What's a good tool to move the front sight on a Shield I have a universal P500 sight mover from Brownel won't budge.
Need Help.

Good solid vise, big hammer and a punch. I used a big steel punch and a mid-weight hammer, it was in there for sure! Make sure you're going the correct direction too, it should come out on the ejection port side

The rear sight was in mine almost as tight. (after loosening the set screw) it took several blows with a 16 oz hammer behind the punch to get it to move.

__________________
H Richard
SWCA1967 SWHF244

You might want to try something like this.
http://smith-wessonforum.com/accesso...5-shipped.html