Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Ammunition-Gunsmithing > S&W-Smithing
o

Notices

S&W-Smithing Maintenance, Repair, and Enhancement of Smith & Wesson and Other Firearms.


Reply
 
Thread Tools Display Modes
  #1  
Old 09-11-2018, 06:09 PM
kbm6893 kbm6893 is offline
SWCA Member
Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers  
Join Date: Apr 2007
Location: Pennsylvania
Posts: 6,625
Likes: 636
Liked 6,861 Times in 2,541 Posts
Default Painting Front Sight on Fixed Sighted Revolvers

I have several. A 10-8, a 64, a K38 Masterpiece, a 640 no dash, and now a 681. I'd like to paint the front sights. Some youtube videos kind of suck and I get tired watching them to see if they are good. I'm looking for as bright as possible. Neon green, red, or orange would be fine. Probably leave the K38 alone. Why mess with a 60 year old gun?

I want it to be completely reversable and able to be wiped off if I get any on the finish. I will tape off the area around the sight.

So advice would be helpful!
Reply With Quote
The Following User Likes This Post:
  #2  
Old 09-11-2018, 06:18 PM
WR Moore WR Moore is offline
Member
 
Join Date: Oct 2006
Posts: 6,580
Likes: 1,787
Liked 5,342 Times in 2,685 Posts
Default

Sometimes a white base coat helps brightness. I've used red nail polish a couple times with good results. Degrease first. Fingernail polish remover (acetone) and some scrubbing will remove.

That said, the paint can sometimes be reflective.
Reply With Quote
The Following 5 Users Like Post:
  #3  
Old 09-11-2018, 06:22 PM
Andy Lowry Andy Lowry is offline
Member
Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers  
Join Date: Sep 2017
Location: Prescott AZ
Posts: 478
Likes: 164
Liked 1,137 Times in 288 Posts
Default

Your local Walmart should have an assortment of Testor's fluorescent acrylic paints. They're inexpensive and are thick enough for easy application. Acrylic will chip off more easily than enamel, so I put a coat of clear fingernail polish over the paint. No trouble to remove if you get tired of it, and any evidence of clumsiness wipes off easily before it dries.
Reply With Quote
The Following 3 Users Like Post:
  #4  
Old 09-11-2018, 06:29 PM
Cocked & Locked's Avatar
Cocked & Locked Cocked & Locked is offline
Member
Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers  
Join Date: Mar 2003
Location: Silver Hill, NC
Posts: 2,071
Likes: 4,551
Liked 4,329 Times in 825 Posts
Default

I use fingernail polish...not on me, on the sights! My instructed me to put on a coat of white first to make it brighter.

Then I like orangish red as the top coat. Durable but will come off with nail polish remover.


Here's some on a Charter Arms Bulldog .44 special



on a Colt Commander



1917 N-frame .45



and the list goes on...
__________________
C & L
Reply With Quote
The Following 4 Users Like Post:
  #5  
Old 09-11-2018, 06:53 PM
andy52's Avatar
andy52 andy52 is offline
US Veteran
Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers  
Join Date: Feb 2017
Location: Missouri
Posts: 2,929
Likes: 3,902
Liked 6,802 Times in 1,851 Posts
Default

Extremely easy to remove if you don't like it, a little acetone and your back to square one.
Reply With Quote
The Following User Likes This Post:
  #6  
Old 09-11-2018, 07:04 PM
Walking softly Walking softly is offline
Member
Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers  
Join Date: Jun 2015
Posts: 11
Likes: 0
Liked 13 Times in 7 Posts
Default Front sight paint

Yes, often the front sight will benefit from a contrasting color. Orange and red are great in daylight, but I prefer white, it is visible in daylight and reduced light.

I mask the front sight and paint 2 coats of appliance chip repair paint. It's durable, has never needed repair and wipes clean. I used it on a ported revolver and wipe the sight clean after every range session.
Reply With Quote
The Following 2 Users Like Post:
  #7  
Old 09-11-2018, 07:06 PM
eb07 eb07 is offline
Member
Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers  
Join Date: Sep 2012
Location: Arizona
Posts: 2,232
Likes: 2,809
Liked 5,794 Times in 1,452 Posts
Default

Glow on paint on all mine.... Edited for photos.

