M&P 15-22 Picture Thread

Arther · #**651** 05-05-2010, 04:23 AM

This is mine

rwb1971 · #**652** 05-09-2010, 04:09 PM

BARBIE FOR MEN.....

couldnt fit the kitchen sink....

ncstar 1.25-4x32 red/green
tasco 1x30 red dot
scope riser
mbus
ncstar red laser
kz end plate sling adapter
fore end sling swivel
fore end grip
winchester bi pod
fore end bipod rail adapter
single point sling
threaded barrel adapter
dpms a2 flash hider
factory sw 15-22 iron sights
rail mount flashlight mount( forgot to put the light on...dogh! )
tacticrayola

GUN PORN FOR ALL OF YOU!!

~tc~ · #**653** 05-09-2010, 04:26 PM

Does the stock retract all the way with the sling clip there?

rwb1971 · #**654** 05-09-2010, 04:36 PM

Quote:

Originally Posted by ~tc~

Does the stock retract all the way with the sling clip there?

no, it stops about 1/2 jnch bebore it.

PensFan-Drew · #**655** 05-10-2010, 01:58 PM

Here's my M&P 15-22. Painted the stock/mags/shroud myself(as you can probably tell)

Now just waiting on my Magpul MOE stock and my TruGlo red dot

Jswiney9 · #**656** 05-10-2010, 02:54 PM

Quote:

Originally Posted by rwb1971

BARBIE FOR MEN.....

couldnt fit the kitchen sink....

ncstar 1.25-4x32 red/green
tasco 1x30 red dot
scope riser
mbus
ncstar red laser
kz end plate sling adapter
fore end sling swivel
fore end grip
winchester bi pod
fore end bipod rail adapter
single point sling
threaded barrel adapter
dpms a2 flash hider
factory sw 15-22 iron sights
rail mount flashlight mount( forgot to put the light on...dogh! )
tacticrayola

GUN PORN FOR ALL OF YOU!!

holy............. cow thats a lot of stuff ya got there.

kilo6echo · #**657** 05-10-2010, 09:37 PM

Some artsy pics

iflyfish · #**658** 05-10-2010, 09:41 PM

macnamara · #**659** 05-10-2010, 09:45 PM

Nice, Kilo.

Here's my "artsy" shot.

kilo6echo · #**660** 05-11-2010, 12:55 AM

that duck emblem is killer

macnamara · #**661** 05-11-2010, 10:25 AM

Cheers mate.

justhappy2bhere · #**662** 05-11-2010, 02:33 PM

How does that VTAC light (coyote color) mount match up with the Magpul Flat Dark Earth? Looks like it does in the pics. BTW, nice toy.

Quote:

Originally Posted by idbstyler

Okay well I've been on here for a while, and I've kinda been sitting back and learning so when someone post something asking a question I can answer it with the right answer. I think I've finally finished my setup on my 15-22. The only thing I might add is a 3x magnifier behind my red dot. Here's a few pics of my 15-22 and some recent targets. Thanks

Magpul CTR
Magpul Moe Grip
Magpul rail covers
Magpul BUS
Walther PS 22 Tactical Red Dot
Tapco Vertical Grip Short
UTG Tactical OP Bipod
Viking Tactical Light Mount
Surefire G2 Light
Desert Tactical Dual Bungee Single Point Δ Delta Sling™

This is a Walther PS 22 Tactical Red Dot Sight 30mm Tube 1x 5 MOA Dot. I got it from MidwayUSA for $67 shipped. I love this red dot. The dot is a little smaller than a 5 MOA. Which i don't mind because it's a little better for longer distances. It has 11 brightness settings. On a bright bright bright! sunny day you might need to use the highest setting. I was using 7 most of the day. It co-witnesses with my MBUS. Took me only 5 shots to zero in. I highly recommend this dot for anyone out there looking to spend under a $100.

This target is at 25yds using my bipod

This target is at 25yds standing with both eyes open

justhappy2bhere · #**663** 05-11-2010, 02:53 PM

Is that a silencer or what? That's bad azz! I want one. If it's not a real silencer please tell me how and where to get one. If its real, don't sweat it. I'm not prepared to pay the stamp tax just yet. Thxs!

PensFan-Drew · #**664** 05-11-2010, 02:56 PM

Updated pic. Got my red dot/green dot yesterday so i painted the dust covers to match my shroud, stock and mags. Tell me what you guys think!

Sry for the pic it's kinda blurry. Also, I just noticed that the magpul FDE accessories look A LOT darker in the pic compared to my painted parts. In person they're practically identical...weird.

idbstyler · #**665** 05-11-2010, 05:38 PM

it actually matches up very well. There's a slight difference but you would have to sit there and stair at it for a while to notice it. thanks!

Quote:

Originally Posted by justhappy2bhere

How does that VTAC light (coyote color) mount match up with the Magpul Flat Dark Earth? Looks like it does in the pics. BTW, nice toy.

cazador505 · #**666** 05-11-2010, 10:22 PM

1st time I have posted any pics. Tell me what y'all think.

