|
|
05-30-2013, 06:08 AM
|
Member
|
|
|
Join Date: Mar 2005
Location: Upstate NY
Posts: 4
Likes: 0
Liked 0 Times in 0 Posts
|
|
Silicone lubricant
Has anyone tried silicone lubricant on the internals of a pistol or revolver? Does it gum up or attract dust and lint?
Thanks,
Keith
|
05-30-2013, 08:37 AM
|
|
Member
|
|
|
Join Date: May 2012
Location: Evansville, Indiana USA
Posts: 6,204
Likes: 480
Liked 11,335 Times in 3,505 Posts
|
|
silicone and other synthetics
I've used "Gunk" brand silicone based spray lubricant (no longer available) and products called "Super Lube Dry Film" and "Liquid Wrench" dry lubricant spray (PTFE) for years. These lubricants have a liquid carrier that evaporates and leaves a dry film. Also, a company called "Finish Line" makes several synthetic lubes that are very good. I use these in my service guns in the winter, when outdoor temperatures get lower. They don't "thicken" like traditional oils can during exposure to extreme cold, and they don't collect dirt and dust when used properly. You do have to pay attention to the label warnings concerning harm to some plastics and wood finishes. The big drawback is the carriers in the sprays are quite volatile, and the silicones and other chemicals can get absorbed through the skin.
__________________
Ret. LE, FA Instr, S&W Armorer
|
05-30-2013, 09:05 AM
|
Member
|
|
|
Join Date: Nov 2012
Posts: 1,787
Likes: 179
Liked 1,550 Times in 685 Posts
|
|
That stuff goes everywhere. It seems like it would make your firearm really slippery, if you applied it via a spray can (which is how I usually see silicone lubricant delivered). The last time I used silicone spray in the house, some of it got on the wood floor. My wife nearly killed herself, skating by in socks. It's like laying down an ice rink! Food for thought.
|
05-30-2013, 09:12 AM
|
|
Member
|
|
|
Join Date: Feb 2005
Location: On da Bayou Teche
Posts: 18,407
Likes: 18,440
Liked 58,599 Times in 9,622 Posts
|
|
When the kids were sail boat racing we used a lot of a product called "McLube" on blocks, booms, etc. Very good product. Dries quickly and was slippery as snot. You could buy it in spray or liquid. A little went a lonnnng way.
__________________
Forum consigliere
|
05-30-2013, 09:23 AM
|
Member
|
|
|
Join Date: Aug 2007
Location: Oklahoma
Posts: 8,158
Likes: 3,605
Liked 5,199 Times in 2,172 Posts
|
|
I routinely use CRC silicone for two purposes: (caution: it is extremely flammable)
1. It is the best cleaner I have found for magazines, especially since I drop them in the dirt and sand in matches.
a. disassemble mags
b. spray
c. WIPE DRY
d. reassemble
2. Rather than use a harsh stripper, I use CRC silicone to clean and lightly lube the polymer parts inside frames. BEWARE the thick gummy silicone sprays sold under other brands. CRC mostly evaporates, leaving a light white powder. Wipe out excess right after spraying.
If you get CRC silicone on the outside of your pistol, just wipe off with a rag dampened with Windex and it comes right off.
I DO NOT recommended CRC Silicone spray as a lubricant for metal parts inside a pistol. RTFM for manufacturers directions.
__________________
Science plus Art
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
|
|
|
|
All times are GMT -4. The time now is 04:33 PM.