Smith & Wesson Forum

Go Back   Smith & Wesson Forum > >

S&W-Smithing Maintenance, Repair, and Enhancement of Smith & Wesson and Other Firearms.


Reply
 
Thread Tools Display Modes
  #1  
Old 05-04-2017, 07:40 PM
bruner1981 bruner1981 is offline
Member
Extraction issues with pre-28 Extraction issues with pre-28 Extraction issues with pre-28 Extraction issues with pre-28 Extraction issues with pre-28  
Join Date: Jun 2015
Location: Chico, CA
Posts: 454
Likes: 79
Liked 408 Times in 167 Posts
Default Extraction issues with pre-28

Good afternoon everyone. I've been having some extraction issues with my pre-28 Highway Patrolman. These are with my reloads which are within safe limits, nothing over pressure. Everything fires fine, but when I go to extract, a couple cases will extract about 0.25" and then are stuck. The cases that aren't stuck can be pulled out freely by my fingernails. The ones that are sometimes require putting the end of the extractor rod against the bench and pushing on the grip to get them free. When I try to put these spent cases back into the chambers, they go in most of the way until I feel some resistance. I can press them in all the way, and then they're hard to extract again.

At first I thought it was my reloads, until I tried them in my 27-2 and 28-2. Those two guns have no issues with these loads. The spent cases that got stuck in the pre-28 can even chamber and extract from those guns like butter. Tried them in my Rossi 92 as well, but that gun just chews through whatever I feed, no issues there.

I've spoken with the gunsmith at the shop I work at and he recommended chucking a bore brush in an electric drill and run it through the chambers to clean them of any stubborn carbon build up, but no luck yet. He also recommended some very fine abrasives to try next which I will do when I get the chance.

Has anyone else had similar issues? What would you think is wrong and what would you do to fix it?

Thanks,
Andy

SWCA #3132

Sent from my Nexus 6P using Tapatalk

Last edited by bruner1981; 05-04-2017 at 07:41 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
M&P 40 to 9mm extraction issues 7Kniazev7 Smith & Wesson M&P Pistols 4 07-11-2015 11:13 PM
Model 17 extraction issues sipowicz S&W Revolvers: 1961 to 1980 16 07-11-2013 11:34 AM
Extraction issues on a new 915 chevellemrwl Smith & Wesson Semi-Auto Pistols 7 09-24-2012 01:18 AM
New MP15-22 - Feeding/Extraction Issues? score69 Smith & Wesson M&P 15-22 42 11-29-2009 07:37 PM
M&P 15T Extraction Issues - Fix hopperb Smith & Wesson M&P15 Rifles 0 10-11-2009 03:32 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 07:01 AM.


Search Engine Optimisation provided by DragonByte SEO v2.0.42 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)