Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Ammunition-Gunsmithing > S&W-Smithing
o

Notices

S&W-Smithing Maintenance, Repair, and Enhancement of Smith & Wesson and Other Firearms.


Reply
 
Thread Tools Display Modes
  #1  
Old 05-22-2018, 12:49 PM
Echo47 Echo47 is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Mar 2013
Location: Birmingham, MI
Posts: 95
Likes: 0
Liked 61 Times in 24 Posts
Lightbulb aggressive barrel-leading removal methods?

I have two stainless 4" model 64-5s with significant barrel leading discovered on cleaning after the last range outing.
I've been using the old-fashioned elbow grease method with the available cleaners I have which claim to remove barrel leading with minimal success.
I am looking for a product/method which is "more aggressive" without having to scrub until next Christmas, but not damaging to the exterior stainless finishof the revolvers.
I can't find any information regarding use of mercury for lead removal (I know an older shooter who has some) but not clear on disposal methods for this dangerous product.
Someone also suggested firing some +P JHP rounds and problem will be resolved.
Any suggestions?
Echo47
Reply With Quote
  #2  
Old 05-22-2018, 01:03 PM
peh_7 peh_7 is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: May 2014
Location: Michigan
Posts: 122
Likes: 57
Liked 152 Times in 52 Posts
Default

For me the best and fastest is a Lewis Lead Remover. I've been using them since the '70s. Available at Brownells. Buy one kit and then adapter kit(s) for other calibers.
Reply With Quote
  #3  
Old 05-22-2018, 01:08 PM
chief38's Avatar
chief38 chief38 is online now
Member
aggressive barrel-leading removal methods?  
Join Date: Apr 2006
Posts: 17,759
Likes: 7,835
Liked 25,615 Times in 8,661 Posts
Default

The Lewis Lead Remover is an indispensable tool for .38 Special, .45 ACP & .45 Colt. Works quickly, efficiently, cheaply and won't harm your gun when used properly. Sold by Brownell's.
Reply With Quote
The Following 4 Users Like Post:
  #4  
Old 05-22-2018, 01:14 PM
Rpg Rpg is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: May 2013
Location: Denver area
Posts: 6,221
Likes: 20,240
Liked 13,057 Times in 4,157 Posts
Default

Back in the day, using mercury as a lead remover was pretty straightforward: plug one end of the barrel (beeswax worked well), fill the barrel with mercury and plug the other end. Let the barrel sit for a while, then pour the mercury back into the bottle to be used next time. A few passes with a bronze brush and the lead is gone.

That was before folks knew or worried about the dangers of using mercury of course.

Disposal wasn’t an issue: the mercury got reused.
Reply With Quote
The Following User Likes This Post:
  #5  
Old 05-22-2018, 01:22 PM
BC38's Avatar
BC38 BC38 is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Nov 2013
Location: Spokane, WA
Posts: 13,474
Likes: 1,145
Liked 18,397 Times in 7,279 Posts
Default

All I'll say about the mercury method is that it is regulated as a hazardous material for a reason, and the traces left behind in the barrel will be spewed out the first few rounds you shoot afterwards.

Get a Lewis Lead Remover, or get some Chore Boy (all copper) pads and use a few strands from one wrapped around a regular cleaning brush to scrub it out of the bore.

Last edited by BC38; 05-22-2018 at 01:24 PM.
Reply With Quote
The Following 6 Users Like Post:
  #6  
Old 05-22-2018, 01:26 PM
arjay's Avatar
arjay arjay is online now
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Mar 2006
Location: Colorado
Posts: 15,082
Likes: 91,551
Liked 26,243 Times in 8,376 Posts
Default

I was out of screens for my LLR some years back so I tried some copper chore boy wrapped around an old brush.Thats all I use now-fast and easy
Reply With Quote
The Following 6 Users Like Post:
  #7  
Old 05-22-2018, 02:16 PM
robertrwalsh robertrwalsh is offline
SWCA Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: May 2008
Location: Peoples Republic of Calif
Posts: 4,642
Likes: 1,226
Liked 5,984 Times in 2,132 Posts
Default

