M&P 15-22 Picture Thread

[roadkill45]

running C-More Railways on Allchin mounts? that is what i run on my 10/22 and MKIII (which are more or less just names for designation since they really only have 1-2 Ruger parts on them any more!) VQ and up are some costly products!!

[little_airwolf]

Originally Posted by photoracer

Here is a serious Steel Challenge 15-22. Its the upper one. The bottom is an even more serious SC AR-22. I used the 15-22 from 2011 thru 2014 in Steel Challenge and Ruger Rimfire (when and where allowed until recently when they were added officially to SC). Although right now I am using a super lightweight 10/22.

Attachment 189241

Id really like to see a better pic please! I cut down the taccom handguard. Wish the taccom stock worked with the 15-22.
Mine is around 3.75lbs with trs-25
Specs would be fantastic including weight. Its nice to see someone else with ultralight builds!
Thanks

[Rob1]

when will we see the first full reveal of your super feather weight build?? the anticipation is killing me. we have seen snippets and lots of info gathering for months.....

I'm dying here

Rob

[little_airwolf]

Rob, you talking to me or Photo?

[GhostMutt]

Originally Posted by Rob1

when will we see the first full reveal of your super feather weight build?? the anticipation is killing me. we have seen snippets and lots of info gathering for months.....

I'm dying here

Rob

Maybe it floated off Here's my super light gun to tide you over

Gun_Zapper.jpg

[Rob1]

Originally Posted by little_airwolf

Rob, you talking to me or Photo?

LA,

Yours man!!

I am fit to burst !!!!!!

and it wont be pretty!!!!!!!!

[Rob1]

Originally Posted by JeepinCO

I picked up a couple of 15/22's a few months back. One for me, and one for my step daughter. I'll let you figure out which gun is hers and which one is mine..

Jeep,

I guess you is a modern man,

in touch with your fem side....

I must say I am IMPRESSED you would pick such a public way to show the world your pink powered plinker.....

Your girl got good taste there though my man, Nice set up.

I want one toooooooo...

Rob

[Paul Revere]

Simple, but effective. Probably my favorite gun of everything I own.

[photoracer]

Originally Posted by little_airwolf

Id really like to see a better pic please! I cut down the taccom handguard. Wish the taccom stock worked with the 15-22.
Mine is around 3.75lbs with trs-25
Specs would be fantastic including weight. Its nice to see someone else with ultralight builds!
Thanks

Did you hold your cursor over the thumbnail to enlarge it? I had to resize the photos size smaller to get them to download properly. I could do a much larger more detailed version with one of my DSLRs but these were done with the 5 MP camera in my smartphone.

[SVTCOBRA.5000]

Here's a few pics of mine, not quite done yet but it's getting there
~UTG Rail Covers, AFG2, Zombie Hunter Mag Catch, Zombie Outbreak Response Team Mag Release, Biohazard Takedown Pins, CAA Stock Saddle, Kineti-Tech Barrel Shroud.

[Wholagan]

New to the forum so I thought I'd post my new setup. I actually didn't mind the factory stock and grip but I did want it in FDE so I just painted them. I'm running a cheap RDS and iron sights and it works well for me to get out there and have fun. Got some FDE rail covers on the way as well.

Before:


After

[andishdi]

Mine's had a few bits recently so thought I'd upload some new pictures - ingredients as follows;

- Black MOE Edition
- Magpul Enhanced Rubber Butt-Pad 0.70"
- Magpul Cheek Riser 0.75"
- Mapgul XTM Enhanced Rail Panels
- FAB Defense T-Pod G2 Bipod Foregrip
- 2x Tactical Red Dot Scope
- Geissele G2S Trigger

Think that's it for a while... Unless I can get hold of a NDZ SBR, for sake of curiosity more than anything.

[HDHNTER]

[capx28]

Just picked up my rifle and here's my first configuration

[Joshicks]

I'm new to the forum, here's my smith

[GhostMutt]

Originally Posted by Joshicks

I'm new to the forum, here's my smith

Welcome to the forum nice handguard what is that, did you do it yourself or buy it like that? i like it alot. Is that a shortened barrel or a longer handguard? Also is that some paracord wrapped around it ?
Looking good
Happy Shooting.

[roadkill45]

take that Heathen Union Jack off of it and put on a Confederate Flag and it would be perfect!!! LOL, JK!!! Looks really nice.

[Joshicks]

It's called a wire cutter and made by 'angry gun' and I fitted it myself. It's not para cord but heavy gauge elastic.

It's not going anywhere haha. Thanks buddy

[milesmutt]

Hi all,

Been shooting handguns a long time, but finally got around to my first rifle purchase! I wanted to keep it simple, and with the cost of ammo, this was a logical choice for a first rifle.

