Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Ammunition-Gunsmithing > S&W-Smithing
o

Notices

S&W-Smithing Maintenance, Repair, and Enhancement of Smith & Wesson and Other Firearms.


Reply
 
Thread Tools Display Modes
  #1  
Old 12-03-2016, 12:06 PM
Aircrewman Aircrewman is offline
SWCA Member
Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27  
Join Date: Jan 2009
Location: Sutherlin, Oregon
Posts: 999
Likes: 551
Liked 817 Times in 417 Posts
Default Cylinder indexing problem with Model 27

A friend has a 6" model 27 from the mid-seventies that he wants to sell. I am contemplating the purchase but the gun has a problem and I am hoping to get some help deciding if I should buy it or not but this problem with the cylinder is question mark....

The cylinder rotates correctly but on two of the cylinder charge holes the indexing tightens and seems to slow (like it has a "hitch") and the trigger pull becomes harder. While it will lock in to battery and fire correctly it is not right. The gun hadn't been fired much over the years and it hasn't been abused. But, as I noted, the gun works but it is rather disconcerting to have this stiff trigger pull.... Don't want to buy a problem gun and don't know how much it will cost to make right. Especially since the factory is not really willing/able to repair...

I have lubed the mechanism, it does not have crud under the extractor star, no powder flakes anywhere. It rotates perfectly on 4 of the cylinder holes. It just seems like it wants to stop on two charge holes, although it doesn't but it is exasperating to have this happen. I seem to remember this on some other guns of this manufacturing period by S&W...

Any thoughts from the 'smiths and experts?
Reply With Quote
The Following User Likes This Post:
  #2  
Old 12-03-2016, 12:22 PM
Protocall_Design Protocall_Design is offline
Vendor
Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27  
Join Date: Jan 2010
Location: Kansas City area
Posts: 6,129
Likes: 53,433
Liked 13,435 Times in 4,240 Posts
Default

Two of the ratchets are wider than the rest. On these 2, the hand is binding between the ratchet and the frame at the end of the trigger pull. They will wear in over time with enough use, or can be filed to fit.

Filing ratchets is not for the inexperienced. It takes a skilled and practiced hand. There is a very fine line between not enough and too much. A good revo smith can do it in a few minutes. A poor one can ruin it in a few minutes.
Reply With Quote
The Following 7 Users Like Post:
  #3  
Old 12-03-2016, 12:34 PM
armorer951's Avatar
armorer951 armorer951 is offline
Member
Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27  
Join Date: May 2012
Location: Evansville, Indiana USA
Posts: 6,203
Likes: 480
Liked 11,333 Times in 3,505 Posts
Default

Agree with the possibility of long ratchets.......could also be an issue with the interface between the extractor rod and the front locking bolt. Improper fit, or the extractor rod has some runout, (is not straight) which can cause the cylinder to bind.
__________________
Ret. LE, FA Instr, S&W Armorer

Last edited by armorer951; 12-03-2016 at 01:52 PM.
Reply With Quote
The Following 2 Users Like Post:
  #4  
Old 12-03-2016, 01:50 PM
Lee's Landing Billy Lee's Landing Billy is offline
Banned
Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27  
Join Date: Mar 2014
Location: Battery Oaks Range, S.C.
Posts: 1,847
Likes: 5,663
Liked 3,574 Times in 1,163 Posts
Default

Cylinder could be scrubbing on the forcing cone a TINY bit right there.
Reply With Quote
The Following User Likes This Post:
  #5  
Old 12-03-2016, 02:05 PM
scooter123 scooter123 is offline
Member
 
Join Date: Jan 2009
Location: Metro Detroit, Michigan
Posts: 6,919
Likes: 179
Liked 4,294 Times in 2,106 Posts
Default