The very best method is mercury, referred to a few posts up. That being said it is very dangerous and not nearly as cheap as it used to be. It will, however, take the bore right down to the steel. Like others above I have had very good luck with the Lewis Lead Removal tool. Cheap, effective, easy to use.
Reply With Quote
The Following 2 Users Like Post:
  #8  
Old 05-22-2018, 02:31 PM
apollo99 apollo99 is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Jan 2016
Location: ARIZONA
Posts: 1,005
Likes: 103
Liked 1,475 Times in 601 Posts
Default

I have a method that works for me, I do a regular cleaning with Hoppes and a brass brush, usually to get the bulk of the lead and the easy stuff. I then use liberal (excuse the Liberal word) amount of canola oil, yep the one you have in the Kitchen. I let a rag soaked in it sit in the barrel for a few hours or over night. The next day the lead and fouling comes out in chunks. You can use the left over oil for frying(just kidding).Experts say Fire Clean was just canola oil and that stuff was $18 an ounce.
Reply With Quote
The Following User Likes This Post:
  #9  
Old 05-22-2018, 02:57 PM
WR Moore WR Moore is offline
Member
 
Join Date: Oct 2006
Posts: 6,579
Likes: 1,787
Liked 5,342 Times in 2,685 Posts
Default

There are also lead removal cloth products for stainless. I had a similar problem and after the LLR quit removing stuff, cutting bore patches of that stuff worked very well.

When you're down to just a wee bit in the angles of the rifling, jacketed bullets work well.
Reply With Quote
  #10  
Old 05-22-2018, 03:14 PM
Freischütz Freischütz is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Jul 2006
Location: Anchorage, Alaska
Posts: 321
Likes: 146
Liked 122 Times in 74 Posts
Default

The 50/50 mix of hydrogen peroxide and white vinegar method works well for me. Really heavy leading may take several applications.

That canola oil method sounds interesting. I'll have to try it.
Reply With Quote
  #11  
Old 05-22-2018, 03:32 PM
magothy1 magothy1 is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Jun 2010
Posts: 147
Likes: 12
Liked 50 Times in 15 Posts
Default

Birchwood Casey lead remover cloth, a patch on a very tight jag or brush works pretty well. WipeOut cleaner solvent helps.
Reply With Quote
  #12  
Old 05-22-2018, 03:35 PM
BC38's Avatar
BC38 BC38 is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Nov 2013
Location: Spokane, WA
Posts: 13,474
Likes: 1,145
Liked 18,397 Times in 7,279 Posts
Default

Quote:
Originally Posted by Freischütz View Post
The 50/50 mix of hydrogen peroxide and white vinegar method works well for me. Really heavy leading may take several applications.
Isn't that hard on the blueing - or ar you only doing this with stainless guns?
Seems like I've read of people stripping blued guns for refinishing using vinegar....
Reply With Quote
The Following 2 Users Like Post:
  #13  
Old 05-22-2018, 03:46 PM
DWalt's Avatar
DWalt DWalt is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Dec 2009
Location: South Texas & San Antonio
Posts: 33,479
Likes: 236
Liked 28,938 Times in 14,012 Posts
Default

I still use Mercury and have about two (liquid) ounces of it I use for de-leading barrels. I use great caution to avoid spills, and always outside. It is not nearly as hazardous as it is made out to be, so long as you take care to not spill any. For years, I worked around great quantities of it every day without any ill effects. The main problem today is finding any of it, but it can still be had.
Reply With Quote
The Following 2 Users Like Post:
  #14  
Old 05-22-2018, 03:49 PM
Delta Rose Delta Rose is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Dec 2011
Location: Willamette Valley, Oregon
Posts: 181
Likes: 779
Liked 195 Times in 87 Posts
Default