Got this for a steal at PSA, and replaced the grip and stock with Magpul MOE parts, and added the outstanding Bushnell TRS-25 red dot. Okay, barrel shroud is a little cheesy but I don't care what people think.....it looks damn cool.

Took it out just once. Had four or five FTF's in about 170 rounds but that may have been a fluke since I just learned, after researching the cause, that I may have loaded the ammo improperly. Gonna take it out again in a couple days and see what happens!

Love my 15-22 so far!

[PeaceOfficer]

Nice one! That barrel shroud looks pretty sweet!

[milesmutt]

Originally Posted by PeaceOfficer

Nice one! That barrel shroud looks pretty sweet!

Thank you sir!

[1TommyBoy]

Originally Posted by TxShooter2k9

We need our own picture thread for the beloved 15-22, well...everybody else loves em, I had to send mine back to s&w. But I can't wait to get it back, then I'm sure I'll love it..hopefully.
But anyways, post up your pics of your 15-22, and its mods. Thanks. Here was mine before I sent it off...

Here is mine... Standard MOE Version, Vortex Red Dot, Magpul front grip, Advanced Combat Trigger (ACT) from ALG Defense, AR-15 Reduced Power Spring Kit (3.5lb - 4.5lb) from JP Enterprises - Anti-Walk Pins from JP Enterprises and Harris bipod.

Just a hoot to shoot!

[noscivic]

Here is mine. Magpul MOE stock and grip, Tacticool adapter, UTG pro handguard, Hiperfire EDT trigger, KNS no walk pins, and Eotech XPS-2

[Dr.Buzz]

I posted this on my intro thread but I'll post here too where it belongs. Love everyone's firearms, they look great!

Safety first!
Always a snap cap in the energized chamber of all my locked and stored firearms!

Vortex Sparc2 Red Dot
Mission First Tactical Backup Torch (Not going to put a surefire on this firearm)
Magpul CTR Stock
Magpul Foregrip
Magpul Gen2 Backup Front and Rear Sights
Magpul D-Ring Rail Adapter
Magpul XLT Custom Rail Covers
United Industries Quick Disconnect OD D-Ring Swivel for CTR Stock
CMC 3.5lb AR Single Stage Tactical Trigger (The stock trigger is 7lb with much creep)
The straight trigger does come with pins FYI, not sure about the curved.
Magpul MS3 Gen2 Single/Two Point Sling with locking D-Ring Clamps.
JP Enterprises Oversized Anti-Walk Trigger and Hammer Pins
NZD BAD Lever
NZD charging handle (aluminum)
Hogue mono grip
All Weather Tactical Pressure Reducing Hard-shell Case


Be safe everyone.

[PeaceOfficer]

That's a really tricked out 15-22 you got there Dr. Buzz. Nice!!

[rock1260]

Finally picked up a 15-22, traded in a Marlin 336 .35 that I never used and ended up with $5 credit for ammo. Purchased it on 8/12 since then here are the Mods made:
Keneti-tech Barrel Shroud
Magpul MBUS Sights
Bushnell TR-25
Magpul MIAD Grip
Magpul ACS Stock
Strike Industries Cobra Foregrip
S&W Mags (3) pack (great deal online from Cabela's)

Future Mods on Order:
Troy Industries Hand Rail Covers
Black Hawk Storm XT Sling
Global Pioneer QD ambidextrous Clamp On Sling Adapter

[MIKE2013]

Here is My Baby!

[Hddeuce]

Just picked this up!!

[Hddeuce]

Originally Posted by milesmutt

Thank you sir!

Who makes the shroud and what do you mean by loaded improperly?

[jagular]

Originally Posted by MIKE2013

Here is My Baby!

Nice! Just an FYI, your AFG is on backwards.

[MIKE2013]

I figured that out afterwards lol

[MIKE2013]

[Mark15/22]

New here glad to be here had my M&P15-22 for about 3 weeks now. Bought her used an good condition for $325 out the door. She has the threaded barrel, had no sights on her when bought her. She was just plan. I brought her home broke her down and gave her the cleaning of her life as she did need it.

Next I knew what I want her to ware to the prom so I started to dress her up. Now.that she is.all dressed up I will do.some small mods to her, trigger springs or a new trigger and small amount of polish. Those are the most common things I have read that is done to improve the M&P15-22 performance. Any input on this would be great. But not going to spending $600 on triggers and parts.

Below are some photo of her and her family. Also some photos of 22LR pile ammo love!! Ammo that is missing, but is in route is 300 rounds of Winchester Power Point 42 max and 2 300 rounds packs of Xmas special edition standard velocity.

