|
|
08-14-2020, 07:02 PM
|
Member
|
|
|
Join Date: Jan 2017
Location: Michigan
Posts: 7
Likes: 0
Liked 0 Times in 0 Posts
|
|
S&W 329 Barrel Questions
Hello,
I've been thinking about using a 329 as a donor and converting it to 45 Colt.
They use 2 piece barrels, I think someone could turn a new barrel and re-chamber the cylinder.
My question is, how is the 2 piece barrel tightened?
|
08-14-2020, 07:08 PM
|
|
SWCA Member
|
|
|
Join Date: Feb 2005
Location: Cocoa Beach, Florida
Posts: 10,584
Likes: 3,072
Liked 22,574 Times in 5,847 Posts
|
|
Why would you not simply put a existing one piece barrel on the 329 frame?
If you are looking for a snubby, I believe the 2" barrels are still availble from Numerich
__________________
"Acta non verba"
|
08-14-2020, 07:24 PM
|
Member
|
|
|
Join Date: Jan 2017
Location: Michigan
Posts: 7
Likes: 0
Liked 0 Times in 0 Posts
|
|
Quote:
Originally Posted by colt_saa
Why would you not simply put a existing one piece barrel on the 329 frame?
If you are looking for a snubby, I believe the 2" barrels are still availble from Numerich
|
I really want a 329 PD but in 45 Colt. I already have a Model 25 Mountain Gun, but a 25oz 45 Colt with a 4" Barrel sounds amazing.
|
08-14-2020, 07:50 PM
|
Vendor
|
|
|
Join Date: Jan 2010
Location: Kansas City area
Posts: 6,181
Likes: 54,365
Liked 13,589 Times in 4,281 Posts
|
|
I think on that one the barrel is tightened by a T handle plug that exactly fits the rifling. If making a new barrel, I would put holes in the front of the barrel for a pin spanner, hex in front of the shroud, nut on the front end, or some other way to tighten it without touching the rifling. It doesn't have to be exactly the same as the original when you're making your own.
With the nut on the front option (like Dan Wesson), you can adjust the cylinder gap independently of tightening the barrel.
|
08-14-2020, 08:52 PM
|
Member
|
|
|
Join Date: Jan 2017
Location: Michigan
Posts: 7
Likes: 0
Liked 0 Times in 0 Posts
|
|
Quote:
Originally Posted by Protocall_Design
I think on that one the barrel is tightened by a T handle plug that exactly fits the rifling. If making a new barrel, I would put holes in the front of the barrel for a pin spanner, hex in front of the shroud, nut on the front end, or some other way to tighten it without touching the rifling. It doesn't have to be exactly the same as the original when you're making your own.
With the nut on the front option (like Dan Wesson), you can adjust the cylinder gap independently of tightening the barrel.
|
I think they use the rifling too since there are no provisions to tighten the barrel like you mentioned. I thought about drilling holes in the front for a spanner wrench, but your idea of having a nut like the Dan Wesson is a great idea for setting the cylinder gap.
Could use a 325 Thunder Ranch and just replace the cylinder and trim and re-cut the barrel throat.
|
08-14-2020, 08:54 PM
|
Member
|
|
|
Join Date: Jan 2017
Location: Michigan
Posts: 7
Likes: 0
Liked 0 Times in 0 Posts
|
|
Found this
Last edited by Yamahawarrior89; 08-14-2020 at 08:56 PM.
|
08-14-2020, 09:25 PM
|
Vendor
|
|
|
Join Date: Jan 2010
Location: Kansas City area
Posts: 6,181
Likes: 54,365
Liked 13,589 Times in 4,281 Posts
|
|
That looks like it.
|
|
Posting Rules
|
|
|
|
|
All times are GMT -4. The time now is 06:45 AM.