Brass wool wrapped around an old bore brush and a little CLP has always worked well for me.
Reply With Quote
The Following 2 Users Like Post:
  #15  
Old 05-23-2018, 12:28 PM
Steve_53 Steve_53 is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Nov 2016
Location: People's Republic of Mass
Posts: 25
Likes: 34
Liked 41 Times in 9 Posts
Default

Not cheap, but definitely effective and usable on blued or stainless guns: Outer's Foul Out III. Equally good at removing copper fouling (with the appropriate solution).
Reply With Quote
The Following User Likes This Post:
  #16  
Old 05-23-2018, 01:05 PM
gwpercle's Avatar
gwpercle gwpercle is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Nov 2011
Location: Baton Rouge, La.
Posts: 6,837
Likes: 7,387
Liked 8,045 Times in 3,651 Posts
Default

Lewis Lead Remover....it will do it !

Second best is bore brush, wrapped with #000 or #0000 steel wool , with plenty of Ed's Red Bore Cleaner....a smearing of JB Bore Paste also helps get the lead out !

Last edited by gwpercle; 05-23-2018 at 01:09 PM.
Reply With Quote
  #17  
Old 05-23-2018, 02:34 PM
Gamecock's Avatar
Gamecock Gamecock is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Jan 2010
Location: SC
Posts: 3,533
Likes: 589
Liked 3,637 Times in 1,627 Posts
Default

Copper wool very aggressive on leading. Amazingly so. You'll ask yourself, "How does it do that?"
__________________
I've still got it made.
Reply With Quote
  #18  
Old 05-23-2018, 03:26 PM
Jeff423's Avatar
Jeff423 Jeff423 is offline
US Veteran
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Nov 2007
Location: St. Charles County, MO
Posts: 1,374
Likes: 973
Liked 1,071 Times in 424 Posts
Default

Quote:
Originally Posted by Steve_53 View Post
Not cheap, but definitely effective and usable on blued or stainless guns: Outer's Foul Out III. Equally good at removing copper fouling (with the appropriate solution).

Apart from mercury I have tried all the above mentioned methods and have the Foul Out to be the most effective. I found an original Foul Out and a Foul Out II on ebay with a couple gallons of solutions - lead and copper.

I used the LLR and Copper Chore Boy and then followed it with the Foul Out and it still pulled lead out of the barrel. Whether or not this remaining lead was problematical I can't say, but it was there after the LLR and Chore Boy.
However it's not fast.

Last edited by Jeff423; 05-23-2018 at 03:30 PM.
Reply With Quote
  #19  
Old 05-23-2018, 03:51 PM
andy52's Avatar
andy52 andy52 is offline
US Veteran
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Feb 2017
Location: Missouri
Posts: 2,929
Likes: 3,902
Liked 6,802 Times in 1,851 Posts
Default

I think I'll stick with my Lewis lead remover, the mercury thing sounds a little to hazardous.
Reply With Quote
The Following User Likes This Post:
  #20  
Old 05-23-2018, 04:46 PM
cowboy4evr cowboy4evr is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Jun 2016
Location: for now ,Texas
Posts: 2,738
Likes: 185
Liked 3,297 Times in 1,523 Posts
Default

Go to the nearest Walmart / Ace Hdwe and buy " Chore Boy " the pure copper scouring pads . Cut a piece about the size of your thumb , or a bit bigger . Wrap it around an old bore brush for that caliber and start scrubbing . The lead will be gone in a couple of minutes . Copper is much softer than the barrel so no harm to the barrel . Regards, Paul
Reply With Quote
The Following User Likes This Post:
  #21  
Old 05-23-2018, 06:12 PM
Gamecock's Avatar
Gamecock Gamecock is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Jan 2010
Location: SC
Posts: 3,533
Likes: 589
Liked 3,637 Times in 1,627 Posts
Default

