Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Ammunition-Gunsmithing > S&W-Smithing
o

Notices

S&W-Smithing Maintenance, Repair, and Enhancement of Smith & Wesson and Other Firearms.


Reply
 
Thread Tools Display Modes
  #1  
Old 09-03-2020, 06:22 PM
dr. mordo's Avatar
dr. mordo dr. mordo is offline
Member
Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand?  
Join Date: Jul 2017
Location: Miami, FL
Posts: 1,677
Likes: 5,138
Liked 2,954 Times in 1,021 Posts
Default Where to get an oversized hand?

I have a M37 that doesn't lock up, and I want to try an oversized hand. However, a google search is not turning any up for some reason.

Where do you get yours?
Reply With Quote
  #2  
Old 09-03-2020, 06:26 PM
D Brown's Avatar
D Brown D Brown is offline
SWCA Member
Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand?  
Join Date: Nov 2014
Location: Central Florida
Posts: 3,158
Likes: 21,164
Liked 7,109 Times in 1,990 Posts
Default

Midway USA has them.
__________________
Dave Brown
SWCA #3279
Reply With Quote
The Following User Likes This Post:
  #3  
Old 09-03-2020, 06:27 PM
Protocall_Design Protocall_Design is offline
Vendor
Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand?  
Join Date: Jan 2010
Location: Kansas City area
Posts: 6,129
Likes: 53,433
Liked 13,435 Times in 4,240 Posts
Default

I get mine at Welcome to Power Custom.
__________________
protocalldesign.com
Reply With Quote
The Following User Likes This Post:
  #4  
Old 09-03-2020, 06:28 PM
4barrel's Avatar
4barrel 4barrel is offline
Member
Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand?  
Join Date: Jan 2012
Location: OVER the hill in TEJAS
Posts: 2,725
Likes: 13,107
Liked 4,339 Times in 1,773 Posts
Default

I got some from S&W about 6 years ago. Be sure to get it with a pin

Last edited by 4barrel; 09-03-2020 at 06:40 PM.
Reply With Quote
The Following User Likes This Post:
  #5  
Old 09-03-2020, 06:34 PM
armorer951's Avatar
armorer951 armorer951 is online now
Member
Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand?  
Join Date: May 2012
Location: Evansville, Indiana USA
Posts: 6,203
Likes: 480
Liked 11,333 Times in 3,505 Posts
Default

You might try S&W Customer service. The part number will be 0707801.

Check also to make sure your model 37 doesn't have excessive end shake.....over .002". If it does, you might try repairing the end shake first, to see if that will help with the carry up issue.

If S&W doesn't have any OS hands, measure the width of the throat area at the top of the hand that is in the gun. I may have one I could send that would be .001"-.002" over what you currently have, which may solve the problem. Standard width J series hands are typically .073" - .075". Oversized OEM's are usually in the .078" - .080" range.
__________________
Ret. LE, FA Instr, S&W Armorer

Last edited by armorer951; 09-03-2020 at 08:49 PM.
Reply With Quote
The Following 3 Users Like Post:
  #6  
Old 09-03-2020, 06:44 PM
rwsmith's Avatar
rwsmith rwsmith is offline
Member
Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand?  
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 30,907
Likes: 41,495
Liked 29,149 Times in 13,779 Posts
Default Isn't 'stretching'...

Isn't 'stretching' the old hand possible?
__________________
"He was kinda funny lookin'"
Reply With Quote
The Following User Likes This Post:
  #7  
Old 09-03-2020, 06:54 PM
armorer951's Avatar
armorer951 armorer951 is online now
Member
Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand?  
Join Date: May 2012
Location: Evansville, Indiana USA
Posts: 6,203
Likes: 480
Liked 11,333 Times in 3,505 Posts
Default