Glow-On

Not only does it give you a sight you can see during the day but one shot with a light and you have a night sights.

I use green so it looks white by day. On all my revolvers. Apply then a coat of clear nail polish. I have had EDC snubs still have it on a year later. They have many colors.

4" Model 19 ( my current EDC and bedside handgun) after one hit with light during day ( I only use front sight on this)




Smith 442 my

Day





Night



It lasts 5 minutes or more after you hit it once. In sunlight it glows a bit as well so you get a brighter sight.

Costs around ten bucks and I have done about five handguns with it and still have enough to do double that.

I think it's the best option out there.

Last edited by eb07; 09-12-2018 at 09:34 AM.
Reply With Quote
The Following 5 Users Like Post:
  #8  
Old 09-11-2018, 07:38 PM
VaTom VaTom is offline
Member
Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers  
Join Date: Jul 2016
Location: SW Virginia
Posts: 2,012
Likes: 9,137
Liked 5,177 Times in 1,309 Posts
Default

Did 3 of my revolvers last week. All with Testor"s fluorescent red enamel. Several coats. Be patience and give plenty of time between coats. A Model 64 (stainless), Model 10 (Nickel) and a Model 15. Clean the sight well with acetone or some type of solvent. Have a Model 63 with a factory red insert so decided to stay with red for all revolvers (see picture)

Bought some fluorescent yellow but did not like it on black finish. Also some gloss white to touch up sights on a 1985 Beretta 92F.
Attached Images
File Type: jpg IMG_2740.jpg (88.4 KB, 93 views)
File Type: jpg IMG_2747.JPG (115.5 KB, 152 views)
File Type: jpg IMG_2741.jpg (169.6 KB, 113 views)
Reply With Quote
The Following 2 Users Like Post:
  #9  
Old 09-11-2018, 07:51 PM
chief38's Avatar
chief38 chief38 is offline
Member
Painting Front Sight on Fixed Sighted Revolvers  
Join Date: Apr 2006
Posts: 17,759
Likes: 7,836
Liked 25,615 Times in 8,661 Posts
Default

Testor's Model Paint is the way to go. Go to a craft store like Michael's, Jo-ann's, etc. and find the color you want. They are cheap enough to get a few colors - about $1.99 / 1 ounce bottle

HINTS:

Clean the area with Alcohol before applying paint & don't touch with fingers.

Use a wooden toothpick to apply, not a brush.

Apply 2 or 3 lighter coats, not a heavy one. Let dry 24 hours between coats and 48 hours before shooting.

Don't worry about any paint that goes over the sides - you can clean it up with a new razor blade when it dries.

If you want to remove it, use a new razor blade to remove the majority and then some paint thinner for the rest.
Reply With Quote
The Following 3 Users Like Post:
  #10  
Old 09-11-2018, 08:05 PM
chief38's Avatar
chief38 chief38 is offline
Member
Painting Front Sight on Fixed Sighted Revolvers  
Join Date: Apr 2006
Posts: 17,759
Likes: 7,836
Liked 25,615 Times in 8,661 Posts
Default

BTW,

Before painting the front sights on all your guns, do one first then shoot it outdoors in the sun. I find that the sun makes my red painted sight look gray. While the painted front sights usually work great indoors I find no so much outdoors - which is why I suggest doing one first and then if you like it proceed with the rest.
Reply With Quote
  #11  
Old 09-11-2018, 08:08 PM
gwpercle's Avatar
gwpercle gwpercle is offline
Member
Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers  
Join Date: Nov 2011
Location: Baton Rouge, La.
Posts: 6,838
Likes: 7,394
Liked 8,050 Times in 3,652 Posts
Default