IMO Toolguy has made the correct diagnoses. Depending on the price I would consider purchasing this model 27 AFTER contacting S&W to see what repairing this condition would cost. I'll also note that Toolguy is 100% correct about it being extremely simple to get this repair WRONG and many gunsmiths today are so unfamiliar with revolvers that most of them won't even be able to identify the pawl on the extractor star that needs to be tuned. Quite simply DO NOT rely on some local "gunsmith" to do this repair, it take a real expert and nowadays most of those are working at S&W.
Reply With Quote
  #6  
Old 12-03-2016, 03:17 PM
jimmyj's Avatar
jimmyj jimmyj is offline
Member
Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27  
Join Date: May 2003
Location: DUNNELLON, FLORIDA USA
Posts: 11,102
Likes: 1,690
Liked 16,300 Times in 4,231 Posts
Default

1. Check the ejector rod to determine if it is straight and true
2. check the spaces between the front of the cylinder and rear of forcing cone on each chamber.
Reply With Quote
The Following User Likes This Post:
  #7  
Old 12-03-2016, 03:18 PM
Aircrewman Aircrewman is offline
SWCA Member
Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27  
Join Date: Jan 2009
Location: Sutherlin, Oregon
Posts: 999
Likes: 551
Liked 817 Times in 417 Posts
Default

Thank you very, very much fellas! This is the answers that I was hoping to receive! The revolver is otherwise in really nice condition. Now the next issue is finding the competent gunsmith to fix the problem...... I am hoping that Smith and Wesson will accept the gun. If they don't I will have to scramble some. In the past, I think Cylinder and Slide worked on Smith and Wesson revolvers but I guess I'll have to call. There's a fellow in Phoenix, Arizona who is supposed to be very good on Smith revolvers too....
Then there's the cost.....
Thanks again to all who have responded with information on how to have this issue addressed!

Last edited by Aircrewman; 12-03-2016 at 03:20 PM.
Reply With Quote
  #8  
Old 12-03-2016, 04:32 PM
Alk8944's Avatar
Alk8944 Alk8944 is offline
Member
Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27  
Join Date: Jan 2007
Location: Sandy Utah
Posts: 8,615
Likes: 1,554
Liked 8,602 Times in 3,450 Posts
Default

Aircrewmember,

The only thing that would show the symptoms you describe is fitting of the ratchet. Neither the cylinder dragging on the barrel extension, nor a slightly bent extractor rod has any effect on trigger pull, only the hand/ratchet fit.

Just use the gun a bit. Sit in front of the TV and cock the gun and let the hammer down a few hundred times and it will fix itself. Won't cost you $100-200 for UPS to/from S&W, and you won't be without the gun for 2-3 months!

Note I did not say dry-fire the gun! Just cock it, hold the hammer with your thumb and pull the trigger and let the hammer down. This does everything dry-firing does except put shock stress on the parts that can lead to premature failure of the frame studs, hammer nose and hammer nose rivet!
__________________
Gunsmithing since 1961

Last edited by Alk8944; 12-03-2016 at 04:35 PM.
Reply With Quote
  #9  
Old 12-03-2016, 04:43 PM
armorer951's Avatar
armorer951 armorer951 is offline
Member
Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27  
Join Date: May 2012
Location: Evansville, Indiana USA
Posts: 6,203
Likes: 480
Liked 11,333 Times in 3,505 Posts
Default

^^^
The front of the cylinder dragging on the forcing cone ("barrel extension") has no effect on trigger pull ???? What?
__________________
Ret. LE, FA Instr, S&W Armorer

Last edited by armorer951; 12-03-2016 at 06:27 PM.
Reply With Quote
The Following 2 Users Like Post:
  #10  
Old 12-03-2016, 05:02 PM
Protocall_Design Protocall_Design is offline
Vendor
Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27  
Join Date: Jan 2010
Location: Kansas City area
Posts: 6,129
Likes: 53,433
Liked 13,435 Times in 4,240 Posts
Default

The cylinder dragging on the barrel can make the trigger pull MUCH heavier. How much depends on some variables.
Reply With Quote
The Following User Likes This Post:
  #11  
Old 12-03-2016, 06:11 PM
steelslaver's Avatar
steelslaver steelslaver is online now
US Veteran
Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27  
Join Date: Oct 2013
Location: Central Montana
Posts: 13,622
Likes: 12,737
Liked 39,085 Times in 9,965 Posts
Default

Thing is it is easy to Check B/C gap, also fairly easy to check ejector run out. Always check and eliminate the easy, cheap stuff first. True that cylinder drag usually don't cause trigger to stage, but it sure will cause a hard trigger.