Matching her to the rest of the family in stainless and black.






"22LR Goodness"
M&P15-22 and Ruger 22/45 Lite. Not pictured is my CZ 455 Varmint Evolution that is on its way to complete the 22LR gang.



Picture of the M&P15-22 and 22/45 Lite with ammo








Here is a photo of the family together

Smith & Wesson M&P15-22
Smith & Wesson SD40VE
Ruger 22/45 Lite
Sccy CPX-1

[Mark15/22]

Here is the list of current product used:

BlackHawk Knoxx Stock (custom painted)
UTAC Rail Ladders covers (custom painted)
IProTec Nebo RM190LSR light/laser combo (custom painted)
Phoenix Technology AR skeleton hand grip (custom painted)
IMI Denfense FSG1 Support Grip (custom painted)
Melrose Lekker S&W MP15-22 Barrel Shroud
UTG 3-9x32 Compact CQB Bug Buster AO scope

[GhostMutt]

Originally Posted by Mark15/22

New here glad to be here had my M&P15-22 for about 3 weeks now. Bought her used an good condition for $325 out the door. She has the threaded barrel, had no sights on her when bought her. She was just plan. I brought her home broke her down and gave her the cleaning of her life as she did need it.

Next I knew what I want her to ware to the prom so I started to dress her up. Now.that she is.all dressed up I will do.some small mods to her, trigger springs or a new trigger and small amount of polish. Those are the most common things I have read that is done to improve the M&P15-22 performance. Any input on this would be great. But not going to spending $600 on triggers and parts.

Below are some photo of her and her family. Also some photos of 22LR pile ammo love!! Ammo that is missing, but is in route is 300 rounds of Winchester Power Point 42 max and 2 300 rounds packs of Xmas special edition standard velocity.

Matching her to the rest of the family in stainless and black.






"22LR Goodness"
M&P15-22 and Ruger 22/45 Lite. Not pictured is my CZ 455 Varmint Evolution that is on its way to complete the 22LR gang.



Picture of the M&P15-22 and 22/45 Lite with ammo








Here is a photo of the family together

Smith & Wesson M&P15-22
Smith & Wesson SD40VE
Ruger 22/45 Lite
Sccy CPX-1

LOVE what you did to the 15-22 magazines

[Mark15/22]

Originally Posted by GhostMutt

LOVE what you did to the 15-22 magazines

Thank you It was a bit of work, but really liked how it turned out. Just bought 2 more mags and doing them this week.

[tacticool22]

If the forward grip is comfortable, it's on right.
Here is a happy customer pic.

[Mark15/22]

Originally Posted by tacticool22

If the forward grip is comfortable, it's on right.
Here is a happy customer pic.

Yes it very comfortable for me as I hold at that point. The grip was designed so it could be flush up against the mag housing if so desired. That is why it is not just straight up and down like other designs.

[apollolanding]

Originally Posted by HDHNTER

Mod 0 goodness! Very nice!

[HDHNTER]

Originally Posted by apollolanding

Mod 0 goodness! Very nice!

Thanks, it's a Mod H (16" rather than 18").

[shawnr5]

I got a new keymod hand guard, barrel nut adapter and Ambi charging handle from Tacticool22.com for my 15-22 pistol.

[brute]

[Mark15/22]

Small update.

Tacticool22 Fully Ambidextrous charging handle
UTG 4-16x44 scope
15-22 Anti-walk trigger pins

[IMG][/IMG]

[IMG][/IMG]

[Arthur Kill]

Originally Posted by Mark15/22

Small update.

Tacticool22 Fully Ambidextrous charging handle
UTG 4-16x44 scope
15-22 Anti-walk trigger pins

Nice Mark!

Re the mags - that's paint, right?

What did you use, the Alumn-Hyde from Brownells?

[Mark15/22]

Originally Posted by Arthur Kill

Nice Mark!

Re the mags - that's paint, right?

What did you use, the Alumn-Hyde from Brownells?

Thank you.
Yes the mags and rest are painted. It is Rust-Oleum stainless steel spray paint.

[brute]

[brute]

Just s holiday Picture for you all. Your enthusiasm has inspired me not to mention your knowledge of this firearm. Merry Christmas!

[mobilecommand]

[shawnr5]

Originally Posted by mobilecommand

Did you SBR a MOE or did you drill your lower and add QD sling swivel cups? It looks darn good.

[mobilecommand]

Originally Posted by shawnr5

Did you SBR a MOE or did you drill your lower and add QD sling swivel cups? It looks darn good.

Its a 15-22 moe that i sbred