Bic White-Out correction fluid , available just about everywhere in brush or pen applicator , is flat white , fast drying lacquer.
Use as a base coat for colors....makes them brighter or just use the flat white like I do. I keep a pen in my shooting box.
Gary

Last edited by gwpercle; 09-11-2018 at 08:09 PM.
Reply With Quote
The Following 3 Users Like Post:
  #12  
Old 09-11-2018, 08:19 PM
dr. K dr. K is offline
Member
Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers  
Join Date: Jul 2014
Posts: 226
Likes: 764
Liked 228 Times in 118 Posts
Default

I went to the grocery store and bought the first white nail polish and the first red nail polish I saw. I taped the sides of the sight and looked down the sights of the (unloaded) revolver so I could pinpoint the area I wanted to highlight in color. I put the white on first and let it dry about 90%, then kind of dabbed it very lightly with my finger to texture it a bit. Once it was 100% dry I put red nail polish over top. S’pose I could have used orange or green or whatever... maybe lavender with glitter in it... but I liked red. If a gun’s gonna wear nail polish, it should look classy enough for a night out on the town, I say. Anyhow, on a stainless gun nail polish remover with acetone on a q-tip will take it right off. I would NOT use that product on a blued gun, unless someone more knowledgeable than me on this forum says acetone is OK.
Reply With Quote
  #13  
Old 09-12-2018, 06:43 AM
stu1ritter's Avatar
stu1ritter stu1ritter is offline
US Veteran
Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers  
Join Date: Jul 2010
Location: Denver, CO
Posts: 2,259
Likes: 854
Liked 4,380 Times in 1,078 Posts
Default

+3 on Testors and I've tried quite a few others.

Stu
Reply With Quote
  #14  
Old 09-14-2018, 06:20 PM
mogwan mogwan is offline
Member
Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers  
Join Date: Jun 2012
Posts: 101
Likes: 7
Liked 58 Times in 22 Posts
Default

Testor's makes a Flat White enamel that I've used on both front and rear sight blades (to renew the ****** factory white sight outline printing).

As others have said, go slow... tape carefully... I use a fine Sable brush.

If you really want more permanence, coat the finished job with Sally Hansen "Hard as Nails" clear polish cover.
Reply With Quote
The Following User Likes This Post:
  #15  
Old 09-22-2018, 09:40 AM
gwpercle's Avatar
gwpercle gwpercle is offline
Member
Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers  
Join Date: Nov 2011
Location: Baton Rouge, La.
Posts: 6,838
Likes: 7,394
Liked 8,050 Times in 3,652 Posts
Default

Quote:
Originally Posted by dr. K View Post
I went to the grocery store and bought the first white nail polish and the first red nail polish I saw. I taped the sides of the sight and looked down the sights of the (unloaded) revolver so I could pinpoint the area I wanted to highlight in color. I put the white on first and let it dry about 90%, then kind of dabbed it very lightly with my finger to texture it a bit. Once it was 100% dry I put red nail polish over top. S’pose I could have used orange or green or whatever... maybe lavender with glitter in it... but I liked red. If a gun’s gonna wear nail polish, it should look classy enough for a night out on the town, I say. Anyhow, on a stainless gun nail polish remover with acetone on a q-tip will take it right off. I would NOT use that product on a blued gun, unless someone more knowledgeable than me on this forum says acetone is OK.
Acetone will not damage a blued finish. Plastic and the finish on wood grips is another matter...they might be damaged.
Interestingly , whatever material toothbrushes are made from , acetone doesn't melt them....I use acetone and a toothbrush to clean bullet moulds all the time...maybe they are made of Nylon,
acetone is one of the best degreasers but it is potent and will damage some plastics...so be careful when using it.
Nail Polish Remover is just lacquer thinner, it may damage some plastics and wood finishes.
Just be careful when using any of these , remove grips and wipe off any spills on plastics .
Gary
Reply With Quote
  #16  
Old 09-23-2018, 09:39 PM
TheGrimReaper TheGrimReaper is offline
Member
Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers  
Join Date: Aug 2018
Posts: 7
Likes: 14
Liked 5 Times in 2 Posts
Default