Quote:
Originally Posted by cowboy4evr View Post

Go to the nearest Walmart / Ace Hdwe and buy " Chore Boy " the pure copper scouring pads .
Any copper wool/pad will do. I couldn't find Chore Boy locally, so I bought 'O cedar Copper Scrubbers.' Works fine.
__________________
I've still got it made.
Reply With Quote
  #22  
Old 05-23-2018, 08:50 PM
italiansport italiansport is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Oct 2007
Location: Arizona
Posts: 3,222
Likes: 2,905
Liked 5,333 Times in 1,869 Posts
Default

i just picked up an old Winchester model 90 in 22LR caliber that's heavily leaded. Any recommendations for dealing with this specific case?
Jim
Reply With Quote
  #23  
Old 05-23-2018, 10:37 PM
August August is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Apr 2018
Location: SE USA
Posts: 1
Likes: 0
Liked 0 Times in 0 Posts
Default

I learned this in basic training from an old hand. Use a copper or bronze bore brush, dip in Hoppes, and scrub in short fast strokes (I mean like 1/2” inch, enter from the muzzle, of course) and work your way starting from the cone to the muzzle. The lead will come completely off in many flakes. Easy as you please.
Reply With Quote
  #24  
Old 05-24-2018, 09:56 AM
cowboy4evr cowboy4evr is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Jun 2016
Location: for now ,Texas
Posts: 2,738
Likes: 185
Liked 3,297 Times in 1,523 Posts
Default

When looking to buy copper scouring pads , just make sure it says , " 100 % copper " . Many off brands are actually steel coated with copper .
Reply With Quote
  #25  
Old 05-24-2018, 10:03 AM
Steve912 Steve912 is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Apr 2016
Posts: 2,444
Likes: 4,172
Liked 2,327 Times in 1,194 Posts
Default

Quote:
Originally Posted by arjay View Post
I was out of screens for my LLR some years back so I tried some copper chore boy wrapped around an old brush.Thats all I use now-fast and easy
Chore Boy's can be hard to find, depending on how many
crackheads are in your neighborhood.

Anyone try aluminum window screen?
Reply With Quote
  #26  
Old 05-24-2018, 10:09 AM
Steve912 Steve912 is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Apr 2016
Posts: 2,444
Likes: 4,172
Liked 2,327 Times in 1,194 Posts
Default

Quote:
Originally Posted by apollo99 View Post
I then use liberal (excuse the Liberal word) amount of canola oil, yep the one you have in the Kitchen. I let a rag soaked in it sit in the barrel for a few hours or over night. The next day the lead and fouling comes out in chunks. You can use the left over oil for frying(just kidding).Experts say Fire Clean was just canola oil and that stuff was $18 an ounce.
Interesting technique!

Dollar stores have $1 cans of canola oil cooking spray...put one of your old nozzles/wands (you save em, right??) and go to town!

The FireClean guys filed suit over the allegations. The guys who
did the spectroscopy--comparing FC with various household
cooking oils--showed the judge their findings, and the case was
dismissed.
Reply With Quote
  #27  
Old 05-27-2018, 04:54 PM
Freischütz Freischütz is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Jul 2006
Location: Anchorage, Alaska
Posts: 321
Likes: 146
Liked 122 Times in 74 Posts
Default

Quote:
Originally Posted by BC38 View Post
Isn't that hard on the blueing - or ar you only doing this with stainless guns?
Seems like I've read of people stripping blued guns for refinishing using vinegar....
I've never had that problem. But I've heard that comment too, and if some spills I wipe the spill off immediately.
Reply With Quote
  #28  
Old 05-27-2018, 06:39 PM
BE Mike's Avatar
BE Mike BE Mike is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Sep 2003
Location: Indiana
Posts: 3,575
Likes: 2,235
Liked 3,476 Times in 1,475 Posts
Default

Given a little time Kroil will work its way under the leading and can be removed using a brass bore brush.
Reply With Quote
The Following User Likes This Post:
  #29  
Old 05-28-2018, 12:24 AM
cololab's Avatar
cololab cololab is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Mar 2011
Location: Colorado
Posts: 290
Likes: 266
Liked 209 Times in 109 Posts
Default

Quote:
Originally Posted by Freischütz View Post
The 50/50 mix of hydrogen peroxide and white vinegar method works well for me. Really heavy leading may take several applications.

