|
|
09-25-2021, 01:30 PM
|
|
Member
|
|
|
Join Date: Oct 2020
Location: Toronto, Ontario, Canada
Posts: 368
Likes: 459
Liked 882 Times in 185 Posts
|
|
Removing Nickel Plating
A buddy recently came into possession of an antique S&W DA with about 45-50% of the nickel finish remaining and that's pretty tatty. Mechanically it's excellent and very nice bore and cylinder. He asked me how to remove the remaining nickel, his intention to then have it blued. I told him that original patina is integral to the value of the pistol, but he's more into shooting than collecting and he's not concerned about that. His pistol, his choice. He's pretty handy with tools and his initial thought is aggressive use of a wire wheel. NO!!! says I. Any suggestions?
|
09-25-2021, 05:04 PM
|
US Veteran
|
|
|
Join Date: Sep 2021
Location: North GA
Posts: 25
Likes: 69
Liked 42 Times in 12 Posts
|
|
No to the wire wheel. A firearm refinisher will know how to do it properly. I've been told that a plating shop can remove plating by reversing the process.
|
The Following 3 Users Like Post:
|
|
09-25-2021, 05:31 PM
|
Member
|
|
|
Join Date: Sep 2005
Posts: 7,750
Likes: 1,642
Liked 9,151 Times in 3,380 Posts
|
|
Here's a Thread from just down the page about removing Nickel Plating
Nickel removal
Don't go after it with a wire wheel. That may peel some of it away but it won't take it all off and then you left with the remaining plating to deal with anyway.
Do Not try submerging it in any kind of Acid.
That Will Not remove nickel plating. It will start to pit the steel exposed around it and if there are any pin holes in the plating the acid will get thru the plating in those area and get at the steel that way. It truely creats a real mess.
Acid can be used to strip Chrome, but it must be used in a very controlled way as once the Chrome is off,,the steel is once again a target of the acid for eating away at the steel surface.
The link to the thread will give some ideas on Cold Strip solns available and Plating Shop methods of stripping.
|
09-26-2021, 08:51 AM
|
Member
|
|
|
Join Date: Apr 2007
Location: Virginia
Posts: 8,761
Likes: 19,486
Liked 11,852 Times in 5,384 Posts
|
|
Honestly, it is likely cheaper to sell/trade the finish distressed nickel plated vintage S&W revolver and buy a good condition blued revolver. Refinishing is an expensive undertaking.
__________________
VCDL, GOA, NRA
|
The Following 2 Users Like Post:
|
|
09-26-2021, 09:02 AM
|
Member
|
|
|
Join Date: Jul 2005
Location: NC
Posts: 30,786
Likes: 57,916
Liked 53,030 Times in 16,538 Posts
|
|
Why not have the nickel removed by the shop doing the blueing?
__________________
Sure you did
|
The Following 3 Users Like Post:
|
|
10-04-2021, 10:47 AM
|
Member
|
|
|
Join Date: Nov 2010
Location: Indiana
Posts: 11
Likes: 1
Liked 9 Times in 2 Posts
|
|
I had a Hi-Power I got off Gunbroker I wanted to use for a custom project that was nickeled, I sent it to Mahovsky's in PA and they only charge 30.00 to strip it. My dealer only charged me around 25.00 to ship it so I avoided the high cost of UPS/Fedex shipping etc.
|
10-04-2021, 02:04 PM
|
Member
|
|
|
Join Date: May 2021
Posts: 488
Likes: 488
Liked 645 Times in 289 Posts
|
|
Just my opinion , but the best bet is to leave it alone and appreciate it for what it is. I have some very early M&P s and Colt New Services that shoot great but have a large degree of honest finish wear. The blend of original finish and a century or more of patina shows character and the gun will still have some collectability.
|
The Following User Likes This Post:
|
|
10-05-2021, 08:54 AM
|
|
Member
|
|
|
Join Date: Apr 2006
Posts: 17,800
Likes: 7,843
Liked 25,705 Times in 8,685 Posts
|
|
Quote:
Originally Posted by Inland7-45
Just my opinion , but the best bet is to leave it alone and appreciate it for what it is. I have some very early M&P s and Colt New Services that shoot great but have a large degree of honest finish wear. The blend of original finish and a century or more of patina shows character and the gun will still have some collectability.
|
If the gun in question is historical, highly collectible or actually has lost its finish due to a certain set of circumstances you wish to link it to - then I would absolutely agree with leaving it the way it is.
That said, if it is just a standard gun that you own, I see no advantage to leaving a flaking and ugly finish on it - none! The truth be told, if it is NOT a collectible gun, you would have an easier time selling it and probably get more for it, if it was properly and accurately refinished. Most people don't buy ugly guns - again, unless it is historically significant. YMMV
|
10-09-2021, 10:42 PM
|
SWCA Member
|
|
|
Join Date: Jun 2011
Location: Northeast FL
Posts: 5,782
Likes: 7,440
Liked 15,137 Times in 3,619 Posts
|
|
Midway USA has a video for DIY nickel removal.
Robert
__________________
Robert
SWCA #2906, SWHF #760
|
10-10-2021, 12:14 AM
|
|
Member
|
|
|
Join Date: Jan 2010
Location: N.E.Ohio
Posts: 180
Likes: 8
Liked 39 Times in 29 Posts
|
|
I would let the shop doing the restoration remove the nickle, they would have the rite process for the type of nickle on the revolver.
All nickle MUST be removed before the blueing process or it WILL ruin the bath of the salts being used.
|
|
Posting Rules
|
|
|
|
|