Quote:
Originally Posted by Andy Lowry View Post
Your local Walmart should have an assortment of Testor's fluorescent acrylic paints. They're inexpensive and are thick enough for easy application. Acrylic will chip off more easily than enamel, so I put a coat of clear fingernail polish over the paint. No trouble to remove if you get tired of it, and any evidence of clumsiness wipes off easily before it dries.
Excatly what I do too.
Reply With Quote
  #17  
Old 09-23-2018, 10:40 PM
jimmyj's Avatar
jimmyj jimmyj is offline
Member
Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers  
Join Date: May 2003
Location: DUNNELLON, FLORIDA USA
Posts: 11,102
Likes: 1,690
Liked 16,302 Times in 4,231 Posts
Default

I use fingernail polish (Walmart). I paint the entire front ramp blade with red and just the tip of the sight with white.
Reply With Quote
The Following 2 Users Like Post:
  #18  
Old 09-24-2018, 08:27 AM
papajohn428's Avatar
papajohn428 papajohn428 is offline
Member
Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers  
Join Date: May 2004
Location: Coastal Missouri
Posts: 1,898
Likes: 899
Liked 977 Times in 467 Posts
Talking

Quote:
Originally Posted by jimmyj View Post
I use fingernail polish (Walmart). I paint the entire front ramp blade with red and just the tip of the sight with white.
I do that too, it gives a more precise sight picture.

One suggestion I'd make it to try several different colors and see what pops the best for your vision. I used white, yellow and red for years, then found a bottle of bright green nail polish and WOW, what a difference! It seems almost luminescent. A dab of white on top, and it was perfect.
Reply With Quote
  #19  
Old 09-24-2018, 09:46 AM
WR Moore WR Moore is offline
Member
 
Join Date: Oct 2006
Posts: 6,580
Likes: 1,787
Liked 5,342 Times in 2,685 Posts
Default

I did the nail polish thing on a 64 and it works great if there's light from behind. Not quite the result I expected with the light from other angles. Being curious, I compared the result to a 36 3" HB that had been Armoloyed and the sight not painted and that sight showed up much better without paint than the 64's.

I've had much better results with other pistols. I do believe the issue with a lot of the pistols is the ramp angle of the front sight. The ramp angle on the 36 is much steeper than that of a 64. If you shortened the length of the sight by about half, you'd have a much better sight picture.

I've got a few blued dovetail front sights for auto pistols hanging around, hummmm.

Last edited by WR Moore; 09-24-2018 at 09:48 AM.
Reply With Quote
  #20  
Old 09-24-2018, 12:24 PM
oddshooter oddshooter is offline
Member
Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers  
Join Date: Aug 2014
Location: the free state of Arizona
Posts: 1,016
Likes: 2,402
Liked 1,795 Times in 625 Posts
Default

Nail polish is tough when dry:
Bright White as a base. required.
Triple Orange as the color. easiest to see
Clear coat to keep the shine and protect.

Works great and is inexpensive.

I even sometimes outline the top of my rear sight in white.

I've done dozens and dozens. I can't see black sights on a black target.


Prescut
Reply With Quote
  #21  
Old 10-03-2018, 12:45 PM
ch1966 ch1966 is offline
Member
Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers  
Join Date: Mar 2011
Location: SW Oklahoma
Posts: 35
Likes: 2
Liked 12 Times in 8 Posts
Default

I used Broadway Nails "Bora Bora" for my 60-4 that I just picked up a few days ago.

I like it so much that I left a review on some blog.