Last edited by steelslaver; 12-03-2016 at 08:05 PM.
Reply With Quote
The Following 2 Users Like Post:
  #12  
Old 12-03-2016, 06:12 PM
Tom S.'s Avatar
Tom S. Tom S. is offline
Moderator
Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27  
Join Date: Nov 2015
Location: SE Michigan
Posts: 18,473
Likes: 8,386
Liked 17,058 Times in 5,593 Posts
Default

I not only think Toolguy has nailed the problem, but I also suspect the gun has been like this since leaving the factory and wasn't fired enough by the original owner to notice, or he ignored it hoping it would go away on it's own. I see no reason why S&W wouldn't work on it, but as has been pointed out, there are a number of other places that will also take care of it. If it's as I suspect, S&W might even fix it for free.
__________________
So many S&W's, so few funds!!
Reply With Quote
The Following User Likes This Post:
  #13  
Old 12-03-2016, 06:46 PM
Alk8944's Avatar
Alk8944 Alk8944 is offline
Member
Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27  
Join Date: Jan 2007
Location: Sandy Utah
Posts: 8,615
Likes: 1,554
Liked 8,602 Times in 3,450 Posts
Default

Quote:
Originally Posted by armorer951 View Post
^^^
The front of the cylinder dragging on the forcing cone ("barrel extension") has no effect on trigger pull ???? What?
So I should have said single-action trigger pull! OP wouldn't have even mentioned the trigger pull difference if he had been talking about double-action. I thought that would have been obvious from his description!

And while we are at it let's talk about nomenclature! The forcing cone is the tapered inner surface (conical) leading from the extreme breech end of the barrel to the rifling. There is no way that the cylinder can drag on the forcing cone, or even contact it! It can touch the face of the barrel extension.

If those of us who so, or should, know better about correct nomenclature, and used it (!), then maybe we could get others to know correct nomenclature instead of perpetuating errors! The excuse that "they will know what I meant anyway" simply doesn't cut it. Would it have worked with your teachers in grade and high school? I doubt it!
__________________
Gunsmithing since 1961

Last edited by Alk8944; 12-03-2016 at 06:48 PM.
Reply With Quote
  #14  
Old 12-03-2016, 07:31 PM
armorer951's Avatar
armorer951 armorer951 is offline
Member
Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27  
Join Date: May 2012
Location: Evansville, Indiana USA
Posts: 6,203
Likes: 480
Liked 11,333 Times in 3,505 Posts
Default

Quote:
Originally Posted by Alk8944 View Post
So I should have said single-action trigger pull! OP wouldn't have even mentioned the trigger pull difference if he had been talking about double-action. I thought that would have been obvious from his description!

And while we are at it let's talk about nomenclature! The forcing cone is the tapered inner surface (conical) leading from the extreme breech end of the barrel to the rifling. There is no way that the cylinder can drag on the forcing cone, or even contact it! It can touch the face of the barrel extension.

If those of us who so, or should, know better about correct nomenclature, and used it (!), then maybe we could get others to know correct nomenclature instead of perpetuating errors! The excuse that "they will know what I meant anyway" simply doesn't cut it. Would it have worked with your teachers in grade and high school? I doubt it!
Thanks for the lecture and for pointing out my errors in "nomenclature" in the past and again today. I should know better. I'm sorry......I'll try to use better nomenclature in the future. I sure wouldn't want to proliferate the use of improper terminology. I was only a "C" student in college so it's no surprise I have such trouble with proper nomenclature and other important details.
I've only been at this since the mid-70's, so I still have a lot to learn. I suppose that's one of the many reasons I enjoy this forum so much.