Quote:
Originally Posted by rwsmith View Post
Isn't 'stretching' the old hand possible?
Smith and Wesson revolvers carry up on the "width" of the hand at the throat, or top portion of the hand, not via the hand's OAL. "Stretching" the hand by peening would not have the desired effect.
__________________
Ret. LE, FA Instr, S&W Armorer
Reply With Quote
The Following 6 Users Like Post:
  #8  
Old 09-03-2020, 07:33 PM
dr. mordo's Avatar
dr. mordo dr. mordo is offline
Member
Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand?  
Join Date: Jul 2017
Location: Miami, FL
Posts: 1,677
Likes: 5,138
Liked 2,954 Times in 1,021 Posts
Default

Thanks for the info and tips!
Reply With Quote
  #9  
Old 09-03-2020, 07:58 PM
k22fan k22fan is offline
Member
Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand?  
Join Date: Feb 2010
Posts: 5,835
Likes: 5,161
Liked 5,242 Times in 2,483 Posts
Default

Quote:
Originally Posted by rwsmith View Post
Isn't 'stretching' the old hand possible?
In old double action Colt revolvers that have V mainsprings carry up is advanced by stretching the hand. In S&W revolvers carry can be advanced by peening the extractor's ratchet lugs. Few amateurs do that. Just like bending the frame to correct windage, I would not practice on an expensive revolver.
Reply With Quote
The Following User Likes This Post:
  #10  
Old 09-04-2020, 09:42 AM
stu1ritter's Avatar
stu1ritter stu1ritter is offline
US Veteran
Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand?  
Join Date: Jul 2010
Location: Denver, CO
Posts: 2,259
Likes: 854
Liked 4,380 Times in 1,078 Posts
Default

armorer951, would you have the nominal sizes for the K-L-N hand available also?
thanks,
Stu
Reply With Quote
The Following User Likes This Post:
  #11  
Old 09-04-2020, 09:47 AM
armorer951's Avatar
armorer951 armorer951 is online now
Member
Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand?  
Join Date: May 2012
Location: Evansville, Indiana USA
Posts: 6,203
Likes: 480
Liked 11,333 Times in 3,505 Posts
Default

I have more examples of J and K series hands, because those are the frames I serviced most often during what I'll affectionately call the "revolver era" of my police armorer service. You know, back when dinosaurs roamed the earth.

Sizes (nominal width at the throat) are as follows:
J - .073" - .075"
K, L, and N - .093" - .095"
__________________
Ret. LE, FA Instr, S&W Armorer

Last edited by armorer951; 09-04-2020 at 03:16 PM.
Reply With Quote
The Following 7 Users Like Post:
  #12  
Old 09-04-2020, 10:15 AM
ImprovedModel56Fan ImprovedModel56Fan is online now
US Veteran
Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand?  
Join Date: Dec 2002
Location: MA
Posts: 7,330
Likes: 7,502
Liked 5,556 Times in 2,547 Posts
Default

Quote:
Originally Posted by armorer951 View Post
Smith and Wesson revolvers carry up on the "width" of the hand at the throat, or top portion of the hand, not via the hand's OAL. "Stretching" the hand by peening would not have the desired effect.
Agreed, considering what little I know. Some people believe that a hand can be effectively thickened by bending it in the middle. See Brownell's Gunsmith Kinks III, pages 276-7. Others say you'll break the hand before you get it to work. My limited experience (at least once, maybe twice) is that it can work.
__________________
Formerly Model520Fan
Reply With Quote
  #13  
Old 09-04-2020, 10:57 AM
Protocall_Design Protocall_Design is offline
Vendor
Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand?  
Join Date: Jan 2010
Location: Kansas City area
Posts: 6,129
Likes: 53,433
Liked 13,435 Times in 4,240 Posts
Default

There are 2 unconventional ways to widen a hand that do work, but should be considered as emergency field fixes only until they can be redone correctly. These are NOT the professionally approved way of doing things.

One is to bend the hand very slightly to the left with it on the trigger. The hand won't bend, but the pivot pin will. This puts the hand closer to the center pin and advances the timing slightly. As the hand pushes the ratchet up, it goes out and around the ratchet when the cylinder locks.