DSC02597.jpg

DSC02598.jpg

DSC02600.jpg

stratdragon92 · #**667** 05-11-2010, 11:50 PM

pretty sweet rifle. what is the forward part of the sling attatched to.

cazador505 · #**668** 05-12-2010, 01:28 AM

Quote:

Originally Posted by stratdragon92

pretty sweet rifle. what is the forward part of the sling attatched to.

The webbing runs through a hole in the rail for now. I am looking at getting a swivel for the rail.

macnamara · #**669** 05-12-2010, 12:19 PM

Job done!

I'll try and get some better pics when it stops raining here!

Ladyfox · #**670** 05-12-2010, 04:34 PM

Quote:

Originally Posted by macnamara

Job done! I'll try and get some better pics when it stops raining here!

Pretty interesting color combination you've got going. Would have selected tan accessories to go with it but, hey, it stands out and it says "MINE".

NYG60 · #**671** 05-12-2010, 11:52 PM

Hi all, here is my gun, still awaiting a new NC Star Mark lll Compact Tactical Scope 3-9x42 With Illuminated Reticle And Mini Red Dot Sight, and a Belt-Fed shroud that was just ordered.ADDICTIVE...

socalfun64 · #**672** 05-12-2010, 11:57 PM

Love all the pics. I'm gonna get some of mine up asap.

cazador505 · #**673** 05-13-2010, 12:15 AM

NYG60,

What type of stock is that?

NYG60 · #**674** 05-13-2010, 07:44 AM

Quote:

Originally Posted by cazador505

NYG60,

What type of stock is that?

Its what came with the gun, with an added 3/4 inch cheek rest(midway), and I swapped out the handle for one with a palm shelve(midway).

macnamara · #**675** 05-13-2010, 10:28 AM

Is that an upside down BAD Lever?!

NYG60 · #**676** 05-13-2010, 10:59 AM

Quote:

Originally Posted by macnamara

Is that an upside down BAD Lever?!

Its from Midway, but I forgot to put it on correctly BEFORE taking the picture

Slowhanddd · #**677** 05-17-2010, 01:40 PM

Well here it is.Still a work in progress.Slow
Hogue grip
Mag pull fore arm
Ladder rail covers
Rock mount bi-pod
Home made barrel shroud
NC Star 3x9 rubber coated scope

CoopScoop · #**678** 05-18-2010, 09:44 AM

With Barska Electro Sight

macnamara · #**679** 05-19-2010, 07:27 PM

Very nice, stratdragon92.

Here I was being arty again...

Cooper53 · #**680** 05-19-2010, 07:48 PM

Heres my 15-22 as it sits now. Sorry for the HUGE photo

Waiting on my scope, Hogue Grip In Ghillie Tan and FDE Magpul XTM covers to come in the mail. Scope is a FACOG but its in FDE and I've heard decent reviews of it. Also want to get a bipod when i have the funds and a Magpul FDE Stock either the CTR or MOE. Can you see the color scheme im going with yet?

Right now i just have a UTG Foregrip, 3 extra mags and fake can, once again waiting for funds to get a real one.

I love this thing and try and shoot as much as possible, love that its so cheap to shoot

stratdragon92 · #**681** 05-19-2010, 09:18 PM

thank you macnarmara. i really love this gun. I like your artsy photo too, lol. I took a few of those. What are your running on your rail covers. I've noticed some pics with that on it. Is it some kind of grip tape?

Cooper53 · #**682** 05-20-2010, 04:49 AM

Quote:

Originally Posted by stratdragon92

thank you macnarmara. i really love this gun. I like your artsy photo too, lol. I took a few of those. What are your running on your rail covers. I've noticed some pics with that on it. Is it some kind of grip tape?

I may be jumping the gun but almost positive, correct me if im off, but its called stipling, or something like that.

Take a soldering iron(pen type) and just go to town. Theres a thread around on an AR forum from a guy modding an A2 grip and doing this type of method.

macnamara · #**683** 05-20-2010, 08:06 AM

Strat, Cooper is right. They're Magpul XTM rail covers that I stippled. Like Coop said, get a soldering iron and "dimple" the polymer. Pretty easy. You'll end up with what I have there.

Be warned, I originally did the grips on my Glock, but it gets addicting!

stratdragon92 · #**684** 05-20-2010, 10:07 AM

very cool guys. i like the look of that alot, i may pick up an extra bag or two of xtm's and see how they turn out.

M4J0R T0M · #**685** 05-20-2010, 10:13 AM

Quote:

Originally Posted by stratdragon92

thank you macnarmara. i really love this gun. I like your artsy photo too, lol. I took a few of those. What are your running on your rail covers. I've noticed some pics with that on it. Is it some kind of grip tape?