That canola oil method sounds interesting. I'll have to try it.
I read about using peroxide and white vinegar while searching for an efficient way to clean rimfire suppressors. The result, if I recall correctly, of the mixture interacting with lead is the creation of lead acetate; a poisonous substance that is easily absorbed through the skin or through breathing the vapors. That admonishment dissuaded me from trying the process.

The canola oil sounds much less hazardous.
Reply With Quote
The Following User Likes This Post:
  #30  
Old 05-28-2018, 05:25 AM
Bushytale Bushytale is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Dec 2009
Location: S. Fla
Posts: 69
Likes: 1
Liked 51 Times in 31 Posts
Default removing barrel leading!

I tried the Lewis lead remover and found it to work ok, but felt like it was more trouble than it was worth. I use the stainless steel bore brushes that they sell at gun shows. I found them to work better than anything else. Pick a brush that fits your bore without being too tight and just run it back and forth. The lead will just flake out. Use a slightly larger brush to clean the forcing cone and chambers. These brushes are stiffer than bronze but a mild steel much softer than barrel steel.
__________________
Billy
Gunsmith, M/C mechanic
Reply With Quote
  #31  
Old 05-28-2018, 06:32 PM
Tom S.'s Avatar
Tom S. Tom S. is offline
Moderator
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Nov 2015
Location: SE Michigan
Posts: 18,473
Likes: 8,386
Liked 17,058 Times in 5,593 Posts
Default

Quote:
Originally Posted by Bushytale View Post
I tried the Lewis lead remover and found it to work ok, but felt like it was more trouble than it was worth. I use the stainless steel bore brushes that they sell at gun shows. I found them to work better than anything else. Pick a brush that fits your bore without being too tight and just run it back and forth. The lead will just flake out. Use a slightly larger brush to clean the forcing cone and chambers. These brushes are stiffer than bronze but a mild steel much softer than barrel steel.
Rub steel with more steel? NO!!!!!!!

Saying the steel is softer than barrel steel (which probably isn't true, especially in the case of stainless barrels) is like saying using 500 grit sandpaper is OK because it's softer than 100 grit. Water is 'soft' too, yet over time it created the Grand Canyon.

Do your guns a favor and throw those brushes away. And if you ever decide to sell any of your guns here, please remind me you cleaned them with stainless so I won't even be tempted.
__________________
So many S&W's, so few funds!!
Reply With Quote
The Following 2 Users Like Post:
  #32  
Old 05-28-2018, 06:58 PM
Warren Sear's Avatar
Warren Sear Warren Sear is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Apr 2011
Location: Twin Cites, Minnesota
Posts: 5,141
Likes: 10,957
Liked 10,857 Times in 3,275 Posts
Default

^^^ Yup. What he said. I am continually amazed at the mis-treatment done to guns. Mercury, vinegar, steel bore brushes, steel wool, bore paste....
Attached Images
File Type: jpg 3stooges_face_palm.jpg (21.0 KB, 43 views)
Reply With Quote
  #33  
Old 05-28-2018, 11:40 PM
R*E R*E is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Aug 2008
Posts: 207
Likes: 216
Liked 138 Times in 76 Posts
Default

