 28, model 60, model 625, scandium, snubnose

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Slide Lock failure Kevin G Smith & Wesson Semi-Auto Pistols 3 10-30-2014 04:21 PM
New 15-22 MOE Failure to lock skiphreak Smith & Wesson M&P 15-22 8 09-16-2012 10:56 PM
S&W Lock Failure? rug357 S&W Revolvers: 1980 to the Present 45 01-08-2010 08:33 PM
Lock failure? rpg0123 S&W Revolvers: 1980 to the Present 25 12-16-2009 04:02 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 08:28 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)