Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Ammunition-Gunsmithing > S&W-Smithing
o

Notices

S&W-Smithing Maintenance, Repair, and Enhancement of Smith & Wesson and Other Firearms.


Reply
 
Thread Tools Display Modes
  #1  
Old 08-20-2017, 09:52 PM
Toblerra Toblerra is offline
Member
Rebluing a parkerized firearm? Rebluing a parkerized firearm? Rebluing a parkerized firearm? Rebluing a parkerized firearm? Rebluing a parkerized firearm?  
Join Date: Feb 2016
Posts: 224
Likes: 88
Liked 147 Times in 71 Posts
Default Rebluing a parkerized firearm?

Hello all,

Wondering if any of you have had this done before. I'm considering shipping off a parkerized revolver to have it hot blued by Fogles Gunsmithing. I contacted them and they said that they can do it. I do not doubt their capabilities.

However, upon reading some forums it was stated that bluing a parkerized gun can ruin it because it requires a lot of sanding and or blasting to remove the parkerized finish which can effect the tolerances of the gun.

This is not a necessity for me just something I'd like to have done so long as it doesn't mess up the mechanical function of the firearm in any way. I have bead blasted my stainless colt commander and it didn't have any effect on it but that was an automatic not a revolver and it was stainless.

The revolver I'm "thinking" about having refinished is a recently purchased Manurhin MR 73. The original parkerized finish is worn off in many places, which looks cool but I'd like to refinish it to prolong its life and protect the exposed metal. Another factor is that the MR 73 is made of ordinance grade tool steel that is extremely hard compared to most other steels used to make firearms these days, so not sure how that plays into the process either. Of course I could have it reparkerized instead but frankly that would look boring compared to a reblue.

So if you have any experience/knowledge with this please let me know. Maybe there's another method of removing the parkerized finished that does not require heavy sanding?

Thanks as always for your input.

Last edited by Toblerra; 08-20-2017 at 09:55 PM.
Reply With Quote
  #2  
Old 08-21-2017, 12:30 AM
Absalom's Avatar
Absalom Absalom is offline
SWCA Member
Absent Comrade
Rebluing a parkerized firearm? Rebluing a parkerized firearm? Rebluing a parkerized firearm? Rebluing a parkerized firearm? Rebluing a parkerized firearm?  
Join Date: Jan 2014
Location: Oregon
Posts: 12,834
Likes: 10,103
Liked 27,995 Times in 8,452 Posts
Default

I'm not an expert, so if I'm mistaken, one will surely come along and correct me, but my understanding has been that the issue is not the difficult removal of the parkerizing (it actually wears off rather easily), but the fact that factory-parkerized guns were fitted with much less polishing and surface prep.

As a result, to go from a rougher-surface parkerized finish to a polished commercial blue or nickel is more difficult and labor-intensive.

However, I've come across this discussion primarily relating to military-finished guns which were minimally surface-prepped and received a parkerized or other dull utility finish as a cost-saving measure, like WW II-era Victory or Commando revolvers. For example, S&W would not offer a factory refinish of a Victory to one of the polished finishes post-war for that reason.

I have no first-hand knowledge, so this is just a guess, but I would not think this applies to a peacetime quality gun like an MR 73.

Last edited by Absalom; 08-21-2017 at 12:31 AM.
Reply With Quote
The Following User Likes This Post:
  #3  
Old 08-21-2017, 08:07 AM
murphydog's Avatar
murphydog murphydog is offline
Moderator
Rebluing a parkerized firearm? Rebluing a parkerized firearm? Rebluing a parkerized firearm? Rebluing a parkerized firearm? Rebluing a parkerized firearm?  
Join Date: Jun 2007
Posts: 26,780
Likes: 934
Liked 18,872 Times in 9,240 Posts
Default

I think there is no right (or wrong) answer, it is personal preference.

You could argue keeping the worn but original finish is best for collector value; re-Parkerizing the gun would be relatively easy and inexpensive; and if you really want a blued gun, why not? As Absalom noted, however, if the surface is not highly polished whatever bluing job is put on it will not be impressively shiny. Good luck in your decision.
__________________
Alan
SWCA LM 2023, SWHF 220
Reply With Quote
  #4  
Old 08-21-2017, 10:43 AM
chief38's Avatar
chief38 chief38 is offline
Member
Rebluing a parkerized firearm?  
Join Date: Apr 2006
Posts: 17,759
Likes: 7,835
Liked 25,615 Times in 8,661 Posts
Default

Toblerra,

I doubt anyone would be able to answer your question better than the Company who said they could successfully do the work. I would also think that if this were a problematic scenario they would tell you so and refuse the job.

I have never professed to be a "finishes" expert and I am unaware if the Parkerizing must be removed solely by abrasion or if it can be removed chemically. If it can be chemically removed I don't see why it would have to be excessively sanded and therefore should be able to be successfully Blued afterwards.

