Magpul MOE stock

[BPD4]

I have a magpul moe flat dark earth stock on my 15-22 i want to put a swivel on the bottom part of the stock where there is a hole already in the bottom corner. any ideas help?

[spoolinitup33]

Originally Posted by BPD4

I have a magpul moe flat dark earth stock on my 15-22 i want to put a swivel on the bottom part of the stock where there is a hole already in the bottom corner. any ideas help?

What exactly is your question?

[mrasgt]

It seems like OP has an MOE version of a 15-22. If so, there are round swivel mounts installed by the factory just behind and down from where the rifle breaks open.

These rifles come with the swivels and round metal snap ins for the swivels.

Uncle Mikes sells a pair of pop in swivels with the bases to put in the hole.

My guess is some one lost the the snap swivels along the way, all OP needs to do is order replacements from Uncle Mikes.

I have a non MOE that I drilled for snap swivels and their mounts. Came out perfect. I used Brownell's two part adhesive to cement the bases in the hole to both sides, and they aren't coming out. The swivels activate by pushing the button on the center of the swivel and pulling. The metal bases stay behind. This lets you pop on and off single or double strap adaptations for others to use or to just release the rifle. If you wanted, you could use these snaps for single point slings with bungee and HK hooks. Some folks like em, so folks don't.

I have my work AR outfitted with a single mount swivel and with proper training, can avoid some of the problems noted nearby in other posts, I would not carry my rifle any other way.


my .02 cents

Regards to you all.




I hope this helps.

Regards,

[BPD4]

the bottom corner of the stock theres a hole, i want a swivel there

[antifederalist22]

Originally Posted by BPD4

the bottom corner of the stock theres a hole, i want a swivel there

If you want a QD swivel then you need the CTR version - it has a QD swivel hole at the rear behind the adjustment lever, otherwise you can just run the sling strap through any one of the existing MOE slots.

http://cdn.magpul.com/images/uploads/4_274_popup.jpg

[MPLUSM]

Hope this helps - I started down this road (specifically a QD swivel) and eventually found myself landing here:

Rainier Arms, LLC™ | Browse | Carbine Sling Mounts | MI Quick Detach End Plate Sling Adapter







-Michael


PS. Here's the original thread:

15-22 compatible with M.I. End Plate Adapter?

[RGERBER875]

Originally Posted by BPD4

I have a magpul moe flat dark earth stock on my 15-22 i want to put a swivel on the bottom part of the stock where there is a hole already in the bottom corner. any ideas help?

I know what you want, me too, I think I will put a ring, because I have clips on my slings so I can take them off easy

[BPD4]

Originally Posted by RGERBER875

I know what you want, me too, i think i will put a ring, because i have clips on my slings so i can take them off easy

that is what i am looking for

[RGERBER875]

Originally Posted by BPD4

that is what i am looking for

This is where I buy my snaps for my slings, I have not looked for rings yet, they may have them. let me know what you find.
Snap Hooks of all types, sizes and finishes.