Quote:
Originally Posted by Warren Sear View Post
^^^ Yup. What he said. I am continually amazed at the mis-treatment done to guns. Mercury, vinegar, steel bore brushes, steel wool, bore paste....
Well, the OP asked about aggressive cleaning methods for removing lead and these answers fit that request.
Reply With Quote
The Following 2 Users Like Post:
  #34  
Old 05-29-2018, 12:36 AM
Warren Sear's Avatar
Warren Sear Warren Sear is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Apr 2011
Location: Twin Cites, Minnesota
Posts: 5,141
Likes: 10,957
Liked 10,857 Times in 3,275 Posts
Default

True dat...
Reply With Quote
  #35  
Old 05-29-2018, 12:58 AM
Warren Sear's Avatar
Warren Sear Warren Sear is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Apr 2011
Location: Twin Cites, Minnesota
Posts: 5,141
Likes: 10,957
Liked 10,857 Times in 3,275 Posts
Default

I would bet a long bit chucked in a power drill would clean 'er right out, too.

Last edited by Warren Sear; 05-29-2018 at 08:40 PM.
Reply With Quote
The Following User Likes This Post:
  #36  
Old 05-29-2018, 05:11 AM
Tom S.'s Avatar
Tom S. Tom S. is offline
Moderator
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Nov 2015
Location: SE Michigan
Posts: 18,473
Likes: 8,386
Liked 17,058 Times in 5,593 Posts
Default

Quote:
Originally Posted by R*E View Post
Well, the OP asked about aggressive cleaning methods for removing lead and these answers fit that request.

Aggressive shouldn't equal destructive but technically, I guess you're right.
__________________
So many S&W's, so few funds!!
Reply With Quote
  #37  
Old 05-29-2018, 05:59 AM
kbm6893 kbm6893 is online now
SWCA Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Apr 2007
Location: Pennsylvania
Posts: 6,625
Likes: 636
Liked 6,861 Times in 2,541 Posts
Default

Quote:
Originally Posted by Warren Sear View Post
I would bet a long bit chucked in a power drill would clean 'er right out, too.
That’s ok for chambers on a revolver but never on a rifled barrel.
Reply With Quote
  #38  
Old 05-29-2018, 06:13 AM
Bushytale Bushytale is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Dec 2009
Location: S. Fla
Posts: 69
Likes: 1
Liked 51 Times in 31 Posts
Default

Quote:
Originally Posted by Tom S. View Post
Rub steel with more steel? NO!!!!!!!

Saying the steel is softer than barrel steel (which probably isn't true, especially in the case of stainless barrels) is like saying using 500 grit sandpaper is OK because it's softer than 100 grit. Water is 'soft' too, yet over time it created the Grand Canyon.

Do your guns a favor and throw those brushes away. And if you ever decide to sell any of your guns here, please remind me you cleaned them with stainless so I won't even be tempted.
Sorry to burst your bubble, but years of using those brushes has done no damage to my bores. That is barrels made of stainless steel and carbon steel. The mild stainless steel they are made from is much softer than barrel steel. You can make faces all you want but it doesn't change the facts.
__________________
Billy
Gunsmith, M/C mechanic
Reply With Quote
  #39  
Old 05-29-2018, 06:43 PM
Tom S.'s Avatar
Tom S. Tom S. is offline
Moderator
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Nov 2015
Location: SE Michigan
Posts: 18,473
Likes: 8,386
Liked 17,058 Times in 5,593 Posts
Default

Quote:
Originally Posted by Bushytale View Post
Sorry to burst your bubble, but years of using those brushes has done no damage to my bores. That is barrels made of stainless steel and carbon steel. The mild stainless steel they are made from is much softer than barrel steel. You can make faces all you want but it doesn't change the facts.