If you have faith and good reports on this Company I would accept their answers to this question. Don't forget to take before and after pic's please
Reply With Quote
  #5  
Old 08-21-2017, 11:11 AM
Triggernosis Triggernosis is offline
Member
Rebluing a parkerized firearm? Rebluing a parkerized firearm? Rebluing a parkerized firearm? Rebluing a parkerized firearm? Rebluing a parkerized firearm?  
Join Date: Jan 2008
Location: Wilson, NC
Posts: 1,286
Likes: 462
Liked 816 Times in 373 Posts
Default

And yes, they do use that term quite often on current day U.S. Navy vessels. It's simply the guy (or woman) who is in command of the vessel, regardless of rank.
Reply With Quote
  #6  
Old 08-21-2017, 11:26 AM
Watchdog Watchdog is offline
Banned
Rebluing a parkerized firearm? Rebluing a parkerized firearm? Rebluing a parkerized firearm? Rebluing a parkerized firearm? Rebluing a parkerized firearm?  
Join Date: Apr 2013
Posts: 12,572
Likes: 21,054
Liked 32,463 Times in 7,773 Posts
Default

Quote:
Originally Posted by Toblerra View Post
Wondering if any of you have had this done before. I'm considering shipping off a parkerized revolver to have it hot blued by Fogles Gunsmithing.
I'm just curious. What kind of parkerized revolver are you talking about? And why do you want to have it blued?
Reply With Quote
  #7  
Old 08-21-2017, 08:18 PM
Toblerra Toblerra is offline
Member
Rebluing a parkerized firearm? Rebluing a parkerized firearm? Rebluing a parkerized firearm? Rebluing a parkerized firearm? Rebluing a parkerized firearm?  
Join Date: Feb 2016
Posts: 224
Likes: 88
Liked 147 Times in 71 Posts
Default

Quote:
Originally Posted by Watchdog View Post
I'm just curious. What kind of parkerized revolver are you talking about? And why do you want to have it blued?
It is a Manurhin MR 73, if you check my other threads you will see some threads I started about it recently and some pics attached.

As far as the reason why, I stated in the original post that I want to protect the exposed metal to prolong its life/prevent rust. Concerning why I would want to blue it instead of reparkerize, it's because I prefer the look of a nice blued gun
Reply With Quote
The Following User Likes This Post:
  #8  
Old 08-21-2017, 08:31 PM
WR Moore WR Moore is offline
Member
 
Join Date: Oct 2006
Posts: 6,579
Likes: 1,787
Liked 5,342 Times in 2,685 Posts
Default

Parkerizing is a surface acretion on top of the steel. The appearance may, or may not, reflect the finish of the metal underneath. If yours is parked, it may reflect that it's original purchaser was some European governmental agency. In which case, you may be blowing whatever collector value it might (or might not) have by refinishing it. IIRC, that, or something similar, was the issue pistol of the GIGN counter terrorist unit. Might also be just another French police pistol.

Having parkerized a couple of pistols over the years, you might want to get a firm estimate prior to giving your approval for the work. As some others have suggested, the metal finish might be (much) less than a high polish and require a great deal of work. A good bead blast might be an affordable solution.

Last edited by WR Moore; 08-21-2017 at 08:32 PM.
Reply With Quote
  #9  
Old 09-01-2017, 10:11 PM
Toblerra Toblerra is offline
Member
Rebluing a parkerized firearm? Rebluing a parkerized firearm? Rebluing a parkerized firearm? Rebluing a parkerized firearm? Rebluing a parkerized firearm?  
Join Date: Feb 2016
Posts: 224
Likes: 88
Liked 147 Times in 71 Posts
Default

I have decided to go ahead and have it blued. I'll be sure to take before and after pics in a new thread.
Reply With Quote
  #10  
Old 09-01-2017, 11:42 PM
lebomm lebomm is offline
Member
Rebluing a parkerized firearm? Rebluing a parkerized firearm?  
Join Date: Dec 2008
Location: Seattle
Posts: 1,948
Likes: 38
Liked 821 Times in 490 Posts
Default

I'll be watching this project with great interest. I have a .44 3rd HE that someone parkerized, and I think I'd prefer blued as well, even if it has to be satin.

Larry
Reply With Quote
The Following User Likes This Post:
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
K22 rebluing? Bobby and Me S&W Revolvers: 1980 to the Present 7 01-13-2015 03:30 PM
What firearm or firearm related item did you buy with your tax refund thread. JaPes The Lounge 24 03-18-2013 11:50 PM
Rebluing cmort666 S&W Hand Ejectors: 1896 to 1961 34 01-04-2013 10:36 AM
Rebluing a 39-2 BrianE S&W-Smithing 5 03-15-2012 06:59 PM
Rebluing a mdl 36 anchors S&W Revolvers: 1961 to 1980 7 09-25-2008 07:25 AM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 06:27 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)