has anyone had issues with their slings putting too much stress on the stock or shaft? i want to get one but it concerns me since the stock and lower are molded all together. any info is appreciated. thanks.
sw.jpg

Where were you going to attach your single point?

The Mrs. slipped a Viking VTAC sling into one of my Christmas presents. As I prefer a two point sling, this was just what I wanted for my 15-22.

__________________
Stu

jase3gt has a pic on page 12 of the picture thread were he used a GG&G sling adapter

i was thinking of the one with the quick release from the sling to the rifle. the ones that can just wrap around or through the stock with whatever harness. i just don't want it to be to stressful and crack/break the lower/stock.
base_media.jpg

Have you ever operationally used a single point sling? They're horrible if you need to move. You have to hold onto the rifle or it flops everywhere.

A two point sling can be tightened so it's not flopping around when you have to move and most have a quick adjust for body armor and heavy jackets.

The front needs a sling mount on the rail. I've used both swivels and fixed. I favor fixed.

Standard M4:


M&P 15 quick fix:



The rear is just threaded thru the stock.



-- Chuck

Chuck . . .
Did you re-position the sling swivel on the 15-22 stock?

And if so, how?

thanks,

__________________
Ralph T
NRA Benefactor Member

The rear swivel (which doesn't swivel, of course!) can be turned 90° and reattached. Takes a little filing on one edge for it to work. Three minutes.

No longer on the rifle at all as it's pretty useless on the side like that, the rifle wants to take a strange twist on me.

-- Chuck

What device did you put on the front end as a swivel attachment? The one I bought doesn't work. Think it is for an AR barrel. Thanks.

Any number of rail mounts for slings are available.

-- Chuck

I got mine from GG&G.....it has since been move to the support side rail and has a Viking Tactical sling attached to it.

__________________
Stu

Hello all,
im new here so forgive me. I am wondering I have a 15-22 and I wanted to put a single point sling mount for a paraclip. I was wondering if anyone could point me in the right direction. oh im also broke so cheap as possible! well cheap now but I will upgrade.

Something like this will probably work. Check to make sure it fits paraclips.

404 - Document Not Found

__________________
686/M&P9 Pro/M&P15X/M&P15-22

wont work the 15-22 is a molded tube and lower is all one piece so needs to be "clamp on" but not sure what one to buy. I seen one by Blackhawk and reviews said it wouldn't tighten enough. so im kinda in limbo now

Look again, that one is a clamp on style .

Or there is this 404 - Document Not Found

I'm not sure if that's the one from Blackhawk you were looking at, but a couple people in the reviews mention using it ok on the 15-22. I don't think the paraclip will fit it, but it will take a QD connector like Amazon.com : UTG Heavy Duty Push Button QD Sling Swivel, 1.25-Inch Loop : Gun Swivels : Sports & Outdoors@@AMEPARAM@@http://ecx.images-amazon.com/images/I/41t%2BcNqWiwL.@@AMEPARAM@@41t%2BcNqWiwL that you could then clip the paraclip to.

__________________
686/M&P9 Pro/M&P15X/M&P15-22

ok thanks!! im sorry im new and I don't know how to contact everyone and im not sure how/were to get into the proper areas to post. thanks again for all your help!!!