You're not bursting my bubble. I am a retired journeyman die maker who worked with all kinds of steel, copper, bronze and aluminum and also have a degree that included metallurgy classes. So I guess we'll just have to agree to disagree.
__________________
So many S&W's, so few funds!!
Reply With Quote
The Following User Likes This Post:
  #40  
Old 05-29-2018, 08:41 PM
Warren Sear's Avatar
Warren Sear Warren Sear is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Apr 2011
Location: Twin Cites, Minnesota
Posts: 5,141
Likes: 10,957
Liked 10,857 Times in 3,275 Posts
Default

Quote:
Originally Posted by kbm6893 View Post
That’s ok for chambers on a revolver but never on a rifled barrel.
Just kiddin'.
Reply With Quote
  #41  
Old 05-29-2018, 11:02 PM
Rosco Shooter Rosco Shooter is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Jul 2010
Location: Northern Michigan Woods
Posts: 303
Likes: 112
Liked 316 Times in 132 Posts
Default

My boys discovered the joy of using the Lewis Lead Remover after they put 100 cast SWCs through my Model 629. The LLR also has an attachment that cleans the forcing cone. I highly recommend it.
Reply With Quote
  #42  
Old 05-30-2018, 10:00 AM
slabsides52 slabsides52 is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Sep 2006
Location: South Carolina
Posts: 40
Likes: 24
Liked 31 Times in 13 Posts
Default

Lewis Lead Remover. Safe, easy to use. Been around for years. Very cost effective. Get one and you will never look back.
Reply With Quote
  #43  
Old 05-30-2018, 12:02 PM
LoboGunLeather's Avatar
LoboGunLeather LoboGunLeather is offline
US Veteran
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Nov 2008
Location: Colorado
Posts: 7,518
Likes: 19,273
Liked 32,340 Times in 5,474 Posts
Default

I was taught this method during a few weeks spent on a casual assignment at the Fort Benning, Georgia, post armory cleaning all sorts of weapons heavily used in training, frequently with bores heavily fouled by jacketed bullets. Works perfectly well for leading removal.

Use a worn bore brush of proper size wrapped with strands of 0000 steel wool, run it through the bore dry multiple times until rifling appears to be clearly defined. Then clean normally using bore cleaning solvent, good bore brush, and patches.

In the 48 years since that experience I have used this method on dozens of firearms (pistols, rifles, revolvers, shotguns), and all have been completely cleared of lead deposits within a few minutes. In my revolvers I have adapted a variation for cleaning cylinder chambers with leading at the forcing cones, just chuck a section of cleaning rod with steel wool wrapped bore brush into a drill, insert and give each chamber a brief treatment. Leading on cylinder faces and around barrel/frame attachment can be scrubbed off with hand-held steel wool.

No damage to rifling, bore, or revolver finish. My 6" Model 19 went through several seasons of PPC competition using lead bullets, has been cleaned in this manner dozens and dozens of times, and still performs perfectly after 43 continuous years of use and tens of thousands of rounds fired.
Reply With Quote
The Following 3 Users Like Post:
  #44  
Old 05-31-2018, 04:41 AM
Bushytale Bushytale is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Dec 2009
Location: S. Fla
Posts: 69
Likes: 1
Liked 51 Times in 31 Posts
Default

Quote:
Originally Posted by Tom S. View Post
You're not bursting my bubble. I am a retired journeyman die maker who worked with all kinds of steel, copper, bronze and aluminum and also have a degree that included metallurgy classes. So I guess we'll just have to agree to disagree.
Tom, I don't want to get into a pissing match with you. You are a moderator and I don't want to get thrown off this forum. At the same time I don't want to be talked down to. You are not the only one here with credentials.

I have spent many years dealing with and studying metallurgy. I started building racing motorcycles in the late '60s before going into the Army and in the mid '70s went to gunsmith school at the Colorado School of Trades on the GI bill. That was over 2000 hours of study and hands on training with some very knowledgeable people. And part of that study was metallurgy. I have since spent many years gunsmithing and building race bikes, machining parts, soldering, welding and dealing with many different types of metal.