Like stated before its a heat stippling job done with a soldering iron. I also did the grip on my EDC Glock 27 because the polymer is so slippery when you have sweaty or muddy hands. Just like Mac said, it is addicting. It doesn't take a great deal of skill to get it done, but it takes patience and a little skill to make it look "good". Be smart and test your stippling skills on an area that wont matter or even an old A2 grip. If you don't feel comfortable doing it there are several companies out there that offer it as a service.

BTW, nice looking rifle Mac. How long did it take you to stipple all those XTM's?

macnamara · #**686** 05-20-2010, 01:40 PM

stratdragon92, I love the way the XTM's really change the look of the rifle. Initially, I had some KAC covers on the 15-22's rails, but they didn't like to stay in place.

Cheers, m4jor. Took me about 15 mins per pair of XTM's.

Here's an update. The old spray job looked pink in the camera flash, so I re-hit it...

Still not finished. I want to get one of those Primary Arms T1 knock offs for it and camo that to match the rest of the rifle. Then I think this will be done.

I think.

patrickmn · #**687** 05-20-2010, 09:50 PM

Hi. This is my first post here. I've been reading the 15-22 forum for the last few months ever since I decided I wanted to get one. I finally got the threaded version, #DUA0xxx, last Wednesday after waiting nearly 2 months with the rifles on back order at the store. I've been watching this topic and finally decided to post.

Blue spring:

Addons:
3 extra 25 rd magazines (new type)
Surefire G2 held on with 1 inch Weaver rings
CenterPoint laser sight
UTG 5-position foregrip
Tasco RedDot

=========

By the way, this is my first S&W and my first black rifle, unless you count my 10/22 with all-weather stock. 1500 rounds and only 3 jams. 30 rds CCI MiniMags, 50 rds Rem. Golden Bullets, and 325 rds Federal AutoMatch with no problems, 1095 rds Federal 550 Bulk with 3 stove pipes. I call that good. So far I've only shot it at 10 yards, and at that distance it is as accurate as my other .22 rifles.

stratdragon92 · #**688** 05-20-2010, 10:44 PM

the camo job is looking sick mac! your right about the xtm's they really set the rifle off. Even the black ones make such a huge diffrence.

prostockfan · #**689** 05-22-2010, 12:57 AM

here are the latest pics of my toy.

stratdragon92 · #**690** 05-22-2010, 01:02 AM

did you paint your reciever. it looks almost dark dark green

prostockfan · #**691** 05-22-2010, 01:11 AM

Quote:

Originally Posted by stratdragon92

did you paint your reciever. it looks almost dark dark green

yep, the receivers and the rail. it's actually a very dark brown.

prostockfan · #**692** 05-22-2010, 02:03 AM

Quote:

Originally Posted by Jack_117

I still need the barrel threaded sometime in the future, I don't really like the slip-on flash hider.

M&P 15-22 Picture Thread-img_4649cut-jpg

did you have any issues with your rear take down pin detent when you put that miad grip on there. mine isn't catching the spring and putting pressure on the detent and the take down pin just falls out now.

macnamara · #**693** 05-22-2010, 10:02 AM

Quote:

Originally Posted by prostockfan

did you have any issues with your rear take down pin detent when you put that miad grip on there. mine isn't catching the spring and putting pressure on the detent and the take down pin just falls out now.

Prostock, check this out:

Guns & Coffee: More M&P15-22 and Magpul mash-up advice

prostockfan · #**694** 05-22-2010, 11:43 AM

Quote:

Originally Posted by macnamara

Prostock, check this out:

Guns & Coffee: More M&P15-22 and Magpul mash-up advice

thank you so much

Carry a .50ae · #**695** 05-22-2010, 11:49 AM

Here is a shot of mine, dont have a picture of it alone.

P51-SN95 · #**696** 05-22-2010, 07:41 PM

newer pics, still want to change the stock to a Magpul one, still debating on going black or getting the UDE color to match the XTM rail covers.

stratdragon92 · #**697** 05-23-2010, 09:39 AM

Go UDE. I like the look of your rifle. for a second I thought it was mine.

Jack_117 · #**698** 05-23-2010, 10:52 AM

Quote:

Originally Posted by prostockfan

did you have any issues with your rear take down pin detent when you put that miad grip on there. mine isn't catching the spring and putting pressure on the detent and the take down pin just falls out now.

I have the magpul grip wedge that fills the area where the spring hits the grip, and also fills the gap between the receiver and the grip.

Magpul Grip Wedge

prostockfan · #**699** 05-23-2010, 11:50 PM

Quote:

Originally Posted by Jack_117

I have the magpul grip wedge that fills the area where the spring hits the grip, and also fills the gap between the receiver and the grip.

Magpul Grip Wedge

yeah i ordered one yesterday, glad that ended up being the fix. that gap was getting on my nerves too. nice looking rifle by the way.

dakewlndn · #**700** 05-24-2010, 12:13 AM

Quote:

Originally Posted by stratdragon92

Go UDE. I like the look of your rifle. for a second I thought it was mine.

Thats what I thought too hehehe

Heres a quick UDE shot of mine

.