Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson General Topics > Smith & Wesson Competitive Shooting
o

Notices

Smith & Wesson Competitive Shooting All aspects of competitive shooting using Smith and Wesson Firearms. Including: IPSC, IDPA, Silhouette, Bullseye.


Reply
 
Thread Tools Display Modes
  #1  
Old 07-21-2020, 03:48 AM
6string's Avatar
6string 6string is offline
Member
Dry Firing tip for Revolvers Dry Firing tip for Revolvers Dry Firing tip for Revolvers Dry Firing tip for Revolvers Dry Firing tip for Revolvers  
Join Date: Mar 2012
Location: Upstate, SC
Posts: 2,000
Likes: 3,090
Liked 4,735 Times in 1,517 Posts
Default Dry Firing tip for Revolvers

Recently there was a post about risks involved in dry firing. I didn't want to hijack the thread, but wanted to pass along a little tip.
When dry firing SA, specifically for Bullseye / Precision slow fire, I press a rolled up piece of cotton fabric between the hammer and the frame.
When you dry fire this way, you'll feel the clean break of the hammer release and the hammer will travel a short distance before being softly stopped by the cotton. No hammer blow, no potential damage to the firing pin bushing, no need to even talk about snap caps.
You can really focus on your sight alignment and trigger control. Any disturbance in the former as caused by the latter is purely operator error.
You'll also come to really appreciate the amazing quality of the S&W single action "clean break". Honestly, it's better than most of the triggers on specialized target pistols.
The attached pic shows my fancy strip of cotton rag mashed into place, hammer cocked and ready to go!
With time and dedication you'll soon see your groups tighten up and your scores improve!

Jim

PS: after the hammer releases, hold the trigger back all the way before you recock the hammer. This will keep one more friction point from potentially damaging anything.
Attached Images
File Type: jpg IMG_4918.jpg (106.1 KB, 230 views)
File Type: jpg IMG_4917.jpg (106.1 KB, 181 views)

Last edited by 6string; 07-21-2020 at 03:52 AM. Reason: PS added
Reply With Quote
The Following 6 Users Like Post:
  #2  
Old 07-21-2020, 10:00 AM
Steve912 Steve912 is offline
Member
Dry Firing tip for Revolvers Dry Firing tip for Revolvers Dry Firing tip for Revolvers Dry Firing tip for Revolvers Dry Firing tip for Revolvers  
Join Date: Apr 2016
Posts: 2,444
Likes: 4,172
Liked 2,327 Times in 1,194 Posts
Default

Good tip!

I've used small pieces of bicycle inner tube for
DA semiautos, tucked into slide over end of
firing pin.

Takes the edge off the impacts.
Reply With Quote
The Following 2 Users Like Post:
  #3  
Old 07-21-2020, 10:28 AM
armorer951's Avatar
armorer951 armorer951 is online now
Member
Dry Firing tip for Revolvers Dry Firing tip for Revolvers Dry Firing tip for Revolvers Dry Firing tip for Revolvers Dry Firing tip for Revolvers  
Join Date: May 2012
Location: Evansville, Indiana USA
Posts: 6,203
Likes: 480
Liked 11,333 Times in 3,505 Posts
Default

Great idea. I use a piece of an old 3M brand "Classic" foam earplug to dry fire my model 17. Just stuff the appropriate sized piece of foam down into the top of the frame cut out provided for the hammer. When the hammer falls, it strikes the foam, which protects the firing pin and parts beyond.

I'm sure this would also work on the other revolver models with the frame mounted firing pins.
__________________
Ret. LE, FA Instr, S&W Armorer

Last edited by armorer951; 07-21-2020 at 10:31 AM.
Reply With Quote
The Following 5 Users Like Post:
  #4  
Old 07-24-2020, 10:11 AM
walter o walter o is online now
Member
Dry Firing tip for Revolvers Dry Firing tip for Revolvers Dry Firing tip for Revolvers Dry Firing tip for Revolvers Dry Firing tip for Revolvers  
Join Date: Jan 2008
Location: Hammond in U.S.A.
Posts: 2,044
Likes: 1,305
Liked 3,862 Times in 927 Posts
Default

Try a small "O"ring placed in the fraim works well also on automatics and renders the gun safe
__________________
age is just a number
Reply With Quote
The Following User Likes This Post:
  #5  
Old 07-24-2020, 08:39 PM
AzShooter's Avatar
AzShooter AzShooter is offline
Member
Dry Firing tip for Revolvers Dry Firing tip for Revolvers  
Join Date: Dec 2004
Location: Surprise, Az. USA
Posts: 1,724
Likes: 3,204
Liked 2,530 Times in 795 Posts
Default

Feel comfortable dry firing your centerfire handgun as often as you like. I often dry fire mine 1000 times a nice when I want to exercise my trigger finger. I've never had a problem in over 40 years of doing it.

For a rimfire, always make sure you are using Snap Caps or DryWall Hangers or you will damage the cylinder.
Reply With Quote
The Following 2 Users Like Post:
  #6  
Old 07-27-2020, 07:47 PM
BLACKHAWKNJ BLACKHAWKNJ is offline
Member
 
Join Date: Oct 2006
Posts: 5,761
Likes: 1,224
Liked 5,801 Times in 2,354 Posts
Default

An old time shooter showed me the folded piece of rubber years ago, although today I use snap caps. For rim fire I recommend dry wall screw anchors, cheap, the bright yellow ones are easy to see.
For semiautomatic pistols I like to use a magazine in a contrasting color, a blued handgun with a stainless or nickel one, a stainless gun gets a blue one, and dedicated solely to dry fire. In my Army days practice hand grenades, mines, etc. were always painted blue.
Reply With Quote
The Following User Likes This Post:
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Extra Length Firing Pin for New Style J - K - L -N Revolvers zpartan S&W Revolvers: 1980 to the Present 32 09-07-2015 09:13 AM
Longer firing pins for new S&W revolvers? stantheman86 S&W Revolvers: 1980 to the Present 6 04-27-2012 05:04 PM
Firing pin design on .22 revolvers. allglock S&W Revolvers: 1980 to the Present 1 04-26-2012 09:15 PM
Firing pin differences between "new gen" revolvers stantheman86 S&W Revolvers: 1980 to the Present 2 01-06-2012 07:57 PM
Dry firing 22 RF & 22 RFM revolvers? shotgun-2 S&W Revolvers: 1961 to 1980 11 10-24-2009 06:56 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 12:30 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)