I had no idea that the area commonly called the forcing cone, which is at the "extreme breech end of the barrel" was called the "barrel extension". My instructors at the armorer's classes always referred to it as the forcing cone. Just think, I've been using the wrong term for this part of the revolver for decades.
__________________
Ret. LE, FA Instr, S&W Armorer

Last edited by armorer951; 12-04-2016 at 08:51 PM.
Reply With Quote
The Following 7 Users Like Post:
  #15  
Old 12-03-2016, 08:10 PM
Laketime's Avatar
Laketime Laketime is offline
Member
Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27  
Join Date: Nov 2013
Location: Virginia
Posts: 3,147
Likes: 2,420
Liked 3,586 Times in 1,597 Posts
Default

This problem was common in some guns in the late 70's,and more common on guns from the 80's. The problem is annoying,and only a good gunsmith can correct it by filing the ratchets. I use to send the new guns back to Smith & Wesson to fix,but got tired of waiting 3-4 months to get them back.
Reply With Quote
  #16  
Old 12-03-2016, 10:02 PM
Aircrewman Aircrewman is offline
SWCA Member
Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27  
Join Date: Jan 2009
Location: Sutherlin, Oregon
Posts: 999
Likes: 551
Liked 817 Times in 417 Posts
Default

Again, thank yuse guys!!!!!! This is quite a learning experience.... As I explained, I saw (felt) this problem with some revolvers by Smith many years ago. It was a perplexing problem. I am concerned that the cost to have the 27 fixed will be a little problematic for getting a price from the seller. Unless the fix is to use the method offered by Alk 8944. That certainly is a way to minimize cost to repair. So, now, I am uncertain as to how I can address this issue. Of course, the gun is not in my possession so I don't know if the owner is willing to have this done and I don't know if I want to buy it and take a chance...... I think, otherwise, it is a good revolver but the problem keeps me from making an offer and I don't think I can really make an offer until the costs of fixing can be more or less set.
Reply With Quote
  #17  
Old 12-04-2016, 01:24 AM
Big Cholla Big Cholla is offline
Member
Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27  
Join Date: Jul 2008
Location: Las Vegas, NV
Posts: 3,428
Likes: 5,932
Liked 5,259 Times in 1,732 Posts
Default BUY IT!

Quote:
Originally Posted by Aircrewman View Post
Again, thank yuse guys!!!!!! This is quite a learning experience.... As I explained, I saw (felt) this problem with some revolvers by Smith many years ago. It was a perplexing problem. I am concerned that the cost to have the 27 fixed will be a little problematic for getting a price from the seller. Unless the fix is to use the method offered by Alk 8944. That certainly is a way to minimize cost to repair. So, now, I am uncertain as to how I can address this issue. Of course, the gun is not in my possession so I don't know if the owner is willing to have this done and I don't know if I want to buy it and take a chance...... I think, otherwise, it is a good revolver but the problem keeps me from making an offer and I don't think I can really make an offer until the costs of fixing can be more or less set.
Buy it! It really isn't that big of deal. The inference above is that it is such a difficult job that only a select few of the anointed ones will know how to do it correctly............ IMHO, most qualified S&W Armorers will know how to identify the chambers therefore the extractor bosses to be filed on and can have the job done in under 30 minutes. Of course any pistolsmith worth their salt will do a complete armorer's check on all the related 'correct' functions of a S&W revolver.

And, If YOU are mechanically inclined, buy Jerry Kuhnhausen's book, "The S&W Revolvers, A Shop Manual" and do it yourself. Just expect to purchase a few tools and gauges. ............ Brownell's is your friend.
Reply With Quote
The Following User Likes This Post:
  #18  
Old 12-20-2016, 02:34 PM
Lee's Landing Billy Lee's Landing Billy is offline
Banned
Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27  
Join Date: Mar 2014
Location: Battery Oaks Range, S.C.
Posts: 1,847
Likes: 5,663
Liked 3,574 Times in 1,163 Posts
Default

Note to self..There's a man in Utah that goes OFF when he hears "forcing cone". Be sure to use it when possible...HehHehHehHehHeh
Reply With Quote
  #19  
Old 12-20-2016, 02:39 PM
armorer951's Avatar
armorer951 armorer951 is offline
Member
Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27  
Join Date: May 2012
Location: Evansville, Indiana USA
Posts: 6,203
Likes: 480
Liked 11,333 Times in 3,505 Posts
Default