You are right we will have to agree to disagree. No hard feelings.
__________________
Billy
Gunsmith, M/C mechanic

Last edited by Bushytale; 05-31-2018 at 05:39 AM.
Reply With Quote
  #45  
Old 05-31-2018, 08:56 AM
BE Mike's Avatar
BE Mike BE Mike is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Sep 2003
Location: Indiana
Posts: 3,575
Likes: 2,235
Liked 3,476 Times in 1,475 Posts
Default

Quote:
Originally Posted by LoboGunLeather View Post
I was taught this method during a few weeks spent on a casual assignment at the Fort Benning, Georgia, post armory cleaning all sorts of weapons heavily used in training, frequently with bores heavily fouled by jacketed bullets. Works perfectly well for leading removal.

Use a worn bore brush of proper size wrapped with strands of 0000 steel wool, run it through the bore dry multiple times until rifling appears to be clearly defined. Then clean normally using bore cleaning solvent, good bore brush, and patches.

In the 48 years since that experience I have used this method on dozens of firearms (pistols, rifles, revolvers, shotguns), and all have been completely cleared of lead deposits within a few minutes. In my revolvers I have adapted a variation for cleaning cylinder chambers with leading at the forcing cones, just chuck a section of cleaning rod with steel wool wrapped bore brush into a drill, insert and give each chamber a brief treatment. Leading on cylinder faces and around barrel/frame attachment can be scrubbed off with hand-held steel wool.

No damage to rifling, bore, or revolver finish. My 6" Model 19 went through several seasons of PPC competition using lead bullets, has been cleaned in this manner dozens and dozens of times, and still performs perfectly after 43 continuous years of use and tens of thousands of rounds fired.
Wouldn't you be concerned about tiny particles of the 0000 steel wool becoming imbedded in the stainless steel barrel of the OP's revolver? Isn't stainless softer than the steel in steel wool?
Reply With Quote
  #46  
Old 05-31-2018, 09:34 AM
LoboGunLeather's Avatar
LoboGunLeather LoboGunLeather is offline
US Veteran
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Nov 2008
Location: Colorado
Posts: 7,518
Likes: 19,273
Liked 32,340 Times in 5,474 Posts
Default

Quote:
Originally Posted by BE Mike View Post
Wouldn't you be concerned about tiny particles of the 0000 steel wool becoming imbedded in the stainless steel barrel of the OP's revolver? Isn't stainless softer than the steel in steel wool?
No. Steel wool is not "harder" than either the carbon steel or stainless steels used in firearms. It is significantly harder than lead, so it easily cuts through and removes leading deposits. It will also remove fouling from jacketed bullets, which can be a serious problem with some types of ammunition.

0000-grade steel wool can also be used to remove minor surface rust on blued steel firearms or for cleaning up exterior surfaces of stainless steel firearms. It will not damage bluing and it will not scratch or scour stainless surfaces. I suppose that a person could over-do things by hard scrubbing, but light to moderate pressure has never caused any damaging effects in my experience.
Reply With Quote
  #47  
Old 05-31-2018, 09:35 AM
max503's Avatar
max503 max503 is offline
Member
aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods? aggressive barrel-leading removal methods?  
Join Date: Jan 2018
Location: So. Illinois
Posts: 2,576
Likes: 1,375
Liked 3,292 Times in 1,411 Posts
Default

Quote:
Originally Posted by Echo47 View Post
Someone also suggested firing some +P JHP rounds and problem will be resolved.
Any suggestions?
Echo47
I've used this method in handguns, and the "Chore Boy around a brush method" for my cast-bullet-only rifles.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Barrel leading JTPro Smith & Wesson M&P Pistols 16 03-31-2018 05:27 PM
Barrel leading Herman1973 S&W Revolvers: 1961 to 1980 17 04-02-2017 09:13 AM
Leading in Barrel Durabledan Smith & Wesson Semi-Auto Pistols 8 12-28-2011 04:20 PM
Barrel leading 38, not 9mm dkp9782 Reloading 6 12-04-2010 01:52 AM
617 barrel leading up pea shooter S&W Revolvers: 1980 to the Present 11 08-08-2010 12:09 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 09:22 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)