Model 41 rear sight help

Joined
Jul 4, 2017
Messages
2,335
Reaction score
7,498
Location
Ohio valley
I have a model 41 that the windage screw will not move
Sight blade when turned, either screw or blade is stripped.
Anyone know if this is same blade used on the revolvers,
I can not find one listed for a 41 this is a 7” gun from
About 1993.
Any info will be appreciated
 
Register to hide this ad
The 7" barrel takes rear sight blade 06558 and that isn't listed for any of the revolvers. Revolver rear sight part numbers start with 04xxxx, 05xxxx or 22xxxx, nothing starting with 06xxxx. The 06558 is the only blade listed for the 7" Model 41 and my S&W parts catalog shows it at .213" in height and $9.49 in price.

Stu
 
I believe but I am not 100% that a 1993 Model 41 wears the same rear sight as the entire 1961-1993 production run of the S&W Model 52 pistol.

For a 1993-made Model 41, I believe you can find any Model 52 rear sight in whole or in part to help you.
 
I believe but I am not 100% that a 1993 Model 41 wears the same rear sight as the entire 1961-1993 production run of the S&W Model 52 pistol.

For a 1993-made Model 41, I believe you can find any Model 52 rear sight in whole or in part to help you.

I will check my 52 and compare. Called S&W they could not find
A listing for it.
I gave them number Stu gave me they still could not find listing.
They are sending screw and nut free of charge. If screw is striped
And blade is ok I may be OK ,but I doubt it
 
The Model 41 with the 5 1/2" barrel would have the same rear sight as the Model 52's. The 7" barrel sight is the same as found on the Model 41 7 3/8" barrel with brake.
 
Back
Top