Another note to self........I should always remember what Former Sen. Alan Simpson (R-Wyoming) once said , “Those who travel the high road of humility will not be troubled by heavy traffic.”
__________________
Ret. LE, FA Instr, S&W Armorer
Reply With Quote
The Following 5 Users Like Post:
  #20  
Old 12-21-2016, 04:17 AM
BLUEDOT37's Avatar
BLUEDOT37 BLUEDOT37 is offline
Member
Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27  
Join Date: Dec 2012
Location: N.E. OKLA.
Posts: 6,460
Likes: 5,857
Liked 9,263 Times in 3,478 Posts
Default

Quote:
Originally Posted by Aircrewman View Post

...the trigger pull becomes harder.
...this stiff trigger pull
The gun hadn't been fired much over the years...
Maybe I'm missing it but the stiff trigger you're feeling, is that when you're pulling the trigger DA?

Do you feel it's hard to cock the hammer, SA only, on those to chambers?

Does the cylinder spin freely with the cylinder open?

Have to removed the cylinder from the yoke barrel & cleaned it thoroughly?

I've had several occasions, with different revolvers, that would cock fine on most chambers but feel stiff & slow on others. After cleaning the yoke barrel thoroughly it would cock uniformly smooth again.

Can you clarify?

.
__________________
Waiting for the break of day
Reply With Quote
  #21  
Old 12-26-2016, 12:09 AM
Aircrewman Aircrewman is offline
SWCA Member
Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27  
Join Date: Jan 2009
Location: Sutherlin, Oregon
Posts: 999
Likes: 551
Liked 817 Times in 417 Posts
Default

BLUEDOT37,
Yes..... stiff trigger pull double action very noticeable. Single action is stiff also, perhaps a little less difficult but noticeable. Hammer stiff to cock on affected charge holes...two of them as noted.

Cylinder does spin freely. Haven't taken sideplate off to clean action... Not my gun and not certain my friend is desirous of me doing this...
I too have had a few revolvers with similar problems. Sold for other things over the years....fortunately, I have had many more that have been trouble free! Still haven't made a deal for this gun. I think that my friend wants to sell it for top dollar so I am not certain about actually being able to obtain this one.....
Reply With Quote
  #22  
Old 12-26-2016, 01:27 AM
BLUEDOT37's Avatar
BLUEDOT37 BLUEDOT37 is offline
Member
Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27  
Join Date: Dec 2012
Location: N.E. OKLA.
Posts: 6,460
Likes: 5,857
Liked 9,263 Times in 3,478 Posts
Default

Quote:
Originally Posted by Aircrewman View Post
Yes..... stiff trigger pull double action very noticeable. Single action is stiff also, perhaps a little less difficult but noticeable. Hammer stiff to cock on affected charge holes...two of them as noted.
With the cylinder open, & the cylinder release button held back, does it cock smoothly SA & DA?

If so, you can remove the one screw that releases the yoke so you can slide it out & the cylinder off the yoke to inspect/clean it. I may be wrong but it's an easy task to eliminate something simple. You'd be surprised what some residue/debris on it can do.

.
__________________
Waiting for the break of day
Reply With Quote
  #23  
Old 12-26-2016, 06:46 AM
Aircrewman Aircrewman is offline
SWCA Member
Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27 Cylinder indexing problem with Model 27  
Join Date: Jan 2009
Location: Sutherlin, Oregon
Posts: 999
Likes: 551
Liked 817 Times in 417 Posts
Default

As soon as I can get the gun from my friend I will try the action described. Not certain that I will be able to accomplish said check soon... weather in Oregon currently not conducive to going to range.. getting to be a wimp in advancing age.... sounds like something that can be done with relative ease. Thanks for the tip.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with a 66 indexing tenntucker S&W-Smithing 7 12-11-2015 11:45 AM
J-Frame cylinder indexing fix. kraigwy S&W-Smithing 1 04-04-2013 11:17 AM
Model 29 indexing problem traub S&W-Smithing 0 05-22-2011 08:42 AM
hornady projector/lock-n-load indexing problem rp85 Reloading 15 11-26-2010 07:35 PM
Properly indexing cylinder? Glennp S&W Revolvers: 1961 to 1980 9 01-07-2010 09:03 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 08:16 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)