Reply With Quote
  #22  
Old 10-06-2018, 01:33 AM
Firesticks Firesticks is offline
Banned
Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers  
Join Date: May 2018
Location: Stuck in Wyoming.
Posts: 358
Likes: 1,053
Liked 876 Times in 246 Posts
Default

Nail polish remover is acetone with oils in it to protect the nails. M.E.K. is the best sovent to remove oils and soils on your sight. IT WILL dissolve some plastics as will acetone and lacquer thinners.M.E.K stand for methyl ethyl keytone. All 3 of these solvents are keytones used in industry from solvents to chemical extractors to thinners. Be careful with them. Vapors can over come you in closed environments. Spillage can result in damaged finishes on wood to melting some plastics. ALL are VERY flammable.
Reply With Quote
  #23  
Old 10-06-2018, 02:20 AM
one eye joe's Avatar
one eye joe one eye joe is offline
US Veteran
Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers  
Join Date: Dec 2008
Location: New England
Posts: 4,190
Likes: 3,543
Liked 3,996 Times in 1,627 Posts
Default

Quote:
Originally Posted by kbm6893 View Post
I have several. A 10-8, a 64, a K38 Masterpiece, a 640 no dash, and now a 681. I'd like to paint the front sights. Some youtube videos kind of suck and I get tired watching them to see if they are good. I'm looking for as bright as possible. Neon green, red, or orange would be fine. Probably leave the K38 alone. Why mess with a 60 year old gun?

I want it to be completely reversable and able to be wiped off if I get any on the finish. I will tape off the area around the sight.

So advice would be helpful!
NEON GREEN, 0VER A BASE COAT OF WHITE. THAT'S THE LAST COLOR OF THE SPECTRUM TO DISAPPEAR IN LOW LIGHT.....

APPLY IT WITH A TOOTHPICK, RATHER THAN A BRUSH......
__________________
'Nam 1968-69.DAV,VFW,NRA Inst.

Last edited by one eye joe; 10-06-2018 at 02:29 AM.
Reply With Quote
The Following User Likes This Post:
  #24  
Old 10-06-2018, 05:50 AM
OLDSTER's Avatar
OLDSTER OLDSTER is offline
Member
Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers  
Join Date: Aug 2012
Location: North Dakota
Posts: 10,146
Likes: 14,187
Liked 12,739 Times in 3,480 Posts
Default

Quote:
Originally Posted by Cocked & Locked View Post
I use fingernail polish...not on me, on the sights! My instructed me to put on a coat of white first to make it brighter.

Then I like orangish red as the top coat. Durable but will come off with nail polish remover.


Here's some on a Charter Arms Bulldog .44 special



on a Colt Commander



1917 N-frame .45



and the list goes on...
Same here; but when the color coat is dry, I apply a coat of clear " Hard Nails" ( Wally World ). I've never had issues with solvents, oils, grease, etc.
__________________
John
Reply With Quote
  #25  
Old 10-07-2018, 07:20 PM
Fide686's Avatar
Fide686 Fide686 is offline
Member
Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers  
Join Date: Dec 2016
Location: Near Canandaigua, NY
Posts: 181
Likes: 79
Liked 319 Times in 75 Posts
Default

What one eye joe said. Tennis ball green is the
Best.
__________________
Fide Et Amore
Reply With Quote
The Following User Likes This Post:
  #26  
Old 10-08-2018, 07:52 PM
twtalbot twtalbot is offline
Member
Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers Painting Front Sight on Fixed Sighted Revolvers  
Join Date: Jan 2017
Location: Central, LA
Posts: 8
Likes: 20
Liked 3 Times in 2 Posts
Default

I use Testor's model paint from the hobby shop. First white and after that dries, fluorescent pink.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Painting a 686 front sight HGK2 S&W Revolvers: 1980 to the Present 7 03-09-2017 08:26 PM
Painting the front sight shinbone S&W Revolvers: 1980 to the Present 31 03-05-2017 12:13 PM
Painting Front Sight on a Fixed Sighted K Frame kbm6893 S&W Revolvers: 1980 to the Present 30 02-13-2017 10:25 PM
Tritium front sight ONLY on a fixed-sighted revolver? dogsoldier S&W-Smithing 10 07-28-2012 10:06 PM
painting a front sight ol'gil S&W-Smithing 21 03-09-2009 07:55 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 07:58 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)