The other way is to file or mill a small step (.002 to .003) in a block of steel. Make a hold down clamp and drill a clearance hole for the pins on the hand. The hand should sit so that the top nose part is hanging out over the step. Then clamp the hand down on the block and heat the nose area to orange and forge the nose down to the lower level. When it cools, the top of the hand will be offset by the amount of the step in the steel block. Fitting can proceed from there.
__________________
protocalldesign.com
Reply With Quote
The Following User Likes This Post:
  #14  
Old 09-04-2020, 01:14 PM
ImprovedModel56Fan ImprovedModel56Fan is online now
US Veteran
Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand?  
Join Date: Dec 2002
Location: MA
Posts: 7,330
Likes: 7,502
Liked 5,556 Times in 2,547 Posts
Default

In the method mentioned in post #12, the hand is completely removed and bent by smacking it in the middle, using a heavy machinist's hammer on a rounded-off chisel, while supporting the two ends, maybe on an open vise or something similar. This precision process is monitored with a decent vernier (or dial) caliper which measures in thousandths. In my case, it didn't need to be bent much.
__________________
Formerly Model520Fan
Reply With Quote
The Following User Likes This Post:
  #15  
Old 09-04-2020, 01:38 PM
armorer951's Avatar
armorer951 armorer951 is online now
Member
Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand?  
Join Date: May 2012
Location: Evansville, Indiana USA
Posts: 6,203
Likes: 480
Liked 11,333 Times in 3,505 Posts
Default

In my experience, bending the hand by "smacking it in the middle" will likely result in two outcomes: the hand will break or crack, or, if the bend is successful, the "reconfigured" hand will bind in the hand slot in the frame. (which will then necessitate the removal of material from the hand slot)

If the cylinder is not carrying up properly, the simple and preferred fix is a slightly wider hand, measured at the throat. Usually, only .002" - .003" of additional width is required, and this additional width can easily be accommodated by the hand slot. An oversized hand may not be necessary.
__________________
Ret. LE, FA Instr, S&W Armorer

Last edited by armorer951; 09-04-2020 at 04:42 PM.
Reply With Quote
The Following 4 Users Like Post:
  #16  
Old 09-04-2020, 05:12 PM
garbler garbler is offline
Member
Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand? Where to get an oversized hand?  
Join Date: Jan 2013
Posts: 519
Likes: 55
Liked 430 Times in 200 Posts
Default

Fitting an oversized hand is not a job easily accomplished. First off as Armorer951 said they don’t bend only break cause they are hardened as in file proof and stone only. Even if you could bend the hand in the middle think about it’s fit in the window ? Can’t imagine a critical timing part like this only riding on the high spot in the middle ? Every competition action job I did included an oversize hand carefully fitted to the extractor lugs to provide positive carry up and lockup for staging if wanted.

Localized high temp heat and a fixture such as Protocol Design notes and the hand nose or tip can be bent or offset. The hand must be fitted to the lowest lug only and the hand and window stoned fitted to provide no slop or play. Any lateral slop or play would allow the hand to push off and skip or carve up the ratchet lugs. Any hand protrusion out of the recoil shield is unacceptable and not enough is just as bad. Removing material from the hand belly will regulate depth. Again it’s a hand stoning job. For stoning a hand’s thickness I used a small surface grinder but careful hand stoning works as it should but it’s slow tedious work.

Bottom line is that fitting up a oversize or competition hand requires probably more careful fitting than any other job on these revolvers. But when done right the guns carry up and lock up are worth the effort and valued by comp shooters

Good luck
Rick
Reply With Quote
The Following User Likes This Post:
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
S&W K frame oversized hand Toyman S&W-Smithing 1 12-07-2016 01:09 PM
fitting an oversized hand szeles369 S&W Revolvers: 1980 to the Present 23 03-07-2015 11:52 AM
Oversized hand for N Frame Revolver Macintyre S&W Revolvers: 1980 to the Present 4 03-06-2015 09:20 PM
fitting an oversized hand? szeles369 S&W-Smithing 6 07-02-2011 05:32 AM
Oversized Hand for a J-Frame. austinkroe S&W-Smithing 8 01-11-2010 11:16 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 02:44 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)